Your cart is currently empty!
RCI Off Road
Showing 31–60 of 80 resultsSorted by popularity
-
Tundra 3rd Gen (2022-2024)RCI Engine Skid Plate | Tundra 2022+ & Sequoia 2023+
- Suits 2022 Tundra (2022+) 4×4 Models Only (not for 2WD) and 2023+ Toyota Sequoia 4×4
- Choose from 10 gauge steel or 1/4″ 5052 Aluminum
- Some photos show additional transmission skid plate installed as well (sold separately)
- Protects power steering unit, front differential, front cross-member, engine, engine bay, and radiator
- Mounts to radiator cross-member without interfering with aftermarket bumpers, hidden winch, etc.
- Excellent replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Easy access to oil filter by removal of access door using only two bolts
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat standard on steel skid plates for a rust resistant, durable and high quality finish
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Weights: Steel = 45lbs. Aluminum = 30lbs
- Made to order
- Not compatible with 4″+ drop bracket lift kits (does work with all 1-3″ coilover lifts)
- Made in the USA.
(5 reviews) -
Rock SlidersRCI Tundra Rock Sliders | Tundra 2022-2023+
- Suits Toyota Tundra 2022+ Dual Cab Short Bed and Crew Max Short Bed
- Will not fit any long bed models
- Compatible with Hybrid and Gas models
- Protects rocker panels and doors
- Our sliders utilize a 2″ square main tube which is far stronger than 1.75″ round tube used by competitors
- Sliders come STANDARD with 1.75″ DOM outer rails for uncompromised strength
- Heavy duty 1/4″ thick gussets on all Five legs
- Mitered main tube ends provide a superior aesthetic appearance that matches the contours of the truck
- Full length, 3/16″ frame plate and Five leg design guarantee a slider as strong or stronger than anything on the market
- Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
- Standard 5 degree upward angle creates a low profile with maximum ground clearance
- Direct bolt on addition to existing mounting locations, no drilling required
- Available tread plate for step surface provides many benefits
- Added safety for kids and pets getting in and out of the vehicle
- Added protection to rocker panels from rocks and debris thrown from tires
- Dimpled surface gives added grip and provides structural rigidity to the slider
- Easy install with only basic hand tools
- Available with our heavy duty black textured powdercoat finish, plus we take it a step further and coat all rock sliders with an epoxy primer for an exponentially more durable finish than competitors. We now powder coat in-house allowing us to provide better quality, and shorter lead times for the same cost!
- All hardware provided (grade 5 & 8 hardware where applicable)
- Standard with RCI’s signature low profile rear kick-out
- Made to order from your selections below
- Tundra Sliders ship by Truck Freight! Additional Charge for home delivery
- MADE IN THE USA
(6 reviews) -
Skid Plates, Sliders + Racks - Tacoma 3rd Gen
RCI Tacoma Transfer Case Skid Plate
- Fits Toyota Tacoma 2005-2023
- Protects third cross-member, transfer-case, and exhaust pipe
- Excellent addition or replacement of weak, lightweight OEM skid plate that directly attaches to the transfer-case (this means impact will not disperse, rendering plate useless)
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- All models include a heavy duty 3/16″ steel cross-member- aluminum option includes a powder coated steel cross-member
- All Cross-members come powder coated black for ALL options (bare steel/aluminum and powder coat steel/aluminum)
- Direct bolt on addition to existing factory attachment points, no drilling required
- Designed around stock exhaust system
- Made in the USA
(3 reviews) -
Skid Plates, Sliders + Racks - Tacoma 3rd Gen
RCI Gas Tank Skid Plate | Tacoma 2005-2023
- Fits all Toyota Tacoma from 2005-2023
- Black powder coat available for rust resistant, durable and high quality finish
- Simple bolt on installation
- All hardware and instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling
- Smooth, flat surface that easily slides over obstacles
- Material: 3/16” Steel or 1/4” 5052 Aluminum Alloy
- Weight: 3/16” Steel- 52lbs. Aluminum- 26lbs.
- Finish: Heavy Duty Black Powder Coat or Bare Metal
- Made in the USA
(3 reviews) -
Accessories
RCI Gas Tank Skid Plate | Toyota FJ Cruiser
- Fits all years of Toyota FJ Cruiser
- Black powder coated for rust resistant, durable and high quality finish
- Simple bolt on installation
- All hardware and instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling
- Smooth, flat surfaces that easily slides over obstacles
- Works with factory fuel tank only
- Material: 10 Gauge Steel
- Weight: 30lbs
- Finish: Heavy Duty Black Powder Coat
- Made in the USA
(3 reviews) -
4Runner 4th Gen (2003-2009)
RCI 4th Gen 4Runner V8 Transmission Skid Plate
- Fits Toyota 4Runner V8 Models 2003-2009
- Protects transmission, second and third cross-members, and exhaust
- Excellent addition or replacement of weak, lightweight OEM skid plates (which do not provide any coverage over transmission)
- Service openings for maintenance without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Built in drainage holes, which also help prevent suction of skid plates in mud and snow
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA
(6 reviews) -
Bronco (2021-2024+)
RCI Bronco Gas Tank Skid Plate | Ford Bronco 4-Door 2021+
- Suits 2021+ Ford Bronco 4-Door
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Simple bolt on installation
- All hardware and instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling
(2 reviews) -
Bronco (2021-2024+)
RCI Ford Bronco Rock Sliders | 4-Door 2021-2023
- Suits 2021+ Ford Bronco 4WD 4-door models (will not fit 2-door models)
- Protects rocker panels and doors
- Frame mounted design is far stronger than body mounted sliders and disperses impacts into the truck frame rather than the sheet metal
- Full length 3/16″ frame plate and FIVE leg design guarantee a slider as strong or stronger than anything on the market
- Our sliders utilize a 2″ square main rail which is far stronger than 1.75″ round tube used by competitors
- Sliders come STANDARD with 1.75″ DOM outer rails for uncompromised strength
- Heavy duty 1/4″ thick gussets on all five legs
- More specs and details down below
- Made to order from your selections below
- Made in USA
(3 reviews) -
4Runner 3rd Gen (1996-2002)
RCI Engine Skid Plate | 96-02 4Runner 95-04 Tacoma
- Suits 3RD Gen 4Runner and 1995-2004 Tacoma Dual Cab (won’t fit regular cab)
- Protects front two cross-members, low hanging front differential, radiator, and oil pan
- Service openings for easy service and oil changes without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA.
(4 reviews) -
4Runner 5th Gen (2010-2024)
RCI Rear 4Runner Diff Skid Plate | 2010-2024 4Runner w/KDSS
- Suits Toyota 4Runner 5th Gen 2010-2024 WITH KDSS
- Look at this other skid setup for non-KDSS models if you have a regular sway bar
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/4″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- MADE IN THE USA
(3 reviews) -
GX460 (2010-2023)
RCI Lexus GX460 Transfer Case Skid Plate
- Fits USA spec Lexus GX460 V8 Models 2010-2023
- Protects third cross-member, transfer-case, and exhaust pipe
- Excellent addition or replacement of weak, lightweight OEM skid plate that directly attaches to the transfer-case (this means impact will not disperse, rendering plate useless)
- Reinforced edges between cross-members for maximum strength and rigidity
- Smooth, flat surface that easily slides over obstacles
- Heavy duty black powder coat finish is standard on steel skid plates and available on aluminum version
- Installs in minutes
- All hardware and installation instructions provided
- All models include a heavy duty 3/16″ steel cross-member- aluminum option includes a powder coated steel cross-member
- Support Cross-member comes is black powder coated steel on both steel and aluminum skid plate options
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA
(5 reviews) -
Tacoma 2nd Gen (2005-2015)
RCI Tacoma Rock Sliders | 2005-2015 Tacoma
- Protects rocker panels and doors
- Our sliders utilize a 2″ square main tube which is far stronger than 1.75″ round tube used by competitors
- 1.75″ DOM outer rails are now standard for uncompromised strength
- Heavy duty 1/4″ gussets on all legs
- 45 degree mitered main tube ends provide a superior aesthetic appearance as well as more functional design that won’t hang up
- Full length 3/16″ frame plate and FOUR leg design guarantee a slider as strong or stronger than anything on the market
- Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
- Standard 20 degree upward angle creates a low profile with maximum ground clearance
- Direct bolt on addition to existing mounting locations, no drilling required
- Easy install with only basic hand tools
- Grade 8 hardware and installation instructions provided
- Standard with our signature low profile rear kickout
- Fits 2005-2015 4wd access cab and double cab trucks
- Made to order from your selections below
- Made in USA
(4 reviews) -
Skid Plates - LC250
RCI Land Cruiser 250 Catalytic Guards | 2024-2025
- Suits Toyota Land Cruiser 250 from 2024+
- Covers open space between frame and transmission skid plate
- Compatible with both steel and aluminum RCI transmission skid plates – REQUIRED
- Powder coated with a two stage primer and textured black powder coat for an extremely durable, high quality finish
- All hardware and installation instructions provided
- Installs in minutes
- Made in the USA
- INSTALL GUIDE (Click Here)
- Recommended to run in conjunction with the Engine Skid Plate and Transmission Skid Plate
- Transmission skid plate is REQUIRED in order to run these catalytic guards
- Please note, some images show the transmission skid plate that is necessary for installing the catalytic guards however the skid plate is not included with the catalytic guards
(0 reviews) -
Skid Plates - LC250
RCI Land Cruiser 250 Transfer Case Skid Plate | 2024-2025
-
- Suits Toyota Land Cruiser 250 from 2024+ and Hybrid 2024+ Tacoma TRD Pro DCSB Iforce Max
- Protects third cross-member, transfer-case, and exhaust pipe
- Reinforced edges between cross-members for maximum strength and rigidity
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Compatible with Hybrid Model
- Made in the USA
- INSTALL GUIDE (Click Here)
- Recommended to run in conjunction with the Engine Skid Plate and Transmission Skid Plate
(0 reviews) -
-
Skid Plates - LC250
RCI Land Cruiser 250 Transmission Skid Plate | 2024-2025
-
- Suits Toyota Land Cruiser 250 from 2024+ and Hybrid 2024+ Tacoma TRD Pro DCSB Iforce Max
- Protects transmission, second and third cross-members
- Service openings for maintenance without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Compatible with Hybrid model
- Made in the USA
- INSTALL GUIDE (Click Here)
- Recommended to run in conjunction with the Engine Skid Plate
(0 reviews) -
-
Skid Plates - LC250
RCI Land Cruiser 250 Engine Skid Plate | 2024-2025
- Suits Toyota Land Cruiser 250 from 2024+
- Protects front two cross-members, low hanging front differential, and oil pan
- Service openings for easy service and oil changes without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Utilizes Center mounting points for maximum strength whether steel or aluminum
- Installs in minutes
- All hardware provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA
- INSTALL GUIDE (Click Here)
(0 reviews) -
Skid Plates
RCI Subaru Front Lip Plate | 2020-2025
- Suits US-model Subaru Outback from 2020-2025 Models
- Designed for use in combination with RCI Front skid plate (required)
- Protects center of OEM front bumper
- Smooth, flat surface that easily slides over obstacles
- Features 3/16″ 5052 Aluminum
- Black powder coat for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware is included
- Direct bolt on no drilling required
(0 reviews) -
Skid Plates
RCI Subaru Outback Transmission Skid Plate | 2020-2025
- Suits US-model Subaru Outback from 2020-2025 Models
- Protects transmission and sub-frame
- Excellent addition or replacement of weak, lightweight OEM skid plates (which do not provide full coverage over transmission)
- Service openings for maintenance without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Features steel mounting brackets for strength and durability
- Smooth, flat surface that easily slides over obstacles
- Features 3/16″ 5052 Aluminum
- Black powder coat for rust resistant, durable and high quality finish
- Utilizes manufacturer’s mounting locations for maximum strength and ease of installation
- Designed to accommodate ALL trim levels and compatible with turbo models
- Prioritizes air flow and heat dissipation for mechanical components
- Installs in minutes
- All hardware and installation instructions provided
- 16 LBS
- Installation Instructions
(0 reviews) -
Skid Plates
RCI Subaru Outback Engine Skid Plate | 2020-2025
- Suits US-model Subaru Outback from 2020-2025 Models
- Protects front two cross-members , oil pan and turbo if equipped
- Service openings for easy service and oil changes without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protection surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Features 3/16″ 5052 Aluminum
- Black powder coat for rust resistant, durable and high quality finish
- Utilizes manufacturer’s mounting locations for maximum strength and ease of installation
- Designed to accommodate ALL trim levels and compatible with turbo models
- Prioritizes air flow and heat dissipation for mechanical components
- Installs in minutes
- All hardware and installation instructions provided
- 16 LBS
- Installation Instructions
- Additional Front Lip Piece is Sold Separately!!!
(0 reviews) -
RCI Off Road
RCI Toyota Tundra Crewmax Roof Rack 2007-2021
- Suits 2007-2021 Toyota Tundra CrewMax Only
- Mount anything from lights, Hi-lift jacks, roof top tents, shower systems, Maxtrax, quick-fist, RotoPax, a spare tire, bike mounts, roof baskets, etc
- Heavy duty design will easily support roof top tents and heavy gear
- 1/4″ 5052 aluminum laser cut side panels and rear fairing. 1″x 2″ black anodized aluminum T-slot cross-bars. 1/8″ 5052 aluminum front fairing
- All aluminum components undergo a CNC deburring process to eliminate sharp edges for a high end, finished appearance
- T-Slot comes machined to accept nut plates and carriage bolts to simplify installation of accessories without ever having to remove bars
- Front wind fairing matches the contour of the roof and windshield for a superior fit and finish and improved aerodynamics
- Includes rubber trim and all necessary hardware for installation
- Our rack is features injection molded rubber mounting blocks that lift and cushion the roof rack mounting feet AND completely seal out moisture without the need for silicone!
- Built in side panel slots allow unlimited options for adding accessories such as handles, side lighting, awning mounts, and more
- Rack is only 1.75″ above highest point of the truck (not including antenna)
- Does NOT require the removal or alteration of roof antenna
- Industry standard T-slot cross-bars are compatible with hundreds of accessories
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer for an exponentially more durable finish
- Includes black stainless steel hardware, and trim. We don’t charge extra for high quality hardware
- All hardware and installation instructions provided
- On models with the shark fin antenna, the rear fairing may need to be removed and the rearmost extrusion may need to be moved to avoid the shark fin
- Weighs approximately 32lbs
- Made in the USA
- INSTALL GUIDE
(0 reviews) -
Skid Plates, Sliders + Racks - Tacoma 4th Gen
Rear Control Arm Skids | 2024+ Tacoma
- Suits 2024+ Toyota Tacoma with coil spring rear suspension
- Protects the front of the rear lower control arm links and factory link mounts on the frame
- Smooth, flat surface that easily slides over obstacles
- Black powder coat included for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Includes heavy duty hardware
- Kit includes both driver and passenger side lower link skids
- Confirmed Fitment on 24′ TRD OR only should fit all Tacoma models with rear coil suspension
- Made in USA
- Installation Instructions
(0 reviews) -
RCI Off Road
RCI Rear Tacoma Diff Skid Plate | Non-Hybrid | 2024+ Tacoma
- Suits Toyota Tacoma 2024+ Non-Hybrid
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/4″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- MADE IN THE USA
(0 reviews) -
Skid Plates
Rear Shock Mount Skids | 2005-2023 Tacoma
- Includes one pair of shock mount skid plates (Driver/Passenger)
- Protects low hanging shock mounts on 2005-2023 Toyota Tacoma models
- Includes all hardware for installation
- Product includes a heavy duty black powder coat finish
- Made of 3/16″ Steel
- Fits OEM, Icon, Fox, King, Eibach, Bilstein and many others
- DOES NOT FIT ICON RXT REAR SHOCKS WITH SIDE-MOUNTED EYELET
- Made in Colorado, USA
(6 reviews) -
Skid Plates
Rear Shock Mount Skids | 2024+ Tacoma
- Includes one pair of shock mount skid plates (Driver/Passenger)
- Protects low hanging shock mounts on 2024 Tacoma models
- Includes all hardware for installation
- Product includes a heavy duty black powder coat finish
- Made of 3/16″ Steel
- Compatibility confirmed with TRD-Offroad OEM Bilstein shocks and King aftermarket stocks. Designed for compatibility with all OEM shock options (Trailhunter OEM OME shocks, TRD PRO OEM FOX, shocks, Prerunner OEM Tokicos shocks, TRD Sport OEM shocks
- Made in USA
(2 reviews) -
Tacoma 4th Gen (2024+)
RCI Aluminum Tacoma Roof Rack | 2024+ Tacoma
- RCI 4th Gen Toyota Tacoma Aluminum Roof Rack – suits 2024+ DUAL CAB models
- Only suits the dual cab models, will not suit access cabs
- Mount anything from lights, Hi-lift jacks, roof top tents, shower systems, Maxtrax, quick-fist, RotoPax, a spare tire, bike mounts, roof baskets, etc
- Heavy duty design will easily support roof top tents and heavy gear
- 1/4″ 5052 aluminum laser cut side panels and rear fairing. 1″x 2″ black anodized aluminum T-slot cross-bars. 1/8″ 5052 aluminum front fairing
- All aluminum components undergo a CNC deburring process to eliminate sharp edges for a high end, finished appearance
- T-Slot comes machined to accept nut plates and carriage bolts to simplify installation of accessories without ever having to remove bars
- Front wind fairing matches the contour of the roof and windshield for a superior fit and finish and improved aerodynamics
- Includes rubber trim and all necessary hardware for installation
- Our rack is features injection molded rubber mounting blocks that lift and cushion the roof rack mounting feet AND completely seal out moisture without the need for silicone!
- Built in side panel slots allow unlimited options for adding accessories such as handles, side lighting, awning mounts, and more
- Entirely bolt on design utilizes existing roof rack mounting holes
- Rack is only 1.75″ above highest point of the truck (not including antenna)
- Does NOT require the removal or alteration of roof antenna
- Industry standard T-slot cross-bars are compatible with hundreds of accessories
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer for an exponentially more durable finish
- Includes black stainless steel hardware, and trim. We don’t charge extra for high quality hardware
- Easy bolt together assembly, takes about 45 minutes to install
- All hardware and installation instructions provided
- Weighs approximately 39lbs
- Installation Guide
- Made in the USA
(0 reviews) -
Tacoma 4th Gen (2024+)
Toyota Tacoma Bed Stiffener Kit | 2024+ Tacoma
- Suits 2024+ Toyota Tacoma, any bed length
- Essential if running a cap, canopy or camper so that the bed flex doesn’t destroy the mounting points of those
- Stiffens bed sides and makes them more rigid
- Adds strength to the bed of the Tacoma and prevents the bed from bowing outwards
- Compatible with OEM bed mat
- Ideal for trucks with bed racks, toppers, RTT, and other heavy accessories
- Can be installed on both 5′ and 6′ bed lengths
- Features a bottle opener and additional tie down points
- Mounting locations for antennas, whips, or safety flags
- Installs in minutes
- Requires drilling for installation
- Powder coated with a two stage primer and textured black powder coat for an extremely durable, high quality finish
- All hardware and installation instructions provided
- Installation Instructions
- Made in Loveland, Colorado, USA!!
(0 reviews) -
Tacoma 4th Gen (2024+)
2024+ Tacoma Transfer Case Skid Plate from RCI
- For 2024+ Toyota Tacoma 4th Gen
- Protects third cross-member, transfer-case, and exhaust pipe
- Reinforced edges between cross-members for maximum strength and rigidity
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- All models include a heavy duty 3/16″ steel powder coated cross-member- aluminum option includes a powder coated steel cross-member
- Weights: 3/16″ Steel 24 LBS, 1/4″ Aluminum 12 LBS, Crossmember 15 LBS
- Verified to fit 4×4 TRD Offroad non-hybrid models. Suspected to fit other models, but not yet verified
- MADE IN LOVELAND, COLORADO, USA
(0 reviews) -
Tacoma 4th Gen (2024+)
2024+ Tacoma Transmission Skid Plate from RCI
- For 2024+ Toyota Tacoma 4th Gen
- Protects transmission, second and third cross-members
- Service openings for maintenance without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Weights: 3/16″ Steel 38 LBS, 1/4″ Aluminum 17 LBS
- Direct bolt on addition to existing factory attachment points, no drilling required
- Verified to fit 4×4 TRD Offroad non-hybrid models. Suspected to fit other models, but not yet verified
- MADE IN LOVELAND, COLORADO, USA
(0 reviews) -
Tacoma 4th Gen (2024+)
2024+ Tacoma Engine Skid Plate from RCI
- For 2024+ Toyota Tacoma 4th Gen
- Protects front two cross-members, low hanging front differential, and oil pan
- Service openings for easy service and oil changes without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Utilizes Center mounting points for maximum strength whether steel or aluminum
- Installs in minutes
- All hardware provided
- Weights: 3/16″ Steel 51 LBS, 1/4″ Aluminum 21 LBS
- Direct bolt on addition to existing factory attachment points, no drilling required
- Engine Skidplate requires the front crossmember below the radiator
- Verified to fit 4×4 TRD Offroad and TRD Pro Models
- If mounting to a Tacoma with out the factory front crossmember like TRD Sport, Limited or SR5 etc. you must add the additional Tacoma Front Skidplate Crossmember
- MADE IN LOVELAND, COLORADO, USA
(0 reviews) -
Roof Racks
RCI Low-Pro Truck Bed Bars
- Super low profile (low pro) bed rack set to mount all sort of gear or a Roof Top Tent
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier, Ford Ranger, Chevy Colorado, GMC Canyon, Ford F150, Toyota Tundra, etc
- Utilizing 2 crossmembers spanning the truck bed, these bed bars have a high weight capacity and provide even weight distribution on the trucks bed side rails
- Bolts to inside of bed rails or can alternatively be mounted with optional “drill-free” clamps to mount like a truck topper (Not applicable when bolting to accessory rail systems)
- Bars are 3.5″ tall from bed rail to top of bars
- Adjustable width adapts to any truck bed from 54″- 69″ width between the bed rails
- Can be positioned up to 58″ apart (front to back)
- Using these bars will minimize the aerodynamic drag normally associated with roof top tents by keeping it below the roof-line
- Slotted mounting points on top of rack accept nearly any roof top tent making mounting a breeze
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer. This extra step is expensive and time consuming but ensures our paint job will outlast anything else in the industry!
- Easy bolt together assembly, takes about 15 minutes to install with only a few basic hand tools
- All hardware for installation is included
- INSTALL GUIDE
- Made in Loveland, Colorado USA
(5 reviews)
