Your cart is currently empty!
Armor
Showing 91–120 of 162 results
-
Rusty's Off RoadFREE SHIPPING
within 48 US StatesRusty’s Center Axle Disconnect Skid Plate – Bare Steel | JL Wrangler Gladiator JT
- Suits Jeep JL Wrangler 2018+ 2 door and 4door models and Jeep Gladiator JT 2020+
- Replaces the weak factory cover to properly protect your CAD (Center Axle Disconnect)
- The CAD is not going to work for long if it’s repeatedly hit against rocks
- The factory provides a thin stamped steel skid plate
- The CAD mechanism is very vulnerable and not adequately protected for real off-road use
- Rusty’s CAD Skid Plate is constructed of 1/4″ thick laser-cut steel
- CNC formed for an exact fit
- Installs easily using four existing bolt locations
- Rusty’s CAD Skid Plate is essential for any JL/JT that sees time in the dirt
- This Center Axle Disconnect Skid Plate is shown in the photos painted but will be shipped in a raw metal finish
- SHIPS IN BARE STEEL – YOU MUST PAINT OR POWDER COAT IT WHEN YOU RECEIVE IT
(9 reviews) -
Trail-GearLand Cruiser 80 Series Winch Mount
- Suits 1990-1997 Toyota Land Cruiser 80 Series and Lexus LX450
- Winch Mount is made from 1/4″ CNC-formed steel plate
- Use this winch mount as a base to build your own bumper, adding tubes or plates off the sides
- Mounting holes on the winch plate are drilled for most 5000-9500 model low-profile winches and smaller-sized 9.0R Warn competition winches
- Features a shackle receiver mount that will make a great anchor point for winch or strap recoveries
- Unpainted steel finish
- Made in the USA
- Ships by UPS Ground
- Installation Instructions
(9 reviews) -
Trail-Gear
Rock Defense Low Profile 80 Series Front Bumper w/Stinger
- Suits 1990-1997 Toyota Land Cruiser 80 Series and Lexus LX450
- Includes welded on stinger bar as the top tube
- Made out of 1020 DOM (1.75″ X .120″ wall).
- Winch mount is made out of a .25″ CNC formed steel plate
- Mounting holes on the winch plate are drilled for most 5000-9500 model low-profile winches and smaller sized 9.0R Warn competition winches
- Bumpers also features a shackle receiver
- Unpainted steel finish
- Will not work with roller type fairlead, requires hawse type fairlead
- Weight is 94LBS
- Made in the USA
- Ships by UPS Ground
- Installation Instructions
- Also sold without a stinger top tube added as pictured in some of the photos
(9 reviews) -
Sale!RCI Off Road
RCI Rear Tacoma Diff Skid Plate | Non-Hybrid | 2024+ Tacoma
- Suits Toyota Tacoma 2024+ Non-Hybrid
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/4″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- MADE IN THE USA
(0 reviews) -
Sale!Skid Plates
Rear Shock Mount Skids | 2005-2023 Tacoma
- Includes one pair of shock mount skid plates (Driver/Passenger)
- Protects low hanging shock mounts on 2005-2023 Toyota Tacoma models
- Includes all hardware for installation
- Product includes a heavy duty black powder coat finish
- Made of 3/16″ Steel
- Fits OEM, Icon, Fox, King, Eibach, Bilstein and many others
- DOES NOT FIT ICON RXT REAR SHOCKS WITH SIDE-MOUNTED EYELET
- Made in Colorado, USA
(6 reviews) -
Sale!Skid Plates
Rear Shock Mount Skids | 2024+ Tacoma
- Includes one pair of shock mount skid plates (Driver/Passenger)
- Protects low hanging shock mounts on 2024 Tacoma models
- Includes all hardware for installation
- Product includes a heavy duty black powder coat finish
- Made of 3/16″ Steel
- Compatibility confirmed with TRD-Offroad OEM Bilstein shocks and King aftermarket stocks. Designed for compatibility with all OEM shock options (Trailhunter OEM OME shocks, TRD PRO OEM FOX, shocks, Prerunner OEM Tokicos shocks, TRD Sport OEM shocks
- Made in USA
(2 reviews) -
Sale!Tacoma 4th Gen (2024+)
2024+ Tacoma Transfer Case Skid Plate from RCI
- For 2024+ Toyota Tacoma 4th Gen
- Protects third cross-member, transfer-case, and exhaust pipe
- Reinforced edges between cross-members for maximum strength and rigidity
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- All models include a heavy duty 3/16″ steel powder coated cross-member- aluminum option includes a powder coated steel cross-member
- Weights: 3/16″ Steel 24 LBS, 1/4″ Aluminum 12 LBS, Crossmember 15 LBS
- Verified to fit 4×4 TRD Offroad non-hybrid models. Suspected to fit other models, but not yet verified
- MADE IN LOVELAND, COLORADO, USA
(0 reviews) -
Sale!Tacoma 4th Gen (2024+)
2024+ Tacoma Transmission Skid Plate from RCI
- For 2024+ Toyota Tacoma 4th Gen
- Protects transmission, second and third cross-members
- Service openings for maintenance without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Weights: 3/16″ Steel 38 LBS, 1/4″ Aluminum 17 LBS
- Direct bolt on addition to existing factory attachment points, no drilling required
- Verified to fit 4×4 TRD Offroad non-hybrid models. Suspected to fit other models, but not yet verified
- MADE IN LOVELAND, COLORADO, USA
(0 reviews) -
Sale!Tacoma 4th Gen (2024+)
2024+ Tacoma Engine Skid Plate from RCI
- For 2024+ Toyota Tacoma 4th Gen
- Protects front two cross-members, low hanging front differential, and oil pan
- Service openings for easy service and oil changes without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Utilizes Center mounting points for maximum strength whether steel or aluminum
- Installs in minutes
- All hardware provided
- Weights: 3/16″ Steel 51 LBS, 1/4″ Aluminum 21 LBS
- Direct bolt on addition to existing factory attachment points, no drilling required
- Engine Skidplate requires the front crossmember below the radiator
- Verified to fit 4×4 TRD Offroad and TRD Pro Models
- If mounting to a Tacoma with out the factory front crossmember like TRD Sport, Limited or SR5 etc. you must add the additional Tacoma Front Skidplate Crossmember
- MADE IN LOVELAND, COLORADO, USA
(0 reviews) -
Rusty's Off RoadFREE SHIPPING
within 48 US StatesRusty’s JL Side Step Rocker Armor | JL Wrangler 4-DR 2024+
- Fits: 2024+ Jeep JL Wrangler 4-Door Models (will not fit 2023 and older or 2-Doors)
- Earlier 2018-2023 models use these instead
- Constructed of 2″ x 0.188-wall DOM tubing
- Fully welded for exceptional strength
- Built-in side step for easy entry as well as enhancing body protection
- Bolts to the frame at the chassis mounts
- Durable Satin Black powder coated finish
- Installation Instructions
- Removal of factory side steps or rails is required
- Built in Rainbow City, Alabama, USA
- Photos are of actual product. Side step is flat, not angled upward
(9 reviews) -
Rusty's Off RoadFREE SHIPPING
within 48 US StatesRusty’s JL Side Step Rocker Armor | JL Wrangler 4-DR 2018-2023
- Fits: 2018-2023 Jeep JL Wrangler 4-Door Models (will not fit 2024’s or 2-Doors)
- Constructed of 2″ x 0.188-wall DOM tubing
- Fully welded for exceptional strength
- Built-in side step for easy entry as well as enhancing body protection
- Bolts to the frame at the chassis mounts
- Durable Satin Black powder coated finish
- Installation Instructions
- Removal of factory side steps or rails is required
- Built in Rainbow City, Alabama, USA
- Photos are of actual product. Side step is flat, not angled upward
(10 reviews) -
TJ Wrangler (1996-2006)FREE SHIPPING
within 48 US StatesRusty’s LJ Rocker Armor with Step | LJ Wrangler 2003-2006
- Fits: 1997-2006 Jeep Wrangler LJ (TJ Unlimited, longer wheelbase)
- Constructed of 3/16″ thick steel
- Provides true wheel-to-wheel protection of the rockers
- Incorporates a handy tubular step that eases vehicle entry and egress that is 2″ x 0.120-wall DOM tubing
- Design helps keep trees away from the body sides while having a step for easier entry
- Durable black powder coated finish
- Six stainless steel button head bolts attach the Armor to the factory rockers, while eight flush-mounted Riv-nuts secure the Armor to the bottom of the Jeep tub
- Installation Instructions
- Built in Rainbow City, Alabama, USA
(9 reviews) -
TJ Wrangler (1996-2006)FREE SHIPPING
within 48 US StatesRusty’s TJ Rocker Armor with Step | TJ Wrangler 1997-2006
- Fits: 1997-2006 Jeep Wrangler TJ (not the LJ Unlimited)
- Constructed of 3/16″ thick steel
- Provides true wheel-to-wheel protection of the rockers
- Incorporates a handy tubular step that eases vehicle entry and egress that is 2″ x 0.120-wall DOM tubing
- Design helps keep trees away from the body sides while having a step for easier entry
- Durable black powder coated finish
- Six stainless steel button head bolts attach the Armor to the factory rockers, while eight flush-mounted Riv-nuts secure the Armor to the bottom of the Jeep tub
- Installation Instructions
- Built in Rainbow City, Alabama, USA
(6 reviews) -
Rusty's Off RoadFREE SHIPPING
within 48 US StatesRusty’s JL Rocker Armor with Kicker Tube | JL Wrangler 4-DR 2024+
- Fits: 2024 Jeep JL Wrangler 4-Door Models (will not fit pre-2024’s or 2-Doors)
- Constructed of 2″ x 0.188-wall DOM tubing
- Fully welded for exceptional strength
- Built-in step for easing entry as well as enhancing body protection
- Bolts to the frame
- Durable Satin Black powder coated finish
- Installation Instructions
- Removal of factory side steps or rails is required
- Built in Rainbow City, Alabama, USA
(7 reviews) -
Rusty's Off RoadFREE SHIPPING
within 48 US StatesRusty’s JL Rocker Armor with Kicker Tube | JL Wrangler 4-DR 2018-2023
- Fits: 2018-2023 Jeep JL Wrangler 4-Door Models (will not fit 2024’s or 2-Doors)
- Constructed of 2″ x 0.188-wall DOM tubing
- Fully welded for exceptional strength
- Built-in step for easing entry as well as enhancing body protection
- Bolts to the frame
- Durable Satin Black powder coated finish
- Installation Instructions
- Removal of factory side steps or rails is required
- Built in Rainbow City, Alabama, USA
(9 reviews) -
Sale!RCI Off Road
RCI Rear Tacoma Diff Skid Plate | TRD Sport / SR5 2016-2023
- Suits Toyota Tacoma 2016-2023 TRD Sport and SR5
- **This listing is for the 16-Present TRD SPORT / SR5 model Tacoma’s only, which has oil drain plug on the driver’s side. If your drain plug is on the driver’s side this is the correct part for your truck (photo doesn’t show actual product)*
- Tacoma’s with a passenger side drain plug, GO HERE
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/4″ for minimal loss in ground clearance
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- MADE IN THE USA
(6 reviews) -
Sale!RCI Off Road
RCI Rear Tacoma Diff Skid Plate | TRD Offroad / Pro 2016-2023
- Suits Toyota Tacoma 2016-2023 TRD Pro and TRD Offroad
- **This listing is for the 16-Present TRD OFFROAD/PRO model Tacoma’s only, which has oil drain plug on the passenger side. If your drain plug is on the passenger side this is the correct part for your truck*
- If you have a driver’s side drain plug, GO HERE
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/4″ for minimal loss in ground clearance
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- MADE IN THE USA
(3 reviews) -
Sale!4Runner 3rd Gen (1996-2002)
RCI Transfer Case Skid Plate | 1996-2002 4Runner
- Suits 3RD Gen Toyota 4Runner 1996-2002
- Protects third cross-member, transfer-case, and exhaust pipe
- Photos show this skid as well as others installed
- Built with 3/16″ CNC laser cut steel
- Excellent addition or replacement of weak, lightweight OEM skid plate that directly attaches to the transfer-case (this means impact will not disperse, rendering plate useless)
- Reinforced edges between cross-members for maximum strength and rigidity
- Utilizes carriage bolts for mounting, providing a low profile without the worry of damaging hardware
- Smooth, flat surface that easily slides over obstacles
- Black powder coated for rust resistant, durable and high quality finish
- Installs in minutes
- Hardware and installation instructions included
- Direct bolt on addition to existing factory attachment points, no drilling required
- Also works in conjunction with the RCI Engine and Transmission Skid Plates
- Made in the USA.
(3 reviews) -
Sale!4Runner 3rd Gen (1996-2002)
RCI A-Arm Skid Plates | 96-02 4Runner 95-04 Tacoma
- Suits 3RD Gen 4Runner and 1995-2004 Tacoma
- Protects A-arms
- Built of 3/16” CNC laser cut steel
- Smooth, flat surface that easily slides over obstacles
- Black powder coated for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Not compatible with OEM front skid plate (without cutting OEM plate)
- Sold as a pair
- Made in the USA.
(5 reviews) -
Sale!Tundra 2nd Gen (2007-2021)
RCI Rear Diff Skid Plate | 07-21 Tundra
- Suits 2nd Gen Tundra (2007-2021)
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/8″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA.
(6 reviews) -
Sale!Tundra 2nd Gen (2007-2021)
RCI A-Arm Skid Plates | 07-21 Tundra & 08-22 Sequoia
- Suits 2nd Gen Tundra (2007-2021) and Sequoia (2008-2022)
- Protects A-arms (front lower control arms)
- Sold as a pair
- Built with CNC laser cut 1/4″ aluminum
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA.
(3 reviews) -
Sale!Tundra 3rd Gen (2022-2024)
RCI 2023+ Sequoia & 2022+ Tundra A-Arm Skid Plates
- Suits 2022 Tundra (2022+) 4×4 Models Only (not for 2WD) and 2023+ Toyota Sequoia
- Protects A-arms (front lower control arms)
- Compatible with TRD engine skid plate
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in USA
(2 reviews) -
Sale!Tundra 3rd Gen (2022-2024)
RCI 2022+ Tundra & 2023+ Sequoia Hybrid Rear Diff Skid Plate
- Suits 2022 Tundra (2022+) 4×4 Models Only (not for 2WD) and 2023+ Toyota Sequoia – HYBRID MODELS ONLY
- The Hybrid model is slightly different in fitment than the regular models
-
**NOT COMPATIBLE ON STANDARD NON-HYBRID MODELS – SEE THAT SPECIFIC LISTING
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/8″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in USA
(2 reviews) -
Sale!Tundra 3rd Gen (2022-2024)
RCI 2022+ Toyota Tundra Rear Diff Skid Plate
- Suits 2022 Tundra (2022+) 4×4 Models Only (not for 2WD)
-
**NOT COMPATIBLE ON HYBRID MODELS – SEE HYBRID SPECIFIC LISTING
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/8″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in USA
(2 reviews) -
Sale!Tundra 3rd Gen (2022-2024)
RCI 2022+ Toyota Tundra Fuel Tank Skid Plate (32gal)
- Suits 2022 Tundra (2022+) 4×4 Models Only (not for 2WD)
- Protects the vulnerable fuel tank from accidental puncture
- Compatible with nearly all 4×4 trucks from 22-Present (skid is NOT compatible with 8 foot bed models). Requires Toyota rear fuel tank support strap from off-road model to bolt on skid plate
- Same mounting locations as factory skid plate but substantially sturdier metal construction
- Smooth, flat surface that easily slides over obstacles. No exposed bolt heads on skid plates on 26gal fuel skid plate
- 32 gal fuel tank skid plate incorporates welded bolt protection rings standard
- Direct bolt on addition, no drilling
- 12ga Steel Construction, weight is 49 LBS
- Includes heavy duty black powder coating for rust resistant, durable and high quality finish
- Installs in minutes
- All mounting hardware provided
- **PLEASE NOTE, VEHICLES WITHOUT OEM FUEL TANK SKID PLATE WILL NEED STUDDED TOYOTA FUEL TANK STRAPS TO INSTALL**
(6 reviews) -
Sale!Bumpers + Roof Racks - 5th Gen 4Runner
RCI 4Runner Pike Front Bumper for 2014-2024 4Runner
- Suits 2014-2024 Toyota 4Runner 5th Gen (won’t fit Limited or TRD Sport Models)
- Seamlessly matches the contours of the truck for a sleek fit and finish
- Features single row light bar compatibility with most 30″ light bars.
- Tall hoop and no hoop are compatible with adaptive cruise control (Low Hoop is not compatible with ACC)
- Built in winch mounting plate is tied directly to the frame of the truck and accommodates up to 10,000lb winches. (Designed for Warn, SuperWinch and many other winch models on the market)
- Fully gusseted frame mounts and sub structure
- Includes additional support brackets tying the bumper mounting surface to the frame and offering support for the plastic bumper once cut
- 3/4″ shackle mounts run through the bumper shell and are welded directly to frame mounts as well as shell.
- Bolt on addition to existing factory attachment points, no drilling or welding but does require trimming of the OEM plastic bumper
- Heavy duty satin black powder coat option with epoxy primer base coat for excellent durability and lasting good looks
- Material: 3/16″ Steel
- Weight: 80lbs No Hoop, 86lbs Low Hoop, 89lbs Tall Hoop
- Built in Loveland, Colorado, USA
- Built to order based on your preferences chosen
(6 reviews) -
Sale!Skid Plates, Sliders + Racks - Tacoma 2nd Gen
RCI Rear Tacoma Diff Skid Plate 2005-2015
- Suits Toyota Tacoma 2005-2015
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/4″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- MADE IN THE USA
(3 reviews) -
Rear BumpersFREE SHIPPING
within 48 US StatesTeraflex JL Alpha HD Hinged Spare Tire Carrier & Mount Kit
- Suits Jeep Wrangler JL 2018+ 2-door and 4-door
- Max Tire: 40”
- Wheel Pattern: 5×5”
- Innovative and unique design w/ easy adjustability
- Maintains single-handed entry to the rear cargo area
- Works w/ OEM and most aftermarket bumpers
- Simple installation using common hand tools
- No drilling required — uses factory mounting locations
- Dedicated CAD-designed tooling and CAE design
- FEA validation, ASTM, and SAE testing procedures
- 1,000-hour extreme salt spray testing
- OEM Quality UV resistant powder coat finish w/ 3,000-hour accelerated weather testing
- Alpha HD Hinged Spare Tire Carrier Kit:
- Eliminates tailgate stress and rattles
- Factory form fitting geometry and finish for an OEM appearance
- Threaded mounting holes for mounting accessories such as Hi-Lift and CB antennae brackets
- Hinged Carrier constructed from strong and lightweight A356.2 aluminum
- Heavy-duty forged steel brackets and mid-carbon hardened steel 5/8” hinge pins
- 14,000-cycle severe duty slam testing Alpha HD Adjustable Spare Tire Mount Kit:
- Easy fore/aft and height adjustments
- Relocates 3rd brake light from behind tailgate to behind spare tire
- Includes new quick-release 3rd Brake Light Mount
- Includes new hard-anodized billet aluminum Rearview Camera Mount
- Spare Tire Mount is formed and welded from CNC laser cut steel for superior strength
- Adjuster made from strong and lightweight 6061-T6 extruded aluminum
(9 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US States2005-2023 Tacoma T-Case and Exhaust Skid Plate – Black Steel
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Easy, bolt-on installation
- All necessary hardware included
- Black Powder Coated
- 3/16-inch steel construction
- Protects t-case and exhaust
- Easy, bolt-on installation
- All hardware included
- Bare steel and black powder coat versions available (bare steel versions require painting before installation)
- Installation Instructions
- Made in USA
(7 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US States2005-2023 Tacoma T-Case and Exhaust Skid Plate – Bare Steel
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Easy, bolt-on installation
- All necessary hardware included
- Bare steel versions require painting before installation
- 3/16-inch steel construction
- Protects t-case and exhaust
- Easy, bolt-on installation
- All hardware included
- Bare steel and black powder coat versions available (bare steel versions require painting before installation)
- Installation Instructions
- Made in USA
(7 reviews)
