IMS Monotube

Showing 61–90 of 96 resultsSorted by popularity

Hilux Rogue GR Sport Wide Track (2022+)
FREE SHIPPING
within 48 US States
Dobinsons IMS59-50460 Front 2.2″ IFP Struts | Hilux Rogue GR Sport
- Suits 2022-2025+ Toyota Hilux Rogue and GR Sport Wide Track Models (not sold in the USA)
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Height adjustable with a fully threaded body
- Suits any lift height from 0-3″
- Use with Dobinsons C59-302 or C59-314 coils to add lift
- These do not come set to any specific preload height
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height – set to 250mm
- Photos for illustration purposes
(0 reviews)
$700.00 Add to cart
Exceptions
FREE SHIPPING
within 48 US States
Dobinsons IMS43-50785 2.2″ Monotube Rear Shocks Pair
- Dobinsons IMS43-50785 Rear Shocks Suits the following vehicles:
  
  Mitsubishi Montero Sport (Challenger, Nativa) 2000 to 2007
  
  Mitsubishi Pajero Sport (Challenger, Nativa) 2008 to 2015
  
  Mitsubishi Pajero Sport (Challenger, Nativa) 2016+
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Watch the video on IMS here: https://youtu.be/Npfx40VD3kM
- Photo for illustration purposes
Rated 5.00 out of 5
(4 reviews)
$600.00 Add to cart
Triton L200 2015-2023
FREE SHIPPING
within 48 US States
Dobinsons IMS43-50801 2.2″ Monotube Shocks Pair | Mitsubishi Triton
- Dobinsons IMS43-50801 rear shocks for Mitsubishi Triton L200 2006-2023
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Watch the video on IMS here: https://youtu.be/Npfx40VD3kM
- Photo for illustration purposes
Rated 5.00 out of 5
(5 reviews)
$600.00 Add to cart
On Backorder
Triton L200 2015-2023
FREE SHIPPING
within 48 US States
Dobinsons IMS43-50800 2.2″ Monotube Struts Pair | Mitsubishi
- Suits Mitsubishi Triton L200 2006-2023, Pajero Sport (Challenger) 2008-2016 and Pajero Sport (Challenger) 2016+
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Adjustable height through fully threaded body
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height – should be set to 215mm
- Watch the video on IMS here: https://youtu.be/Npfx40VD3kM
- Photo for illustration purposes
Rated 5.00 out of 5
(5 reviews)
$700.00 Add to cart
Ranger PX (2012-2018) - Intl Model
FREE SHIPPING
within 48 US States
Dobinsons IMS19-50092 IMS Monotube 2.2″ IFP Front Struts Pair
- IMS front struts for 0-3.0″ of lift for Ford Ranger PX1 and PX2 International Model 2011-2018 and Mazda BT-50 2011-2020 (not for USA trucks)
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height is 190mm. See instructions on setting coil seat height on left
- New strut top mounts
- Can reuse OE coils and add lift via preload or add Dobinsons Front Coils
Rated 5.00 out of 5
(7 reviews)
$700.00 Add to cart
Ranger PX3 (2018-2022) - Intl Model
FREE SHIPPING
within 48 US States
Dobinsons IMS19-50081T IMS Monotube 2.2″ IFP Rear Shocks Pair
- IMS rear shocks for 0-2.5″ of lift for Ford Ranger PX2 and PX3 2011-2022 (International Models, not for USA trucks) and Mazda BT-50 2011-2020
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(5 reviews)
$600.00 Add to cart
Ranger PX3 (2018-2022) - Intl Model
FREE SHIPPING
within 48 US States
Dobinsons IMS19-50094 IMS Monotube 2.2″ IFP Front Struts Pair
- IMS front struts for 0-3.0″ of lift for Ford Ranger PX3 2018-2022 (International Models, not for USA trucks)
- SOLD IN PAIRS
- Note: Photo is not of actual IMS struts. Ford Ranger IMS have a crossbar style lower front shock bush
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height is 167mm. See instructions on setting coil seat height on left
- Reuse OE strut top mount
- Can reuse OE coils and add lift via preload or add Dobinsons Front Coils
- NOTE: Dobinsons Front Sway Bar Link Kit must be purchased to run Dobinsons IMS struts
Rated 5.00 out of 5
(8 reviews)
$700.00 Add to cart
Exceptions
FREE SHIPPING
within 48 US States
Dobinsons IMS43-50081B 2.2″ Monotube Shocks Pair
- Suits Isuzu D-Max 2020-2024, and Mazda BT-50 2020-2024+, Mitsubishi Triton & L200 1987-2006, Nissan D23 NP300 2014-2021.
- 2020+ D-Max and BT-50 must run rear brake line extensions WA21-584K with these shocks
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Watch the video on IMS here: https://youtu.be/Npfx40VD3kM
- Photo for illustration purposes
Rated 5.00 out of 5
(4 reviews)
$600.00 Add to cart
Exceptions
FREE SHIPPING
within 48 US States
Dobinsons IMS21-50472 2.2″ Monotube Extended Travel Struts Pair
- Suits Isuzu D-Max 2012-2020 and D-Max 2020-2024+, and Mazda BT-50 2020-2024+
- For 3.0″ of lift
- Requires UCA ball joint spacer kit and a diff drop kit for proper movement and travel
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Adjustable height through fully threaded body
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height – should be set to 195mm
- Watch the video on IMS here: https://youtu.be/Npfx40VD3kM
- Photo for illustration purposes
Rated 5.00 out of 5
(7 reviews)
$700.00 Add to cart
Exceptions
FREE SHIPPING
within 48 US States
Dobinsons IMS21-50471 2.2″ Monotube Shocks Pair | Isuzu D-Max Mazda BT-50
- Suits Isuzu D-Max 2012-2020 and D-Max 2020-2024+, and Mazda BT-50 2020-2024+
- For 0-2″ of lift
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Watch the video on IMS here: https://youtu.be/Npfx40VD3kM
- Photo for illustration purposes
- Link to matching Front Struts
Rated 5.00 out of 5
(6 reviews)
$600.00 Add to cart
Exceptions
FREE SHIPPING
within 48 US States
Dobinsons IMS21-50470 2.2″ Monotube Struts Pair | Isuzu D-Max Mazda BT-50
- Suits Isuzu D-Max 2012-2020 and D-Max 2020-2024+, and Mazda BT-50 2020-2024+
- For 0-2″ of lift
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Adjustable height through fully threaded body
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height – should be set to 190mm
- Watch the video on IMS here: https://youtu.be/Npfx40VD3kM
- Photo for illustration purposes
Rated 5.00 out of 5
(4 reviews)
$700.00 Add to cart
Ineos Grenadier
FREE SHIPPING
within 48 US States
Dobinsons IMS51-60270 2.6″ Monotube IFP Shocks Pair – Ineos Grenadier
- Suits Ineos Grenadier 2023-2025+ Front and Rear (this SUV uses the same shocks front and rear)
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
- SOLD IN PAIRS
- Photo for illustration purposes
- Note: These shocks should be run with Dobinsons front sway bar extensions and front and rear brake line extension kits to prevent any binding or damage
(0 reviews)
$700.00 Add to cart
Apache Offroad
FREE SHIPPING
within 48 US States
Apache Offroad AX2 IFP Rear Shocks Pair | 2005-2023 Tacoma 00-06 Tundra
- Suits Toyota Tacoma 2nd and 3rd Gen, 2005-2023, and Toyota Tundra 1st Gen 2000-2006
- Suits 0-3″ of lift
- Direct Bolt on Installation
- Includes upper bushings and washers, and lower bushings already pressed in
- Includes shock boots to protect the shock shaft
- Proprietary high-Zinc content paint coating for superior protection against rock chips and abrasion damage
- Nitrogen Charged Monotube Design
- Internal Floating Piston- Separates the oil and nitrogen to prevent shock fade
- Fully rebuildable and revalveable
- Linear Valving
- Hardened Chrome Piston shaft- resists rock damage and corrosion
- Precision Japanese CNC machined, High Flow Piston
- Heavy Duty Ultra Low Friction Japanese 3 Stage Seal System
- High Quality German Oil
- Heavy Duty Lower Leg
- Hardened Rubber Lower Bushing provides a long and quiet life
- Heavy Duty 1/8″ (3mm) DOM wall thickness
- 2 Year Warranty
- 379mm Compressed, 614mm Extended
- SOLD IN PAIRS – Includes new washers and bushings for the top, and lower bushings are pressed in
Rated 5.00 out of 5
(10 reviews)
$470.00 Add to cart
Apache Offroad
FREE SHIPPING
within 48 US States
Apache Offroad AX2 IFP Struts Pair | 03-09 4Runner, 06-09 FJ, 05-23 Tacoma, GX470
- Suits 2nd and 3rd Gen Tacoma 2005-2023, 4th Gen 4Runner 2003-2009, Early FJ Cruiser 2006-2009, Lexus GX470 2003-2009, suitable for 0 – 3.5″ of lift
- 3 Spring seat settings: OEM height 0″ (213mm), +1″ (226mm), and +1.5″ (231mm)
- Use with OEM coils for a mild lift by preloading, or run lifted coils like Dobinsons
- Direct Bolt on Installation
- Proprietary high-Zinc content paint coating for superior protection against rock chips and abrasion damage
- Nitrogen Charged Monotube 2.2″ Body Design
- Internal Floating Piston- Separates the oil and nitrogen to prevent shock fade
- Fully rebuildable and revalvable
- Linear Valving
- Hardened Chrome Piston shaft- resists rock damage and corrosion
- Precision Japanese CNC machined, High Flow 50mm Piston
- Heavy Duty Ultra Low Friction Japanese 3 Stage Seal System
- High Quality German Oil
- Heavy Duty Lower Leg
- Hardened Rubber Lower Bushing provides a long an quiet life
- T6 6061 Aluminum Spring Seat
- Heavy Duty Spring Seat Circlip
- Heavy Duty 1/8″ (3mm) DOM wall thickness
- Down travel Spacer (under top hat spacer shaft spacer/extender) to provide adequate down travel for lift heights of 3-3.5″- Eliminates the need to rebuy extended travel struts when making changes to taller lift heights. Ideal for those who change their lift height overtime. Works by extending the point at which the upper washer sits on the shaft, thus raising the mounting position of the top hat and increasing down travel. Use for lifts 3-3.5″
- Works from 0-3.5″ of lift
- 2 Year Manufacturer’s Warranty
- No set rebuild periods
- 430mm Compressed, 570 mm Extended without DT Spacer, 575mm Extended with DT Spacer
- SOLD IN PAIRS – Includes new washers and bushings for the top, and lower bushings are pressed in
Rated 5.00 out of 5
(10 reviews)
$525.00 Add to cart
Silverado 1500 (2019-2024)
FREE SHIPPING
within 48 US States
Dobinsons IMS09-60178 2.6″ IFP Front Struts Pair | Chevy Silverado 1500 2019+
- Suits Chevy Silverado 1500 and GMC Sierra 1500 2019-2024
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Features clip adjustment levels for fine tuning of lift height
- Recommended to run with Dobinsons coils
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 524mm extended, 385mm compressed lengths (included a droop spacer to be used below top washer for extra travel)
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height is 231mm (9.07″)
- Photos for illustration purposes
(0 reviews)
$800.00 Add to cart
On Backorder
Tacoma 4th Gen (2024-2025+)
FREE SHIPPING
within 48 US States
Dobinsons IMS59-60490 2.6″ IFP Front Struts Pair | 2024+ Toyota Tacoma
- Suits Toyota Tacoma 2024+
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 22mm / 7/8″ shaft diameter on front struts
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height should be set to 251mm (9.9″)from the center of the lower hole to the base notch where the coil sits
- SOLD IN PAIRS
- New Dobinsons Strut Mounts should be run with these for strength and longevity
(0 reviews)
$800.00 Add to cart
Struts + Shocks - Tundra 2022+
FREE SHIPPING
within 48 US States
Dobinsons IMS Shock Kit for Toyota Tundra 2022-2025
- Dobinsons IMS Monotube Strut and Shock Absorber Kit – Front and Rear
- Suits 2022-2025+ Toyota Tundra
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Height Adjustable: Yes, fronts
- Suits 0-3″ front lift and 1-3″ rear lift
- Reservoir: Internal
- Finish: Corrosion resistant (EDP Surface Protection)
- Body Design: 66mm (2.6″) OD
- Rod: Double Chrome 22mm front, 18mm rear
- Piston: Race inspired hi-flow CNC 6061 Billet alloy
- Oil: High Quality Fuch’s Oil from Germany
- Seals: Heavy Duty 3 Stage FKM HNBR Sealing System
- Rings: Teflon Piston Rings
- Bushings: Natural Rubber
- Internal Design: IFP (Internal Floating Piston) Monotube
- Boot Included: Yes
- Bushings Included: Yes, top and bottom, front and rear
- IMS59-60446 specs – 540mm extended, 390mm compressed
- IMS59-60887 and IMS59-60687 specs – 680mm extended, 421mm compressed
- Reuse original coil springs or buy new Dobinsons springs
- Not suitable with TRD Pro coil springs
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
Rated 5.00 out of 5
(13 reviews)
From $1,500.00 Select options
Shocks + Struts - 5th Gen 4Runner
FREE SHIPPING
within 48 US States
Dobinsons IMS Shock Kit for 5th Gen Toyota 4Runner 2010-2024
- Dobinsons IMS Monotube Strut and Shock Absorber Kit – Front and Rear
- Suits 2010-2024 Toyota 4Runner 5th Gen
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Height Adjustable: Yes, fronts
- Reservoir: Internal
- Finish: Corrosion resistant (EDP Surface Protection)
- Body Design: 56mm OD
- Rod: Double Chrome 18mm
- Piston: Race inspired hi-flow CNC 6061 Billet alloy
- Oil: High Quality Fuch’s Oil from Germany
- Seals: Heavy Duty 3 Stage FKM HNBR Sealing System
- Rings: Teflon Piston Rings
- Bushings: Natural Rubber
- Internal Design: IFP (Internal Floating Piston) Monotube
- Boot Included: Yes
- Bushings Included: Yes, top and bottom, front and rear
- IMS59-50700 specs – 560mm extended, 420mm compressed
- IMS59-50701 specs – 598mm extended, 389mm compressed
- Reuse original coil springs or buy new Dobinsons springs
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(13 reviews)
From $1,300.00 Select options
Struts + Shocks - FJ Cruiser Late
FREE SHIPPING
within 48 US States
Dobinsons IMS Shock Kit for Toyota FJ Cruiser 2010+
- Dobinsons IMS Monotube Strut and Shock Absorber Kit – Front and Rear
- Suits 2010-2016 Toyota FJ Cruiser
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Height Adjustable: Yes, fronts
- Reservoir: Internal
- Finish: Corrosion resistant (EDP Surface Protection)
- Body Design: 56mm OD
- Rod: Double Chrome 18mm
- Piston: Race inspired hi-flow CNC 6061 Billet alloy
- Oil: High Quality Fuch’s Oil from Germany
- Seals: Heavy Duty 3 Stage FKM HNBR Sealing System
- Rings: Teflon Piston Rings
- Bushings: Natural Rubber
- Internal Design: IFP (Internal Floating Piston) Monotube
- Boot Included: Yes
- Bushings Included: Yes, top and bottom, front and rear
- IMS59-50700 specs – 560mm extended, 420mm compressed
- IMS59-50701 specs – 598mm extended, 389mm compressed
- Reuse original coil springs or buy new Dobinsons springs
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(13 reviews)
From $1,300.00 Select options
Shocks + Struts - Lexus GX460
FREE SHIPPING
within 48 US States
Dobinsons IMS Shock Kit for Lexus GX460
- Dobinsons IMS Monotube Strut and Shock Absorber Kit – Front and Rear
- Suits 2010-2023 Lexus GX460
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Height Adjustable: Yes, fronts
- Reservoir: Internal
- Finish: Corrosion resistant (EDP Surface Protection)
- Body Design: 56mm OD
- Rod: Double Chrome 18mm
- Piston: Race inspired hi-flow CNC 6061 Billet alloy
- Oil: High Quality Fuch’s Oil from Germany
- Seals: Heavy Duty 3 Stage FKM HNBR Sealing System
- Rings: Teflon Piston Rings
- Bushings: Natural Rubber
- Internal Design: IFP (Internal Floating Piston) Monotube
- Boot Included: Yes
- Bushings Included: Yes, top and bottom, front and rear
- IMS59-50700 specs – 560mm extended, 420mm compressed
- IMS59-50701 specs – 598mm extended, 389mm compressed
- Reuse original coil springs or buy new Dobinsons springs
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(13 reviews)
From $1,300.00 Select options
Shocks + Struts - Lexus GX470
FREE SHIPPING
within 48 US States
Dobinsons IMS Shock Kit for Lexus GX470
- Dobinsons IMS Monotube Strut and Shock Absorber Kit – Front and Rear
- Suits 2003-2009 Lexus GX470
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Height Adjustable: Yes, fronts
- Reservoir: Internal
- Finish: Corrosion resistant (EDP Surface Protection)
- Body Design: 56mm OD
- Rod: Double Chrome 18mm
- Piston: Race inspired hi-flow CNC 6061 Billet alloy
- Oil: High Quality Fuch’s Oil from Germany
- Seals: Heavy Duty 3 Stage FKM HNBR Sealing System
- Rings: Teflon Piston Rings
- Bushings: Natural Rubber
- Internal Design: IFP (Internal Floating Piston) Monotube
- Boot Included: Yes
- Bushings Included: Yes, top and bottom, front and rear
- IMS59-50220 specs – 567mm extended, 417mm compressed
- IMS59-50701 specs – 598mm extended, 389mm compressed
- Reuse original coil springs or buy new Dobinsons springs
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(13 reviews)
From $1,300.00 Select options
Shocks + Struts - 4th Gen 4Runner
FREE SHIPPING
within 48 US States
Dobinsons IMS Shock Kit for 4th Gen Toyota 4Runner 2003-2009
- Dobinsons IMS Monotube Strut and Shock Absorber Kit – Front and Rear
- Suits 2003-2009 Toyota 4Runner
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Height Adjustable: Yes, fronts
- Reservoir: Internal
- Finish: Corrosion resistant (EDP Surface Protection)
- Body Design: 56mm OD
- Rod: Double Chrome 18mm
- Piston: Race inspired hi-flow CNC 6061 Billet alloy
- Oil: High Quality Fuch’s Oil from Germany
- Seals: Heavy Duty 3 Stage FKM HNBR Sealing System
- Rings: Teflon Piston Rings
- Bushings: Natural Rubber
- Internal Design: IFP (Internal Floating Piston) Monotube
- Boot Included: Yes
- Bushings Included: Yes, top and bottom, front and rear
- IMS59-50220 specs – 567mm extended, 417mm compressed
- IMS59-50701 specs – 598mm extended, 389mm compressed
- Reuse original coil springs or buy new Dobinsons springs
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(13 reviews)
From $1,300.00 Select options
Struts + Shocks - FJ Cruiser Early
FREE SHIPPING
within 48 US States
Dobinsons IMS Shock Kit for Toyota FJ Cruiser 2006-2009
- Dobinsons IMS Monotube Strut and Shock Absorber Kit – Front and Rear
- Suits 2006-2009 Toyota FJ Cruiser
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Height Adjustable: Yes, fronts
- Reservoir: Internal
- Finish: Corrosion resistant (EDP Surface Protection)
- Body Design: 56mm OD
- Rod: Double Chrome 18mm
- Piston: Race inspired hi-flow CNC 6061 Billet alloy
- Oil: High Quality Fuch’s Oil from Germany
- Seals: Heavy Duty 3 Stage FKM HNBR Sealing System
- Rings: Teflon Piston Rings
- Bushings: Natural Rubber
- Internal Design: IFP (Internal Floating Piston) Monotube
- Boot Included: Yes
- Bushings Included: Yes, top and bottom, front and rear
- IMS59-50220 specs – 567mm extended, 417mm compressed
- IMS59-50701 specs – 598mm extended, 389mm compressed
- Reuse original coil springs or buy new Dobinsons springs
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(13 reviews)
From $1,300.00 Select options
Shocks + Struts - Tacoma 3rd Gen
FREE SHIPPING
within 48 US States
Dobinsons IMS Shock Kit for Toyota Tacoma 2005-2023
- Dobinsons IMS Monotube Strut and Shock Absorber Kit – Front and Rear
- Suits 2005-2023 Toyota Tacoma’s
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Height Adjustable: Yes, fronts
- Reservoir: Internal
- Finish: Corrosion resistant (EDP Surface Protection)
- Body Design: 56mm OD
- Rod: Double Chrome 18mm
- Piston: Race inspired hi-flow CNC 6061 Billet alloy
- Oil: High Quality Fuch’s Oil from Germany
- Seals: Heavy Duty 3 Stage FKM HNBR Sealing System
- Rings: Teflon Piston Rings
- Bushings: Natural Rubber
- Internal Design: IFP (Internal Floating Piston) Monotube
- Boot Included: Yes
- Bushings Included: Yes, top and bottom, front and rear
- IMS59-50220 specs – 22.3″ extended, 16.4″ compressed
- IMS59-50940 specs – 24.2″ extended, 14.2″ compressed
- Reuse original coil springs or buy new Dobinsons springs
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(13 reviews)
From $1,300.00 Select options
Suspension
FREE SHIPPING
within 48 US States
Dobinsons IMS51-60116 Front IMS 2.6″ Shocks Pair
- For a 3″ front lift on Nissan GQ/GU Patrol and Toyota 78 or 79 Series Land Cruiser
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(8 reviews)
$700.00 Add to cart
Suspension
FREE SHIPPING
within 48 US States
Dobinsons IMS45-60915 Rear IMS 2.6″ Shocks Pair
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(8 reviews)
$700.00 Add to cart
Suspension
FREE SHIPPING
within 48 US States
Dobinsons IMS45-60914 Front IMS 2.6″ Shocks Pair
- For a 4″ front lift on Nissan GQ/GU Patrol and Toyota 78 or 79 Series Land Cruiser
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(8 reviews)
$700.00 Add to cart
Suspension
FREE SHIPPING
within 48 US States
Dobinsons IMS45-60913 Rear IMS 2.6″ Shocks Pair
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(8 reviews)
$700.00 Add to cart
Suspension
FREE SHIPPING
within 48 US States
Dobinsons IMS45-60115 Rear IMS 2.6″ Shocks Pair
- Full vehicle fitment list is down below
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 650mm extended, 421mm compressed
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(8 reviews)
$700.00 Add to cart
Suspension
FREE SHIPPING
within 48 US States
Dobinsons IMS45-60114 Front IMS 2.6″ Shocks Pair
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(8 reviews)
$700.00 Add to cart