Your cart is currently empty!
RCI Off Road
Showing 61–80 of 80 resultsSorted by popularity
-
Roof RacksRCI 18″ HD Truck Bed Rack
- For Short Bed Trucks from 46-58″ in Bed Length
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier, Ford Ranger, Chevy Colorado, GMC Canyon, Ford F150, Toyota Tundra, etc
- Mount anything from lights, Hi-lift, CO2 tank, fire extinguisher, quick-fist, roto-pax, spare tire, roof top tent, bike mounts, roof baskets, etc
- This is our HD model, utilizing three cross-members spanning the truck bed, this rack is has the highest weight capacity and provides even weight distribution on the trucks bed side rails
- Built in mounting points allow unlimited options for adding accessories
- Bolts to inside of bed rails or can alternatively be mounted with optional “drill-free” clamps *Many Toyota and Jeep models can be bolted directly to accessory bed rails
- Rack is 18″ tall from bed rail to top of rack
- Maintains complete visibility through the back window of most trucks due to its added height
- Slotted mounting points on top of rack accept nearly any roof top tent, allowing tent to be bolted on in a matter of minutes
- Adjustable width adapts to any truck bed from 56.5″ – 64″ width between the bed rails
- Tall enough to fit up to a 35″ spare tire in the bed of a Tacoma, with even more room on full size pickups
- Includes TWO top braces for unlimited accessory and tent mounting options
- Heavy duty black textured powdercoat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer for an exponentially more durable finish
- Easy bolt together assembly, takes about 45 minutes to install
- All hardware and installation instructions provided
- Adjustable Bedrack Install Guide
- Made in Loveland, Colorado USA
(4 reviews) -
Roof RacksRCI 12″ High HD Aluminum Truck Bed Rack
- For Short Bed Trucks from 46-58″ in Bed Length
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier, Ford Ranger, Chevy Colorado, GMC Canyon, Ford F150, Toyota Tundra, etc
- Rack is 12″ tall from bed rail to top of rack
- Low Profile design keeps a roof top tent lower than the roof line for better aerodynamics
- Weighs only 68 lbs compared to the steel version at 95lbs
- Built with .190″ heavy duty aluminum and 14ga steel telescoping top braces
- Mount anything from lights, Hi-lift, CO2 tank, fire extinguisher, quick-fist, roto-pax, spare tire, roof top tent, etc
- This is our HD model, utilizing three cross-members spanning the truck bed, this rack is has the highest weight capacity and provides even weight distribution on the trucks bed side rails
- Built in mounting points allow unlimited options for adding accessories
- Bolts to inside of bed rails or can alternatively be mounted with optional “drill-free” clamps
- Adjustable width adapts to any truck bed from 54″ – 64″ width between the bed rails
- Maintains very good visibility through the back window despite the low overall rack height
- Using this rack will minimize the aerodynamic drag normally associated with roof top tents by keeping it largely below the roof-line
- Slotted mounting points on top of rack accept nearly any roof top tent making mounting a breeze
- Includes TWO top braces for unlimited accessory and tent mounting options
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer for an exponentially more durable finish
- Easy bolt together assembly, takes about 45 minutes to install
- All hardware for installation is included
- Adjustable Bedrack Install Guide
- Made in Loveland, Colorado USA
(6 reviews) -
RCI Off Road
RCI Rear Tacoma Diff Skid Plate | TRD Sport / SR5 2016-2023
- Suits Toyota Tacoma 2016-2023 TRD Sport and SR5
- **This listing is for the 16-Present TRD SPORT / SR5 model Tacoma’s only, which has oil drain plug on the driver’s side. If your drain plug is on the driver’s side this is the correct part for your truck (photo doesn’t show actual product)*
- Tacoma’s with a passenger side drain plug, GO HERE
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/4″ for minimal loss in ground clearance
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- MADE IN THE USA
(6 reviews) -
RCI Off Road
RCI Rear Tacoma Diff Skid Plate | TRD Offroad / Pro 2016-2023
- Suits Toyota Tacoma 2016-2023 TRD Pro and TRD Offroad
- **This listing is for the 16-Present TRD OFFROAD/PRO model Tacoma’s only, which has oil drain plug on the passenger side. If your drain plug is on the passenger side this is the correct part for your truck*
- If you have a driver’s side drain plug, GO HERE
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/4″ for minimal loss in ground clearance
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- MADE IN THE USA
(3 reviews) -
4Runner 3rd Gen (1996-2002)
RCI Transfer Case Skid Plate | 1996-2002 4Runner
- Suits 3RD Gen Toyota 4Runner 1996-2002
- Protects third cross-member, transfer-case, and exhaust pipe
- Photos show this skid as well as others installed
- Built with 3/16″ CNC laser cut steel
- Excellent addition or replacement of weak, lightweight OEM skid plate that directly attaches to the transfer-case (this means impact will not disperse, rendering plate useless)
- Reinforced edges between cross-members for maximum strength and rigidity
- Utilizes carriage bolts for mounting, providing a low profile without the worry of damaging hardware
- Smooth, flat surface that easily slides over obstacles
- Black powder coated for rust resistant, durable and high quality finish
- Installs in minutes
- Hardware and installation instructions included
- Direct bolt on addition to existing factory attachment points, no drilling required
- Also works in conjunction with the RCI Engine and Transmission Skid Plates
- Made in the USA.
(3 reviews) -
4Runner 3rd Gen (1996-2002)
RCI A-Arm Skid Plates | 96-02 4Runner 95-04 Tacoma
- Suits 3RD Gen 4Runner and 1995-2004 Tacoma
- Protects A-arms
- Built of 3/16” CNC laser cut steel
- Smooth, flat surface that easily slides over obstacles
- Black powder coated for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Not compatible with OEM front skid plate (without cutting OEM plate)
- Sold as a pair
- Made in the USA.
(5 reviews) -
Tundra 2nd Gen (2007-2021)
RCI Rear Diff Skid Plate | 07-21 Tundra
- Suits 2nd Gen Tundra (2007-2021)
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/8″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA.
(6 reviews) -
Tundra 2nd Gen (2007-2021)
RCI A-Arm Skid Plates | 07-21 Tundra & 08-22 Sequoia
- Suits 2nd Gen Tundra (2007-2021) and Sequoia (2008-2022)
- Protects A-arms (front lower control arms)
- Sold as a pair
- Built with CNC laser cut 1/4″ aluminum
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA.
(3 reviews) -
Tundra 3rd Gen (2022-2024)
RCI 2023+ Sequoia & 2022+ Tundra A-Arm Skid Plates
- Suits 2022 Tundra (2022+) 4×4 Models Only (not for 2WD) and 2023+ Toyota Sequoia
- Protects A-arms (front lower control arms)
- Compatible with TRD engine skid plate
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in USA
(2 reviews) -
Tundra 3rd Gen (2022-2024)
RCI 2022+ Tundra & 2023+ Sequoia Hybrid Rear Diff Skid Plate
- Suits 2022 Tundra (2022+) 4×4 Models Only (not for 2WD) and 2023+ Toyota Sequoia – HYBRID MODELS ONLY
- The Hybrid model is slightly different in fitment than the regular models
-
**NOT COMPATIBLE ON STANDARD NON-HYBRID MODELS – SEE THAT SPECIFIC LISTING
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/8″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in USA
(2 reviews) -
Tundra 3rd Gen (2022-2024)
RCI 2022+ Toyota Tundra Rear Diff Skid Plate
- Suits 2022 Tundra (2022+) 4×4 Models Only (not for 2WD)
-
**NOT COMPATIBLE ON HYBRID MODELS – SEE HYBRID SPECIFIC LISTING
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/8″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in USA
(2 reviews) -
Tundra 3rd Gen (2022-2024)
RCI 2022+ Toyota Tundra Fuel Tank Skid Plate (32gal)
- Suits 2022 Tundra (2022+) 4×4 Models Only (not for 2WD)
- Protects the vulnerable fuel tank from accidental puncture
- Compatible with nearly all 4×4 trucks from 22-Present (skid is NOT compatible with 8 foot bed models). Requires Toyota rear fuel tank support strap from off-road model to bolt on skid plate
- Same mounting locations as factory skid plate but substantially sturdier metal construction
- Smooth, flat surface that easily slides over obstacles. No exposed bolt heads on skid plates on 26gal fuel skid plate
- 32 gal fuel tank skid plate incorporates welded bolt protection rings standard
- Direct bolt on addition, no drilling
- 12ga Steel Construction, weight is 49 LBS
- Includes heavy duty black powder coating for rust resistant, durable and high quality finish
- Installs in minutes
- All mounting hardware provided
- **PLEASE NOTE, VEHICLES WITHOUT OEM FUEL TANK SKID PLATE WILL NEED STUDDED TOYOTA FUEL TANK STRAPS TO INSTALL**
(6 reviews) -
Bumpers + Roof Racks - 5th Gen 4Runner
RCI 4Runner Pike Front Bumper for 2014-2024 4Runner
- Suits 2014-2024 Toyota 4Runner 5th Gen (won’t fit Limited or TRD Sport Models)
- Seamlessly matches the contours of the truck for a sleek fit and finish
- Features single row light bar compatibility with most 30″ light bars.
- Tall hoop and no hoop are compatible with adaptive cruise control (Low Hoop is not compatible with ACC)
- Built in winch mounting plate is tied directly to the frame of the truck and accommodates up to 10,000lb winches. (Designed for Warn, SuperWinch and many other winch models on the market)
- Fully gusseted frame mounts and sub structure
- Includes additional support brackets tying the bumper mounting surface to the frame and offering support for the plastic bumper once cut
- 3/4″ shackle mounts run through the bumper shell and are welded directly to frame mounts as well as shell.
- Bolt on addition to existing factory attachment points, no drilling or welding but does require trimming of the OEM plastic bumper
- Heavy duty satin black powder coat option with epoxy primer base coat for excellent durability and lasting good looks
- Material: 3/16″ Steel
- Weight: 80lbs No Hoop, 86lbs Low Hoop, 89lbs Tall Hoop
- Built in Loveland, Colorado, USA
- Built to order based on your preferences chosen
(6 reviews) -
Skid Plates, Sliders + Racks - Tacoma 2nd Gen
RCI Rear Tacoma Diff Skid Plate 2005-2015
- Suits Toyota Tacoma 2005-2015
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/4″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- MADE IN THE USA
(3 reviews) -
Skid Plates
RCI Catalytic Guards | 2005-2023 Tacoma
- REQUIRES RCI TRANSMISSION SKID PLATE FOR INSTALLATION
- Fits: 2005-2023 Toyota Tacoma
- *Fits 4×4 4.0L/3.5L Access Cab and Double Cab trucks only
- Protects exposed catalytic converters from on and off road debris
- Excellent addition to the RCI Transmission skid to aid in preventing catalytic converter thefts
- Vented design for adequate airflow and heat dissipation
- Smooth, flat surface that easily slides over obstacles
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing RCI Transmission skid, drilling may be required until manufacturing begins on pre cut out holes on Transmission skid plate
- Designed around the most current RCI transmission skid plate with 2in double bent side flange
- Requires RCI Transmission Skid Plate for installation
(5 reviews) -
Late FJ Cruiser (2010-2016)
RCI 2010+ FJ Cruiser Engine Skid Plate
- Fits Toyota FJ Cruiser 2010-2017 models
- Includes front skid plate ONLY
- Protects front two cross-members, low hanging front differential, oil pan, transmission, second and third cross-members, exhaust cross pipe, and transfer-case
- Excellent addition or replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Built in oil drain holes allow easy access and ability to change oil without removal of plate
- Engine skid plates come standard with center mounting posts for substantially increased strength
- Engine skid plate includes differential drop cage for maximum security and ground clearance, PLUS this feature allows the use of differential drop kits without having to space the skid plate down
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat finish is standard on steel skid plates for a rust resistant, durable and high quality finish, optional on aluminum
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA
(3 reviews) -
4Runner 4th Gen (2003-2009)
RCI 4th and 5th Gen 4Runner + FJ Cruiser V6 Transmission Skid Plate
- Fits Toyota 4Runner V6 Models 2003-2009 and 2010-2024, and FJ Cruiser (all years)
- Protects transmission, second and third cross-members, and exhaust
- Excellent addition or replacement of weak, lightweight OEM skid plates (which do not provide any coverage over transmission)
- Service openings for maintenance without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Built in drainage holes, which also help prevent suction of skid plates in mud and snow
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA
(3 reviews) -
Bronco (2021-2024+)
RCI Rear Bronco Diff Skid Plate | 2021+ Ford Bronco
- Suits 2021+ Ford Bronco
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/4″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- MADE IN THE USA
(5 reviews) -
Bronco (2021-2024+)
RCI Full Skid Plate Package | 2021+ Ford Bronco 2/4 Door
- Suits 2021+ Ford Bronco 2 door and 4 door models – Does not suit Bronco Sport models
- Includes engine (two piece), transmission and transfer-case skid plates.
- Protects expensive EPAS power steering unit, front differential, front cross-member, engine, engine bay, intercooler, sway bar disconnect (if applicable),, transmission, exhaust, oil pan, transfer-case, and more!
- Compatible with 4×4 and Raptor models
- Simple installation and removal of all subsections for maintenance
- Extremely high clearance hugs the truck very tight and does not sacrifice ground clearance for protection
- Smooth, flat surface that easily slides over obstacles
- Steel version-black epoxy powder coated for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- *May Not be Compatible with all 4+” Lift Kits (drop bracket kits)
- Made in the USA
(9 reviews) -
Accessories
RCI Tacoma Aluminum Roof Rack | 2005-2023 Tacoma
- RCI 2nd and 3rd Gen Toyota Tacoma Aluminum Roof Rack – suits 2005-2023 DUAL CAB models
- Only suits the dual cab models, will not suit access cabs
- Mount anything from lights, Hi-lift jacks, roof top tents, shower systems, Maxtrax, quick-fist, roto-pax, spare tire, bike mounts, roof baskets, etc
- Heavy duty design will easily support roof top tents and heavy gear
- 1/4″ 5052 aluminum laser cut side panels and rear fairing, 1″x 2″ black anodized T-slot cross-bars, 1/8″ 5052 front fairing
- T-Slot comes machined to accept nut plates and carriage bolts to simplify installation of accessories without ever having to remove bars
- Front wind fairing matches the contour of the roof and windshield for a superior fit and finish and improved aerodynamics
- Includes rubber trim and all necessary hardware for installation
- Our rack is the only one on the market that utilizes injection molded / CNC cut rubber mounting blocks that lift and cushion the roof rack mounting feet AND completely seal out moisture without the need for silicone!
- Built in side panel slots allow unlimited options for adding accessories such as handles, side lighting, awning mounts, and more
- Entirely bolt on design utilizes existing roof rack mounting holes
- Rack is only 1.75″ above highest point of the truck (not including antenna)
- Does NOT require the removal or alteration of roof antenna
- Industry standard T-slot cross-bars are compatible with hundreds of accessories
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer for an exponentially more durable finish
- Includes black stainless steel hardware, and trim. We don’t charge extra for high quality hardware
- Easy bolt together assembly, takes about 45 minutes to install
- All hardware and installation instructions provided
- Weighs approximately 32lbs
- Installation Instructions
- Made in the USA
(8 reviews)
