Coil Springs - LC250
Showing all 5 resultsSorted by popularity
-
DobinsonsDobinsons 15mm 0.6″ Rear Coil Spacer | Tundra Sequoia LC250 LC300 Tacoma GX550 4Runner
- Suits the following vehicles:
- 2022+ Toyota Tundra
- 2023+ Toyota Sequoia
- 2022+ Toyota Land Cruiser 300 Series
- 2024+ Toyota Tacoma with coil spring rear end
- 2025+ Toyota Land Cruiser 250 Series
- 2024+ Lexus GX550
- 2025+ Toyota 4Runner
- High Quality Polyurethane, maintains height over time
- Fits on top of coil spring, below the OE isolator
- Sold as 1 piece
- Lasts longer than rubber
- Easy to add lift height to correct for vehicle lean
- Adds 15mm (0.6″) of rear lift
- Order 2 and add 1 to each side to give an equal amount of lift
- Photo for illustration purposes
(6 reviews) -
250 Series Land Cruiser (2024-2026+)Dobinsons C59-882 Front Lifted Coil Springs – Pair
- Lifts the front of a 2024+ Toyota Land Cruiser 250 series 2.0″ with stock weight with the 2.4L or 2.7L gas engine.
- These are made for the Dobinsons range of struts and not intended to be use on OEM struts
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 450mm free height, 16.5mm wire diameter, 366LBF/in spring rate
- Sold in Pairs
(0 reviews)$300.00 Select options This product has multiple variants. The options may be chosen on the product page -
SpacersApache Offroad Rear Coil Spacer (0.5″ 0.75″ 1.0″) | Tundra Sequoia LC250 LC300 Tacoma GX550 4Runner
- Suits the following vehicles:
- 2022+ Toyota Tundra
- 2023+ Toyota Sequoia
- 2022+ Toyota Land Cruiser 300 Series
- 2024+ Toyota Tacoma with coil spring rear end
- 2025+ Toyota Land Cruiser 250 Series
- 2024+ Lexus GX550
- 2025+ Toyota 4Runner
- Choose from 1/2″, 3/4″ or 1.0″
- High Quality Polyurethane, maintains height over time
- Fits on top of coil spring isolator, below the frame
- Fits any OE style spring – w/ Top Cone isolator- OEM, Dobinsons, etc.
- Sold as 1 piece
- Lasts longer than rubber
- Easy to add lift height to correct for vehicle lean
- Order 2 and add 1 to each side to give an equal amount of lift
- OEM Cone Isolator shown in pictures is not included
- Photos for illustration purposes
(0 reviews)Price range: $38.00 through $58.00 Select options This product has multiple variants. The options may be chosen on the product page -
Coil Springs - LC250Dobinsons 0-2″ Lift Rear Coil Spring Options | Toyota Land Cruiser 250 2024+
- Suits 2024+ Toyota Land Cruiser 250 Hybrid models
- Choose what coil suits your vehicle and needs the best
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold as a Pair
- Discard passenger weight. Weight listed refers to additional product weight such as roof rack, drawers, rear bumper, swing out spare, etc. For most coils, 100lbs of added weight drops the rear by about 1/4″
- All specs based on a Hybrid model
- C59-883V – Stock height, stock weight, Variable Rate – no lift, but more load support when loaded or towing
- C59-885V – 12mm (0.5″) Lift, Variable Rate with stock weight rear end
- C59-817V – 50mm (2.0″) Lift, Variable Rate with 0-100LBS rear end constant load
- C59-819V – 50mm (2.0″) Lift, Variable Rate with 200-400LBS rear end constant load
- C59-821V – 50mm (2.0″) Lift, Variable Rate with 500-700LBS rear end constant load
- C59-823V – 50mm (2.0″) Lift, Variable Rate with 800-1000LBS rear end constant load
- C59-825V – 50mm (2.0″) Lift, Variable Rate with 1100-1300LBS rear end constant load
- Photos for illustration purposes
(0 reviews) -
Dobinsons
Dobinsons C59-818 Front Lifted Coil Springs – Pair
- Suits Toyota Land Cruiser 300 Series – Stock Height / 110-220lb Constant Front End Load
- 2024+ Toyota Land Cruiser 250 Series – 3.0″ lift with stock weight, or 2.5″ lift with 110-220LBS constant added weight
- 2024+ Toyota Tacoma non-hybrid – 1/2″ lift with stock weight
- These are made for the Dobinsons range of struts and not intended to be use on OEM struts
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 420mm free height, 18mm wire diameter, 508 LBF/in spring rate
- Sold in Pairs
- Made in Australia
(0 reviews)$300.00 Select options This product has multiple variants. The options may be chosen on the product page
