Bumpers + Sliders - JL Wrangler

Showing all 16 results

On Backorder
Rusty's Off Road
Ships FREE !!
within 48 US States
Rusty’s JL Side Step Rocker Armor | JL Wrangler 4-DR 2024+
- Fits: 2024+ Jeep JL Wrangler 4-Door Models (will not fit 2023 and older or 2-Doors)
- Earlier 2018-2023 models use these instead
- Constructed of 2″ x 0.188-wall DOM tubing
- Fully welded for exceptional strength
- Built-in side step for easy entry as well as enhancing body protection
- Bolts to the frame at the chassis mounts
- Durable Satin Black powder coated finish
- Installation Instructions
- Removal of factory side steps or rails is required
- Built in Rainbow City, Alabama, USA
- Photos are of actual product. Side step is flat, not angled upward
$1,327.00 Add to cart
On Backorder
Rusty's Off Road
Ships FREE !!
within 48 US States
Rusty’s JL Side Step Rocker Armor | JL Wrangler 4-DR 2018-2023
- Fits: 2018-2023 Jeep JL Wrangler 4-Door Models (will not fit 2024’s or 2-Doors)
- Constructed of 2″ x 0.188-wall DOM tubing
- Fully welded for exceptional strength
- Built-in side step for easy entry as well as enhancing body protection
- Bolts to the frame at the chassis mounts
- Durable Satin Black powder coated finish
- Installation Instructions
- Removal of factory side steps or rails is required
- Built in Rainbow City, Alabama, USA
- Photos are of actual product. Side step is flat, not angled upward
$1,327.00 Add to cart
Bumpers + Sliders - JL Wrangler
Ships FREE !!
within 48 US States
Rusty’s JL Tire Carrier | Jeep Wrangler JL 2018+
- Fits: 2018-2024+ Jeep Wrangler JL
- Made of 3/16-inch and 1/4-inch steel
- 1/2-inch hinge on “Oilite” oil embedded bronze bearings
- Has a Reinforcement Plate inside the body to strengthen the hinge mounting area
- 100% bolt-on installation
- Will carry up to a 42-inch tire
- One-hand operation
- Adjustable tire position works with most aftermarket bumpers and wheel offsets
- Three different lug patterns available
- E-coated and Powder Coated Satin Black
- Optional bolt-on Hi-Lift Jack Mount available
- Optional license plate relocation bracket option is below
- Optional R35 Recon Package steel Camera Enclosure Available
- Installation Instructions
- Built in Rainbow City, Alabama, USA
$895.00 Select options
Rusty's Off Road
Ships FREE !!
within 48 US States
Rusty’s JL Rocker Armor with Kicker Tube | JL Wrangler 4-DR 2024+
- Fits: 2024 Jeep JL Wrangler 4-Door Models (will not fit pre-2024’s or 2-Doors)
- Constructed of 2″ x 0.188-wall DOM tubing
- Fully welded for exceptional strength
- Built-in step for easing entry as well as enhancing body protection
- Bolts to the frame
- Durable Satin Black powder coated finish
- Installation Instructions
- Removal of factory side steps or rails is required
- Built in Rainbow City, Alabama, USA
$1,327.00 Add to cart
Rusty's Off Road
Ships FREE !!
within 48 US States
Rusty’s JL Rocker Armor with Kicker Tube | JL Wrangler 4-DR 2018-2023
- Fits: 2018-2023 Jeep JL Wrangler 4-Door Models (will not fit 2024’s or 2-Doors)
- Constructed of 2″ x 0.188-wall DOM tubing
- Fully welded for exceptional strength
- Built-in step for easing entry as well as enhancing body protection
- Bolts to the frame
- Durable Satin Black powder coated finish
- Installation Instructions
- Removal of factory side steps or rails is required
- Built in Rainbow City, Alabama, USA
$1,327.00 Add to cart
Rear Bumpers
Ships FREE !!
within 48 US States
Teraflex JL Alpha HD Hinged Spare Tire Carrier & Mount Kit
- Suits Jeep Wrangler JL 2018+ 2-door and 4-door
- Max Tire: 40”
- Wheel Pattern: 5×5”
- Innovative and unique design w/ easy adjustability
- Maintains single-handed entry to the rear cargo area
- Works w/ OEM and most aftermarket bumpers
- Simple installation using common hand tools
- No drilling required — uses factory mounting locations
- Dedicated CAD-designed tooling and CAE design
- FEA validation, ASTM, and SAE testing procedures
- 1,000-hour extreme salt spray testing
- OEM Quality UV resistant powder coat finish w/ 3,000-hour accelerated weather testing
- Alpha HD Hinged Spare Tire Carrier Kit:
- Eliminates tailgate stress and rattles
- Factory form fitting geometry and finish for an OEM appearance
- Threaded mounting holes for mounting accessories such as Hi-Lift and CB antennae brackets
- Hinged Carrier constructed from strong and lightweight A356.2 aluminum
- Heavy-duty forged steel brackets and mid-carbon hardened steel 5/8” hinge pins
- 14,000-cycle severe duty slam testing Alpha HD Adjustable Spare Tire Mount Kit:
- Easy fore/aft and height adjustments
- Relocates 3rd brake light from behind tailgate to behind spare tire
- Includes new quick-release 3rd Brake Light Mount
- Includes new hard-anodized billet aluminum Rearview Camera Mount
- Spare Tire Mount is formed and welded from CNC laser cut steel for superior strength
- Adjuster made from strong and lightweight 6061-T6 extruded aluminum
$1,293.99 Add to cart
Front Bumpers
WARN 102146 Full Width Crawler Front Winch Bumper for JK JL & JT
- Suits Jeep Wrangler JK 2007-2017, Jeep Wrangler JL 2018-2023 (all models) and Jeep Gladiator JT 2020-2023 (all models)
- Photos are shown with all added accessories. This is for the base bumper only, no winch or under protection plates are included
- Certified To Withstand An Industry-Leading 12,000 Pounds Of Pulling Force, Without Deformation
- Durable Flat Black Power-Coated Finish With Five-Stage Pretreat Process And Zirconium Nanotechnology, Engineered To Withstand 408 Hours Of Salt Spray Testing
- Winch Positioned On Top Of Bumper For Easy Mounting And Access
- Standard Rock Crawler Front Bumper Features Pre-Drilled Holes For Auxiliary Lights
- Features Recessed Jack Points For Increased Recovery Options
- Has Recessed Ports And Mounts For Factory Or Auxiliary Lights
- Optional skid plate for further front-end protection, 101445
- Limited 1 Year Warranty
- Type: 1-Piece
- Tubular: No
- Air Bag Compatible: No
- Finish: Powder Coated
- Color: Black
- Material: Steel
- Drilling Required: No
- Hitch Type: Without Receiver
- Maximum Gross Trailer Weight: Without Receiver
- Maximum Tongue Weight: Without Receiver
- With Grille Guard: Yes
- With Grille Screen: No
- With Bull Bar: Yes
- With Winch Mount: Yes
- Winch Compatible: Yes
- Tow Hooks: With Tow Hook Mounts
- D-Rings: With D-Ring Mounts
- With Light Cutouts: Yes
- Light Type: Lights – Sold Separately
- With Mounting Hardware: Yes
- With Skid Plate: No, optional
- With Spare Tire Mount: No
- With License Plate Mount: Yes
- With Jacking Points: Yes
- With CB Antenna Mount: No
- Estimated Install Time (Hours): 2
- Installation Instructions
- Optional Front Skid Plate Can Be Added
$805.00 Add to cart
Front Bumpers
WARN 102145 Full Width Crawler Front Winch Bumper for JK JL & JT
- Suits Jeep Wrangler JK 2007-2017, Jeep Wrangler JL 2018-2023 (all models) and Jeep Gladiator JT 2020-2023 (all models)
- Photos are shown with all added accessories. This is for the base bumper only, no winch or under protection plates are included
- Certified To Withstand An Industry-Leading 12,000 Pounds Of Pulling Force, Without Deformation
- Durable Flat Black Power-Coated Finish With Five-Stage Pretreat Process And Zirconium Nanotechnology, Engineered To Withstand 408 Hours Of Salt Spray Testing
- Winch Positioned On Top Of Bumper For Easy Mounting And Access
- Standard Rock Crawler Front Bumper Features Pre-Drilled Holes For Auxiliary Lights
- Features Recessed Jack Points For Increased Recovery Options
- Has Recessed Ports And Mounts For Factory Or Auxiliary Lights
- Optional skid plate for further front-end protection, 101445
- Limited 1 Year Warranty
- Type: 1-Piece
- Tubular: No
- Air Bag Compatible: No
- Finish: Powder Coated
- Color: Black
- Material: Steel
- Drilling Required: No
- Hitch Type: Without Receiver
- Maximum Gross Trailer Weight: Without Receiver
- Maximum Tongue Weight: Without Receiver
- With Grille Guard: No
- With Grille Screen: No
- With Bull Bar: No
- With Winch Mount: Yes
- Winch Compatible: Yes
- Tow Hooks: With Tow Hook Mounts
- D-Rings: With D-Ring Mounts
- With Light Cutouts: Yes
- Light Type: Lights – Sold Separately
- With Mounting Hardware: Yes
- With Skid Plate: No, optional
- With Spare Tire Mount: No
- With License Plate Mount: Yes
- With Jacking Points: Yes
- With CB Antenna Mount: No
- Estimated Install Time (Hours): 2
- Installation Instructions
- Optional Front Skid Plate Can Be Added
$705.00 Add to cart
Front Bumpers
WARN 102510 Stubby Crawler Front Winch Bumper for JK JL & JT
- Suits Jeep Wrangler JK 2007-2017, Jeep Wrangler JL 2018-2023 (all models) and Jeep Gladiator JT 2020-2023 (all models)
- Photos are shown with all added accessories. This is for the base bumper only, no winch or under protection plates are included
- Certified To Withstand An Industry-Leading 12,000 Pounds Of Pulling Force, Without Deformation
- Durable Flat Black Power-Coated Finish With Five-Stage Pretreat Process And Zirconium Nanotechnology, Engineered To Withstand 408 Hours Of Salt Spray Testing
- Winch Positioned On Top Of Bumper For Easy Mounting And Access
- Standard Rock Crawler Front Bumper Features Pre-Drilled Holes For Auxiliary Lights
- Features Recessed Jack Points For Increased Recovery Options
- Has Recessed Ports And Mounts For Factory Or Auxiliary Lights
- Optional skid plate for further front-end protection, 101445
- Limited 1 Year Warranty
- Type: 1-Piece
- Tubular: No
- Air Bag Compatible: No
- Finish: Powder Coated
- Color: Black
- Material: Steel
- Drilling Required: No
- Hitch Type: Without Receiver
- Maximum Gross Trailer Weight: Without Receiver
- Maximum Tongue Weight: Without Receiver
- With Grille Guard: No
- With Grille Screen: No
- With Bull Bar: No
- With Winch Mount: Yes
- Winch Compatible: Yes
- Tow Hooks: With Tow Hook Mounts
- D-Rings: With D-Ring Mounts
- With Light Cutouts: Yes
- Light Type: Lights – Sold Separately
- With Mounting Hardware: Yes
- With Skid Plate: No, optional
- With Spare Tire Mount: No
- With License Plate Mount: Yes
- With Jacking Points: Yes
- With CB Antenna Mount: No
- Estimated Install Time (Hours): 2
- Installation Instructions
- Optional Front Skid Plate Can Be Added
$605.00 Add to cart
Front Bumpers
WARN 101325 Elite Series Stubby Front Winch Bumper for JL & JT
- Suits Jeep Wrangler JL 2018-2023 (all models) and Jeep Gladiator JT 2020-2023 (all models)
- This is a winch bumper – it’s highly recommended to only buy it if you plan to put a winch in, otherwise it will look unfinished from up top since there is no cover panel if no winch is installed
- Photos are shown with all added accessories. This is for the base bumper only, no winch or under protection plates are included
- Certified To Withstand An Industry-Leading 12,000 Pounds Of Pulling Force, Without Deformation
- Durable Flat Black Power-Coated Finish With Five-Stage Pretreat Process And Zirconium Nanotechnology, Engineered To Withstand 408 Hours Of Salt Spray Testing
- Winch Positioned To Deliver Maximum Airflow To The Engine Bay
- Stubby Version Allows For Mounting Of Driving Lights Above The Bumper
- Integrated Off-Road Jack Lifting Points And Shackle-Mounting Tabs
- Limited 1 Year Warranty
- Type: 1-Piece
- Tubular: No
- Air Bag Compatible: No
- Finish: Powder Coated
- Color: Black
- Material: Steel
- Drilling Required: No
- Hitch Type: Without Receiver
- Maximum Gross Trailer Weight: Without Receiver
- Maximum Tongue Weight: Without Receiver
- With Grille Guard: No
- With Grille Screen: No
- With Bull Bar: No
- With Winch Mount: Yes
- Winch Compatible: Yes
- Tow Hooks: With Tow Hook Mounts
- D-Rings: With D-Rings
- With Light Cutouts: No
- Light Type: No Lights
- With Mounting Hardware: Yes
- With Skid Plate: No
- With Spare Tire Mount: No
- With License Plate Mount: Yes
- With Jacking Points: No
- With CB Antenna Mount: No
- Estimated Install Time (Hours): 2
- Installation Instructions
- Optional Front Skid Plate Can Be Added
$899.99 Add to cart
Warn
Ships FREE !!
within 48 US States
Warn 101255 Winch Mount for 2018+ Jeep JL & JT
- Suits Jeep Wrangler JL and Jeep Gladiator JT with OEM Rubicon Steel Front Bumper
- This does not come with the bumper cover, lights, or winch as shown in photos for illustration purposes
- Strictly engineered and certified to withstand 12,000 lb pulls
- Positions winch to improve airflow with zero interference with the grille
- Easy to install with no cutting, grinding, or drilling
- Limited 1 Year Warranty
- Accommodates WARN ZEON, ZEON Platinum, VR, M8, XD9, and Mopar Rubicon winches
- Type: Fixed Mount
- Includes Winch: No
- Includes Winch Carrier: Yes
- Finish: Powder Coated
- Color: Black
- Material: Steel
- Includes Grille Guard: No
- Includes Brush Guard: No
- Includes Light Mounting Bar: No
- Includes Mounting Brackets: Yes
- Drilling Required: No
- Estimated Install Time (Hours): 1
- INSTALLATION INSTRUCTIONS
$399.99 Add to cart
Rear Bumpers
Ships FREE !!
within 48 US States
Warn 102255 Elite Series Rear Tire Carrier for JL Wrangler
- Suits Jeep Wrangler JL 2018-2023 (all models)
- Tire Carrier ONLY
- Requires the Elite Rear Bumper 102190 to run this tire carrier
- Holds Up To A True 40 Inch Tire
- JL Tire Carrier Add On To The Elite Rear Bumper For Jeep JL
- Built To Match Your Exact Requirements
- Easy To Install
- Limited 1 Year Warranty
- THIS IS A SPECIAL ORDER ITEM
- INSTALLATION INSTRUCTIONS
$1,479.99 Add to cart
Rear Bumpers
Warn 102190 Elite Series Rear Bumper for JL Wrangler – Tire Carrier Compatible
- Suits Jeep Wrangler JL 2018-2023 (all models)
- Bumper Meets Rear Flares To Create Convenient Step
- Elite Series is Available With Or Without A Tire Carrier – THIS BUMPER IS COMPATIBLE WITH THE WARN TIRE CARRIER
- State-Of-The-Art Flat Black Powder coated Finish. Stands Up To 408 Hour Salt Spray Testing And Excellent UV Protection
- Rear Parking, Blind Spot Sensor Compatible
- Maintains Factory Receiver
- Laser Cut And CNC-Formed Steel Construction
- Recessed Jack Points For More Stable Jack Positioning
- Sand Blasted Prior To Powder-Coat For Increased Coating Durability
- Mounting Fasteners Hidden Inside For Clean Finish And Reduced Fastener Corrosion
- Limited 1 Year Warranty
- Type: 1-Piece
- Tubular: No
- Air Bag Compatible: No
- Finish: Powder Coated
- Color: Black
- Material: Steel
- Drilling Required: No
- Hitch Type: Without Receiver
- Maximum Gross Trailer Weight: Without Receiver
- Maximum Tongue Weight: Without Receiver
- With Grille Guard: No
- With Grille Screen: No
- With Bull Bar: No
- With Winch Mount: No
- Winch Compatible: No
- Tow Hooks: With Tow Hooks
- D-Rings: With D-Ring Mounts
- With Light Cutouts: Yes
- Light Type: Lights – Sold Separately
- With Mounting Hardware: Yes
- With Skid Plate: No
- With Spare Tire Mount: No, but compatible
- With License Plate Mount: Yes
- With Jacking Points: Yes
- With CB Antenna Mount: No
- Estimated Install Time (Hours): 4
- Optional Add-on Tire Carrier
- INSTALLATION INSTRUCTIONS
$1,499.99 Add to cart
Rear Bumpers
Warn 102410 Elite Series Rear Bumper for JL Wrangler
- Suits Jeep Wrangler JL 2018-2023 (all models)
- Bumper Meets Rear Flares To Create Convenient Step
- Elite Series is Available With Or Without A Tire Carrier – THIS BUMPER IS NOT COMPATIBLE WITH THE WARN TIRE CARRIER
- State-Of-The-Art Flat Black Powder coated Finish. Stands Up To 408 Hour Salt Spray Testing And Excellent UV Protection
- Rear Parking, Blind Spot Sensor Compatible
- Maintains Factory Receiver
- Laser Cut And CNC-Formed Steel Construction
- Recessed Jack Points For More Stable Jack Positioning
- Sand Blasted Prior To Powder-Coat For Increased Coating Durability
- Mounting Fasteners Hidden Inside For Clean Finish And Reduced Fastener Corrosion
- Limited 1 Year Warranty
- Type: 1-Piece
- Tubular: No
- Air Bag Compatible: No
- Finish: Powder Coated
- Color: Black
- Material: Steel
- Drilling Required: No
- Hitch Type: Without Receiver
- Maximum Gross Trailer Weight: Without Receiver
- Maximum Tongue Weight: Without Receiver
- With Grille Guard: No
- With Grille Screen: No
- With Bull Bar: No
- With Winch Mount: No
- Winch Compatible: No
- Tow Hooks: With Tow Hooks
- D-Rings: With D-Ring Mounts
- With Light Cutouts: Yes
- Light Type: Lights – Sold Separately
- With Mounting Hardware: Yes
- With Skid Plate: No
- With Spare Tire Mount: No
- With License Plate Mount: Yes
- With Jacking Points: Yes
- With CB Antenna Mount: No
- Estimated Install Time (Hours): 4
- INSTALLATION INSTRUCTIONS
$1,399.99 Add to cart
Warn
Ships FREE !!
within 48 US States
WARN 101445 Optional Skid Plate for Elite Bumpers JL & JT
- Suits Jeep Wrangler JL 2018-2023 (all models) and Jeep Gladiator JT 2020-2023 (all models) WITH a Warn Elite Bumper
- Lower Bumper Skid Cover Protects Critical Components Such As Sway bar Disconnects
- Meets The Highest Quality Standards
- Built To Match Your Exact Requirements
- Easy To Install
- Limited 1 Year Warranty
Attributes
- Location: Under Bumper Mount
- Finish: Powder Coated
- Color: Black
- Material: Steel
- Logo: Warn Logo
- Installation Type: Bolt-On
- Includes Hardware: Yes
- Drilling Required: No
- Estimated Install Time (Hours): 0.5
$265.00 Add to cart
Front Bumpers
WARN 101330 Elite Series Stubby Front Winch Bumper for JL & JT
- Suits Jeep Wrangler JL 2018-2023 (all models) and Jeep Gladiator JT 2020-2023 (all models)
- This is a winch bumper – it’s highly recommended to only buy it if you plan to put a winch in, otherwise it will look unfinished from up top since there is no cover panel if no winch is installed
- Photos are shown with all added accessories. This is for the base bumper only, no winch or under protection plates are included
- Certified To Withstand An Industry-Leading 12,000 Pounds Of Pulling Force, Without Deformation
- Durable Flat Black Power-Coated Finish With Five-Stage Pretreat Process And Zirconium Nanotechnology, Engineered To Withstand 408 Hours Of Salt Spray Testing
- Winch Positioned To Deliver Maximum Airflow To The Engine Bay
- Stubby Version Allows For Mounting Of Driving Lights Above The Bumper
- Integrated Off-Road Jack Lifting Points And Shackle-Mounting Tabs
- Limited 1 Year Warranty
- Type: 1-Piece
- Tubular: No
- Air Bag Compatible: No
- Finish: Powder Coated
- Color: Black
- Material: Steel
- Drilling Required: No
- Hitch Type: Without Receiver
- Maximum Gross Trailer Weight: Without Receiver
- Maximum Tongue Weight: Without Receiver
- With Grille Guard: No
- With Grille Screen: No
- With Bull Bar: Yes
- With Winch Mount: Yes
- Winch Compatible: Yes
- Tow Hooks: With Tow Hook Mounts
- D-Rings: With D-Rings
- With Light Cutouts: No
- Light Type: No Lights
- With Mounting Hardware: Yes
- With Skid Plate: No
- With Spare Tire Mount: No
- With License Plate Mount: Yes
- With Jacking Points: No
- With CB Antenna Mount: No
- Estimated Install Time (Hours): 2
- Installation Instructions
- Optional Front Skid Plate Can Be Added
$999.99 Add to cart