Your cart is currently empty!
Toyota
Showing 1051–1080 of 1158 resultsSorted by popularity
-
ARBOME 2860 Rear Coil Springs | Land Cruiser 80 and 100 Series – Pair
- OME Part Number 2860
- Bar Size : 17 mm
- Free Height : 480/490mm
- Number of Turns : 6.88
- Coil Weight (each): 6 Kg | 13.2 lbs
- Spring Rate : 220 lbs
- Sold in Pairs
(26 reviews) -
Differential | DrivetrainFREE SHIPPING
within 48 US StatesARB RD151 Front Tundra Air Locker 5.7L V8 8″
- For Use with Toyota Tundra 5.7L V8 front 2007 to 2021 with 8″ 34 spline axles
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.Â
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(11 reviews) -
Leaf Springs - Tacoma 3rd GenFREE SHIPPING
within 48 US StatesAll Pro 2005-2023 3.0″ Tacoma Leaf Springs Pair – Expedition 500LBS
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Expedition Leaf Springs give 3.0″ of lift with 500LBS of added constant load, less lift with more weight
- Number of Leaves: 9 + 1 Overload/Rebound
- Eyelet-to-Eyelet Length (Free): 54-3/8″ (1381 mm)
- Spring Rate: 207 lbs/in
- A higher number of thinner leafs provides a smoother, progressive spring rate compared to fewer, thicker leaves.
- Number of Leaves: 9 + 1 Overload/Rebound
- Double “military” wrap provides extra strength for the main leaf
- Eyelet-to-Eyelet Length (Free): 54-3/8″ (1381 mm)
- “Torque Leaf”, an extra half-leaf at the top of the spring pack, increases anti-wrap properties without hindering travel or ride quality.
- Diamond-cut leaf ends to eliminate stress points which may weaken leafs and lead to premature failure
- Teflon anti-friction pads between leafs provide smoother flex, lessen spring wear and reduce noise
- Leafs are shot-peened after forming to relieve stress.
- Every completed spring pack is pre-cycled to their travel extremity for quality control and to reduce the likelihood of initial sag.
- All-Pro leaf springs are sold in pairs, with a complete urethane bushing and sleeve kit.
- Spring Rate: 151 lbs/in for Standard, 207 lbs/in for Expedition, and 248 lbs/in for Expedition 2.0 Leaf Springs
- After installation, the stock rear bumps will no longer be sufficient to prevent the spring from inverting. You must purchase and install a set of bump stops that are of sufficient height to prevent the spring from going negative arch. For best results, we recommend Wheeler’s SuperBumps (sold separately). WOR-306957
- 4″ Extended brake lines – recommended at this lift height
- Requires a suitable 3″ lift shocks to go with them, such as IMS59-50941 or MRA59-A941
- Sold in Pairs
- Made in USA
(7 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US States2005-2023 Tacoma T-Case and Exhaust Skid Plate – Black Steel
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Easy, bolt-on installation
- All necessary hardware included
- Black Powder Coated
- 3/16-inch steel construction
- Protects t-case and exhaust
- Easy, bolt-on installation
- All hardware included
- Bare steel and black powder coat versions available (bare steel versions require painting before installation)
- Installation Instructions
- Made in USA
(7 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US States2005-2023 Tacoma T-Case and Exhaust Skid Plate – Bare Steel
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Easy, bolt-on installation
- All necessary hardware included
- Bare steel versions require painting before installation
- 3/16-inch steel construction
- Protects t-case and exhaust
- Easy, bolt-on installation
- All hardware included
- Bare steel and black powder coat versions available (bare steel versions require painting before installation)
- Installation Instructions
- Made in USA
(7 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US States2005-2023 Tacoma Transmission Skid Plate – Steel Black Powder Coated
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Does not fit 2WD Pre-Runner or 2.7L Automatic Single Cab Tacoma
- 3/16-inch steel – Black Powder Coated Steel
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
- Easy, bolt-on installation using all factory hardware
- Made in USA
- Requires All-Pro IFS Skid Plate
(7 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US States2005-2023 Tacoma Engine Skid Plate – Aluminum Black Powder Coated
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Covers from the front bumper down to the first cross member
- 1/4-inch aluminum construction – Black Powder Coated Steel
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Made in the USA
- Installation Instructions
(7 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US States2005-2023 Tacoma Engine Skid Plate – Steel Black Powder Coated
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Covers from the front bumper down to the first cross member
- 3/16-inch steel – Black Powder Coated Steel
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Made in the USA
- Installation Instructions
(7 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US States2005-2023 Tacoma Engine Skid Plate – Bare Steel
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Covers from the front bumper down to the first cross member
- 3/16-inch steel – Bare Steel – needs to be painted before installation
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Made in the USA
- Installation Instructions
(7 reviews) -
Skid Plates + Sliders - 5th Gen 4RunnerFREE SHIPPING
within 48 US States2010-2024 4Runner Engine Skid Plate – Black Powder Coated Steel
- Suits 2010-2024 Toyota 4Runner 5th Gen
- Covers from the front bumper down to the first cross member
- 3/16-inch steel – Black Powder Coat
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install 5th Gen 4Runner skid plate
- Skidplate not currently compatible with a diff drop kit – you would have to space it down
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Compatible with All-Pro 2010+ 4Runner Front Bumpers
- Not tested with KDSS Vehicles
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Made in the USA
- Installation Instructions
(7 reviews) -
Skid Plates + Sliders - 5th Gen 4RunnerFREE SHIPPING
within 48 US States2010-2024 4Runner Engine Skid Plate – Bare Steel
- Suits 2010-2024 Toyota 4Runner 5th Gen
- Covers from the front bumper down to the first cross member
- 3/16-inch steel – Bare Steel – needs to be painted before installation
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install 5th Gen 4Runner skid plate
- Skid plate not currently compatible with a diff drop kit – you would have to space it down
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Compatible with All-Pro 2010+ 4Runner Front Bumpers
- Not tested with KDSS Vehicles
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Made in the USA
- Installation Instructions
(7 reviews) -
Skid Plates + Sliders - 5th Gen 4RunnerFREE SHIPPING
within 48 US States2010-2024 4Runner Engine Skid Plate – Aluminum Black Powder Coated
- Suits 2010-2024 Toyota 4Runner 5th Gen
- Covers from the front bumper down to the first cross member
- 1/4-inch thick 5052 Aluminum – Black Powder Coated
- Optimal balance between strength and weight
- At only 22 lbs, it’s half the weight of similar steel undercarriage protection
- Save yourself from costly underbody repairs with this easy to install 5th Gen 4Runner skid plate
- Skid plate not currently compatible with a diff drop kit – you would have to space it down
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Compatible with All-Pro 2010+ 4Runner Front Bumpers
- Not tested with KDSS Vehicles
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Made in the USA
- Installation Instructions
(7 reviews) -
Skid Plates + Sliders - 5th Gen 4RunnerFREE SHIPPING
within 48 US States2010-2024 4Runner Engine Skid Plate – Bare Aluminum
- Suits 2010-2024 Toyota 4Runner 5th Gen
- Covers from the front bumper down to the first cross member
- 1/4-inch thick 5052 Aluminum – Bare
- Optimal balance between strength and weight
- At only 22 lbs, it’s half the weight of similar steel undercarriage protection
- Save yourself from costly underbody repairs with this easy to install 5th Gen 4Runner skid plate
- Skid plate not currently compatible with a diff drop kit – you would have to space it down
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Compatible with All-Pro 2010+ 4Runner Front Bumpers
- Not tested with KDSS Vehicles
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Made in the USA
- Installation Instructions
(7 reviews) -
Front BumpersFREE SHIPPING
within 48 US States2014-2024 4Runner LoPro Bumper – Bare Steel
- Suits 2014-2024 5th Gen Toyota 4Runners, but not Limited Models
- BUILT 100% IN THE USA!!
- Bare Steel – you have to powder coat or paint it after you receive it
- Photos show after it has been powder coated
- 3/16″ steel faceplate and 1/4″ steel winch plate
- 4 1/2″ x 10″ winch mounting pattern
- Compatible with most 8-12k winches with remote mount solenoid box
- Zinc plated hardware
- Designed to fit 30″ single-row light bars
- Compatible with Toyota Safety Sense (TSS) and Multi-Terrain Monitoring system (MTM)
- Cutting the plastic bumper is required to install this product
- Weighs 74lbs
- NOTE:Â Not compatible with Limited Edition 4Runners
- Download Instructions
- **We are not able to ship this outside the 48 US States
- Also available powder coated before it ships
(7 reviews) -
Front BumpersFREE SHIPPING
within 48 US States2016-23 Tacoma Aluminum Low Profile Front Bumper w/ Center Hoop
- Suits 2016-2023 Toyota Tacoma
- Ships in bare aluminum. You powder coat or paint it after you receive it
- This design allows you to keep the look of the OEM bumper while adding new high-quality features
- This bumper provides an increased approach angle in the front
- The body of this bumper is made from Aluminum with a steel support structure to ensure the highest durability
- We include two 3/4″ thick recovery points that are directly tied to the steel mounting plate
- It is designed to fit 30″ single-row light bars with a mounting width of 31.75″ or less
- This bumper is also compatible with most 8-12k winches with a remote mount solenoid box
- Made in the USA
- Installation Instructions
- Also available without a center hoop
(7 reviews) -
Front BumpersFREE SHIPPING
within 48 US States2016-23 Tacoma Aluminum Low Profile Front Bumper – No Hoop
- Suits 2016-2023 Toyota Tacoma
- Ships in bare aluminum. You powder coat or paint it after you receive it
- This design allows you to keep the look of the OEM bumper while adding new high-quality features
- This bumper provides an increased approach angle in the front
- The body of this bumper is made from Aluminum with a steel support structure to ensure the highest durability
- We include two 3/4″ thick recovery points that are directly tied to the steel mounting plate
- It is designed to fit 30″ single-row light bars with a mounting width of 31.75″ or less
- This bumper is also compatible with most 8-12k winches with a remote mount solenoid box
- Made in the USA
- Installation Instructions
- Also available with a center hoop attached
(7 reviews) -
Bumpers - Tacoma 3rd GenFREE SHIPPING
within 48 US States2016-23 Tacoma Steel Low Profile Front Bumper – No Hoop
- Suits 2016-2023 Toyota Tacoma
- Ships in bare steel. You powder coat or paint it after you receive it
- This design allows you to keep the look of the OEM bumper while adding new high-quality features
- This bumper provides an increased approach angle in the front
- Made from a CNC laser cut, brake-formed, 3/16″ steel faceplate and the 1/4″ steel winch plate
- We include two 3/4″ thick recovery points that are directly tied to the steel mounting plate
- It is designed to fit 30″ single-row light bars with a mounting width of 31.75″ or less
- This bumper is also compatible with most 8-12k winches with a remote mount solenoid box
- Made in the USA
- Installation Instructions
- Also available with a center hoop attached
(7 reviews) -
Wheels
Warn 104484 6 Lug Epic Wheel Hubs Center Cap – Grey
- Suits Warn wheels made specifically for 6 Lug 2021+ Ford Bronco, 2019+ Ford Ranger, FJ Cruiser, 2005-2023 Toyota Tacoma, and 2003-2023 Toyota 4Runner, Lexus GX470 and GX460
- Grey Finish
- Expertly Made From Premium Materials
- Meets The Highest Quality Standards
- ISO 9001: 2015, ISO 14001: 2015 CERTIFIED
- Easy To Install
- Limited 90 Day Supplier Warranty
- Wheel Series Compatibility: Moonsault/ Diamond Cutter And Jack Hammer Series Wheels
- Bolt Pattern (MM): 6×139.7
- Installation Type: Bolt-On
- Style: Closed
- Color: Grey
- Quantity: Single
- Bolt Pattern (IN): 6×5.50
- Material: Plastic
- Estimated Install Time (Hours): 0.25
(9 reviews) -
Wheels
Warn 104483 6 Lug Epic Wheel Hubs Center Cap – Black
- Suits Warn wheels made specifically for 6 Lug 2021+ Ford Bronco, 2019+ Ford Ranger, FJ Cruiser, 2005-2023 Toyota Tacoma, and 2003-2023 Toyota 4Runner, Lexus GX470 and GX460
- Black Finish
- Expertly Made From Premium Materials
- Meets The Highest Quality Standards
- ISO 9001: 2015, ISO 14001: 2015 CERTIFIED
- Easy To Install
- Limited 90 Day Supplier Warranty
- Wheel Series Compatibility: Moonsault/ Diamond Cutter And Jack Hammer Series Wheels
- Bolt Pattern (MM): 6×139.7
- Installation Type: Bolt-On
- Style: Closed
- Color: Black
- Quantity: Single
- Bolt Pattern (IN): 6×5.50
- Material: Plastic
- Estimated Install Time (Hours): 0.25
(8 reviews) -
WheelsFREE SHIPPING
within 48 US StatesWarn 104487 Diamond Cutter Wheel – 17×8.5″ 6×5.5″ 0 Offset – Black
- Warn wheels made specifically for 6 Lug 2021+ Ford Bronco, 2019+ Ford Ranger, FJ Cruiser, 2005-2023 Toyota Tacoma, and 2003-2023 Toyota 4Runner, Lexus GX470 and GX460
- 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 6 lugs, Uses OEM lug nuts
- Sold Individually
- Black Finish
- 1 Piece Cast Aluminum Construction
- Compatible With TPMS (Tire Pressure Monitoring System)
- With Warn Logo Center Cap
- Limited Lifetime Structural Warranty
- Bolt Pattern Inch:Â Not Applicable
- Bolt Pattern Millimeter:Â Not Applicable
- Weight: 30 LBS
- Diameter: 17
- Width:Â 8.5
- Offset:Â 0
- Backspacing:Â 4.75
- Material:Â Aluminum
- Finish:Â Painted
- Color: Black
- Bolt Pattern Inch:Â 6×5.50
- Bolt Pattern Inch:Â Not Applicable
- Bolt Pattern Millimeter:Â 6×139.7
- Bolt Pattern Millimeter:Â Not Applicable
- Lug Nut Seat Type:Â 60 Degree Conical
- Center Cap:Â See Replacement Items
- Center Bore:Â 106.10
- Lug Nut Design:Â Acorn
- Compatible With TPMS (Tire Pressure Monitoring Sys:Â Yes
- Basic Design: 6 Spoke
- With Inserts:Â No
- Load Capacity:Â 2500
- Size:Â 17×8.5
- Max Tire Diameter:Â 40
- Center Cap Design:Â Warn Logo
- Structural Warranty:Â Lifetime
- Quantity:Â Single
- Construction:Â One Piece Cast
- With Hub Centric Ring:Â Yes
- Estimated Install Time (Hours):Â 0.5
- Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.
(4 reviews) -
WheelsFREE SHIPPING
within 48 US StatesWarn 104490 Jack Hammer Wheel – 17×8.5″ 6×5.5″ 0 Offset – Gun Metal
- Warn wheels made specifically for 6 Lug 2021+ Ford Bronco, 2019+ Ford Ranger, FJ Cruiser, 2005-2023 Toyota Tacoma, and 2003-2023 Toyota 4Runner, Lexus GX470 and GX460
- 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 6 lugs, Uses OEM lug nuts
- Sold Individually
- Gun Metal Finish
- 1 Piece Cast Aluminum Construction
- Compatible With TPMS (Tire Pressure Monitoring System)
- With Warn Logo Center Cap
- Limited Lifetime Structural Warranty
- Bolt Pattern Inch:Â Not Applicable
- Bolt Pattern Millimeter:Â Not Applicable
- Weight: 30 LBS
- Diameter: 17
- Width:Â 8.5
- Offset:Â 0
- Backspacing:Â 4.75
- Material:Â Aluminum
- Finish:Â Painted
- Color: Gun Metal
- Bolt Pattern Inch:Â 6×5.50
- Bolt Pattern Inch:Â Not Applicable
- Bolt Pattern Millimeter:Â 6×139.7
- Bolt Pattern Millimeter:Â Not Applicable
- Lug Nut Seat Type:Â 60 Degree Conical
- Center Cap:Â See Replacement Items
- Center Bore:Â 106.10
- Lug Nut Design:Â Acorn
- Compatible With TPMS (Tire Pressure Monitoring Sys:Â Yes
- Basic Design: Solid Center
- With Inserts:Â No
- Load Capacity:Â 2500
- Size:Â 17×8.5
- Max Tire Diameter:Â 40
- Center Cap Design:Â Warn Logo
- Structural Warranty:Â Lifetime
- Quantity:Â Single
- Construction:Â One Piece Cast
- With Hub Centric Ring:Â Yes
- Estimated Install Time (Hours):Â 0.5
- Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.
(4 reviews) -
WheelsFREE SHIPPING
within 48 US StatesWarn 104489 Jack Hammer Wheel – 17×8.5″ 6×5.5″ 0 Offset – Black
- Warn wheels made specifically for 6 Lug 2021+ Ford Bronco, 2019+ Ford Ranger, FJ Cruiser, 2005-2023 Toyota Tacoma, and 2003-2023 Toyota 4Runner, Lexus GX470 and GX460
- 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 6 lugs, Uses OEM lug nuts
- Sold Individually
- Black Finish
- 1 Piece Cast Aluminum Construction
- Compatible With TPMS (Tire Pressure Monitoring System)
- With Warn Logo Center Cap
- Limited Lifetime Structural Warranty
- Bolt Pattern Inch:Â Not Applicable
- Bolt Pattern Millimeter:Â Not Applicable
- Weight: 30 LBS
- Diameter: 17
- Width:Â 8.5
- Offset:Â 0
- Backspacing:Â 4.75
- Material:Â Aluminum
- Finish:Â Painted
- Color: Black
- Bolt Pattern Inch:Â 6×5.50
- Bolt Pattern Inch:Â Not Applicable
- Bolt Pattern Millimeter:Â 6×139.7
- Bolt Pattern Millimeter:Â Not Applicable
- Lug Nut Seat Type:Â 60 Degree Conical
- Center Cap:Â See Replacement Items
- Center Bore:Â 106.10
- Lug Nut Design:Â Acorn
- Compatible With TPMS (Tire Pressure Monitoring Sys:Â Yes
- Basic Design: Solid Center
- With Inserts:Â No
- Load Capacity:Â 2500
- Size:Â 17×8.5
- Max Tire Diameter:Â 40
- Center Cap Design:Â Warn Logo
- Structural Warranty:Â Lifetime
- Quantity:Â Single
- Construction:Â One Piece Cast
- With Hub Centric Ring:Â Yes
- Estimated Install Time (Hours):Â 0.5
- Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.
(4 reviews) -
WheelsFREE SHIPPING
within 48 US StatesWarn 104485 Moonsault Wheel – 17×8.5″ 6×5.5″ 0 Offset – Black
- Warn wheels made specifically for 6 Lug 2021+ Ford Bronco, 2019+ Ford Ranger, FJ Cruiser, 2005-2023 Toyota Tacoma, and 2003-2023 Toyota 4Runner, Lexus GX470 and GX460
- 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 6 lugs, Uses OEM lug nuts
- Sold Individually
- Black Finish
- 1 Piece Cast Aluminum Construction
- Compatible With TPMS (Tire Pressure Monitoring System)
- With Warn Logo Center Cap
- Limited Lifetime Structural Warranty
- Bolt Pattern Inch:Â Not Applicable
- Bolt Pattern Millimeter:Â Not Applicable
- Weight: 30 LBS
- Diameter: 17
- Width:Â 8.5
- Offset:Â 0
- Backspacing:Â 4.75
- Material:Â Aluminum
- Finish:Â Painted
- Color: Black
- Bolt Pattern Inch:Â 6×5.50
- Bolt Pattern Inch:Â Not Applicable
- Bolt Pattern Millimeter:Â 6×139.7
- Bolt Pattern Millimeter:Â Not Applicable
- Lug Nut Seat Type:Â 60 Degree Conical
- Center Cap:Â See Replacement Items
- Center Bore:Â 106.10
- Lug Nut Design:Â Acorn
- Compatible With TPMS (Tire Pressure Monitoring Sys:Â Yes
- Basic Design:Â 8 Spoke
- With Inserts:Â No
- Load Capacity:Â 2500
- Size:Â 17×8.5
- Max Tire Diameter:Â 40
- Center Cap Design:Â Warn Logo
- Structural Warranty:Â Lifetime
- Quantity:Â Single
- Construction:Â One Piece Cast
- With Hub Centric Ring:Â Yes
- Estimated Install Time (Hours):Â 0.5
- Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.
(3 reviews) -
WheelsFREE SHIPPING
within 48 US StatesWarn 104486 Moonsault Wheel – 17×8.5″ 6×5.5″ 0 Offset – Gun Metal
- Warn wheels made specifically for 6 Lug 2021+ Ford Bronco, 2019+ Ford Ranger, FJ Cruiser, 2005-2023 Toyota Tacoma, and 2003-2023 Toyota 4Runner, Lexus GX470 and GX460
- 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 6 lugs, Uses OEM lug nuts
- Sold Individually
- Gun Metal Finish
- 1 Piece Cast Aluminum Construction
- Compatible With TPMS (Tire Pressure Monitoring System)
- With Warn Logo Center Cap
- Limited Lifetime Structural Warranty
- Bolt Pattern Inch:Â Not Applicable
- Bolt Pattern Millimeter:Â Not Applicable
- Weight: 30 LBS
- Diameter: 17
- Width:Â 8.5
- Offset:Â 0
- Backspacing:Â 4.75
- Material:Â Aluminum
- Finish:Â Painted
- Color:Â Gun Metal
- Bolt Pattern Inch:Â 6×5.50
- Bolt Pattern Inch:Â Not Applicable
- Bolt Pattern Millimeter:Â 6×139.7
- Bolt Pattern Millimeter:Â Not Applicable
- Lug Nut Seat Type:Â 60 Degree Conical
- Center Cap:Â See Replacement Items
- Center Bore:Â 106.10
- Lug Nut Design:Â Acorn
- Compatible With TPMS (Tire Pressure Monitoring Sys:Â Yes
- Basic Design:Â 8 Spoke
- With Inserts:Â No
- Load Capacity:Â 2500
- Size:Â 17×8.5
- Max Tire Diameter:Â 40
- Center Cap Design:Â Warn Logo
- Structural Warranty:Â Lifetime
- Quantity:Â Single
- Construction:Â One Piece Cast
- With Hub Centric Ring:Â Yes
- Estimated Install Time (Hours):Â 0.5
- Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.
(4 reviews) -
Airbag KitsFREE SHIPPING
within 48 US StatesToyota Tacoma Firestone 2407 Airbag Kit
- Suits 2005-2023 Toyota Tacoma 4×4 Trucks
- Intended for stock height leaf springs and shocks
- System Type: Leaf Spring Mount
- Load Capacity: 5,000 lbs per pair
- Bag/Spring Type: Double Convoluted
- Installation Type: Bolt On, No Drilling Required
- Inflation Method: Manual Inflation
- Min Air Pressure: 5 PSI, Max Air Pressure: 100 PSI
- Firestone Installation Instructions
- We also sell a Firestone air compressor and gauge kit to fill this up from inside the vehicle
(5 reviews) -
Airbag KitsFREE SHIPPING
within 48 US StatesToyota Tundra Firestone 2445 Airbag Kit 2007-21 Tundra
- Suits Toyota Tundra 2007-2021 with factory height leaf springs and shocks
- System Type: Leaf Spring Mount
- Load Capacity: 5,000 lbs per pair
- Bag/Spring Type: Double Convoluted
- Installation Type: Bolt On, No Drilling Required
- Inflation Method: Manual Inflation
- Min Air Pressure: 5 PSI, Max Air Pressure: 100 PSI
- Firestone Installation Instructions: Installation Instructions
- We also sell a Firestone air compressor and gauge kit to fill this up from inside the vehicle
(5 reviews) -
Tundra 1st Gen (2000-2006)FREE SHIPPING
within 48 US StatesPowerbrake D-Line HP Rotor and Pad Kit | Tundra 03-06
- Suits Toyota Tundra 2003-2006 Only with caliper stamped “13WL” (see attached photo for reference) – 4×4 Models with 6 lug hubs
- Powerbrake D-Line Features
- Rotors are cast from a proprietary high carbon cast-iron alloy.
- Rotors are machined to tolerances up to three times tighter than the industry norm.
- All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
- Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
- Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
- Matched high friction PB05 brake pads take the guesswork out of pad selection.
- Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
- Reduced stopping distances in both wet and dry conditions.
- Reduced brake fade and improved brake consistency.
- Improved initial brake response (bite).
- Improved brake modulation particularly during emergency stops.
- Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
- 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
- An axle set of matched PB05 high-performance brake pads – Made in Japan.
- Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
(6 reviews) -
Performance Upgrades - FJ Cruiser EarlyFREE SHIPPING
within 48 US StatesPowerbrake D-Line HP Rotor and Pad Kit | FJ Cruiser 10-16 Rear
- Suits Toyota FJ Cruiser 2010-2016 Rear
- Also available for the FRONT
- Powerbrake D-Line Features
- Rotors are cast from a proprietary high carbon cast-iron alloy.
- Rotors are machined to tolerances up to three times tighter than the industry norm.
- All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
- Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
- Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
- Matched high friction PB05 brake pads take the guesswork out of pad selection.
- Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
- Reduced stopping distances in both wet and dry conditions.
- Reduced brake fade and improved brake consistency.
- Improved initial brake response (bite).
- Improved brake modulation particularly during emergency stops.
- Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
- 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
- An axle set of matched PB05 high-performance brake pads – Made in Japan.
- Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
(6 reviews) -
Performance Upgrades - FJ Cruiser EarlyFREE SHIPPING
within 48 US StatesPowerbrake D-Line HP Rotor and Pad Kit | FJ Cruiser 06-09 Rear
- Suits Toyota FJ Cruiser 2006-2009 Rear
- Also available for the FRONT
- Powerbrake D-Line Features
- Rotors are cast from a proprietary high carbon cast-iron alloy.
- Rotors are machined to tolerances up to three times tighter than the industry norm.
- All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
- Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
- Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
- Matched high friction PB05 brake pads take the guesswork out of pad selection.
- Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
- Reduced stopping distances in both wet and dry conditions.
- Reduced brake fade and improved brake consistency.
- Improved initial brake response (bite).
- Improved brake modulation particularly during emergency stops.
- Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
- 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
- An axle set of matched PB05 high-performance brake pads – Made in Japan.
- Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
(9 reviews) -
Performance Upgrades - 4th Gen 4RunnerFREE SHIPPING
within 48 US StatesPowerbrake D-Line HP Rotor and Pad Kit | 4Runner Sport Front 03-09
- Suits Toyota 4Runner Sport 2003-2009 Front with OE 13.3″ Rotor Size
- Measure rotor size for 13.3″ diameter, or check back of brake caliper for stamping of “13WH”
- Also available for the REAR
- Powerbrake D-Line Features
- Rotors are cast from a proprietary high carbon cast-iron alloy.
- Rotors are machined to tolerances up to three times tighter than the industry norm.
- All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
- Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
- Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
- Matched high friction PB05 brake pads take the guesswork out of pad selection.
- Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
- Reduced stopping distances in both wet and dry conditions.
- Reduced brake fade and improved brake consistency.
- Improved initial brake response (bite).
- Improved brake modulation particularly during emergency stops.
- Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
- 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
- An axle set of matched PB05 high-performance brake pads – Made in Japan.
- Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
(5 reviews)
