Your cart is currently empty!
Samurai
Showing all 12 resultsSorted by popularity
-
Samurai
Suzuki Samurai Polycarbonate Windshield with Seal
- Suits 1986 to 1995 Suzuki Samurai and 1982 to 1985 Suzuki SJ410
- Includes new rubber seal
- Makrolon® AR2 Lexan Polycarbonate
- Off-Road Use Only
- 250% stronger than glass and will never break
- Has a scratch-resistant coating and produces less glare than glass
- Polycarbonate windshields are optically clear
(9 reviews) -
Samurai
Suzuki Samurai Updated Transfer Case Front Output Shaft w/Pilot Bearing
- Suits 1986 to 1995 Suzuki Samurai
- Repeated popping of the front output shaft gear will result in gear failure and loss of power to the front axle
- In 1994 Suzuki upgraded the output shaft to a heavier duty version and stopped using the older style shaft that was prone to failure
- These later style shafts are a drop-in replacement for 1986-1993 transfer cases
- The front output gear can be installed without fully disassembling the transfer case
- Only the front output cover needs to be removed for installation
- Install the updated gear now and keep the older gear in your tool box as a trail spare
- NOTE: Includes high-quality output shaft pilot bearing
(9 reviews) -
Sale!
15% off Year End SaleSamuraiSuzuki Samurai 4.16:1 Transfer Case Gear Set
- Suits 1986 to 1995 Suzuki Samurai
- Low Range reduction is 4.16 to 1 (84% low range reduction). High Range reduction is 12%
- Includes new precision cut gears, counter shaft, needle bearings, shims, O-ring, gaskets, and input/output seals
- Heavy Duty Samurai T-Case Output Shaft recommended
- Made out of Japanese SCM415 alloy for its greater strength and wear resistance
- SCM415 outperforms the 8620 material in yield and ultimate tensile strength
- Note: The recommended tire size for the 4.16 gears is 29″-30″
- Installation Instructions
(9 reviews) -
Sale!15% off Year End SaleSamurai
Suzuki Samurai 4.9:1 Transfer Case Gear Set
- Suits 1986 to 1995 Suzuki Samurai
- Low Range reduction is 4.9 to 1 (115% low range reduction). High Range reduction is 12%
- Includes new precision cut gears, counter shaft, needle bearings, shims, O-ring, gaskets, and input/output seals
- Heavy Duty Samurai T-Case Output Shaft recommended
- Made out of Japanese SCM415 alloy for its greater strength and wear resistance
- SCM415 outperforms the 8620 material in yield and ultimate tensile strength
- Note: The recommended tire size for the 4.9 gears is 31″
- Installation Instructions
(9 reviews) -
Sale!15% off Year End SaleSamurai
Rubber Suzuki Samurai Body Mount Kit w/Hardware
- Suits 1986 to 1995 Suzuki Samurai
- Has all of the necessary OEM parts to remount the body to the frame
- Includes: All Rubber, Washers, Sleeves, Nuts, and Bolts for a full install to body
- We recommend coating your body mount locations with some type of rust inhibitor or paint
- New rubber mounts are sure to relieve your Suzuki of some creaks and rattles
- Includes all parts as pictured, including all new bolts
(5 reviews) -
Samurai
Suzuki Samurai Door Hinge Kit With All New Hardware
- Suits 1986 to 1995 Suzuki Samurai and 1982 to 1985 Suzuki SJ410
- Includes 4 hinges
- Includes all new plated hardware – 16 new 12mm head bolts with integrated washers
- Not Side Specific
- Primer Coated (Paint Required Before Installation)
(7 reviews) -
Sale!15% off Year End SaleSamurai
Suzuki Samurai Windshield Rubber Seal
- Suits 1986 to 1995 Suzuki Samurai and 1982 to 1985 Suzuki SJ410
- Suits OEM size windshield frame and glass
- OE style rubber seal
- Great idea to replace the frame at the same time as changing the windshield to make life easier
(9 reviews) -
Samurai
Suzuki Samurai Windshield Frame – New – For Soft Tops
- Suits 1986 to 1995 Suzuki Samurai
- Primer finish
- No hardware of any kind is included
- No glass is included
- All necessary holes are in place
- Paint it when you get it to match the color of your Samurai
- Replace your old rotten windshield frame
- Great idea to replace the frame at the same time as changing the windshield to make life easier
- We sell a new windshield seal as well
- We offer a polycarbonate windshield with a new seal also
(9 reviews) -
Sale!15% off Year End SaleSamurai
Suzuki Samurai Birfields – Longfield Samurai Front Axle Kit 33 Splines
- Suits 1986 to 1995 Suzuki Samurai
- Kit Includes: Birfields, Front axles, C-clips
- Made out of 100% chromoly and are precision polished to remove any imperfections that may cause stress risers
- Birfield housing is made out of forged 4340 chromoly steel
- Internals of our Longfield™ birfields are made out of 4340 chromoly steel and then dual heat-treated for superior strength
- The axle shafts are also made out of 4340 chromoly steel
- 60% stronger than stock
- Requires upgrade of spider gears to 26 spline gears on differential end, either by getting a locker with 26 splines, or using OEM rear spider gears
- Installation Instructions
(9 reviews) -
Sale!15% off Year End SaleSamurai
Suzuki Samurai 6.5:1 Transfer Case Gear Set
- Suits 1986 to 1995 Suzuki Samurai
- Low Range reduction is 6.5 to 1. High Range reduction is 20% (1.7 to 1)
- Includes four new precision cut gears, counter shaft, needle bearings, shims, O-ring, gaskets, and input/output seals
- Upgraded Trail-Safe seals included at no additional cost
- Heavy Duty Samurai T-Case Output Shaft recommended
- Made out of Japanese SCM415 chromoly alloy steel for its great strength and wear resistance
- SCM415 outperforms the 8620 material in yield and ultimate tensile strength
- Installation Instructions
- Special Seal Instructions
(9 reviews) -
Exhaust
Suzuki Exhaust Header – Samurai and Sidekick – 1.3L 1.6L 8V Engines
- Suits Suzuki Samurai, Suzuki Sidekick, and Geo Tracker with the 1.3L or 1.6L 8V Engines (will not suit 16V)
- Manufactured by one of the best header manufacturers in the world
- 3/8″ thick port matched head flange matches the Suzuki’s rectangular exhaust ports
- Every tube is CNC Mandrel bent to ensure maximum flow from each header pipe
- TIG welded fully stainless steel exhaust header is designed for a long service life
- OEM Style Header Gasket
- Squared at header flange to match head port
- EGR Passage tube welded into header
- O2 Sensor Port located at lower collector
- Minor welding is required to connect the collector into the factory exhaust system
- NOTE: This header is not smog legal in California and is for off-road use only in California. For all other states, check all applicable laws before ordering
(6 reviews) -
SamuraiFREE SHIPPING
within 48 US StatesKing 4WD Premium Suzuki Samurai Soft Top w/ Tinted Windows
- King 4WD Replacement Soft Top Fits 1986-1994 Suzuki Samurai with Factory Soft Top
- Does not include any framework
- Black Diamond Fabric with 31% smoke colored window tint
- Black Diamond Fabric
- Specification: Two Layer 24oz Marine Grade – Waterproof
- Testing: CFFA, FMVSS & SAE Requirements
- Specification: UV Approved
- Testing: Accelerated Light Aging Test – 1000 Hours
- Window Glass
- Specification: 96g DOT Approved Pressed flexible vinyl, undistorted, won’t shrink or yellow
- Testing: CFFA, FMVSS & SAE Requirements
- Zippers
- Specification: Reinforced nylon self-correcting zippers
- Testing: 50,000 Cycle Test – No bind or drag
- Velcro
- Specification: Industrial Grade Fiber
- Testing: 150 kg (330 lbs.) per square inch
- Seams
- Specification: 135-gauge thread with heat sealed seams, 4-piece thread per inch
- Testing: CFFA, FMVSS & SAE Requirements
- Belt Rails
- Specification: Polyethylene and Anti Cracking
- Testing: CFFA, FMVSS & SAE Requirements
(10 reviews)
