Brakes - Sequoia 1st Gen
Showing all 4 resultsSorted by popularity
-
BrakesPowerbrake X-Line Replacement Brake Rotors Set
- These fit the Powerbrake X-Line vehicle specific line of brake upgrades Only
- Must be run with X-Line Brake Calipers and Pads
- These are sold in pairs, including 1 left and right side
- Pay attention to the wheel size, as some X-Line kits had multiple sizes, some for 16″, 17″ or 18″ wheels
- Reach out to us in advance if you aren’t sure which one to order
- Dimension specs of each rotor is listed down the page in the description
- AT480-PAIR – 13.8″ – Fits 17″ Wheels: Ford Ranger & Bronco
- AT481-PAIR – 13.8″ – Fits 17″ Wheels: JEEP Gladiator & JL Wrangler
- AT482-PAIR – 13.8″ – Fits 17″ Wheels: Tacoma 2nd & 3rd Gen (2005-2023), FJ Cruiser (all years), 4th & 5th Gen 4Runner (2003-2024), Hilux, 1st Gen Tundra (2000-2006) and Sequoia (2001-2007), Prado 150, Lexus GX470, GX460
- AT483-PAIR – 13.8″ – Fits 17″ Wheels: Landcruiser 100 Series (1998-2007)
- AT500-PAIR – 14.5″ – Fits 18″ Wheels: Land Cruiser 200 (2008-2021), 2nd Gen Tundra (2007-2021) / Sequoia (2008-2022)
- AT501-PAIR – 14.5″ – Fits 18″ Wheels: Land Cruiser 300 (2022+), 3rd Gen Tundra (2021+) & 3rd Gen Sequoia (2023+), Land Cruiser 250 (2024+), 4Runner 6th Gen (2025+), Tacoma 4th Gen (2024+), GX550
- We also sell the replacement pads, 5001-PB05 or 5002-PB05
(6 reviews)Price range: $825.00 through $995.00 Select options This product has multiple variants. The options may be chosen on the product page -
Sequoia 1st Gen (2001-2007)THIS SHIPS FREE
within 48 US StatesPowerbrake X-Line Front Toyota Sequoia Big Brake Kit for 2001-2007
2001-2007 Toyota Sequoia Big Brake Kit Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 350mm x 34mm (13.77″ x 1.33″) 48-vane discs
- Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- For 6-Lug models only (Pre-Runner and 4×4 models)
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- REQUIRES 17″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
(6 reviews)$3,350.00 Select options This product has multiple variants. The options may be chosen on the product page -
BrakesTHIS SHIPS FREE
within 48 US StatesPowerbrake D-Line HP Rotor and Pad Kit | Toyota Sequoia 2001-2007 Rear
- Suits Toyota Sequoia 2001-2007 Rear
- Also available for the FRONT
- Powerbrake D-Line Features
- Rotors are cast from a proprietary high carbon cast-iron alloy.
- Rotors are machined to tolerances up to three times tighter than the industry norm.
- All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
- Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
- Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
- Matched high friction PB05 brake pads take the guesswork out of pad selection.
- Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
- Reduced stopping distances in both wet and dry conditions.
- Reduced brake fade and improved brake consistency.
- Improved initial brake response (bite).
- Improved brake modulation particularly during emergency stops.
- Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
- 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
- An axle set of matched PB05 high-performance brake pads – Made in Japan.
- Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
(7 reviews) -
Tundra 1st Gen (2000-2006)THIS SHIPS FREE
within 48 US StatesPowerbrake D-Line HP Rotor and Pad Kit | Tundra Sequoia 2003-2006 Front
- Suits Toyota Sequoia and Toyota Tundra 2003-2006 Only with caliper stamped “13WL” (see attached photo for reference) – 4×4 Models with 6 lug hubs
- Powerbrake D-Line Features
- Rotors are cast from a proprietary high carbon cast-iron alloy.
- Rotors are machined to tolerances up to three times tighter than the industry norm.
- All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
- Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
- Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
- Matched high friction PB05 brake pads take the guesswork out of pad selection.
- Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
- Reduced stopping distances in both wet and dry conditions.
- Reduced brake fade and improved brake consistency.
- Improved initial brake response (bite).
- Improved brake modulation particularly during emergency stops.
- Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
- 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
- An axle set of matched PB05 high-performance brake pads – Made in Japan.
- Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
(6 reviews)
