Your cart is currently empty!
Exit Offroad - The Ultimate Resource for Dobinsons Suspension in the USA
What we Offer
-
Sale!
AwningsFREE SHIPPING
within 48 US StatesOVS Nomadic 270° Awning & Wall 1 + 2 + 3 + Mounting Brackets – Passenger Side
- Passenger Side Application
- Includes awning, and Walls 1, 2, and 3. See below for further information
- 129 Square Feet of Freestanding Covered Shelter
- 600D Poly Cotton Rip-Stop Cover
- Boxed Aluminum Rafters
- Pivoting Aluminum Adjustable Poles
- Tie Down Points for Securing Poles and Water Run Off
- 1000G PVC Travel Cover
- 10 Lb Zipper
- Ballistic Nylon Tie Downs With S Connects and Buckle
- Shock Cord With Retention
- Zippers To Secure Enclosed Shelter
- Heavy Duty Oversized Stakes
- Download Instructions
(8 reviews) -
Sale!Bronco (2021-2024+)
RCI Full Skid Plate Package | 2021+ Ford Bronco 2/4 Door
- Suits 2021+ Ford Bronco 2 door and 4 door models – Does not suit Bronco Sport models
- Includes engine (two piece), transmission and transfer-case skid plates.
- Protects expensive EPAS power steering unit, front differential, front cross-member, engine, engine bay, intercooler, sway bar disconnect (if applicable),, transmission, exhaust, oil pan, transfer-case, and more!
- Compatible with 4×4 and Raptor models
- Simple installation and removal of all subsections for maintenance
- Extremely high clearance hugs the truck very tight and does not sacrifice ground clearance for protection
- Smooth, flat surface that easily slides over obstacles
- Steel version-black epoxy powder coated for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- *May Not be Compatible with all 4+” Lift Kits (drop bracket kits)
- Made in the USA
(9 reviews) -
Sale!Tacoma 4th Gen (2024+)
2024+ Tacoma Skid Plates Package from RCI
- For 2024+ Toyota Tacoma 4th Gen
- Includes engine, transmission and transfer-case skid plates.
- Protects front two cross-members, low hanging front differential, oil pan, transmission, second and third cross-members, exhaust cross pipe, and transfer-case
- Excellent addition or replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Built in oil drain hole allows easy access and ability to change oil without removal of plate
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat standard on steel skid plates for a rust resistant, durable and high quality finish
- Hardware included
- Direct bolt on addition to existing factory attachment points, no drilling required!
- Please note that some images show our A-Arm skid plates however they are not included with the skid plate package
- Verified to fit 4×4 TRD Offroad non-hybrid models. Suspected to fit other models, but not yet verified
- MADE IN LOVELAND, COLORADO, USA
(0 reviews) -
Sale!All Pro OffroadFREE SHIPPING
within 48 US StatesDriver Side Engine Bay Accessory Tray for 2010-2019 4Runner
- Suits 2010-2019 Toyota 4Runners
- Slot size fits 1/4-inch or M6 hardware (hardware not included)
- 12-gauge SAE 304 Stainless Steel
- Zip-tie slots provided for securing wire & cables (zip ties not included)
- M8 JIS Mounting Hardware included
- Bolt-on installation, no welding or drilling required
- NOTE: Will not work on 2020+ 4Runner models.
- Installation Instructions
- BUILT 100% IN THE USA!!
(7 reviews) -
Sale!Tundra 2nd Gen (2007-2021)
RCI Full Skid Plate Set | 07-21 Tundra & 08-22 Sequoia
- Suits 2nd Gen Tundra (2007-2021) and Sequoia (2008-2022)
- Includes front, transmission/transfer-case skid plates
- Protects power steering unit, front differential, front cross-member, engine, engine bay, and radiator
- Mounts to radiator cross-member without interfering with aftermarket bumpers, hidden winch, etc.
- Excellent replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Easy access to oil filter by removal of access door using only two bolts
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat standard on steel skid plates for a rust resistant, durable and high quality finish
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made to order
- Made in the USA
(9 reviews) -
Sale!Rooftop TentsFREE SHIPPING
within 48 US StatesOverland Vehicle Systems Sidewinder Aluminum Roof Top Tent – Side Opening
- Base Material: Aircraft Grade Aluminum
- Body: Premium 600D Rip Stop Polyester Canvas Waterproof Material
- Window Screens: 120G Environmental Fadeless Breathable Gaze
- Mattress: 2” High Density Foam
- Anticondensation Mat: Yes @ ¾” Thick
- Base: 1” Aluminum Honeycomb Insulated
- Inside Storage: Oversized Storage Loft
- Base Storage: 2 Built in Storage Bags
- Closed Dimensions: 91” x 55.5” x 8”
- Open Dimensions: 91” x 55.5” x TBD”
- Sleeping Area: 86” x 50”
- Sleeping Count: 2 -3
- Unpackaged Weight: 185 LBS
- Shipping Weight: 250 LBS
- Hardware Included: Yes
- Storage Rack Included: Yes
- Struts: 2x Nitrogen Gas Charged Struts, 35.5” x 1” 400N. 1x Telescoping Interior Strut
- Pull Down Strap: Ballistic Nylon
- Handles: Aircraft Grade Aluminum
- Seal: Military Specked Waterproof Grade
- Set Up: Less than a Minute, Easiest of all Roof Top Tents
- Put Away: Less than a Minute, Easiest of all Roof Top Tent
- Storage: Enough interior space to store bedding when closed
(8 reviews) -
Sale!Accessories
RCI 5th Gen 4Runner Full Length Aluminum Roof Rack
- RCI 5th Gen 4Runner Full Length Aluminum Roof Rack – suits 2010-2024 models
- Mount anything from lights, Hi-lift jacks, roof top tents, shower systems, Maxtrax, quick-fist, roto-pax, spare tire, bike mounts, roof baskets, etc
- Heavy duty design will easily support roof top tents and heavy gear
- 1/4″ 5052 aluminum laser cut side panels and rear fairing, 1″x 2″ black anodized T-slot cross-bars, 1/8″ 5052 front fairing
- T-Slot comes machined to accept nut plates and carriage bolts to simplify installation of accessories without ever having to remove bars
- Front wind fairing matches the contour of the roof and windshield for a superior fit and finish and improved aerodynamics
- Includes rubber trim and all necessary hardware for installation
- Our rack is the only one on the market that utilizes injection molded rubber mounting blocks that lift and cushion the roof rack mounting feet AND completely seal out moisture without the need for silicone!
- Built in side panel slots allow unlimited options for adding accessories such as handles, side lighting, awning mounts, and more
- Entirely bolt on design utilizes existing roof rack mounting holes and rubber load bearing pads at front of rack.
- Rack is only 3″ above highest point of the truck (not including antenna)
- Does NOT require the removal or alteration of roof antenna
- Industry standard T-slot cross-bars are compatible with hundreds of accessories
- Heavy duty black textured powdercoat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer for an exponentially more durable finish
- Includes black stainless steel hardware, and trim. We don’t charge extra for high quality hardware
- Easy bolt together assembly, takes about 45 minutes to install
- All hardware and installation instructions provided
- Weighs ONLY 54lbs
- Made in the USA
(3 reviews) -
Sale!All Pro OffroadFREE SHIPPING
within 48 US StatesToyota Tacoma Overland Tailgate Table | 2005-2023
- The stock tailgate panel is a wasted opportunity that you can easily correct with the All-Pro Off-Road Overland Tailgate Table.
- The All-Pro Off-Road Overland Tailgate Table turns your opened tailgate into a multi-functional platform for all of your overlanding, camping, fishing, and hunting needs.
- The durable food-grade polyethylene cover can be used as a cutting board while supporting your favorite camp stove.
- A slot on the left side and cup-holders on the right side prevent items from rolling away.
- Requiring only basic hand tools, reusing original hardware, and 3-minutes of time, this is one of the easiest modifications you will ever make on your truck and one every Tacoma owner should do.
- Made in 2 different styles, choose from the divided cutting board configuration, or the smooth configuration with only round cutouts on the end.
- Thickness is right at 1/2″
- Scroll down on the page to see a full product video!!
- Made in the USA, in sunny California!!
(6 reviews)
-
4Runner 5th Gen (2010-2024)
Dobinsons 4Runner IMS Suspension Kit for 2010-24 (1-3.5″)
- Suits Toyota 4Runner 5th Gen 4×4 from 2010 to 2024, with or without KDSS
- If you have a 2WD model, add 1″ to the listed lift heights of the front coils due to the lighter front weight of the vehicle
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Dobinsons have the largest selection of front and rear coils for 4Runners and in multiple colors
- Add up how much accessory weight you have on the front and then the rear, that’s your constant load
- Then choose the lift height from the coils that most closely matches the added weight
- Fully rebuildable and re-valvable shocks and struts
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Option to have the front struts preassembled prior to shipping to make installation easier at home
- Base Kit Includes 2 Front IMS Monotube Struts, 2 Rear IMS Monotube Shocks, and 4 Coil Springs – Select your preferences
- You can go from a standard suspension to full long travel with all the options listed here
- The more lift height you add, the more parts you need, so read the subsection headings below
- Suspension Installation Video
(23 reviews) -
Suspension
Dobinsons Lift Kit for Toyota 4Runner 4×4 2003-2009 (All Options 0-3.5″)
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- If you have a 2WD model, add 1″ to the listed lift heights of the front coils due to the lighter front weight of the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Price Includes 2 Front Twin Tube Struts, 2 Rear Twin Tube Shocks, and 4 Standard Coil Springs
- For information and specs on the products in the drop down lists below, select an item, then click the small square box that will appear to the right to be taken to that product page
- You can choose from Dobinsons Classic Twin Tube Shocks, IMS Monotube, or MRA remote resi shocks with 3-way valving adjustment
(12 reviews) -
4Runner 5th Gen (2010-2024)
Dobinsons Build-A-Kit Toyota 4Runner 2010-24 (All Options 1-3.5″)
- Suits Toyota 4Runner 5th Gen 4×4 Models 2010-2024, with or without KDSS
- If you have a 2WD model, add 1″ to the listed lift heights of the front coils due to the lighter front weight of the vehicle
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Add up how much accessory weight you have on the front and then the rear, that’s your constant load
- Then choose the lift height from the coils that most closely matches the added weight
- Dobinsons Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel, linear rate
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Dobinsons have the largest selection of front and rear coils for 4Runners and in multiple colors
- Base Kit Includes 2 Front Twin Tube Struts, 2 Rear Twin Tube Shocks, and 4 Coil Springs – Select your preferences
- You can go from a standard suspension to full long travel with all the options listed here
- The more lift height you add, the more parts you need, so read the subsection headings below
- Learn more about the 3 different shock types on this blog post
- Suspension Installation Video
- All Dobinsons parts have a full 2 year warranty
(23 reviews) -
Suspension
Dobinsons Tacoma Lift Kit for 2005-2023 4×4 (all options)
- 4×4 Access Cab models come with 1″ front lift from the factory. Lift heights listed are for Dual cab 4×4 models. Subtract 1″ for access cab models
- Long bed models require the next step up in leaf spring, or they will sit 1″ less high. L59-110-R lift only 1″ on long bed models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Choose your desired suspension parts to build the kit best suited to your weight and desired lift height
- Multiple different leaf springs options to match up with the added weight you’ve put on your truck or not
- Choose from classic Twin Tube Shocks, IMS Monotube, or MRA 3-Way Adjustable Remote Resi Shocks
- Read this to learn about the shock differences – Shock Types
- Base kit usually starts with front coils, struts, rear leaf springs, poly bush kit, rear shocks, 1 pair greasable pins. You choose what you want
- Common installation instructions related to parts on this page
(12 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons 0-3.5″ Lift Kit Builder | Toyota Land Cruiser 80 Series (inc all shock options)
- Suits Land Cruiser 80 Series and Lexus LX450
- Choose your coils and load carrying ability, anywhere from 0″ up to 3.5″ of Lift
- The more you lift, the more parts and pieces are needed for proper performance
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to match OE fitment specs
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- Choose from Twin Tube, IMS Monotube, or MRA 3-Way adjustable remote resi shocks
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit includes front and rear coils and shocks, you can add any other parts you need
- Read more about the 3 different shock types
(13 reviews) -
4Runner 5th Gen (2010-2024)FREE SHIPPING
within 48 US StatesDobinsons 3-Way Adjustable MRA 4Runner Lift Kit | 2010-24 (1-3.5″)
- Suits Toyota 4Runner 5th Gen 4×4 from 2010 to 2024
- If you have a 2WD model, add 1″ to the listed lift heights of the front coils due to the lighter front weight of the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Add up how much accessory weight you have on the front and then the rear, that’s your constant load
- Then choose the lift height from the coils that most closely matches the added weight
- Dobinsons have the largest selection of front and rear coils for 4Runners and in multiple colors
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front MRA Struts, 2 Rear MRA Shocks, and 4 Coil Springs – Select your preferences
- You can go from a standard suspension to full long travel with all the options listed here
- The more lift height you add, the more parts you need, so read the subsection headings below
- Resi Installation Installations of Front, and Rear
- Front height adjustment instructions
- Suspension Installation Video
(7 reviews) -
Suspension
Dobinsons IMS Lift Kit for Toyota 4Runner 4×4 2003-2009 (0-3.5″)
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- For 2003-2009 Toyota 4Runner 4×4
- If you have a 2WD model, add 1″ to the listed lift heights of the front coils due to the lighter front weight of the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Shocks are Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Watch the video on IMS here: https://youtu.be/Npfx40VD3kM
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Price Includes 2 Front IMS Struts, 2 Rear IMS Shocks, and 4 Standard Coil Springs
- For information and specs on the products in the drop down lists below, select an item, then click the small square box that will appear to the right to be taken to that product page
(20 reviews) -
Suspension
Dobinsons 3-Way Adjustable Tacoma MRA Lift Kit for 2005-23 4×4 (0-3.5″)
- 4×4 Access Cab models come with 1″ front lift from the factory. Lift heights listed are for Dual cab 4×4 models. Subtract 1″ for access cab models
- Long bed models require the next step up in leaf spring, or they will sit 1″ less high. L59-110-R lift only 1″ on long bed models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Dobinsons MRA front struts are height adjustable by a fully threaded body
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- Extended Travel Fronts – 567mm extended, 417mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat up front
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes front vehicle-specific resi brackets, rear includes resi brackets that get mounted to the frame as shown in the photos
- Coilover adjuster wrench is included for the fronts
- Choose your desired suspension parts to build the kit best suited to your weight and desired lift height
- Multiple different leaf springs options to match up with the added weight you’ve put on your truck or not
- Base kit includes front coils, front struts, rear leaf springs, and rear shocks, then you choose all of the desired add-ons from there, as well as the selections of each under the submenus
- For installation instructions, click here
(11 reviews)
-
Tire and WheelFREE SHIPPING
within 48 US StatesDigital Tire Deflator + Digital Tire Gauge + and 53pc Tire Repair Kit Combo Kit
- Our Recovery Gear and Air management Systems are some of the best in the business! Now you get the best of both worlds with our Combo Kits!
- Tire Repair Kit
- Digital Tire Gauge
- Digital Tire Deflator
(3 reviews) -
Rear DrawersFREE SHIPPING
within 48 US StatesOVS Camp Kitchen Box With Slide Out Sink, Cooking Shelf and Work Station
- OVS Camp Kitchen is just like a cargo box that can be bolted down to your floor or on top of your base plate system
- Color: Black
- Slides: 3 Slides
- Lockable: Yes
- Mounting Rows: 3
- Mounting Holes: 18
- Body Material: Aircraft Grade Aluminum
- Hardware Material: Marine Grade Stainless Steel
- Securely Hold a Refrigerator: Yes
- Anchors Pins Included: Yes, QTY 4
- Tie Down Straps Included: Yes, QTY 4
- Cutting/Prep Board: Yes
- Food/Water Collapsible Sink: Yes
- Telescoping Poles: Yes, QTY 3
- Terrain Stabilizers Included: Yes, QTY 3
- BBQ Side Walls: Yes, and Reversible
(6 reviews) -
AwningsFREE SHIPPING
within 48 US StatesHD Nomadic Car-Side Shower Room
- Use this for a shower, use it for changing clothes, a quick change room, use it for a portable toilet enclosure, or whatever else you can think of!!
- Hide inside it and scare the crap out of your camping buddies when you’re out in the middle of nowhere!!
- Manufactured from a high performance 420D Oxford Rip Stop fabric and aluminum folding arms enclosed in rugged 1000D waterproof PVC integrated storage bag
- Mounts to roof rack with supplied L brackets and mounting stainless steel hardware
- This does NOT have a roof/ceiling, it is open at the top
- Quick and easy setup, simply unzip, fold out and stake down
- Curtain hems weighted with structural poles to keep shape – 42 Inch (L) X 42 Inch (W) X 76 Inch (H) with adjustable straps to accommodate various vehicle heights
- The front curtain wall features a heavy duty dual sided zip which allows easy access in and out of the Nomadic Car Side Shower
- Velcro strap to secure a shower head and two (2) internal pouches
- Download Instructions
(8 reviews) -
Sale!AwningsFREE SHIPPING
within 48 US StatesOverland Vehicle Systems Nomadic 180° Awning – Dark Gray With Black Bag
Features:
- 88 Square Feet of Freestanding Covered Shelter
- 600D Poly Cotton Rip-Stop Cover
- Boxed Aluminum Rafters
- Pivoting Aluminum Adjustable Poles
- Tie Down Points for Securing Poles and Water Run Off
- 1000G PVC Travel Cover
- 10 Lb Zipper
- Ballistic Nylon Tie Downs With S Connects and Buckle
- Shock Cord With Retention
- Zippers To Secure Enclosed Shelter
- Heavy Duty Oversized Stakes
- Can mount to driver or passenger side of vehicle
What’s included:
- 180 Degree Awning With 4 Built-In Aluminum Rafters
- 3 Pivoting and Telescoping Aluminum Poles + 2 Telescoping Aluminum Poles
- 4 Sets of Shock Cord
- 4 Heavy Duty Stakes
- Travel Cover
- 3 Heavy Duty Mounting Brackets and Hardware
- Nylon Reinforced Tie Down Kit
- Opened: 240 x 78.5 Inch
- Closed: 88 x 7 x 6 Inch
- Download Instructions
(8 reviews) -
Air SolutionsFREE SHIPPING
within 48 US States4 Piece Adjustable Tire Deflator Kit – 10-30 PSI
- Adjustable Pre-Set From 10-30 PSI
- Easy Twist Adjustable Design
- Super Slim Design to fit into aftermarket wheels easier
- Compact and Precise
- Deflators will automatically Stop at the Preset PSI
- Includes Storage Bag
- Kit of 4, you can deflate 4 tires at the same time
(13 reviews) -
TJ Wrangler (1996-2006)FREE SHIPPING
within 48 US StatesKing 4WD Premium TJ Wrangler Soft Upper Door Windows Tinted
- Suits 1997-2006 Jeep Wrangler TJ 2-door soft top convertibles (and LJ Unlimited) with Factory Half Door and Soft Door Uppers
- Does not include any framework
- Includes left and right side windows
- Black Diamond Fabric with TINTED windows
- Black Diamond Fabric
- Specification: Two Layer 24oz Marine Grade – Waterproof
- Testing: CFFA, FMVSS & SAE Requirements
- Specification: UV Approved
- Testing: Accelerated Light Aging Test – 1000 Hours
- Window Glass
- Specification: 96g DOT Approved Pressed flexible vinyl, undistorted, won’t shrink or yellow
- Testing: CFFA, FMVSS & SAE Requirements
- Zippers
- Specification: Reinforced nylon self-correcting zippers
- Testing: 50,000 Cycle Test – No bind or drag
- Velcro
- Specification: Industrial Grade Fiber
- Testing: 150 kg (330 lbs.) per square inch
- Seams
- Specification: 135-gauge thread with heat sealed seams, 4-piece thread per inch
- Testing: CFFA, FMVSS & SAE Requirements
- Also available with Clear Windows (not tinted)
- We also sell a full soft top with replacement soft half door uppers as well, click for details
(7 reviews) -
Sale!RecoveryFREE SHIPPING
within 48 US StatesOVS Tow Strap 30,000 lb. 3″ x 30′ Gray With Black Ends & Storage Bag
Construction
- Manufactured out heavy duty synthetic fiber with a 30,000 lb. breaking strength
- 30 foot long 3 inch wide folded and double stitched end with a heavy-duty padded protective sleeve
- Loop size is 10 inch which is ideal for all types of rigging including soft shackles and D Rings
- Tightly woven 30 strands per inch reinforced synthetic fiber material for extra durability
- Soft and pliable material flexes easy with no stretch and is ideal for static recovery situations
- Included storage bag with mesh at the bottom that allows dirt and debris to escape
Functions
- Ideal for daisy chaining vehicles through tough obstacles or long pulls with inoperable vehicle
- Can be used as a winch extension when extra length is needed
- Clean all mud and sand off of all synthetic ropes and straps as soon as you get home. Sand granules have sharp edges that can cut into the fibers at the microscopic level reducing the safe load rating
(8 reviews) -
Sale!RecoveryFREE SHIPPING
within 48 US StatesOVS Combo Pack Soft Shackle 7/16″ 41,000 lb. and Recovery Ring 4.0″ 41,000 lb. Gray
- OVS Soft Shackle Combo Pack
- Contains Soft Shackle 7/16 inch 41,000 lb. With Loop and Abrasive Sleeve – 23 inch With Storage Bag
- And Recovery Ring 4.00 inch 41,000 lb. Gray With Storage Bag
- The ultimate must have for your Overland or Offroad Rig.
(8 reviews)
-
4Runner 5th Gen (2010-2024)
Dobinsons 4Runner IMS Suspension Kit for 2010-24 (1-3.5″)
- Suits Toyota 4Runner 5th Gen 4×4 from 2010 to 2024, with or without KDSS
- If you have a 2WD model, add 1″ to the listed lift heights of the front coils due to the lighter front weight of the vehicle
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Dobinsons have the largest selection of front and rear coils for 4Runners and in multiple colors
- Add up how much accessory weight you have on the front and then the rear, that’s your constant load
- Then choose the lift height from the coils that most closely matches the added weight
- Fully rebuildable and re-valvable shocks and struts
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Option to have the front struts preassembled prior to shipping to make installation easier at home
- Base Kit Includes 2 Front IMS Monotube Struts, 2 Rear IMS Monotube Shocks, and 4 Coil Springs – Select your preferences
- You can go from a standard suspension to full long travel with all the options listed here
- The more lift height you add, the more parts you need, so read the subsection headings below
- Suspension Installation Video
(23 reviews) -
Dobinsons
Dobinsons 0-3″ Extended Travel IMS Tacoma Coilovers | 2005-2023
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Looking for a quick and easy way to lift your Tacoma? This is your answer
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- Extended Travel – 567mm extended, 417mm compressed
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Click to see Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(18 reviews) -
Suspension
Dobinsons 3-Way Adjustable Tacoma MRA Lift Kit for 2005-23 4×4 (0-3.5″)
- 4×4 Access Cab models come with 1″ front lift from the factory. Lift heights listed are for Dual cab 4×4 models. Subtract 1″ for access cab models
- Long bed models require the next step up in leaf spring, or they will sit 1″ less high. L59-110-R lift only 1″ on long bed models
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Dobinsons MRA front struts are height adjustable by a fully threaded body
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- Extended Travel Fronts – 567mm extended, 417mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat up front
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes front vehicle-specific resi brackets, rear includes resi brackets that get mounted to the frame as shown in the photos
- Coilover adjuster wrench is included for the fronts
- Choose your desired suspension parts to build the kit best suited to your weight and desired lift height
- Multiple different leaf springs options to match up with the added weight you’ve put on your truck or not
- Base kit includes front coils, front struts, rear leaf springs, and rear shocks, then you choose all of the desired add-ons from there, as well as the selections of each under the submenus
- For installation instructions, click here
(11 reviews) -
Full Suspension Kits - 5th Gen 4Runner
Dobinsons 2-3.5″ Extended Travel Pre-Assembled IMS Coilovers for Toyota 4Runner 5th Gen
- Suits 2010-2024 Toyota 4Runner 5th Gen 4×4 Models
- Looking for a quick and easy way to lift your 4Runner? This is your answer
- A 4×2 model lifts 1″ extra with the 4×4 lift heights
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- Extended Travel – 575mm fully extended, 430mm compressed
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- To run these Extended Travel coilovers, new UCA’s need to be added for proper articulation and correct wheel alignment. A diff drop kit is also recommended to minimize CV binding at full droop
- Click to see Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(5 reviews)
Latest News
September 9, 2024
Product InfoWhat the hell is a Swag??
Surely by now you’ve been in the offroad, overland, camping, [...]
July 9, 2024
Product InfoNot all UCA’s are the Same
Since Exit Offroad offers several different brands and designs of [...]
May 24, 2024
Product InfoElevate Your Adventures with the RCI Aluminum Tacoma Roof Rack for the 2024 Model
Introducing the ultimate companion for your 2024 Tacoma Dual Cab [...]
Fast Delivery
USA, Hawaii, Alaska, Puerto Rico, Guam, Canada
Expert advice
Reach out if you need help, we are here to help you!
MULTIPLE PAY OPTIONS
We offer financing, Paypal, Cards, Venmo
gift purchase?
Your wife doesn't need to know!!