“Dobinsons SC59-002 Pair of Strut Top Plates” has been added to your cart. Continue shopping
You may be interested in…
-
GX470 (2002-2009)FREE SHIPPING
within 48 US StatesDobinsons 1″ to 3.5″ Lift Kit for Lexus GX470 (All Options)
- Full Dobinsons Complete Suspension kit for Lexus GX470 from 2003 to 2009, with every possible option listed on one page
- Lift from 1.0″ up to 3.5″ from the selections below
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Rear coils are optional in case you want to keep your airbags or stock coils in place
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front Twin Tube Struts, 2 Rear Twin Tube Shocks, and 4 Standard Coil Springs
- Select the type of struts and shocks you want as well as all possible add-ons down below
- Choose from Dobinsons Classic Twin Tube shocks, IMS Monotube, or MRA 3-way adjustable remote resi shocks
- See note below in description about KDSS models
(15 reviews) -
FirestoneFREE SHIPPING
within 48 US StatesFirestone 2900 Air Command Air Compressor System
- Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
- Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
- Provides An Instant Air Source For The Air Helper Springs Or Accessories
- Single Point Fill (Both Air Springs Fill To The Same Pressure)
- Light Duty Compressor Specs (100 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)
- Electric analog gauge and a single toggle switch (includes housing for easy installation).
- Plug and play wiring harness.
- 30ft of 1/4″ tubing. All required hardware for installation.
- No-Drill Mounting Plate
- Limited 2 Year Warranty
- Dash Panel Style: Controls Two Air Springs Simultaneously
- Type: Heavy Duty
- Maximum Pressure (PSI): 100 Pounds Per Square Inch
- Operation Type: Switch Operated
- Estimated Install Time (Hours): 2
- Installation Manual
(0 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US States2005-2023 Tacoma Engine Skid Plate – Steel Black Powder Coated
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Covers from the front bumper down to the first cross member
- 3/16-inch steel – Black Powder Coated Steel
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Made in the USA
- Installation Instructions
(7 reviews) -
Trail-GearFREE SHIPPING
within 48 US StatesTG Diff Drop Kit | Toyota and Lexus Trucks & SUV’s
- Solid aircraft-grade 6061-T6 aluminum spacers
- Zinc-plated Grade 8 hardware
- Aluminum spacers and longer zinc-plated Class 8.8 bolts to move the stock skid plate down
- TRD Pro models may require different length bolts due to variations from Toyota
- Fits the following applications:
- Toyota Tacoma 2005-2023 (All Engines)
- Toyota FJ Cruiser 2007-2014 (All Engines)
- Toyota 4Runner 2003-2024 (All Engines)
- Lexus GX470 (all years)
- Lexus GX460 (all years)
- Toyota Hilux Vigo (all years)
- Toyota Hilux Revo (all years)
- Toyota Fortuner (all years)
- Made in USA
(9 reviews) -
Tundra 2nd Gen (2007-2021)FREE SHIPPING
within 48 US StatesDobinsons GS59-710 Pair Ext Travel Struts for Sequoia 08-22 + Tundra 07-21
- Suits 2008-2022 Toyota Sequoia and 2007-2021 Toyota Tundra
- These are extended travel. They have a “droop spacer” that should be removed for low lift heights so that the coil stays captured
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS59-710 Specifications: 615mm extended, 445mm compressed lengths, 54mm body size
- Sold in pairs
(10 reviews) -
GX460 (2010-2023)FREE SHIPPING
within 48 US StatesDobinsons 1.5-3.5″ Lift Kit for Lexus GX460 2010-2023 (all options)
- Every suspension option from Dobinsons to lift your Lexus GX460 all on one page
- Here you can lift from a low height up to the maximum bolt-on lift height by making your selections below
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Rear coil springs are optional, in case you want to keep the factory rear ride height
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front Twin Tube Struts, 2 Rear Twin Tube Shocks, and 4 Coil Springs
- You can choose to upgrade to the higher end IMS or MRA struts and shocks on this page in the drop down menus
(11 reviews) -
Dobinsons
Dobinsons Pair of Strut Top Plates for Toyota Tundra 07-21 Sequoia 08-22
- Made specifically for the 4×4 Toyota Tundra from 2007-2021 and Toyota Sequoia from 2008 to 2022
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold in pairs
- Photo for illustration purposes
(7 reviews) -
Upper Control Arms
Pair of UCA Pivot Bolts and Nuts | Toyota and Lexus
- This is a pair of factory size upper control arm pivot bolts and nuts replacements to service two control arms
- Commonly referred to “as the long UCA bolt”
- Services both control arms at once
- Does not come with any washers. New aftermarket UCA’s usually come with the necessary washers
- Vehicle Fitment
-
- 2003-2009 Toyota 4Runner
- 2010-2024 Toyota 4Runner
- 2005-2015 Toyota Tacoma
- 2016-2023 Toyota Tacoma
- 2006+ FJ Cruiser (all years)
- 2003-2009 Lexus GX470
- 2010-2023 Lexus GX460
- Toyota Hilux Vigo
- Toyota Hilux Revo
- Toyota Fortuner
- Toyota Prado 120
- Toyota Prado 150
- Bolt Grade: 10.9
- Head Drive Type: Hex
- Length: 351 mm
- Material: Steel
- SAE or Metric: Metric
- Thread Diameter: 14 mm
- Thread Length: 28.7 mm
- Thread Size: 14 mm
- Thread Type: Fine
(4 reviews) -
Tundra 2nd Gen (2007-2021)FREE SHIPPING
within 48 US StatesDobinsons MRA59-A710 3-Way Adjustable MRA Front Struts Pair | Tundra + Sequoia
- Suits 2007-2021 Toyota Tundra and 2008-2022 Toyota Sequoia
- Pair of Struts only, no coils included and not preassembled
- If you’re looking for an assembled set of coilovers, those are here: Assembled Coilovers for 2007-2021 Tundra
- 625mm extended length, 450mm compressed length
- Height adjustable with a fully threaded body
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Requires lower mount clearancing to fit the larger lower leg of the new coilover (see attached photo)
- See attached photo for correct hose routing, can vary depending on UCA’s used
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware and Sticker Pack
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs – sold separately
- Front coilover assembly instructions
- New UCA’s are required for proper coilover and hose clearance, see all options
- Aftermarket wheels with +18 Offset or less REQUIRED to avoid reservoir + hose rubbing at full lock
- Link to recommended 16″ coils with a 3″ inner diameter and 650LB Spring Rate
- Link to add assembly labor charge, so that when you buy these struts and the coils, you can have them preassembled before shipping
(12 reviews) -
Upper Control ArmsFREE SHIPPING
within 48 US StatesDobinsons Billet Aluminum Adjustable UCA’s Pair | 4Runner FJ Cruiser GX470 GX460
- Super strong billet aluminum front upper control arms (UCA’s) for Toyota and Lexus SUV’s
- Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and Lexus GX460
- Complete kit for both left and right hand side, fully assembled with ball joints pressed in
- High clearance design to clear pretty much every coilover size available
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- Adds 2 or 3 degrees of added caster, and caster can be further adjusted
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- Installation Instructions
- Video on YouTube showing features and Installation
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
- Replacement Ball Joints can be ordered here
(8 reviews)
Cart totals
| Subtotal | $6,295.24 |
|---|---|
| Shipping |
Shipping to FL. |
| Tax | $480.28 |
| Total | $6,883.52 |
