Your cart is currently empty!
Skid Plates
Showing 31–60 of 95 resultsSorted by popularity
-
Skid PlatesRCI Lexus GX470 & GX460 V8 Transmission Skid Plate
- Fits USA spec Lexus GX470 and Lexus GX460 V8 Models 2003-2023
- Protects transmission, second and third cross-members, and exhaust
- Excellent addition or replacement of weak, lightweight OEM skid plates (which do not provide any coverage over transmission)
- Service openings for maintenance without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Built in drainage holes, which also help prevent suction of skid plates in mud and snow
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA
(4 reviews) -
Tacoma 3rd Gen (2016-2023)RCI Full Skid Plate Set | 2005-2023 Tacoma
- Includes front, transmission and transfer-case skid plates.
- Protects front two cross-members, low hanging front differential, oil pan, transmission, second and third cross-members, exhaust cross pipe, and transfer-case
- Excellent addition or replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Built in oil drain holes allow easy access and ability to change oil without removal of plate
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat standard on steel skid plates for a rust resistant, durable and high quality finish
- All transmission skid plates now come standard with center gussets, a feature exclusive to RCI. Due to the location of the transmission skid plate and spanning a two foot gap, skid plates in this area are prone to getting bent. With this plate that is no longer the case!
- ALL Transfer-case cross-members come standard with black powdercoat finish
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made to order
- Made in the USA
(9 reviews) -
Tacoma 4th Gen (2024+)
2024+ Tacoma Skid Plates Package from RCI
- For 2024+ Toyota Tacoma 4th Gen
- Includes engine, transmission and transfer-case skid plates.
- Protects front two cross-members, low hanging front differential, oil pan, transmission, second and third cross-members, exhaust cross pipe, and transfer-case
- Excellent addition or replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Built in oil drain hole allows easy access and ability to change oil without removal of plate
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat standard on steel skid plates for a rust resistant, durable and high quality finish
- Hardware included
- Direct bolt on addition to existing factory attachment points, no drilling required!
- Please note that some images show our A-Arm skid plates however they are not included with the skid plate package
- Verified to fit 4×4 TRD Offroad non-hybrid models. Suspected to fit other models, but not yet verified
- MADE IN LOVELAND, COLORADO, USA
(0 reviews) -
4Runner 3rd Gen (1996-2002)
RCI Transmission Skid Plate | 96-02 4Runner 95-04 Tacoma
- Suits 3RD Gen 4Runner and 1995-2004 Tacoma V6 and 4×4 Models ONLY
- Protects transmission and second and third cross-members
- Built with laser cut 3/16″ steel
- Excellent addition or replacement of weak, lightweight OEM skid plates (which do not provide ANY coverage of transmission)
- Service openings for maintenance without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Smooth, flat surface that easily slides over obstacles
- Black powder coated for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- V6 and 4×4 Models ONLY – does not fit 4 cylinder models or 2 wheel drive
- Made in the USA.
(2 reviews) -
Tundra 3rd Gen (2022-2024)
RCI Engine Skid Plate | Tundra 2022+ & Sequoia 2023+
- Suits 2022 Tundra (2022+) 4×4 Models Only (not for 2WD) and 2023+ Toyota Sequoia 4×4
- Choose from 10 gauge steel or 1/4″ 5052 Aluminum
- Some photos show additional transmission skid plate installed as well (sold separately)
- Protects power steering unit, front differential, front cross-member, engine, engine bay, and radiator
- Mounts to radiator cross-member without interfering with aftermarket bumpers, hidden winch, etc.
- Excellent replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Easy access to oil filter by removal of access door using only two bolts
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat standard on steel skid plates for a rust resistant, durable and high quality finish
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Weights: Steel = 45lbs. Aluminum = 30lbs
- Made to order
- Not compatible with 4″+ drop bracket lift kits (does work with all 1-3″ coilover lifts)
- Made in the USA.
(5 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US States2005-2023 Tacoma Transmission Skid Plate – Bare Steel
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Does not fit 2WD Pre-Runner or 2.7L Automatic Single Cab Tacoma
- 3/16-inch steel – Bare Steel – needs to be painted before installation
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
- Easy, bolt-on installation using all factory hardware
- Made in USA
- Requires All-Pro IFS Skid Plate
(7 reviews) -
Skid Plates, Sliders + Racks - Tacoma 3rd Gen
RCI Tacoma Transfer Case Skid Plate
- Fits Toyota Tacoma 2005-2023
- Protects third cross-member, transfer-case, and exhaust pipe
- Excellent addition or replacement of weak, lightweight OEM skid plate that directly attaches to the transfer-case (this means impact will not disperse, rendering plate useless)
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- All models include a heavy duty 3/16″ steel cross-member- aluminum option includes a powder coated steel cross-member
- All Cross-members come powder coated black for ALL options (bare steel/aluminum and powder coat steel/aluminum)
- Direct bolt on addition to existing factory attachment points, no drilling required
- Designed around stock exhaust system
- Made in the USA
(3 reviews) -
Skid Plates, Sliders + Racks - Tacoma 3rd Gen
RCI Gas Tank Skid Plate | Tacoma 2005-2023
- Fits all Toyota Tacoma from 2005-2023
- Black powder coat available for rust resistant, durable and high quality finish
- Simple bolt on installation
- All hardware and instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling
- Smooth, flat surface that easily slides over obstacles
- Material: 3/16” Steel or 1/4” 5052 Aluminum Alloy
- Weight: 3/16” Steel- 52lbs. Aluminum- 26lbs.
- Finish: Heavy Duty Black Powder Coat or Bare Metal
- Made in the USA
(3 reviews) -
Accessories
RCI Gas Tank Skid Plate | Toyota FJ Cruiser
- Fits all years of Toyota FJ Cruiser
- Black powder coated for rust resistant, durable and high quality finish
- Simple bolt on installation
- All hardware and instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling
- Smooth, flat surfaces that easily slides over obstacles
- Works with factory fuel tank only
- Material: 10 Gauge Steel
- Weight: 30lbs
- Finish: Heavy Duty Black Powder Coat
- Made in the USA
(3 reviews) -
4Runner 4th Gen (2003-2009)
RCI 4th Gen 4Runner V8 Transmission Skid Plate
- Fits Toyota 4Runner V8 Models 2003-2009
- Protects transmission, second and third cross-members, and exhaust
- Excellent addition or replacement of weak, lightweight OEM skid plates (which do not provide any coverage over transmission)
- Service openings for maintenance without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Built in drainage holes, which also help prevent suction of skid plates in mud and snow
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA
(6 reviews) -
Bronco (2021-2024+)
RCI Bronco Gas Tank Skid Plate | Ford Bronco 4-Door 2021+
- Suits 2021+ Ford Bronco 4-Door
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Simple bolt on installation
- All hardware and instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling
(2 reviews) -
4Runner 3rd Gen (1996-2002)
RCI Engine Skid Plate | 96-02 4Runner 95-04 Tacoma
- Suits 3RD Gen 4Runner and 1995-2004 Tacoma Dual Cab (won’t fit regular cab)
- Protects front two cross-members, low hanging front differential, radiator, and oil pan
- Service openings for easy service and oil changes without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA.
(4 reviews) -
4Runner 5th Gen (2010-2024)
RCI Rear 4Runner Diff Skid Plate | 2010-2024 4Runner w/KDSS
- Suits Toyota 4Runner 5th Gen 2010-2024 WITH KDSS
- Look at this other skid setup for non-KDSS models if you have a regular sway bar
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/4″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- MADE IN THE USA
(3 reviews) -
GX460 (2010-2023)
RCI Lexus GX460 Transfer Case Skid Plate
- Fits USA spec Lexus GX460 V8 Models 2010-2023
- Protects third cross-member, transfer-case, and exhaust pipe
- Excellent addition or replacement of weak, lightweight OEM skid plate that directly attaches to the transfer-case (this means impact will not disperse, rendering plate useless)
- Reinforced edges between cross-members for maximum strength and rigidity
- Smooth, flat surface that easily slides over obstacles
- Heavy duty black powder coat finish is standard on steel skid plates and available on aluminum version
- Installs in minutes
- All hardware and installation instructions provided
- All models include a heavy duty 3/16″ steel cross-member- aluminum option includes a powder coated steel cross-member
- Support Cross-member comes is black powder coated steel on both steel and aluminum skid plate options
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA
(5 reviews) -
Skid PlatesFREE SHIPPING
within 48 US StatesARB 5421110 Under Vehicle Protection Kit | Toyota 4Runner 5th Gen (with KDSS)
- Suits all Toyota 4Runner 5th Gen models from 2010 to 2024 WITH KDSS
- You must check to make sure you have KDSS before ordering this kit
- 3mm pressed and folded sheet steel adds more strength than a standard folded sheet.
- Laser cut sheet steel.
- Zinc plated and powder coated with a silver textured finish.
- Recessed mounting bolts are protected and easy to remove for vehicle servicing.
- The Under Vehicle Protection will fit with or without an ARB front bumper. Fitment has not been confirmed with other aftermarket bumper designs
- Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
- See more details below as well as product video
(9 reviews) -
Skid PlatesFREE SHIPPING
within 48 US StatesARB 5423010 Toyota Tacoma Skid Plate Set | 2005-2023 4×4
- Suits all Toyota Tacoma 4×4 models from 2005 to 2023 (2nd and 3rd Gen)
- 3mm pressed and folded sheet steel adds more strength than a standard folded sheet.
- Laser cut sheet steel.
- Zinc plated and powder coated with a silver textured finish.
- Recessed mounting bolts are protected and easy to remove for vehicle servicing.
- The Under Vehicle Protection will fit with or without an ARB front bumper. Fitment has not been confirmed with other aftermarket bumper designs
- Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
- See more details below as well as product video
(11 reviews) -
Skid Plates - LC250
RCI Land Cruiser 250 Catalytic Guards | 2024-2025
- Suits Toyota Land Cruiser 250 from 2024+
- Covers open space between frame and transmission skid plate
- Compatible with both steel and aluminum RCI transmission skid plates – REQUIRED
- Powder coated with a two stage primer and textured black powder coat for an extremely durable, high quality finish
- All hardware and installation instructions provided
- Installs in minutes
- Made in the USA
- INSTALL GUIDE (Click Here)
- Recommended to run in conjunction with the Engine Skid Plate and Transmission Skid Plate
- Transmission skid plate is REQUIRED in order to run these catalytic guards
- Please note, some images show the transmission skid plate that is necessary for installing the catalytic guards however the skid plate is not included with the catalytic guards
(0 reviews) -
Skid Plates - LC250
RCI Land Cruiser 250 Transfer Case Skid Plate | 2024-2025
-
- Suits Toyota Land Cruiser 250 from 2024+ and Hybrid 2024+ Tacoma TRD Pro DCSB Iforce Max
- Protects third cross-member, transfer-case, and exhaust pipe
- Reinforced edges between cross-members for maximum strength and rigidity
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Compatible with Hybrid Model
- Made in the USA
- INSTALL GUIDE (Click Here)
- Recommended to run in conjunction with the Engine Skid Plate and Transmission Skid Plate
(0 reviews) -
-
Skid Plates - LC250
RCI Land Cruiser 250 Transmission Skid Plate | 2024-2025
-
- Suits Toyota Land Cruiser 250 from 2024+ and Hybrid 2024+ Tacoma TRD Pro DCSB Iforce Max
- Protects transmission, second and third cross-members
- Service openings for maintenance without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Compatible with Hybrid model
- Made in the USA
- INSTALL GUIDE (Click Here)
- Recommended to run in conjunction with the Engine Skid Plate
(0 reviews) -
-
Skid Plates - LC250
RCI Land Cruiser 250 Engine Skid Plate | 2024-2025
- Suits Toyota Land Cruiser 250 from 2024+
- Protects front two cross-members, low hanging front differential, and oil pan
- Service openings for easy service and oil changes without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Utilizes Center mounting points for maximum strength whether steel or aluminum
- Installs in minutes
- All hardware provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA
- INSTALL GUIDE (Click Here)
(0 reviews) -
Skid Plates
RCI Subaru Front Lip Plate | 2020-2025
- Suits US-model Subaru Outback from 2020-2025 Models
- Designed for use in combination with RCI Front skid plate (required)
- Protects center of OEM front bumper
- Smooth, flat surface that easily slides over obstacles
- Features 3/16″ 5052 Aluminum
- Black powder coat for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware is included
- Direct bolt on no drilling required
(0 reviews) -
Skid Plates
RCI Subaru Outback Transmission Skid Plate | 2020-2025
- Suits US-model Subaru Outback from 2020-2025 Models
- Protects transmission and sub-frame
- Excellent addition or replacement of weak, lightweight OEM skid plates (which do not provide full coverage over transmission)
- Service openings for maintenance without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Features steel mounting brackets for strength and durability
- Smooth, flat surface that easily slides over obstacles
- Features 3/16″ 5052 Aluminum
- Black powder coat for rust resistant, durable and high quality finish
- Utilizes manufacturer’s mounting locations for maximum strength and ease of installation
- Designed to accommodate ALL trim levels and compatible with turbo models
- Prioritizes air flow and heat dissipation for mechanical components
- Installs in minutes
- All hardware and installation instructions provided
- 16 LBS
- Installation Instructions
(0 reviews) -
Skid Plates
RCI Subaru Outback Engine Skid Plate | 2020-2025
- Suits US-model Subaru Outback from 2020-2025 Models
- Protects front two cross-members , oil pan and turbo if equipped
- Service openings for easy service and oil changes without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protection surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Features 3/16″ 5052 Aluminum
- Black powder coat for rust resistant, durable and high quality finish
- Utilizes manufacturer’s mounting locations for maximum strength and ease of installation
- Designed to accommodate ALL trim levels and compatible with turbo models
- Prioritizes air flow and heat dissipation for mechanical components
- Installs in minutes
- All hardware and installation instructions provided
- 16 LBS
- Installation Instructions
- Additional Front Lip Piece is Sold Separately!!!
(0 reviews) -
Skid Plates, Sliders + Racks - Tacoma 4th Gen
Rear Control Arm Skids | 2024+ Tacoma
- Suits 2024+ Toyota Tacoma with coil spring rear suspension
- Protects the front of the rear lower control arm links and factory link mounts on the frame
- Smooth, flat surface that easily slides over obstacles
- Black powder coat included for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Includes heavy duty hardware
- Kit includes both driver and passenger side lower link skids
- Confirmed Fitment on 24′ TRD OR only should fit all Tacoma models with rear coil suspension
- Made in USA
- Installation Instructions
(0 reviews) -
Skid Plates - JL WranglerFREE SHIPPING
within 48 US StatesRusty’s JL Wrangler 3.6L Engine Skid
- Suits Jeep JL Wrangler 2018-2023 Models
- Protects the vulnerable engine oil pan
- Adds necessary protection for doing any sort of off roading
- Protect your expensive investment – engines aren’t cheap!!
- Rusty’s Skid Plate is constructed of 3/16″ thick laser-cut steel
- CNC formed for an exact fit
- Integrated access panel for oil changes
- Installs easily, bolts in place, comes with new hardware
- SHIPS IN BARE STEEL – YOU MUST PAINT OR POWDER COAT IT WHEN YOU RECEIVE IT
- Verify with the attached photos and a visual inspection of your Jeep to make sure you order the correct parts!!
(9 reviews) -
Rusty's Off RoadFREE SHIPPING
within 48 US StatesRusty’s Rear Lower Control Arm Skid Plates Frame Side – Bare Steel | Gladiator
- Suits Jeep JT Gladiator 2020+
- Sold in Pairs
- Protects your rear control arm mounts from damage
- Keeps it all secured tightly for off roading
- Protect your expensive investment – frame repair is not cheap!!
- Rusty’s Skid Plate is constructed of 1/4″ thick laser-cut steel
- CNC formed for an exact fit
- No welding is required
- Installs easily, bolts in place, comes with new hardware
- SHIPS IN BARE STEEL – YOU MUST PAINT OR POWDER COAT IT WHEN YOU RECEIVE IT
(7 reviews) -
Rusty's Off RoadFREE SHIPPING
within 48 US StatesRusty’s Rear Axle Lower Shock Skid Plates – Bare Steel | Gladiator
- Suits Jeep JT Gladiator 2020+
- Not compatible with shock extension brackets
- Sold in Pairs
- Protects your rear shocks and axle side shocks mounts from trail damage!
- Keeps it all secured tightly for off roading
- Protect your expensive investment – shocks aren’t cheap!!
- Rusty’s Skid Plate is constructed of 1/4″ thick laser-cut steel
- CNC formed for an exact fit
- No welding is required
- Installs easily, bolts in place, comes with new hardware
- SHIPS IN BARE STEEL – YOU MUST PAINT OR POWDER COAT IT WHEN YOU RECEIVE IT
(6 reviews) -
Rusty's Off RoadFREE SHIPPING
within 48 US StatesRusty’s Rear Lower Control Arm Skid Plates Axle Side – Bare Steel | Gladiator
- Suits Jeep JT Gladiator 2020+
- Not compatible with shock extension brackets
- Does not include shock skid plate, as shown in some photos. Those are sold separately
- Sold in Pairs
- Protects the vulnerable low hanging control arm mounts of the rear axle
- Keeps it all secured tightly for off roading
- Protect your expensive investment – control arms aren’t cheap!!
- Rusty’s Skid Plate is constructed of 1/4″ thick laser-cut steel
- CNC formed for an exact fit
- No welding is required
- Installs easily, bolts in place, comes with new hardware
- SHIPS IN BARE STEEL – YOU MUST PAINT OR POWDER COAT IT WHEN YOU RECEIVE IT
(5 reviews) -
Rusty's Off RoadFREE SHIPPING
within 48 US StatesRusty’s Rear Lower Control Arm Skid Plates Axle Side – Bare Steel | JL Wrangler
- Suits Jeep JL Wrangler 2018+ 2 door and 4door models
- Not compatible with shock extension brackets
- Protects the vulnerable low hanging shock mounts of the rear axle
- Keeps it all secured tightly for off roading
- Protect your expensive investment – shocks aren’t cheap!!
- Rusty’s Skid Plate is constructed of 1/4″ thick laser-cut steel
- CNC formed for an exact fit
- No welding is required
- Installs easily, bolts in place, comes with new hardware
- SHIPS IN BARE STEEL – YOU MUST PAINT OR POWDER COAT IT WHEN YOU RECEIVE IT
(10 reviews) -
Rusty's Off RoadFREE SHIPPING
within 48 US StatesRusty’s Rear Lower Control Arm Skid Plates Frame Side – Bare Steel | JL Wrangler
- Suits Jeep JL Wrangler 2018+ 2 door and 4door models (not 392 though)
- Sold in pairs
- Protects the weak factory low hanging frame mounts of the rear lower control arms
- Keeps it all secured tightly for off roading
- Rusty’s Skid Plate is constructed of 1/4″ thick laser-cut steel
- CNC formed for an exact fit
- No welding is required
- Installs easily, bolts in place, comes with new hardware
- SHIPS IN BARE STEEL – YOU MUST PAINT OR POWDER COAT IT WHEN YOU RECEIVE IT
(7 reviews)
