Your cart is currently empty!
Accessories
Showing 301–330 of 472 resultsSorted by popularity
-
Factor 55Factor 55 FlatLink E (Expert) Shackle Mount (7 Colors)
- Large pear-shaped shackle mounting hole allows for attachment to either the pin or bow end of common screw pin shackles, as well as common OEM recovery points.
- Easy to install, FlatLink can be used with steel or synthetic winch lines up to 3/8” in diameter
- The rope eye is retained in the FlatLink with a 5/8” diameter 6AI-4V grade V titanium
- Precision machined from 6000 series billet aluminum, Military Specification Anodizing (Mil-A-8625 F Type III) hard anodized gray finish.
- Works with common 3/4” shackles (pin and bow end), soft shackles up to 3/4”
- Less than 1.75” of thick, when folded flat
- Maximum Load: 16,000 lbs., Ultimate failure : greater than 40,000lbs
- Compatible with all roller fairlead license plate mounting brackets
- EPDM Rubber Guard protects alloy fairleads and cushions line stowage, and eliminates hook rattle and fairlead damage
- Simple snap ring removal for shear pin
- Weight: 26 oz.
(13 reviews) -
Factor 55Factor 55 FlatLink Shackle Mount (8 Colors)
- Double-shear pin and internal snap ring for an ultrasecure connection
- EPDM rubber guards are attached with four barbed tips; it cushions line stowage, protects fairleads and prevents rattling
- Precision machined from 6000 series aluminum
- Easy to install, FlatLink can be used with steel or synthetic winch lines up to 3/8” in diameter and works with common 3/4” shackles (pin and bow end) or soft shackles up to 3/4”
- The rope eye is retained in the FlatLink with a 5/8” diameter 6AI-4V grade V titanium
- Less than 1.75” of thick, when folded flat
- Max load rating: 16,000lbs, Ultimate failure : greater than 40,000lbs
- Weight: 23 oz.
- Engineered, Tested, and Made in USA. Patent pending
(13 reviews) -
Factor 55FREE SHIPPING
within 48 US StatesFactor 55 ProLink E (Expert) Shackle Mount (7 Colors)
- Unique shape offers increased versatility allowing for increased rigging options
- 5/8” diameter 6AI-4V titanium double-shear pin and internal snap ring for an ultra-secure connection
- EPDM rubber guards are attached with four barbed tips; it cushions line stowage, protects fairleads and prevents rattling
- Precision machined from 6000 series aluminum
- Connects to either the pin or bow end of common ¾” screw pin shackles, compatible with steel or synthetic rope up to 3/8”
- Connects to the pin ends of 7/8” and 1” screw pin shackles
- Fits over most OEM tow hooks
- Maximum load: 16,000 lbs, Ultimate Strength: 40,000 lbs
- Weight: 32 oz
- Engineered, Tested, and Made in USA. Patent pending
(13 reviews) -
Factor 55
Factor 55 ProLink Shackle Mount (8 Colors)
- 5/8 inch diameter 6Al-4V titanium double shear pin and internal snap ring for an ultra-secure connection
- EPDM rubber guards are attached with four barbed tips and protects fairleads and prevents rattling, also protects alloy fairleads and cushions line stowage
- Precision machined from 6061-T6 Kaiser Aluminum round bar
- 1.2 inch shackle tab thickness reduces “shackle rattle”
- Works with steel or synthetic rope up to 3/8” diameter and eyes equipped with standard or tube thimbles up to 3/8” diameters.
- The rope eye is retained in the ProLink with a 5/8”-diameter grade 6AI-4V grade V
- Stress analyzed using COSMOS FEA and destructively tested for confirmation
- Max load rating: 16,000 lbs.
- Weight: 24 oz
- Engineered, Tested, and Made in USA. Patent pending
(13 reviews) -
Lighting
Dobinsons Wiring Harness for 155 Watt LED Lights
- Suitable for Zenith driving light LED Pair
- Includes switch, relay, and wiring harness, plug and play style
- Water proof light connector, harness comes with 1 x male plug end
- Very fast to install
- May suit other brands of lights, check connection photo for verification
(0 reviews) -
Rear Drawers
Dobinsons DW59-036K Wing Side Panel Kit for 4th Gen 4Runner
- Suits Toyota 4Runner 4th Gen 2003-2009
- Complete wing kit for both sides to suit Dobinsons rear drawer systems
- Includes vertical and horizontal pieces, brackets and hardware
- Fills in the side parts left exposed once drawers have been installed, providing a neat finish
- Drawers are sold separately
(3 reviews) -
Sale!Rooftop Tents
Overland Vehicle Systems Nomadic 3 Extended Roof Top Tent
- Body Material: 600D Poly Cotton Rip Stop
- Rainfly Material: 420D Polyester Oxford Waterproof Rainfly
- Travel Cover: 1000G PVC Heavy Duty Matt Black Travel Cover
- Open Dimensions: 63” x 122” x 51”
- Closed Dimensions: 63” x 47” x 11”
- Sleeping Footprint: 62” x 94.5”
- Sleeping Capacity: 3 Plus
- Roof Tent Weight: 140 lbs
- Weight Capacity: 850lbs
- Skylight: Opening in Both Rainfly and Tent Body
- Window Mesh: 120G Fade-less Gaze Breathable Windows
- Vent Ridges: 2 Vent Ridges to Help Air Flow
- Mattress: 3” High Density Foam Mattress with Black Quilted Cover
- Base: Double Insulated One-Piece Black Plated Base
- Window Rods: Set of 2 Short and 4 Long Window Rods with “V” Strength Ridges
- Hinges: Marine Grade 304 Stainless Steel Construction and Hardware
- Interior Poles: Oversized Aluminum Anodize Light Weight Constructions with Black Sleeve
- Ladder: 96” Telescoping Ladder with locking Strap Steel Double Sheer Attachment Hinges and Quick Release
- Storage: 4 Built in Interior Storage Pouches
- Storage Loft: Removable Storage Loft
- Storage: 2 Shoe Pouches
- Interior Lighting: Removable 40” Velcro Light Strip
- Treatment: PU3000 Waterproofing on Canvas
- Stakes and Paracord Rope: Ground Stakes, Paracord Ropes and Storage Bag Included
- Extras: LED Handheld Light and Storage Bag
- Set Up Time: 4 Minutes
- Stow Away Time: 4 Minutes
- Warranty: 4 Year Limited Warranty
(8 reviews) -
Sale!Rooftop Tents
Overland Vehicle Systems Nomadic 2 Extended RTT Roof Top Tent
- Body Material: 600D Poly Cotton Rip Stop
- Rainfly Material: 420D Polyester Oxford Waterproof Rainfly
- Travel Cover: 1000G PVC Heavy Duty Matt Black Travel Cover
- Skylight: Opening in Both Rainfly and Tent Body
- Window Mesh: 120G Fade-less Gaze Breathable Windows
- Vent Ridges: 2 Vent Ridges to Help Air Flow
- Mattress: 3” High Density Foam Mattress with Black Quilted Cover
- Base: Double Insulated One-Piece Black Plated Base
- Window Rods: Set of 2 Short and 4 Long Window Rods with “V” Strength Ridges
- Hinges: Marine Grade 304 Stainless Steel Construction and Hardware
- Interior Poles: Oversized Aluminum Anodize Light Weight Constructions with Black Sleeve
- Ladder: 96” Telescoping Ladder with locking Strap Steel Double Sheer Attachment Hinges and Quick Release
- Storage: 4 Built in Interior Storage Pouches
- Storage Loft: Removable Storage Loft
- Storage: 2 Shoe Pouches
- Interior Lighting: Removable 40” Velcro Light Strip
- Treatment: PU3000 Waterproofing on Canvas
- Stakes and Paracord Rope: Ground Stakes, Paracord Ropes and Storage Bag Included
- Extras: LED Handheld Light and Storage Bag
- Open Dimensions: 55” x 122” x 51”
- Closed Dimensions: 55” x 47” x 11”
- Sleeping Footprint: 55” x 94.5”
- Sleeping Capacity: 2 Plus
- Weight Capacity: 750lbs
- Set Up Time: 4 Minutes
- Stow Away Time: 4 Minutes
- Warranty: 4 Year Limited Warranty
(8 reviews) -
Sale!Rooftop Tents
Overland Vehicle Systems Nomadic 3 Standard Roof Top Tent
- Body Material: 600D Poly Cotton Rip Stop
- Rainfly Material: 420D Polyester Oxford Waterproof Rainfly
- Travel Cover: 1000G PVC Heavy Duty Matt Black Travel Cover
- Skylight: Opening in Both Rainfly and Tent Body
- Window Mesh: 120G Fade-less Gaze Breathable Windows
- Vent Ridges: 2 Vent Ridges to Help Air Flow
- Mattress: 3” High Density Foam Mattress with Black Quilted Cover
- Base: Double Insulated One-Piece Black Plated Base
- Window Rods: Set of 2 Short and 4 Long Window Rods with “V” Strength Ridges
- Hinges: Marine Grade 304 Stainless Steel Construction and Hardware
- Interior Poles: Oversized Aluminum Anodize Light Weight Constructions with Black Sleeve
- Ladder: 96” Telescoping Ladder with locking Strap Steel Double Sheer Attachment Hinges and Quick Release
- Storage: 4 Built in Interior Storage Pouches
- Storage Loft: Removable Storage Loft
- Storage: 2 Shoe Pouches
- Interior Lighting: Removable 40” Velcro Light Strip
- Treatment: PU3000 Waterproofing on Canvas
- Stakes and Paracord Rope: Ground Stakes, Paracord Ropes and Storage Bag Included
- Extras: LED Handheld Light and Storage Bag
- Open Dimensions: 63” x 95” x 51”
- Closed Dimensions: 63” x 47” x 11”
- Sleeping Footprint: 62” x 94.5”
- Sleeping Capacity: 3 Plus
- Weight Capacity: 850lbs
- Set Up Time: 4 Minutes
- Stow Away Time: 4 Minutes
- Warranty: 4 Year Limited Warranty
(8 reviews) -
Sale!Rooftop Tents
Overland Vehicle Systems Nomadic 2 Standard RTT Roof Top Tent
- Body Material: 600D Poly Cotton Rip Stop
- Rainfly Material: 420D Polyester Oxford Waterproof Rainfly
- Travel Cover: 1000G PVC Heavy Duty Matt Black Travel Cover
- Skylight: Opening in Both Rainfly and Tent Body
- Window Mesh: 120G Fade-less Gaze Breathable Windows
- Vent Ridges: 2 Vent Ridges to Help Air Flow
- Mattress: 3” High Density Foam Mattress with Black Quilted Cover
- Base: Double Insulated One-Piece Black Plated Base
- Window Rods: Set of 2 Short and 4 Long Window Rods with “V” Strength Ridges
- Hinges: Marine Grade 304 Stainless Steel Construction and Hardware
- Interior Poles: Oversized Aluminum Anodize Light Weight Constructions with Black Sleeve
- Ladder: 96” Telescoping Ladder with locking Strap Steel Double Sheer Attachment Hinges and Quick Release
- Storage: 4 Built in Interior Storage Pouches
- Storage Loft: Removable Storage Loft
- Storage: 2 Shoe Pouches
- Interior Lighting: Removable 40” Velcro Light Strip
- Treatment: PU3000 Waterproofing on Canvas
- Stakes and Paracord Rope: Ground Stakes, Paracord Ropes and Storage Bag Included
- Extras: LED Handheld Light and Storage Bag
- Open Dimensions: 54” x 95” x 51”
- Closed Dimensions: 54” x 47” x 11”
- Sleeping Footprint: 53” x 94.5”
- Sleeping Capacity: 2 Plus
- Weight Capacity: 750lbs
- Set Up Time: 4 Minutes
- Stow Away Time: 4 Minutes
- Warranty: 4 Year Limited Warranty
(8 reviews) -
Roof Racks
RCI 18″ HD Truck Bed Rack
- For Short Bed Trucks from 46-58″ in Bed Length
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier, Ford Ranger, Chevy Colorado, GMC Canyon, Ford F150, Toyota Tundra, etc
- Mount anything from lights, Hi-lift, CO2 tank, fire extinguisher, quick-fist, roto-pax, spare tire, roof top tent, bike mounts, roof baskets, etc
- This is our HD model, utilizing three cross-members spanning the truck bed, this rack is has the highest weight capacity and provides even weight distribution on the trucks bed side rails
- Built in mounting points allow unlimited options for adding accessories
- Bolts to inside of bed rails or can alternatively be mounted with optional “drill-free” clamps *Many Toyota and Jeep models can be bolted directly to accessory bed rails
- Rack is 18″ tall from bed rail to top of rack
- Maintains complete visibility through the back window of most trucks due to its added height
- Slotted mounting points on top of rack accept nearly any roof top tent, allowing tent to be bolted on in a matter of minutes
- Adjustable width adapts to any truck bed from 56.5″ – 64″ width between the bed rails
- Tall enough to fit up to a 35″ spare tire in the bed of a Tacoma, with even more room on full size pickups
- Includes TWO top braces for unlimited accessory and tent mounting options
- Heavy duty black textured powdercoat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer for an exponentially more durable finish
- Easy bolt together assembly, takes about 45 minutes to install
- All hardware and installation instructions provided
- Adjustable Bedrack Install Guide
- Made in Loveland, Colorado USA
(4 reviews) -
Roof Racks
RCI 12″ High HD Aluminum Truck Bed Rack
- For Short Bed Trucks from 46-58″ in Bed Length
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier, Ford Ranger, Chevy Colorado, GMC Canyon, Ford F150, Toyota Tundra, etc
- Rack is 12″ tall from bed rail to top of rack
- Low Profile design keeps a roof top tent lower than the roof line for better aerodynamics
- Weighs only 68 lbs compared to the steel version at 95lbs
- Built with .190″ heavy duty aluminum and 14ga steel telescoping top braces
- Mount anything from lights, Hi-lift, CO2 tank, fire extinguisher, quick-fist, roto-pax, spare tire, roof top tent, etc
- This is our HD model, utilizing three cross-members spanning the truck bed, this rack is has the highest weight capacity and provides even weight distribution on the trucks bed side rails
- Built in mounting points allow unlimited options for adding accessories
- Bolts to inside of bed rails or can alternatively be mounted with optional “drill-free” clamps
- Adjustable width adapts to any truck bed from 54″ – 64″ width between the bed rails
- Maintains very good visibility through the back window despite the low overall rack height
- Using this rack will minimize the aerodynamic drag normally associated with roof top tents by keeping it largely below the roof-line
- Slotted mounting points on top of rack accept nearly any roof top tent making mounting a breeze
- Includes TWO top braces for unlimited accessory and tent mounting options
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer for an exponentially more durable finish
- Easy bolt together assembly, takes about 45 minutes to install
- All hardware for installation is included
- Adjustable Bedrack Install Guide
- Made in Loveland, Colorado USA
(6 reviews) -
RCI Off Road
RCI Rear Tacoma Diff Skid Plate | TRD Sport / SR5 2016-2023
- Suits Toyota Tacoma 2016-2023 TRD Sport and SR5
- **This listing is for the 16-Present TRD SPORT / SR5 model Tacoma’s only, which has oil drain plug on the driver’s side. If your drain plug is on the driver’s side this is the correct part for your truck (photo doesn’t show actual product)*
- Tacoma’s with a passenger side drain plug, GO HERE
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/4″ for minimal loss in ground clearance
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- MADE IN THE USA
(6 reviews) -
RCI Off Road
RCI Rear Tacoma Diff Skid Plate | TRD Offroad / Pro 2016-2023
- Suits Toyota Tacoma 2016-2023 TRD Pro and TRD Offroad
- **This listing is for the 16-Present TRD OFFROAD/PRO model Tacoma’s only, which has oil drain plug on the passenger side. If your drain plug is on the passenger side this is the correct part for your truck*
- If you have a driver’s side drain plug, GO HERE
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/4″ for minimal loss in ground clearance
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- MADE IN THE USA
(3 reviews) -
4Runner 3rd Gen (1996-2002)
RCI Transfer Case Skid Plate | 1996-2002 4Runner
- Suits 3RD Gen Toyota 4Runner 1996-2002
- Protects third cross-member, transfer-case, and exhaust pipe
- Photos show this skid as well as others installed
- Built with 3/16″ CNC laser cut steel
- Excellent addition or replacement of weak, lightweight OEM skid plate that directly attaches to the transfer-case (this means impact will not disperse, rendering plate useless)
- Reinforced edges between cross-members for maximum strength and rigidity
- Utilizes carriage bolts for mounting, providing a low profile without the worry of damaging hardware
- Smooth, flat surface that easily slides over obstacles
- Black powder coated for rust resistant, durable and high quality finish
- Installs in minutes
- Hardware and installation instructions included
- Direct bolt on addition to existing factory attachment points, no drilling required
- Also works in conjunction with the RCI Engine and Transmission Skid Plates
- Made in the USA.
(3 reviews) -
4Runner 3rd Gen (1996-2002)
RCI A-Arm Skid Plates | 96-02 4Runner 95-04 Tacoma
- Suits 3RD Gen 4Runner and 1995-2004 Tacoma
- Protects A-arms
- Built of 3/16” CNC laser cut steel
- Smooth, flat surface that easily slides over obstacles
- Black powder coated for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Not compatible with OEM front skid plate (without cutting OEM plate)
- Sold as a pair
- Made in the USA.
(5 reviews) -
Tundra 2nd Gen (2007-2021)
RCI Rear Diff Skid Plate | 07-21 Tundra
- Suits 2nd Gen Tundra (2007-2021)
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/8″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA.
(6 reviews) -
Tundra 2nd Gen (2007-2021)
RCI A-Arm Skid Plates | 07-21 Tundra & 08-22 Sequoia
- Suits 2nd Gen Tundra (2007-2021) and Sequoia (2008-2022)
- Protects A-arms (front lower control arms)
- Sold as a pair
- Built with CNC laser cut 1/4″ aluminum
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA.
(3 reviews) -
Tundra 3rd Gen (2022-2024)
RCI 2023+ Sequoia & 2022+ Tundra A-Arm Skid Plates
- Suits 2022 Tundra (2022+) 4×4 Models Only (not for 2WD) and 2023+ Toyota Sequoia
- Protects A-arms (front lower control arms)
- Compatible with TRD engine skid plate
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in USA
(2 reviews) -
Tundra 3rd Gen (2022-2024)
RCI 2022+ Tundra & 2023+ Sequoia Hybrid Rear Diff Skid Plate
- Suits 2022 Tundra (2022+) 4×4 Models Only (not for 2WD) and 2023+ Toyota Sequoia – HYBRID MODELS ONLY
- The Hybrid model is slightly different in fitment than the regular models
-
**NOT COMPATIBLE ON STANDARD NON-HYBRID MODELS – SEE THAT SPECIFIC LISTING
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/8″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in USA
(2 reviews) -
Tundra 3rd Gen (2022-2024)
RCI 2022+ Toyota Tundra Rear Diff Skid Plate
- Suits 2022 Tundra (2022+) 4×4 Models Only (not for 2WD)
-
**NOT COMPATIBLE ON HYBRID MODELS – SEE HYBRID SPECIFIC LISTING
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/8″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in USA
(2 reviews) -
Tundra 3rd Gen (2022-2024)
RCI 2022+ Toyota Tundra Fuel Tank Skid Plate (32gal)
- Suits 2022 Tundra (2022+) 4×4 Models Only (not for 2WD)
- Protects the vulnerable fuel tank from accidental puncture
- Compatible with nearly all 4×4 trucks from 22-Present (skid is NOT compatible with 8 foot bed models). Requires Toyota rear fuel tank support strap from off-road model to bolt on skid plate
- Same mounting locations as factory skid plate but substantially sturdier metal construction
- Smooth, flat surface that easily slides over obstacles. No exposed bolt heads on skid plates on 26gal fuel skid plate
- 32 gal fuel tank skid plate incorporates welded bolt protection rings standard
- Direct bolt on addition, no drilling
- 12ga Steel Construction, weight is 49 LBS
- Includes heavy duty black powder coating for rust resistant, durable and high quality finish
- Installs in minutes
- All mounting hardware provided
- **PLEASE NOTE, VEHICLES WITHOUT OEM FUEL TANK SKID PLATE WILL NEED STUDDED TOYOTA FUEL TANK STRAPS TO INSTALL**
(6 reviews) -
WinchesFREE SHIPPING
within 48 US StatesOVS SCAR Waterproof 10K Winch | Wire Rope | Wireless Remote
- Single Line Rated Pull: 10,000lb
- Motor: 7.0hp Series Wound
- Waterproof: IP68 Rated
- Voltage: 12V
- Control: Wireless Remote w. 11.5’ Lead with Built in Lithium Battery
- Gear Train: 3 Stage Planetary Gear Systems with Ring Gear
- Gear Ratio: 181:1
- DB Output: Low (aka, it’s quiet)
- Clutch: Rotating Ring Gear
- Braking Action: Automatic Out-Of-Drum
- Drum Size: 2.5” x 8.8”
- Mounting Bolt Pattern: 10” x 4.5”
- Overall Dimensions: 21.3” L x 6.3” W x 7.9” H
- Line Speed: 42’ Per Minute
- Steel Cable: 11/32” x 85’
- Hook: Heavy Duty with Clip
- Fairlead: 4-Way Roller Fairlead (not pictured)
- Electric Cable: 70” x 25 mm2
- Solenoid: 500A (Heavy – Duty)
- Recommended Battery: 650CCA Minimum.
- Weight: 81 lbs
- Warranty: Limited Lifetime Warranty Mechanical,
- 5 Year Electrical Warranty
(5 reviews) -
Bumpers + Roof Racks - 5th Gen 4Runner
RCI 4Runner Pike Front Bumper for 2014-2024 4Runner
- Suits 2014-2024 Toyota 4Runner 5th Gen (won’t fit Limited or TRD Sport Models)
- Seamlessly matches the contours of the truck for a sleek fit and finish
- Features single row light bar compatibility with most 30″ light bars.
- Tall hoop and no hoop are compatible with adaptive cruise control (Low Hoop is not compatible with ACC)
- Built in winch mounting plate is tied directly to the frame of the truck and accommodates up to 10,000lb winches. (Designed for Warn, SuperWinch and many other winch models on the market)
- Fully gusseted frame mounts and sub structure
- Includes additional support brackets tying the bumper mounting surface to the frame and offering support for the plastic bumper once cut
- 3/4″ shackle mounts run through the bumper shell and are welded directly to frame mounts as well as shell.
- Bolt on addition to existing factory attachment points, no drilling or welding but does require trimming of the OEM plastic bumper
- Heavy duty satin black powder coat option with epoxy primer base coat for excellent durability and lasting good looks
- Material: 3/16″ Steel
- Weight: 80lbs No Hoop, 86lbs Low Hoop, 89lbs Tall Hoop
- Built in Loveland, Colorado, USA
- Built to order based on your preferences chosen
(6 reviews) -
Skid Plates, Sliders + Racks - Tacoma 2nd Gen
RCI Rear Tacoma Diff Skid Plate 2005-2015
- Suits Toyota Tacoma 2005-2015
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/4″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- MADE IN THE USA
(3 reviews) -
Recovery
MAXTRAX MKII Mounting Pins (40mm bolts)
- Sold in a set of four, enough to mount one or two sets of MAXTRAX (two or four boards total).
- 40mm bolt length, see attached photo for description
- 40mm and 17mm refers to the length of bolt used to mount the pins- both the 40mm and 17mm pins will hold either one or two sets of MAXTRAX.
- Designed to mount to your MAXTRAX to wherever you can mount these pins on your vehicle
- M10 stainless bolt has a provision for a small padlock
- Please Note: Antiseize recommended on install
- SOLD AS A SET OF FOUR
(2 reviews) -
Recovery
MAXTRAX MKII Mounting Pins (17mm bolts)
- Sold in a set of four, enough to mount one or two sets of MAXTRAX (two or four boards total).
- 17mm bolt length, see attached photo for description
- 40mm and 17mm refers to the length of bolt used to mount the pins- both the 40mm and 17mm pins will hold either one or two sets of MAXTRAX.
- Designed to mount to your MAXTRAX to wherever you can mount these pins on your vehicle
- M10 stainless bolt has a provision for a small padlock
- Please Note: Antiseize recommended on install
- SOLD AS A SET OF FOUR
(4 reviews) -
RecoveryFREE SHIPPING
within 48 US StatesMAXTRAX MKII Olive Drab Recovery Boards
- Equipped with our patented Keyhole, MAXTRAX MKII is compatible with our Mounting Pin Set and Rear Wheel Harness.
- Fiber-reinforced, engineering-grade nylon construction won’t break, crack or stress whiten after use—or we’ll replace it for free
- UV stable material won’t fade or degrade in the sun, they’d know—Maxtrax are based in Sunny Queensland
- Proprietary material resists wheel spin without risking tire damage for non-professional users
- Lifetime warranty against manufacturing faults and workmanship
- Six built-in handles and a shovel on each end make MAXTRAX perfect for use in sand, snow, or mud
- 45L x 13W x 3.5H, 7.5LB (3.4KG) per board, 15LB (6.8KG) per pair
- Made in Australia, from Australian materials
- Includes a LIFETIME warranty against faults in materials and workmanship, along with a set of MAXTRAX Telltale leashes to pull your MAXTRAX out of the muck!
- SOLD IN PAIRS
- Made in multiple different colors, subject to availability
(4 reviews) -
RecoveryFREE SHIPPING
within 48 US StatesMAXTRAX MKII Gunmetal Grey Recovery Boards
- Equipped with our patented Keyhole, MAXTRAX MKII is compatible with our Mounting Pin Set and Rear Wheel Harness.
- Fiber-reinforced, engineering-grade nylon construction won’t break, crack or stress whiten after use—or we’ll replace it for free
- UV stable material won’t fade or degrade in the sun, they’d know—Maxtrax are based in Sunny Queensland
- Proprietary material resists wheel spin without risking tire damage for non-professional users
- Lifetime warranty against manufacturing faults and workmanship
- Six built-in handles and a shovel on each end make MAXTRAX perfect for use in sand, snow, or mud
- 45L x 13W x 3.5H, 7.5LB (3.4KG) per board, 15LB (6.8KG) per pair
- Made in Australia, from Australian materials
- Includes a LIFETIME warranty against faults in materials and workmanship, along with a set of MAXTRAX Telltale leashes to pull your MAXTRAX out of the muck!
- SOLD IN PAIRS
- Made in multiple different colors, subject to availability
(2 reviews) -
RecoveryFREE SHIPPING
within 48 US StatesMAXTRAX MKII Turquoise Recovery Boards
- Equipped with our patented Keyhole, MAXTRAX MKII is compatible with our Mounting Pin Set and Rear Wheel Harness.
- Fiber-reinforced, engineering-grade nylon construction won’t break, crack or stress whiten after use—or we’ll replace it for free
- UV stable material won’t fade or degrade in the sun, they’d know—Maxtrax are based in Sunny Queensland
- Proprietary material resists wheel spin without risking tire damage for non-professional users
- Lifetime warranty against manufacturing faults and workmanship
- Six built-in handles and a shovel on each end make MAXTRAX perfect for use in sand, snow, or mud
- 45L x 13W x 3.5H, 7.5LB (3.4KG) per board, 15LB (6.8KG) per pair
- Made in Australia, from Australian materials
- Includes a LIFETIME warranty against faults in materials and workmanship, along with a set of MAXTRAX Telltale leashes to pull your MAXTRAX out of the muck!
- SOLD IN PAIRS
- Made in multiple different colors, subject to availability
(5 reviews)
