You may be interested in…

• 

  Dobinsons

  Dobinsons Add-A-Leaf Center Bolt Pin (Single) (10-75)

  • Used in place of original leaf bolt when adding a leaf
  • Fits L59-111-R-R3 &  L59-112-R-R5 ONLY
  • Sold individually

  • Made from the highest quality raw materials to give years of life under the harshest conditions
  • Over 60 years of leaf spring design and manufacturing
  • Requires lifted leaf springs to ensure proper fitment

  $5.00 Add to cart
• 

  • 
  • 
  • 

  Front Bumpers

  WARN 101330 Elite Series Stubby Front Winch Bumper for JL & JT

  • Suits Jeep Wrangler JL 2018-2023 (all models) and Jeep Gladiator JT 2020-2023 (all models)
  • This is a winch bumper – it’s highly recommended to only buy it if you plan to put a winch in, otherwise it will look unfinished from up top since there is no cover panel if no winch is installed
  • Photos are shown with all added accessories.  This is for the base bumper only, no winch or under protection plates are included
  • Certified To Withstand An Industry-Leading 12,000 Pounds Of Pulling Force, Without Deformation
  • Durable Flat Black Power-Coated Finish With Five-Stage Pretreat Process And Zirconium Nanotechnology, Engineered To Withstand 408 Hours Of Salt Spray Testing
  • Winch Positioned To Deliver Maximum Airflow To The Engine Bay
  • Stubby Version Allows For Mounting Of Driving Lights Above The Bumper
  • Integrated Off-Road Jack Lifting Points And Shackle-Mounting Tabs
  • Limited 1 Year Warranty
  • Type: 1-Piece
  • Tubular: No
  • Air Bag Compatible: No
  • Finish: Powder Coated
  • Color: Black
  • Material: Steel
  • Drilling Required: No
  • Hitch Type: Without Receiver
  • Maximum Gross Trailer Weight: Without Receiver
  • Maximum Tongue Weight: Without Receiver
  • With Grille Guard: No
  • With Grille Screen: No
  • With Bull Bar: Yes
  • With Winch Mount: Yes
  • Winch Compatible: Yes
  • Tow Hooks: With Tow Hook Mounts
  • D-Rings: With D-Rings
  • With Light Cutouts: No
  • Light Type: No Lights
  • With Mounting Hardware: Yes
  • With Skid Plate: No
  • With Spare Tire Mount: No
  • With License Plate Mount: Yes
  • With Jacking Points: No
  • With CB Antenna Mount: No
  • Estimated Install Time (Hours): 2
  • Installation Instructions
  • Optional Front Skid Plate Can Be Added

  $999.99 Add to cart
• 

  • 
  • 

  Dobinsons

  Dobinsons WA59-522K Adjustable Rear Upper Trailing Arms Pair | 4Runner FJ Cruiser GX470 GX460

  • Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), Lexus GX470 and GX460
  • Fully adjustable now ON THE VEHICLE to properly set the length and pinion angle
  • Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
  • Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
  • Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
  • Zinc plated, then powder coated black, for the ultimate finish and protection
  • Instructions written down below in the description

  $345.00 Add to cart
• Sale!

  

  • 
  • 
  • 

  Sale

  Ships FREE !!
  within 48 US States

  Icon Tubular Lower Trailing Arm Kit | 4Runner FJ Cruiser GX470 GX460 LC200

  • Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and Lexus GX460, Lexus LX570 and 200 Series 2008-2021
  • CNC machined & notched 1026 DOM steel construction
  • Multi durometer bushing for noise free operation and maximum angularity
  • No grease required for life of bushings
  • Quality JM16T PTFE-lined FK Rod Ends
  • Adjustable for various lift heights & driveline angles
  • Offset lower link front pivots improve roll steer
  • Tangent lower link barrel design reduces risk of off-road hangups
  • Integrated OEM emergency brake bracket mount
  • ICON1K tested in extreme off-road conditions
  • Fabricated components covered under ICON’s lifetime warranty
  • Sold as a Pair
  • Installation Guide
  • Warranty Info

  $577.45 Original price was: $577.45.$549.95Current price is: $549.95. Add to cart
• 

  • 
  • 
  • 

  MRA Remote Resi 3-Way Adjustable Monotube

  Ships FREE !!
  within 48 US States

  Dobinsons MRA59-A701 3-Way Adjustable MRA Shocks

  • Suits 2003-2024 4Runner (4th and 5th Gen), All FJ Cruisers, Lexus GX470 and GX460, Toyota Prado 120 & 150, suitable for 0 – 3″ of lift
  • 3-way adjustable valving – adjust high and low speed compression and rebound
  • Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 50mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Direct Bolt-On Shock Design
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period
  • 609mm extended, 389mm compressed
  • SOLD IN PAIRS
  • Now comes with a longer hose and different mounting instructions

  $1,150.00 Add to cart
• 

  Warn

  Ships FREE !!
  within 48 US States

  WARN 101445 Optional Skid Plate for Elite Bumpers JL & JT

  • Suits Jeep Wrangler JL 2018-2023 (all models) and Jeep Gladiator JT 2020-2023 (all models) WITH a Warn Elite Bumper
  • Lower Bumper Skid Cover Protects Critical Components Such As Sway bar Disconnects
  • Meets The Highest Quality Standards
  • Built To Match Your Exact Requirements
  • Easy To Install
  • Limited 1 Year Warranty

  Attributes

  • Location: Under Bumper Mount
  • Finish: Powder Coated
  • Color: Black
  • Material: Steel
  • Logo: Warn Logo
  • Installation Type: Bolt-On
  • Includes Hardware: Yes
  • Drilling Required: No
  • Estimated Install Time (Hours): 0.5

  $265.00 Add to cart
• 

  • 
  • 
  • 

  Suspension

  Dobinsons GS59-088 Front Shocks for Toyota 4Runner Pickup (1985 to 1995)

  • Suits Toyota 4Runner 1st and 2nd Gen, 1985 to 1995 models with torsion bar suspension, and Toyota Hilux/Pickup 1998 to 2004 models with IFS torsion bar suspension
  • Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
  • Superior Design, thicker walls, longer travel
  • Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
  • Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
  • Matched to compliment Dobinsons Complete Suspension Systems
  • 367mm extended, 237mm compressed

  $310.00 Add to cart
• 

  • 
  • 
  • 

  Bronco 2021-2024+

  Ships FREE !!
  within 48 US States

  Fox Performance Elite Series 2.5″ Front Coilover Reservoir Pair Adjustable – 4DR Ford Bronco – 883-06-195

  • Suits: Front – Ford Bronco (fullsize) 2021+ 4-Door Models
  • Lift Height: 2-3″ with Sasquatch package, 3-4″ without Sasquatch package
  • Requires Aftermarket UCA’s for coilover clearance and articulation
  • Body: 2.5″ Impact extruded and CNC machined 6061-T6 hard anodized aluminum body resists rust over time
  • Body Plating: Hard-anodized for a durable finish
  • Reservoir: 2.5″ Smooth bore and honed seamless alloy reservoir
  • Components: Black-anodized, CNC-machined 6061-T6 billet aluminum
  • Spring Application: specific, custom progressive springs
  • Shaft: 7/8″ hard chrome plated steel shafts
  • Valving: Application specific valving to maximize performance
  • Seals: Redundant sealing pack system main seal, wiper seal, scraper seal
  • Bearing: PTFE-lined, heat-treated, alloy steel spherical
  • Adjustments: Ride height preload ring
  • Adjuster Type: DSC – Dual Speed Compression
  • Extended: 23.720″
  • Compressed: 17.940″
  • Travel: 5.780″
  • Top Mount: OEM
  • Bottom Mount: Bar Pin
  • Includes Reservoir Mounts
  • Exploded View Diagram »
  • Installation Guide »

  $2,399.95 Add to cart
• 

  Tundra 3rd Gen (2022-2024)

  Dobinsons Adjustable Rear Lower Control Arms Pair for Tundra + Tacoma

  • Suits all 2022+ Toyota Tundra and 2024+ Toyota Tacoma
  • Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
  • Made from HSLA (High Strength Low Alloy) Steel
  • 40mm OD and 6mm wall thickness with support brace
  • Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
  • Zinc plated, then E-coated black, for the ultimate finish and protection
  • Sold as a pair

  $445.00 Add to cart
• 

  • 
  • 
  • 

  Suspension

  Ships FREE !!
  within 48 US States

  Dobinsons MRA59-A683 3-Way Adjustable MRA Front Shocks | 80 Series 0-3″ Lift

  • Suits Toyota Land Cruiser 80 Series 1990-97, suitable for 0-3″ of lift
  • 3-way adjustable valving – Adjust high and low speed compression and rebound
  • Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 60mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • SOLD IN PAIRS
  • Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
  • Installation Instructions of the MRA Shocks
  • 627mm extended, 385mm compressed
  • Full 2 year limited warranty, no set rebuild time period

  $1,350.00 Add to cart
• 

  • 
  • 
  • 

  Steering Upgrades

  Ships FREE !!
  within 48 US States

  Rusty’s Front Track Bar Mount Brace | JL Wrangler + JT Gladiator

  • Fits: 2018-Current Jeep JL Wrangler and 2020-Current Jeep JT Gladiator Models
  • This is a brace that supports the mount between the steering box and the track bar bracket
  • Constructed of 1/4-inch thick laser-cut steel
  • CNC formed for an exact fit
  • E-coated in black for durability and looks
  • Includes Grade 8 hardware
  • INSTALLATION INSTRUCTIONS
  • Built in Rainbow City, Alabama, USA

  $146.00 Select options
• 

  • 
  • 

  4Runner 5th Gen (2010-2024)

  Dobinsons GS59-701 Rear Shocks | Toyota 4Runner FJ Cruiser GX470 GX460

  • Suits Toyota 4Runner 2003-2024, Toyota FJ Cruiser models 2006 to 2016, Lexus GX470, Lexus GX460, and Toyota Prado 120 and Toyota Prado 150 with 0-3″ of lift
  • Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
  • Superior Design, thicker walls, longer travel
  • Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
  • Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
  • Matched to compliment Dobinsons Complete Suspension Systems
  • Dobinsons GS59-701 Specifications: 605mm extended, 362mm compressed, 54mm body size
  • Available in Yellow or Black

  $310.00 Select options
• 

  • 
  • 

  200 Series Land Cruiser (2008-2021)

  Ships FREE !!
  within 48 US States

  Dobinsons Adjustable Rear Lower Control Arms Pair | LC200 LC300 Sequoia 23+

  • Suits all 200 Series Land Cruisers from 2008-2021, 300 Series Land Cruiser, and 2023+ Toyota Sequoia
  • Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
  • Made from HSLA (High Strength Low Alloy) Steel
  • 40mm OD and 6mm wall thickness with support brace
  • Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
  • Zinc plated, then E-coated black, for the ultimate finish and protection
  • Sold as a pair

  $445.00 Add to cart
• 

  • 
  • 

  Suspension

  Dobinsons GS59-705 Rear Shocks | FJ Cruiser 4Runner GX470 GX460

  • Suits Toyota 4Runner 2003-2024 and Toyota FJ Cruiser, Lexus Gx470 and GX460 models 2006 to 2023, with 0-2.5″ of lift
  • Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
  • Superior Design, thicker walls, longer travel
  • Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
  • Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
  • Matched to compliment Dobinsons Complete Suspension Systems
  • Dobinsons GS59-705 Specifications: 590mm extended, 355mm compressed, 50mm body size
  • Made in Yellow and Black

  $310.00 Select options
• 

  • 
  • 
  • 

  Exceptions

  Ships FREE !!
  within 48 US States

  Back in Stock Now!!

  Dobinsons IMS59-50220 Front IMS Struts | 05-23 Tacoma GX470 03-09 4Runner 06-09 FJ Cruiser

  • Fully rebuildable and re-valvable
  • Extended Travel – 567mm extended, 417mm compressed
  • SOLD IN PAIRS
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
  • Full 2 year limited warranty, no set rebuild time period
  • Instructions for setting coil seat height

  $650.00 Add to cart
• 

  • 
  • 
  • 

  4Runner 3rd Gen (1996-2002)

  Ships FREE !!
  within 48 US States

  Dobinsons IMS59-50225 Rear IMS Shocks for Toyota 4Runner 1990-02

  • Fully rebuildable and re-valvable
  • SOLD IN PAIRS
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
  • 530mm extended, 344mm compressed lengths
  • Full 2 year limited warranty, no set rebuild time period

  $580.00 Add to cart
• 

  • 
  • 
  • 

  Exceptions

  Ships FREE !!
  within 48 US States

  Back in Stock Now!!

  Dobinsons IMS59-50701 IMS Shocks | Toyota and Lexus (0-3″ lift)

  • Suits 2003-2024 4Runner (4th and 5th Gen), All FJ Cruisers, Lexus GX470 and GX460, Toyota Prado 120 & 150, suitable for 0 – 3″ of lift
  • Fully rebuildable and re-valvable
  • SOLD IN PAIRS
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
  • Full 2 year limited warranty, no set rebuild time period
  • Watch the video on IMS here: https://youtu.be/Npfx40VD3kM
  • Specifications: 598mm extended, 389mm compressed

  $580.00 Add to cart
• 

  • 
  • 
  • 

  Steering Upgrades

  Ships FREE !!
  within 48 US States

  Rusty’s HD Aluminum Tie Rod Assembly | JL Wrangler + JT Gladiator

  • Fits: 2018-Current Jeep JL Wrangler and 2020-Current Jeep JT Gladiator Models
  • A tie rod is the steering component that connects one wheel to the other, and you adjust toe with this
  • Massive 1.825″ 7075 SOLID Aluminum Tie Rod
  • Adjustable forged ends are threaded for adjustment without removing the tie rod from the vehicle
  • HD jam nuts
  • Serrated Lock Washers
  • The strongest JL/JT Tie Rod you can buy
  • Complete assembly from one side to the other, nothing else needed
  • INSTALLATION INSTRUCTIONS
  • Built in Rainbow City, Alabama, USA
  • Also made in a steel DOM version

  $502.00 Select options
• 

  • 
  • 
  • 

  Steering Upgrades

  Ships FREE !!
  within 48 US States

  Rusty’s HD Tie Rod Assembly | JL Wrangler + JT Gladiator

  • Fits: 2018-Current Jeep JL Wrangler and 2020-Current Jeep JT Gladiator Models
  • A tie rod is the steering component that connects one wheel to the other, and you adjust toe with this
  • Massive 1.75″ x 0.250-wall DOM tubing Tie Rod bar
  • Adjustable forged ends are threaded for adjustment without removing the tie rod from the vehicle
  • HD jam nuts
  • Serrated Lock Washers
  • The strongest JL/JT Tie Rod you can buy
  • Complete assembly from one side to the other, nothing else needed
  • INSTALLATION INSTRUCTIONS
  • Built in Rainbow City, Alabama, USA
  • Also made in an Aluminum version

  $427.00 Select options
• 

  Excluded

  Dobinsons Tacoma L59-110-R Leaf Springs Pair for 2005-2023 (0-220LB Load)

  • Suits 2005-2023 Toyota Tacoma.  Lifts dual cab short beds 2-2.25″ with 0-220LBS load, and 1″ on a Long Bed
  • Made from the highest quality raw materials to give years of life under the harshest conditions
  • Over 60 years of leaf spring design and manufacturing
  • Design features include Drawn, tapered and thinned leaf ends
  • Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
  • Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
  • Click here for Extra Leaf Kit for additional load support
  • These are leaf springs ONLY and don’t come with bushings or any other parts.  Scroll down for add-ons that go with these springs
  • Sold as a pair – they are not side-specific

  $590.00 Add to cart