Dobinsons Spring & Suspension

Showing 901–930 of 1057 resultsSorted by popularity

Full Suspension Kits - Xterra
FREE SHIPPING
within 48 US States
Dobinsons 1.5″ Lift MRA Coilovers 3-Way Adjustable – Nissan Xterra 2005+
- Remote Resi Coilovers Suit Nissan Xterra 4×4 Models (2005-2015) – lifts 1.5″
- Looking for a quick and easy way to lift your Xterra? This is your answer
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Length specs – 395mm extended, 266mm compressed
- Photos for illustration purposes
- FITTING INSTRUCTIONS
- Instructions for setting coil seat height
- Link to the matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
Rated 5.00 out of 5
(2 reviews)
From $1,820.00 Select options
Full Suspension Kits - Frontier D41
FREE SHIPPING
within 48 US States
Dobinsons MRA Extended Travel Coilovers 3-Way Adjustable | Frontier D41 2022+
- Extended Travel Coilovers Suit Nissan Frontier D41 4×4 Models 2022-2023+ – lifts 2-3″ depending on selections made below
- These extended travel struts REQUIRE aftermarket UCA’s for full travel, like Dobinsons
- Looking for a quick and easy way to lift your Frontier? This is your answer
- Dobinsons MRA are height adjustable by a fully threaded body
- The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Length specs – 278mm compressed and 410mm extended
- Photos for illustration purposes
- FITTING INSTRUCTIONS
- Instructions for setting coil seat height
- Link to the matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
Rated 5.00 out of 5
(6 reviews)
From $1,820.00 Select options
Jimny (2018+)
FREE SHIPPING
within 48 US States
Dobinsons Suzuki Jimny IMS Suspension Kit | 2018+
- Suits 2018-2023 Suzuki Jimny GJ – 40mm lift front and rear
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Fully rebuildable and re-valvable shocks
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front IMS Monotube Shocks, 2 Rear IMS Monotube Shocks, and 4 Coil Springs – Select your preferences
Rated 5.00 out of 5
(8 reviews)
From $2,070.00 Select options
Dobinsons
FREE SHIPPING
within 48 US States
Dobinsons ±2 ½ – 3° Caster Bushing Kit for Suzuki Jimny
- Suits Suzuki Jimny 1998-2017 and 2018+
- High quality rubber, producing the highest ride quality
- Adjustable during installation to offer ±2 ½ – 3° of caster adjustment
- Replaces OE bushes holding front and radius arms to the axle
- Order 2 for 1 vehicle to change it all
- Raising Vehicle Will Effect Wheel Alignment. It is Recommended that this Castor Adjustment Kit to be Fitted and a Wheel Alignment Carried Out.
- Installation Instructions
Rated 5.00 out of 5
(3 reviews)
$185.00 Add to cart
Jimny (2018+)
Dobinsons C57-143 Rear Coils | Jimny 2018+ 40mm Lift – Pair
- Suits Suzuki Jimny 2018+ 40mm Lift with stock rear end weight up to 60KG added
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
Rated 5.00 out of 5
(10 reviews)
$240.00 Add to cart
On Backorder
Jimny (2018+)
Dobinsons C57-071 Rear Coils | Jimny 2018+ 40mm Lift HD – Pair
- Suits Suzuki Jimny 2018+ 40mm Lift with 100-200KG of added rear end weight (bumper, rooftop tent, etc)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
Rated 5.00 out of 5
(12 reviews)
$270.00 Add to cart
Jimny (2018+)
Dobinsons C57-110 Front Coils | Jimny 2018+ 40mm Lift HD – Pair
- Suits Suzuki Jimny 2018+ 40mm Lift with 40-70KG of added front end weight (bumper, winch, etc)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
Rated 5.00 out of 5
(13 reviews)
$240.00 Add to cart
Jimny (2018+)
Dobinsons C57-142 Front Coils | Jimny 2018+ 40mm Lift – Pair
- Suits Suzuki Jimny 2018+ 40mm Lift with stock weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
Rated 5.00 out of 5
(12 reviews)
$240.00 Add to cart
Dobinsons
FREE SHIPPING
within 48 US States
Dobinsons IMS57-50618 2.2″ IMS Shocks Pair | Suzuki Jimny Rear Shocks
- Suits Suzuki Jimny 1998-2017 and 2018+
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(8 reviews)
$580.00 Add to cart
Dobinsons
FREE SHIPPING
within 48 US States
Dobinsons IMS57-50617 2.2″ IMS Shocks Pair | Suzuki Jimny Front Shocks
- Suits Suzuki Jimny 1998-2017 and 2018+
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(8 reviews)
$580.00 Add to cart
Full Suspension Kits - Bronco 2021+
FREE SHIPPING
within 48 US States
Dobinsons IMS Ford Bronco Suspension Kit 2 DOOR
- Suits 2 DOOR Ford Bronco 2021-2023 Models (will not fit Bronco Sport)
- Complete suspension kit with multiple coil spring options to suit the vehicle as well as the added weight
- (The 4 Door Suspension Kit is on a different page)
- Note: Photo is not of actual IMS struts. Ford Bronco IMS have a crossbar style lower front shock bush
- Front Springs Provide Approximately 3″-4″ Lift Above Non Sasquatch Models & 2″-3″ Lift Above Sasquatch Models.
- Rear Springs Provide Approximately 3″ Lift Above Non Sasquatch Models & 2″ Lift Above Sasquatch Models.
- Dobinsons IMS shocks and struts are fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height should be set to 243mm (9.55″) front and rear. See instructions on setting coil seat height on left
- Reuse OE strut top mounts
- Select the coil springs that match the Bronco version you have as well as the added weight you have put on it, if any
Rated 5.00 out of 5
(8 reviews)
From $1,300.00 Select options
Bronco (2021-2025+)
Dobinsons Ford Bronco Rear Coils | C19-563V – Pair
- Dobinsons C19-563V Variable Rate Springs Suits Ford Bronco:
  
  2 Door – BL, Wildtrack, First Edition – with 0-110lbs load
  
  4 Door – Base, Big Bend, Black Diamond, Outer Banks – with 0-110lbs load
- Coil Springs Can Only Be Fitted To Dobinsons IMS19-50099
- Coils Provide Approximately 3″-4″ Lift Above Non Sasquatch Models & 2″-3″ Lift Above Sasquatch Models
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Choose what color you would like
- Made in Australia
- Sold in Pairs
Rated 5.00 out of 5
(15 reviews)
$270.00
Coil Color Clear

Dobinsons Ford Bronco Rear Coils | C19-563V - Pair quantity
Select options This product has multiple variants. The options may be chosen on the product page
Bronco (2021-2025+)
Dobinsons Ford Bronco Rear Coils | C19-561V – Pair
- Dobinsons C19-561V Variable Rate Springs Suits Ford Bronco:
  
  2 Door – Base, Big Bend, Black Diamond, Outer Banks – with 0-110lbs load
- Coil Springs Can Only Be Fitted To Dobinsons IMS19-50099
- Coils Provide Approximately 3″-4″ Lift Above Non Sasquatch Models & 2″-3″ Lift Above Sasquatch Models
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Choose what color you would like
- Made in Australia
- Sold in Pairs
Rated 5.00 out of 5
(19 reviews)
$270.00
Coil Color Clear

Dobinsons Ford Bronco Rear Coils | C19-561V - Pair quantity
Select options This product has multiple variants. The options may be chosen on the product page
Bronco (2021-2025+)
Dobinsons Ford Bronco Front Coils | C19-560 – Pair
- C19-560 Suits Ford Bronco: 2 Door – Base, Big Bend, Black Diamond, Outer Banks WITH 2.3L – Stock Load
- Coil Springs Can Only Be Fitted To Dobinsons IMS19-50098
- Coils Provide Approximately 3″-4″ Lift Above Non Sasquatch Models & 2″-3″ Lift Above Sasquatch Models
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Choose what color you would like
- Made in Australia
- Sold in Pairs
Rated 5.00 out of 5
(14 reviews)
$270.00
Coil Color Clear

Dobinsons Ford Bronco Front Coils | C19-560 - Pair quantity
Select options This product has multiple variants. The options may be chosen on the product page
45 Series Land Cruiser - FJ45, HJ45 (pre 8/1980)
Dobinsons HJ45-8L-F Front Leaf Springs Pair for FJ/BJ45 up to 1979
- Front Leaf Springs for the Toyota FJ/BJ45 up to 1979 with 25mm eyes
- 45mm front lift with 110-180LBS front end weight on an FJ45/BJ45
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, leaf springs only
Rated 5.00 out of 5
(2 reviews)
$470.00 Add to cart
Struts + Shocks - FJ Cruiser Early
FREE SHIPPING
within 48 US States
Dobinsons GS Shock Kit for FJ Cruisers 2006-2009
- Dobinsons GS Twin Tube Strut and Shock Absorber Kit – Front and Rear
- Suits 2006-2009 Toyota FJ Cruiser
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Strut and Shock specs are down below
- Reservoir: No
- Finish: Painted
- Body Design: 51mm OD
- Rod: Double Chrome 18mm
- Oil: High Quality Fuch’s Oil from Germany
- Seals: Japanese NOK Multi-Lip
- Rings: Teflon Piston Rings
- Bushings: Natural Rubber
- Internal Design: Twin tube
- Boot Included: Yes
- Bushings Included: Yes, top and bottom, front and rear
- Reuse original coil spring or buy new Dobinsons springs
- Offered in Yellow or Black, choose below
Rated 5.00 out of 5
(13 reviews)
From $660.00 Select options
Shocks + Struts - 4th Gen 4Runner
FREE SHIPPING
within 48 US States
Dobinsons GS Shock Kit for 4th Gen 4Runners 2003-2009
- Dobinsons GS Twin Tube Strut and Shock Absorber Kit – Front and Rear
- Suits 2003-2009 Toyota 4Runner 4th Gen
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Strut and Shock specs are down below
- Reservoir: No
- Finish: Painted
- Body Design: 51mm OD
- Rod: Double Chrome 18mm
- Oil: High Quality Fuch’s Oil from Germany
- Seals: Japanese NOK Multi-Lip
- Rings: Teflon Piston Rings
- Bushings: Natural Rubber
- Internal Design: Twin tube
- Boot Included: Yes
- Bushings Included: Yes, top and bottom, front and rear
- Reuse original coil spring or buy new Dobinsons springs
- Offered in Yellow or Black, choose below
Rated 5.00 out of 5
(11 reviews)
From $660.00 Select options
Struts + Shocks - FJ Cruiser Late
FREE SHIPPING
within 48 US States
Dobinsons GS Shock Kit for FJ Cruiser 2010+
- Dobinsons GS Twin Tube Strut and Shock Absorber Kit – Front and Rear
- Suits 2010-2016 Toyota FJ Cruiser
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Strut and Shock specs are down below
- Reservoir: No
- Finish: Painted
- Body Design: 51mm OD
- Rod: Double Chrome 18mm
- Oil: High Quality Fuch’s Oil from Germany
- Seals: Japanese NOK Multi-Lip
- Rings: Teflon Piston Rings
- Bushings: Natural Rubber
- Internal Design: Twin tube
- Boot Included: Yes
- Bushings Included: Yes, top and bottom, front and rear
- Reuse original coil spring or buy new Dobinsons springs
Rated 5.00 out of 5
(12 reviews)
From $660.00 Select options
On Backorder
Upper Control Arms
FREE SHIPPING
within 48 US States
ETA is Spring 2025
Dobinsons Billet Aluminum UCA’s Pair | 22-25 Tundra, 23-25 Sequoia
- Super strong billet aluminum front upper control arms (UCA’s)
- Suits 2022-2025+ Toyota Tundra, 2023-2025+ Toyota Sequoia
- Complete kit for both left and right hand side
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- *Must reuse OEM Washers
- Installation Instructions
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
- Photos for illustration purposes
(0 reviews)
$1,195.00 Add to cart
Sequoia 1st Gen (2001-2007)
FREE SHIPPING
within 48 US States
Dobinsons 3-Way Adjustable MRA 0-2.5″ Sequoia Lift Kit | 2001-2007
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Universal Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- The included droop spacer goes on top of the strut, under the first washer, if lifting more than 2.0″ (see attached photo)
- Additional optional parts can be added from the drop down menus
Rated 5.00 out of 5
(6 reviews)
From $3,170.00 Select options
Late FJ Cruiser (2010-2016)
FREE SHIPPING
within 48 US States
Dobinsons 2-3.5″ Extended Travel Pre-Assembled IMS Coilovers for FJ Cruiser 2010+
- Suits 2010-2017 Toyota FJ Cruiser 4×4 Models
- Looking for a quick and easy way to lift your FJ Cruiser? This is your answer
- A 4×2 model lifts 1″ extra with the 4×4 lift heights
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- Extended Travel – 575mm fully extended, 430mm compressed
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- To run these Extended Travel coilovers, new UCA’s need to be added for proper articulation and correct wheel alignment. A diff drop kit is also recommended to minimize CV binding at full droop
- Click to see Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
Rated 5.00 out of 5
(5 reviews)
$1,199.00 Select options
Late FJ Cruiser (2010-2016)
FREE SHIPPING
within 48 US States
Dobinsons 1.5-2.5″ Pre-Assembled IMS Coilovers for FJ Cruiser 2010+
- Suits 2010-2017 Toyota FJ Cruiser 4×4 Models
- Looking for a quick and easy way to lift your FJ Cruiser? This is your answer
- A 4×2 model lifts 1″ extra with the 4×4 lift heights
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- 560mm extended, 420mm compressed
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Click to see Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
Rated 5.00 out of 5
(5 reviews)
$1,199.00 Select options
Bronco (2021-2025+)
FREE SHIPPING
within 48 US States
Dobinsons Rear Adjustable Panhard Rod for Ford Bronco 2021+
- Suits Ford Bronco 2021-2023+ (not sport models)
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Zinc plated steel then E-coated with all hardware and high quality rubber bushes supplied
- Off-car adjustable, cannot be set while fully installed
- For 0-4″ of lift
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
- Photo for illustration purposes
Rated 5.00 out of 5
(3 reviews)
$330.00 Add to cart
Pathfinder R51 (2005-2012)
FREE SHIPPING
within 48 US States
Dobinsons 1.5″ Lift IMS Coilovers for Nissan Pathfinder R51
- Suits 2005-2012 Nissan Pathfinder R51 4×4 Models – Lifts 1.5″ over stock
- Looking for a quick and easy way to lift your Pathfinder? This is your answer
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
Rated 5.00 out of 5
(6 reviews)
From $1,190.00 Select options
On Backorder
Bronco (2021-2025+)
FREE SHIPPING
within 48 US States
Dobinsons Billet Aluminum Ford Bronco UCA Pair | Bronco 2021+
- Suits Ford Bronco 2021+ (full size Bronco)
- Super strong billet aluminum front upper control arms (UCA’s)
- Complete kit for both left and right hand side
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- Photos for illustration purposes
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
(0 reviews)
$1,195.00 Add to cart
Sequoia 3rd Gen (2023-2025+)
Dobinsons Front Coil Spring Options | Toyota Sequoia 2023+ – Pair
- Suits Toyota Sequoia 2023-2025+, choose the appropriate lift height that also matches any added weight you’ve put on the truck
- A 2023+ Sequoia came with a front ride height 1″ lower than a 2022+ Tundra, so we’re able to offer a 4″ lift on these, which is a 3″ on a Tundra, and still within the limits of the IFS
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
Rated 5.00 out of 5
(17 reviews)
From $305.00 Select options
200 Series Land Cruiser ARMORED
Dobinsons C59-564 B7 800-900KG Armored Land Cruiser 200 Series Front Coils – Pair
- C59-564 – Front Coils for Level B7 Armor with 800-900KG of additional weight over stock – 200 Series Land Cruiser
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish.
- Sold as a Pair – marked side specific for installation
Rated 5.00 out of 5
(4 reviews)
$405.00 Add to cart
200 Series Land Cruiser ARMORED
Dobinsons C59-562 B6 500KG Armored Land Cruiser 200 Series Front Coils – Pair
- C59-562 – Front Coils for Level B6 Armor with 500KG of additional weight over stock – 200 Series Land Cruiser
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish.
- Sold as a Pair – marked side specific for installation
Rated 5.00 out of 5
(4 reviews)
$305.00 Add to cart
Sequoia 3rd Gen (2023-2025+)
FREE SHIPPING
within 48 US States
Dobinsons GS59-441 Pair of Rear Shocks | Sequoia & LC300
- Suits 2023-2025+ Toyota Sequoia with 2-3″ of lift using Dobinsons Coils
- Also suits 2022-2025+ Toyota Land Cruiser 300 Series
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Sold in Pairs
Rated 5.00 out of 5
(8 reviews)
$310.00 Add to cart
200 Series Land Cruiser ARMORED
Dobinsons C59-565 B7 900-1100KG Armored Land Cruiser 200 Series Rear Coils – Pair
- C59-565 – Level B7 Armor with 900-1100KG of additional weight over stock – 200 Series Land Cruiser
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish.
- Sold as a Pair – marked side specific for installation
Rated 5.00 out of 5
(4 reviews)
$405.00 Add to cart