Your cart is currently empty!
Dobinsons Spring & Suspension
Showing 931–960 of 1273 resultsSorted by popularity
-
Ranger PX3 (2018-2022) - Intl ModelDobinsons C19-518 Front Lifted Coil Springs | Ford Ranger PX3 3″ Lift
- Dobinsons C19-518 give 3.0″ of lift with 80-100KGS front end weight for 2018-2022 Ford Ranger PX3 International Model (not for USA trucks)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(3 reviews) -
Ranger PX3 (2018-2022) - Intl Model
Dobinsons C19-516 Front Lifted Coil Springs | Ford Ranger PX3 3″ Lift
- Dobinsons C19-516 give 3.0″ of lift with stock front end weight for 2018-2022 Ford Ranger PX3 International Model (not for USA trucks)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(4 reviews) -
Ranger PX3 (2018-2022) - Intl Model
Dobinsons C19-514 Front Lifted Coil Springs | Ford Ranger PX3 45mm Lift
- Dobinsons C19-514 give 45mm of lift with 80-100KGS front end weight for 2018-2022 Ford Ranger PX3 International Model (not for USA trucks)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(6 reviews) -
Ranger PX3 (2018-2022) - Intl Model
Dobinsons C19-512 Front Lifted Coil Springs | Ford Ranger PX3 45mm Lift
- Dobinsons C19-512 give 45mm of lift with 40-70KGS front end weight for 2018-2022 Ford Ranger PX3 International Model (not for USA trucks)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(4 reviews) -
Ranger PX3 (2018-2022) - Intl Model
Dobinsons C19-510 Front Lifted Coil Springs | Ford Ranger PX3 45mm Lift
- Dobinsons C19-510 give 45mm of lift with stock front end weight for 2018-2022 Ford Ranger PX3 International Model (not for USA trucks)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(6 reviews) -
Ranger PX (2012-2018) - Intl Model
Dobinsons C19-422 Front Lifted Coil Springs | Ranger BT-50
- Dobinsons C19-422 give 40mm of lift with stock weight for Ford Ranger PX1 and PX2 International Model 2011-2018 and Mazda BT-50 2011-2020 (not for USA trucks)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(6 reviews) -
Ranger PX (2012-2018) - Intl Model
Dobinsons C19-424 Front Lifted Coil Springs | Ranger BT-50
- Dobinsons C19-424 give 55mm of lift with stock weight, or 40mm of lift with 40-90KGS added front end weight for Ford Ranger PX1 and PX2 International Model 2011-2018 and Mazda BT-50 2011-2020 (not for USA trucks)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(8 reviews) -
Ranger PX (2012-2018) - Intl Model
Dobinsons C19-474 Front Lifted Coil Springs | Ranger BT-50
- Dobinsons C19-474 give 55mm of lift with 50-100KGS added front end weight for Ford Ranger PX1 and PX2 International Model 2011-2018 and Mazda BT-50 2011-2020 (not for USA trucks)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(5 reviews) -
Ranger PX (2012-2018) - Intl Model
Dobinsons C19-476 Front Lifted Coil Springs | Ranger BT-50
- Dobinsons C19-476 give 3.0″ of lift with 50-100KGS added front end weight for Ford Ranger PX1 and PX2 International Model 2011-2018 and Mazda BT-50 2011-2020 (not for USA trucks)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(8 reviews) -
Ranger PX (2012-2018) - Intl Model
Dobinsons C19-458 Front Lifted Coil Springs | Ranger BT-50
- Dobinsons C19-458 give 3.0″ of lift with stock weight for Ford Ranger PX1 and PX2 International Model 2011-2018 and Mazda BT-50 2011-2020 (not for USA trucks)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(8 reviews) -
Ranger PX (2012-2018) - Intl ModelFREE SHIPPING
within 48 US StatesDobinsons IMS19-50092 IMS Monotube 2.2″ IFP Front Struts Pair
- IMS front struts for 0-3.0″ of lift for Ford Ranger PX1 and PX2 International Model 2011-2018 and Mazda BT-50 2011-2020 (not for USA trucks)
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height is 190mm. See instructions on setting coil seat height on left
- New strut top mounts
- Can reuse OE coils and add lift via preload or add Dobinsons Front Coils
(7 reviews) -
Ranger PX (2012-2018) - Intl Model
Dobinsons SC19-009 Pair of Strut Top Plates
- Made specifically for the 4×4 2011-2018 International model Ford Ranger PX and 2011-2020 Mazda BT-50
- Not tested on any USA-spec trucks
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold in pairs
- Photo for illustration purposes
- Installation Instructions
(8 reviews) -
Dobinsons
Dobinsons SC19-010 Pair of Strut Top Plates
- Made specifically for the 4×4 2018-2022 International model Ford Ranger and 2019-2023 Ford Ranger USA model
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold in pairs
- Photo for illustration purposes
(3 reviews) -
Ranger PX3 (2018-2022) - Intl ModelFREE SHIPPING
within 48 US StatesDobinsons MRA19-A094 2.2″ 3-Way Adjustable Front Struts Pair
- Front struts for 0-3.0″ of lift for Ford Ranger PX3 2018-2022 (International Models, not for USA trucks)
- SOLD IN PAIRS
- Note: Photo is not of actual struts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your springs, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Can reuse OE strut top mount or buy new ones
- Can reuse OE coils and add lift via preload or add Dobinsons Front Coils
- NOTE: Dobinsons Front Sway Bar Link Kit must be purchased to run Dobinsons IMS struts
(5 reviews) -
Ranger PX3 (2018-2022) - Intl ModelFREE SHIPPING
within 48 US StatesDobinsons MRA19-A081T 2.2″ 3-Way Adjustable Rear Shocks Pair
- Pair of rear shocks for 0-2.5″ of lift for Ford Ranger PX2 and PX3 2011-2022 (International Models, not for USA trucks) and Mazda BT-50 2011-2020
- 3-way adjustable valving – adjust high and low speed compression and rebound
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your springs, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
(7 reviews) -
Ranger PX3 (2018-2022) - Intl ModelFREE SHIPPING
within 48 US StatesDobinsons IMS19-50081T IMS Monotube 2.2″ IFP Rear Shocks Pair
- IMS rear shocks for 0-2.5″ of lift for Ford Ranger PX2 and PX3 2011-2022 (International Models, not for USA trucks) and Mazda BT-50 2011-2020
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
(5 reviews) -
Ranger PX3 (2018-2022) - Intl ModelFREE SHIPPING
within 48 US StatesDobinsons IMS19-50094 IMS Monotube 2.2″ IFP Front Struts Pair
- IMS front struts for 0-3.0″ of lift for Ford Ranger PX3 2018-2022 (International Models, not for USA trucks)
- SOLD IN PAIRS
- Note: Photo is not of actual IMS struts. Ford Ranger IMS have a crossbar style lower front shock bush
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height is 167mm. See instructions on setting coil seat height on left
- Reuse OE strut top mount
- Can reuse OE coils and add lift via preload or add Dobinsons Front Coils
- NOTE: Dobinsons Front Sway Bar Link Kit must be purchased to run Dobinsons IMS struts
(8 reviews) -
Rear Drawers
Dobinsons DW59-021K Wing Side Panel Kit | Toyota Hilux Vigo
- Suits Toyota Hilux Vigo 2005-2015
- Complete wing kit for both sides to suit Dobinsons rear drawer systems
- Includes vertical and horizontal pieces, brackets and hardware
- Fills in the side parts left exposed once drawers have been installed, providing a neat finish
- Drawers are sold separately
(6 reviews) -
Hilux Vigo (2005-2015)
Dobinsons Toyota Hilux Vigo Rear Drawers Kit with Fridge Slide
- Suits Toyota Hilux Vigo 2005-2015
- Must remove factory bed liner if it’s installed
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- Built in Heavy Duty Fridge Slide
- 8 x Heavy Duty Stainless Steel Tie Down Points
- Requires tonneau cover or canopy
- Measures 51.1 x 39.4 x 10 inches (L, W, H), requires drilling of truck bed
- You can add an optional side wing panel kit down below, so that you can build out the edges of the drawers to the side of your bed
- Aluminum Edging Protection
- Heavy duty lockable latches
- Marine Carpet
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Ships to the nearest freight terminal for pickup, unless home delivery is option is added below. We will be in touch to let you know the terminal location
(5 reviews) -
Hilux Vigo (2005-2015)
Dobinsons 4×4 Snorkel Kit | Toyota Hilux Vigo 4.0L Gas Engine
- Suits Toyota Hilux Vigo 2005-2015 with the 4.0L gasoline engine
- If you have a diesel engine, use This One
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
(7 reviews) -
Hilux Vigo (2005-2015)
Dobinsons 4×4 Snorkel Kit | Toyota Hilux Vigo 3.0L Diesel
- Suits Toyota Hilux Vigo 2005-2015 with the 3.0L diesel engine
- If you have a gasoline engine, use This One instead
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
(3 reviews) -
Coil Springs - Hilux Vigo
Dobinsons Front Coil Spring Options | Toyota Hilux Vigo
- Suits Double Cab 4×4 2005-2015 Toyota Hilux Vigo
- Choose what lift height and load rating you need below
- Available in 3 different colors
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(6 reviews) -
Hilux Vigo (2005-2015)
Dobinsons 3-Way Adjustable MRR Hilux Vigo Lift Kit for 2005-2015 | 2-3″ Lift
- Suits Double Cab 4×4 2005-2015 Toyota Hilux Vigo
- Lifts 2-3″ over original stock height, depending what parts you choose
- If you want to lift and level the truck, go for 3″ up front and 2″ in the rear. That removes the rake of the truck
- Lifting the front and rear by the same amount keeps the factory rake
- Read HERE about the 3 different types of Dobinsons shocks
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Dobinsons MRR front struts are height adjustable by a fully threaded body
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat up front
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Coilover adjuster wrench is included for the fronts
- 3 different load ratings of leaf springs to choose from
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Choose your desired suspension parts to build the kit best suited to your weight
- Photos for reference only, actual product may appear different
- No parts are included if you don’t include them from the menu down below. The photo shows a complete suspension kit if all parts are purchased
(8 reviews) -
Hilux Vigo (2005-2015)
Dobinsons IMS Hilux Vigo Lift Kit for 2005-2015 | 2-3″ Lift
- Suits Double Cab 4×4 2005-2015 Toyota Hilux Vigo
- Lifts 2-3″ over original stock height, depending what parts you choose
- If you want to lift and level the truck, go for 3″ up front and 2″ in the rear. That removes the rake of the truck
- Lifting the front and rear by the same amount keeps the factory rake
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Fully rebuildable and re-valvable shocks
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Choose your desired suspension parts to build the kit best suited to your weight
- Photos for reference only, actual product may appear different
- No parts are included if you don’t include them from the menu down below. The photo shows a complete suspension kit if all parts are purchased
(5 reviews) -
Montero Pajero NM NP NS NT 2000+
Dobinsons C43-148 Front 1.75″ Lift Coil Springs | Montero Pajero 2000+ (Heavy Load) – Pair
- 1.75-2.0″ lift with 110-220LBS constant weight on a 2000+ Mitsubishi Pajero and Montero with a diesel engine
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(4 reviews) -
Montero Pajero NM NP NS NT 2000+
Dobinsons C43-191 Rear 1.75″ Lift Coil Springs | Mitsubishi Pajero SWB 2000+
- 1.75″ rear lift with 110-220LBS constant weight on a SWB Mitsubishi Pajero NM, NP, NS, NT, NW
- For SWB Short Wheel Base models
- Called a Montero in some countries, Pajero in most of the world
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(3 reviews) -
Hilux Vigo (2005-2015)
Dobinsons L59-041-R Leaf Springs Pair | Hilux Vigo 50mm lift Heavy Load
- Toyota Hilux Vigo 2005-2014
- These lift 50mm with up to 280KGS constant rear end load – Heavy Duty Leaf Springs
- This is a 7 leaf pack
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- These are leaf springs ONLY and don’t come with bushings or any other parts. Scroll down for add-ons that go with these springs
- Photo for illustration purposes only, not of actual part number
- These lifted leaf springs require the BA59-002 Brake Adjuster to be run with them
- Sold in pairs
- Links here to the necessary bushing kit and u-bolt kit to be able to mount these
(5 reviews) -
Hilux Vigo (2005-2015)
Dobinsons L59-040-R Leaf Springs Pair | Hilux Vigo 50mm lift Medium Load
- Toyota Hilux Vigo 2005-2014
- These lift 50mm with up to 100KGS constant rear end load
- This is a 6 leaf pack
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- These are leaf springs ONLY and don’t come with bushings or any other parts. Scroll down for add-ons that go with these springs
- Photo for illustration purposes only, not of actual part number
- These lifted leaf springs require the BA59-002 Brake Adjuster to be run with them
- Sold in pairs
- Links here to the necessary bushing kit and u-bolt kit to be able to mount these
(8 reviews) -
Hilux Vigo (2005-2015)
Dobinsons Hilux Vigo Lift Kit for 2005-2015 | 2-3″ Lift
- Suits Double Cab 4×4 2005-2015 Toyota Hilux Vigo
- Lifts 2-3″ over original stock height, depending what parts you choose
- If you want to lift and level the truck, go for 3″ up front and 2″ in the rear. That removes the rake of the truck
- Lifting the front and rear by the same amount keeps the factory rake
- Read HERE about the 3 different types of Dobinsons shocks
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- 4 different load ratings of leaf springs to choose from
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Choose your desired suspension parts to build the kit best suited to your weight
- Photos for reference only, actual product may appear different
- No parts are included if you don’t include them from the menu down below. The photo shows a complete suspension kit if all parts are purchased
(4 reviews) -
Hilux Vigo (2005-2015)
Dobinsons SK59-053 Greasable Shackle Kit Pair | Hilux Vigo
- Suits 2005-2015 Toyota Hilux Vigo
- Twin hole greasable design
- Reduces friction in bushes, creating a more comfortable ride
- Heavy duty design and provide simple service through external grease nipples
- Sold as a pair to replace the original shackles
- Incredibly tough and durable gold zinc plating
- Greasable pins for the other end of the leaf spring are available here
(8 reviews)
