Your cart is currently empty!
Dobinsons SE29-575 Rear Extended Sway Bar Link Kit | Jeep Gladiator
- Fits Jeep Gladiator JT 2020+
- Recommended for a Jeep with 2″ of lift
- Required for a Jeep with 3″ of lift
- Heavy Duty design with high quality ball joint ends for long life
- Fits and installs the same as OEM, but with added length so that the stock sway bar still functions normally at a lifted height without reducing wheel travel
- Sold as a pair, enough for 1 vehicle
$90.00
In StockDescription
Pair of Dobinsons SE29-575 Rear Extended Sway Bar Link Kit | Jeep Gladiator Jeep Gladiator JT 2020+.
- Fits Jeep Gladiator JT 2020+
- Recommended for a Jeep with 2″ of lift
- Required for a Jeep with 3″ of lift
- Heavy Duty design with high quality ball joint ends for long life
- Fits and installs the same as OEM, but with added length so that the stock sway bar still functions normally at a lifted height without reducing wheel travel
- Sold as a pair, enough for 1 vehicle
Many people don’t realize that when lifting their vehicle, the sway bar angle because a lot steeper than normal, and this actually affects the wheel travel and ride comfort inside the vehicle. The sway bar links are literally stretched out and causing a type of binding on the rear sway bar not being able to do its job properly. By changing out the original swaybar links to the Gladiator rear swaybar links by Dobinsons, you can set the angle back to a more neutral position, gaining wheel travel, gaining ride comfort, and also helping the swaybar to properly assist the vehicle in keeping it more level when cornering. These Gladiator rear swaybar links should be used at any lift height of over 2″ so that you get the proper articulation from your new suspension kit, and are required with a lift height of 3″ or more. You’ll also notice that if you don’t have longer sway bar links installed, reinstalling the original links can be quite difficult as they’re very tight on a lifted Jeep.
Related products
-
Dobinsons
Dobinsons Rear Adjustable 4Runner Panhard Rod | 4Runner FJ Cruiser GX470 GX460
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and GX460
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Re-centers the rear axle after lifting
- Zinc plated steel and E-coated with high quality rubber bushes installed
- Off-car adjustable, cannot be set while fully installed
- For 45mm (1.75″) of lift or more
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
$345.00 Add to cart -
ExceptionsShips FREE !!
within 48 US StatesDobinsons MRA59-A575 3-Way Adjustable MRA Long Travel Rear Shocks Pair
- Suits 2003-2024 4Runner (4th and 5th Gen), All FJ Cruisers, Lexus GX470 & GX460 without KDSS, Toyota Prado 120 & 150, suitable for 2 – 3.5″ of lift
- CANNOT BE USED WITH KDSS
- 3-way adjustable valving – adjust high and low speed compression and rebound
- MRA59-A575 – Specifications. 730mm extended, 443mm compressed
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Shock Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Can Use with Timbren Rear Bump Stop Kit
- Replacement Brake Lines are required: Extended Brake Lines
- Bump stops extensions or longer bump stops are required!!
- Full 2 year limited warranty, no set rebuild time period
- Now comes with a longer hose and different mounting instructions
$1,280.00 Add to cart -
Dobinsons
Dobinsons C59-300 Front Lifted Coil Springs for Toyota 4×4 Trucks and SUV’s
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 385mm free height, 17mm wire diameter, 586LBF/IN Spring Rate
$270.00 Select options -
GX460 (2010-2023)
Dobinsons 1.5-3.5″ Lift Kit for Lexus GX460 2010 to 2023 (all options)
- Every suspension option from Dobinsons to lift your Lexus GX460 all on one page
- Here you can lift from a low height up to the maximum bolt-on lift height by making your selections below
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front Twin Tube Struts, 2 Rear Twin Tube Shocks, and 4 Coil Springs
- You can choose to upgrade to the higher end IMS or MRA struts and shocks on this page in the drop down menus
From $1,200.00 Select options