Your cart is currently empty!
Accessories
Showing 61–90 of 475 resultsSorted by popularity
-
Rear BumpersFREE SHIPPING
within 48 US StatesDobinsons 60 Series Rear Bumper with Tire + Jerry Can Carrier FJ60 FJ62 Series 9/1985+
- Late-1985 and onwards models only due to rear cross member difference. Using it on an earlier model will require customization on customer’s end
- The earlier model frames are not as wide as the later model, so you’ll have to make fill-in pieces for proper fitment
- Comes standard as Black Powder Coat
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included. Now includes twin jerry can holder
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- Installation Page
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
(12 reviews) -
Rear DrawersDobinsons DW59-030K Wing Side Panel Kit for Lexus GX460
- Suits Lexus GX460 2010-2023
- Complete wing kit for both sides to suit Dobinsons rear drawer systems
- Includes vertical and horizontal pieces, brackets and hardware
- Fills in the side parts left exposed once drawers have been installed, providing a neat finish
- Drawers are sold separately
(3 reviews) -
Rear Drawers
Dobinsons DW59-023K Wing Side Panel Kit for 100 Series
- Suits Toyota Land Cruiser 100 Series and Lexus LX470
- Complete wing kit to suit Dobinsons rear drawer systems
- Includes vertical and horizontal pieces, brackets and hardware
- Fills in the side parts left exposed once drawers have been installed, providing a neat finish
- Drawers are sold separately
(3 reviews) -
4Runner 5th Gen (2010-2024)FREE SHIPPING
within 48 US StatesRCI 5th Gen 4Runner Engine Skid Plate without KDSS
- Fits non-KDSS Model 5th Gen 4Runners 2010-2024
- Includes front skid plate ONLY
- Protects front two cross-members, low hanging front differential, oil pan, transmission, second and third cross-members, exhaust cross pipe, and transfer-case
- Excellent addition or replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Built in oil drain holes allow easy access and ability to change oil without removal of plate
- Engine skid plates come standard with center mounting posts for substantially increased strength
- Engine skid plate includes differential drop cage for maximum security and ground clearance, PLUS this feature allows the use of differential drop kits without having to space the skid plate down
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat finish is standard on steel skid plates for a rust resistant, durable and high quality finish, optional on aluminum
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA
(4 reviews) -
Sale!RecoveryFREE SHIPPING
within 48 US StatesOVS Tow Strap 30,000 lb. 3″ x 30′ Gray With Black Ends & Storage Bag
Construction
- Manufactured out heavy duty synthetic fiber with a 30,000 lb. breaking strength
- 30 foot long 3 inch wide folded and double stitched end with a heavy-duty padded protective sleeve
- Loop size is 10 inch which is ideal for all types of rigging including soft shackles and D Rings
- Tightly woven 30 strands per inch reinforced synthetic fiber material for extra durability
- Soft and pliable material flexes easy with no stretch and is ideal for static recovery situations
- Included storage bag with mesh at the bottom that allows dirt and debris to escape
Functions
- Ideal for daisy chaining vehicles through tough obstacles or long pulls with inoperable vehicle
- Can be used as a winch extension when extra length is needed
- Clean all mud and sand off of all synthetic ropes and straps as soon as you get home. Sand granules have sharp edges that can cut into the fibers at the microscopic level reducing the safe load rating
(8 reviews) -
Tundra 2nd Gen (2007-2021)FREE SHIPPING
within 48 US StatesRCI Engine Skid Plate | 07-21 Tundra & 08-22 Sequoia
- Suits 2nd Gen Tundra (2007-2021) and Sequoia (2008-2022)
- Includes front engine skid plate only
- Protects power steering unit, front differential, front cross-member, engine, engine bay, and radiator
- Mounts to radiator cross-member without interfering with aftermarket bumpers, hidden winch, etc.
- Excellent replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Easy access to oil filter by removal of access door using only two bolts
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat standard on steel skid plates for a rust resistant, durable and high quality finish
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA.
(6 reviews) -
Tacoma 3rd Gen (2016-2023)
RCI Rock Sliders | 2016-2023 Tacoma
- Fits 2016-2023 Tacoma 4wd access cab and double cab trucks
- Protects rocker panels and doors
- Our sliders utilize a 2″ square main tube which is far stronger than 1.75″ round tube used by competitors
- 1.75″ DOM outer rails are now standard for uncompromised strength
- Heavy duty 1/4″ gussets on all legs
- 45 degree mitered main tube ends provide a superior aesthetic appearance as well as more functional design that won’t hang up
- Full length 3/16″ frame plate and FOUR leg design guarantee a slider as strong or stronger than anything on the market
- Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
- Standard 20 degree upward angle creates a low profile with maximum ground clearance
- Direct bolt on addition to existing mounting locations, no drilling required
- Easy install with only basic hand tools
- Grade 8 hardware and installation instructions provided
- Standard with our signature low profile rear kickout
- Made to order from your selections below
- Made in USA
(8 reviews) -
4Runner 4th Gen (2003-2009)
RCI Rock Sliders | 03-09 4Runner + GX 470
- Fits 2003-2009 4runners without Xreas, unless you’ve removed those lines. Also fits 03-09 GX470, however it will require removing the factory steps / trim below the body pinch seam
- Protects rocker panels and doors
- Our sliders utilize a 2″ square main tube which is far stronger than 1.75″ round tube used by competitors
- 1.75″ DOM outer rails are now standard for uncompromised strength
- Heavy duty 1/4″ gussets on all legs
- 45 degree mitered main tube ends provide a superior aesthetic appearance as well as more functional design that won’t hang up
- Full length 1/4″ frame plate and three leg design guarantee a slider as strong or stronger than anything on the market
- Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
- 5° upward angle creates a low profile with maximum ground clearance, while remaining usable as a step
- Direct bolt on addition to existing mounting locations, no drilling required
- Easy install with only basic hand tools
- Grade 8 hardware and installation instructions provided
- Standard with our signature low profile rear kickout
- *Does not fit KDSS models of GX470, unless you remove KDSS system from frame
- Made to order from your selections below
- Made in USA
(5 reviews) -
Accessories
Dobinsons 4×4 Roll Out Awning 6.5FT x 9.8FT Medium Size with LED Light
- Measures 2.0M (6.5FT) against the vehicle, extending out 3.0M (9.8FT) away from the vehicle
- Heavy Duty Waterproof, Breathable Rip-stop 420D PU Oxford Polyester
- Could mount to left or right hand side
- Complete with Fitting Instructions & Tools, Poles, Ropes & Pegs
- Quick, Simple Setup & Pack Up. Manually opens and closes (not automatic)
- Includes LED Light strip
(10 reviews) -
RecoveryFREE SHIPPING
within 48 US StatesDobinsons 12V Electric Winch – 12000 LBS with Synthetic Rope
- 12,000 Capacity
- 6.5HP Series Wound Motor
- 216:1 Gear Reduction
- 57 LBS Weight
- 10×4.5″ Mounting Pattern
- 6.3 x 8.3 x 21.5″ Overall Dimensions
- 64 x 224mm Drum, Automatic Braking Action
- 3 Stage Planetary Gears
- Plug in Control Range of 10 FT
- Includes Various Control Box Mounting Brackets: Control Box to Cross Rods, Motor Housing & Flat Surface/Bumper Tops
- Sealed Solenoid Box, More Powerful
- Easy Quick Flop Clutch
- Improved Casings
- Motor Housing Breather
- Includes 100FT Synthetic Rope with Hook, Aluminum Hawse Fairlead, Hand Held Control and Wireless Remote (30ft Range)
(11 reviews) -
Hats Shirts PatchesFREE SHIPPING
within 48 US StatesExit Offroad Stickers – Pair
- Pair of Exit Offroad stickers
- Genuine Exit Offroad logo with green backing and white letters and inner border, with green outsider border for a neat finish
- Measures 3.5″ wide by 2.25″ tall – it is set at an angle as the pictures show
- Item ships by USPS 1st Class Mail – always ships separate from any parts ordered
- 1st Class Mail does not provide a tracking number, it’s a regular letter size envelope
(20 reviews) -
Rear Drawers
Dobinsons DW59-035K Wing Side Panel Kit for 5th Gen 4Runner
- Suits Toyota 4Runner 2010-2024 without a 3rd row seat
- Complete wing kit for both sides to suit Dobinsons rear drawer systems
- Includes vertical and horizontal pieces, brackets and hardware
- Fills in the side parts left exposed once drawers have been installed, providing a neat finish
- Drawers are sold separately
(3 reviews) -
4Runner 4th Gen (2003-2009)FREE SHIPPING
within 48 US StatesRCI Rear Diff Skid Plate | 03-09 4Runner GX470
- Suits Toyota 4Runner 4th Gen 2003-2009 and Lexus GX470 WITHOUT KDSS
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/4″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- MADE IN THE USA
(4 reviews) -
4Runner 5th Gen (2010-2024)FREE SHIPPING
within 48 US StatesRCI Rear 4Runner Diff Skid Plate | 2010-2024 4Runner
- Suits Toyota 4Runner 5th Gen 2010-2024 WITHOUT KDSS
- If you have KDSS, you’ll need THIS ONE
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/4″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
(4 reviews) -
RecoveryFREE SHIPPING
within 48 US StatesOVS Combo Pack Soft Shackle 7/16″ 41,000 lb. and Recovery Ring 4.0″ 41,000 lb. Gray
- OVS Soft Shackle Combo Pack
- Contains Soft Shackle 7/16 inch 41,000 lb. With Loop and Abrasive Sleeve – 23 inch With Storage Bag
- And Recovery Ring 4.00 inch 41,000 lb. Gray With Storage Bag
- The ultimate must have for your Overland or Offroad Rig.
(8 reviews) -
RecoveryFREE SHIPPING
within 48 US StatesOVS Multi Functional Military Style Utility Shovel with Nylon Carrying Case
- Adjustable Spade with Two Positions to Dig or Trench From
- Two Stage Black Powder Coat that won’t corrode or rust
- Overall Length 22.75-Inch
- Collapsed 9.25 inch
- Spade 8.25-inch x 6.1-inch with Roll Edge on Rear and Side For Added Strength
- Nylon Reinforced Carrying Case
- Functions as an entrenching tool, trail recovery tool or hunting tool
(3 reviews) -
RecoveryFREE SHIPPING
within 48 US StatesOverland Vehicle Systems Tire Repair Kit – 53 Piece Kit With Black Storage Box
- Over-sized T Style Handle Reamer and Probe
- 53 Piece
- Self-Vulcanized Plugs
- Extended Heavy-Duty Needle Nose Pliers
- Pencil Style Dual Pressure Gauge and Dual Chuck
- Valve Repair Kit Which Includes Valve Cores
- Plastic and Chrome Valve Caps
- Tire Deflators and 4 Way Valve Tool Kit
(3 reviews) -
AccessoriesFREE SHIPPING
within 48 US StatesAll Pro 5th Gen 4Runner Overland Roof Rack – Aluminum
- All Pro 5th Gen 4Runner Overland Roof Rack – suits 2010-2024 models
- Expansive rooftop cargo storage
- Keeps your sunroof clear
- Strong and lightweight all-aluminum construction
- All parts are powder coated in black
- Compatible with 4Runners with moon roofs and “shark fin” style antennae
- No drilling required for installation
- Six (6) attachment points (3 left, 3 right) to secure the rack
- Available with a blank deflector or light bar-compatible deflector. Both deflectors are designed to minimize wind noise
- Select which front wind deflector you would like when ordering, below. Standard (not cutout) or cutout (cutout for a 40″ light bar)
- Adjustable crossbars slide forward/rearwards as needed
- Each crossbar is pre-drilled for Rotopax mounts, Maxtrax or Tred recovery boards, and Quickfist clamps and is easily customizable for other mounting needs
- Purchase additional crossbars (P/N AP-309339) for increased load capacity
- Compatible with most rooftop tents
- Only 42LBS Total Weight!!!
- Made in the USA
- 5052 aluminum construction
- Zinc-plated hardware
- Black powder coat
- Height above the roof is approximately 2.5-inches
- Lightbar deflector (optional) is compatible with a 40-inch single row light bar (42 inches between mounting tabs)
- Crossbars have no crevices where debris may accumulate
- LOAD CAPACITY – The roof rack is designed to support the equivalent of a rooftop tent with occupants. Load capacity will vary based on the number of crossbars used and their configuration. Consumers are expected to use sound judgment and common sense with regard to the loads they carry using this rack system. Purchase additional crossbars (P/N AP-309339) for increased load capacity
- Installation Instructions
(3 reviews) -
Air CompressorsFREE SHIPPING
within 48 US StatesARB CKMA12 High Performance Medium 12V Air Compressor
- Designed specifically to run one or two Air Lockers and to air up tires (requires kit)
- Constructed of lightweight, high-strength, engineering-grade materials, including military and aerospace-grade components
- Relocatable, splash-resistant air filter with washable high-flow sintered bronze filter cartridge for cleaner, cooler air supply
- Fully sealed components for moisture and dust protection
- Over-pressure safety valve-equipped
- Pressure switch-controlled air manifold system specially designed for ARB Air Lockers
- Hard-anodized cylinder bore and PTFE-impregnated carbon fiber piston seal for reduced friction and maximum life
- Anti-vibration, sound-deadening, anodized mount dissipates motor heat and allows compressor to be repositioned 180 degrees
- Ball bearing-equipped motor (no bushings) with unique, linear brush, pre-load system for long life, low heat, and quiet operation
- Compressor piston equipped with a German-made, high shock-rated, cylindrical roller bearing
- Motor is internally thermal-protected against extreme temperature damage
- Comprehensive-photo illustrated installation guide
- 12V DC, Draws 14.2 Amps, 2.34 CFM, 100 PSI max
(3 reviews) -
Skid PlatesFREE SHIPPING
within 48 US StatesRCI Full Skid Plate Set | 2010-2024 4Runner
- Includes front, transmission and transfer-case skid plates.
- Optional add-on catalytic converter guards
- Protects front two cross-members, low hanging front differential, oil pan, transmission, second and third cross-members, exhaust cross pipe, and transfer-case
- Excellent addition or replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Built in oil drain holes allow easy access and ability to change oil without removal of plate
- Engine skid plates come standard with center mounting posts for substantially increased strength
- Engine skid plate includes differential drop cage for maximum security and ground clearance, PLUS this feature allows the use of differential drop kits without having to space the skid plate down
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat finish is standard on steel skid plates for a rust resistant, durable and high quality finish, optional on aluminum
- All transmission skid plates now come standard with center gussets, a feature exclusive to RCI. Due to the location of the transmission skid plate and spanning a two foot gap, skid plates in this area are prone to getting bent. With this plate that is no longer the case!
- ALL Transfer-case cross-members come standard with black powdercoat finish
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made to order. Email us for lead times
- Made in the USA
- New option to add Catalytic Converter Guards – INSTRUCTIONS
(8 reviews) -
Rear Drawers
Dobinsons DW59-028K Wing Side Panel Kit for Lexus GX470
- Suits Lexus GX470 2003-2009
- Complete wing kit for both sides to suit Dobinsons rear drawer systems
- Includes vertical and horizontal pieces, brackets and hardware
- Fills in the side parts left exposed once drawers have been installed, providing a neat finish
- Drawers are sold separately
(3 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesOVS Highline Slide Out Glamping Storage System
- Reversable mounting for passenger or driver side of your overland vehicle
- Bungee cord retention rigging to keep the gear from falling out of the shelves
- All 3 shelves are lined with marine grade carpeting that will not mold or mildew
- Marine grade stainless steel hardware
- Can be mounted on the driver or passenger side by removing the 14 bolts on the back panel and moving it to the other side
- Body Material: 6061 Aircraft Grade Aluminum Body with two stage powder coat
- Shelving: QTY 3
- Reversable: Yes
- Slide Locking: Yes
- Closed Dimensions: 32.68” x 7.64” x 26.18”
- Extended Dimensions: 61.03” x 7.64” x 26.18”
- Warranty: 5 Year Limited Warranty
(6 reviews) -
Skid Plates, Sliders + Racks - Tacoma 3rd GenFREE SHIPPING
within 48 US StatesAll Pro Tacoma Catalytic Converter Guards for 2016-2023 V6 4WD Auto
- Suits 2016-2023 Toyota Tacoma 4×4 V6 Automatic Models
- Fits access cab, double cab, short bed, and long bed applications.
- TIG-welded 12-gauge SAE 304 Stainless Steel
- Theft-resistant design
- 5-lobe pin-in tamper-resistant screws & driver bit
- Washers included
- Easy bolt-on installation, no welding or drilling required
- Compatible with All-Pro skid plates and most other manufacturers’ skid plates
- Made in USA
- Installation Instructions
(7 reviews) -
AccessoriesFREE SHIPPING
within 48 US StatesZ Automotive Tazer JL Mini Programmer | Wrangler JL + Gladiator JT
- Fits All 2018-2023 Jeep Wrangler JL Models and 2018-2023 Jeep Gladiator JT Models
- Adjusts Your Jeep’s Performance After Modifications
- Features Can Be Accessed Using Dash Display, Using Steering Wheel Buttons to Navigate
- User-Friendly Design
- Two Categories of Features – Vehicle Settings and Live Functions (see full list below)
- Simple to Set Up
- Simple to adjust settings
- Covered by a 90-Day Warranty
- Some examples of features you can change:
- Adjust for gear ratio changes
- Adjust for tire size changes
- Enable/disable TPMS system if you’re running aftermarket wheels
- Enable backup camera when turn signals are activated
- Enable/disable Cargo Camera input (8.4 UConnect only)
- Optional front camera add-on for Jeep JL Wrangler and Gladiator/Wrangler 4XE/392 (Scroll down for specs)
- Installation Instructions and Manual Transmission Supplement
**Item is not returnable once opened. No electronic items sold at exitoffroad.com can be returned once opened.
(7 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US StatesToyota Tundra Overland Tailgate Table (2022-2025+)
- The stock tailgate panel is a wasted opportunity that you can easily correct with the All-Pro Off-Road Overland Tailgate Table.
- The All-Pro Off-Road Overland Tailgate Table turns your opened tailgate into a multi-functional platform for all of your overlanding, camping, fishing, and hunting needs.
- The durable food-grade polyethylene cover can be used as a cutting board while supporting your favorite camp stove.
- A slot on the left side and cup-holders on the right side prevent items from rolling away.
- Requiring only basic hand tools, reusing original hardware, and 3-minutes of time, this is one of the easiest modifications you will ever make on your truck and one every Tundra owner should do.
- Features a ruler in 1-inch (imperial) increments along the edge of the table adding convenience when measuring fish, rope, etc.
- Made in 2 different styles, choose from the divided cutting board configuration, or the smooth configuration with only round cutouts on the end.
- Thickness is right at 1/2″
- Scroll down on the page to see a full product video!!
- Made in the USA, in sunny California!!
(6 reviews) -
4Runner 4th Gen (2003-2009)FREE SHIPPING
within 48 US StatesRCI Engine Skid Plate | 03-09 4Runner GX470 FJ Cruiser
- Fits Toyota FJ Cruiser 2006-2009 models, 2003-2009 Toyota 4Runner, 2003-2009 Lexus GX470 non-KDSS models
- Includes front skid plate ONLY
- Protects front two cross-members, low hanging front differential, oil pan, transmission, second and third cross-members, exhaust cross pipe, and transfer-case
- Excellent addition or replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Built in oil drain holes allow easy access and ability to change oil without removal of plate
- Engine skid plates come standard with center mounting posts for substantially increased strength
- Engine skid plate includes differential drop cage for maximum security and ground clearance, PLUS this feature allows the use of differential drop kits without having to space the skid plate down
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat finish is standard on steel skid plates for a rust resistant, durable and high quality finish, optional on aluminum
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA
(4 reviews) -
Skid PlatesFREE SHIPPING
within 48 US StatesRCI Lexus GX460 / 5th Gen 4Runner Engine Skid Plate w/KDSS
- Fits KDSS Model 5th Gen 4Runners 2010-2024 and all GX460 models. On GX460, the oil filter access will not be used
- Includes front skid plate ONLY
- Protects front two cross-members, low hanging front differential, oil pan, transmission, second and third cross-members, exhaust cross pipe, and transfer-case
- Excellent addition or replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Built in oil drain holes allow easy access and ability to change oil without removal of plate
- Engine skid plates come standard with center mounting posts for substantially increased strength
- Engine skid plate includes differential drop cage for maximum security and ground clearance, PLUS this feature allows the use of differential drop kits without having to space the skid plate down
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat finish is standard on steel skid plates for a rust resistant, durable and high quality finish, optional on aluminum
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA
(4 reviews) -
Tundra 3rd Gen (2022-2025+)FREE SHIPPING
within 48 US StatesRCI Full Skid Package | Tundra 2022+ & Sequoia 2023+
- Suits Tundra 2022-2025+ 4×4 Models Only (not for 2WD), and 2023-2025+ Toyota Sequoia 4×4
- Choose from 10 gauge steel or 1/4″ 5052 Aluminum
- Includes front, transmission/transfer-case skid plates
- Please note that some images show our optional Cat Guards, which are NOT included with this item
- Protects power steering unit, front differential, front cross-member, engine, engine bay, and radiator
- Mounts to radiator cross-member without interfering with aftermarket bumpers, hidden winch, etc.
- Excellent replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Easy access to oil filter by removal of access door using only two bolts
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat standard on steel skid plates for a rust resistant, durable and high quality finish
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made to order
- Not compatible with 4″+ drop bracket lift kits (does work with all 1-3″ coilover lifts)
- Made in the USA.
(8 reviews) -
Sale!Rooftop Tents
Overland Vehicle Systems Mamba 3 Aluminum Hard Shell Rooftop Tent
- Aluminum Clamshell design, better aerodynamics, light for its size, excellent weather resistance, easiest to setup
- Base Material: Aircraft Grade Aluminum
- Body: Premium 600D Rip Stop Polyester Canvas Waterproof Material
- Window Screens: 120G Environmental Fadeless Breathable Gaze
- Mattress: 2” High Density Foam
- Anticondensation Mat: Yes @ ¾” Thick
- Base: 1” Aluminum Honeycomb Insulated
- Inside Storage: Oversized Storage Loft
- Base Storage: 2 Built in Storage Bags
- Closed Dimensions: 91” x 55.5” x 8”
- Open Dimensions: 91” x 55.5” x 64”
- Sleeping Area: 86” x 50”
- Sleeping Count: 2 -3
- Weight: 150 Lbs
- Hardware Included: Yes
- Storage Rack Included: Yes
- Struts: 2x Nitrogen Gas Charged Struts, 35.5” x 1” 400N
- Pull Down Strap: Ballistic Nylon
- Handles: Aircraft Grade Aluminum
- Seal: Military Specked Waterproof Grade
- Set Up: Less than a Minute, Easiest of all Roof Top Tents
- Put Away: Less than a Minute, Easiest of all Roof Top Tent
(3 reviews) -
Bags and BoxesFREE SHIPPING
within 48 US StatesOVS Rolled Socket Tool Bag – #16 Waxed Canvas
- Designed to hold 1/4 inch, 3/8 inch, and 1/2 inch Sockets
- Easily located by socket size
- Keep ratchets and sockets organized
- Socket Storage: 50 Items
- Socket Sizes: 4MM to 18MM and 5/32 to 15/16
- Designed to Hold: ¼,” 3/8”, and ½” Sockets
- Ratchet and Tool Storage: 10 Items
- Width: 20”
- Length: 18”
- Puncture Resistance: Up to 100LBS
- Water Resistance: Yes
- Breathable: Yes
(3 reviews)
