Your cart is currently empty!
Tacoma
Showing 211–240 of 284 resultsSorted by popularity
-
Sale!
15% off Year End SaleTacoma 1st Gen (1996-2004)Tacoma 2.7L Exhaust Header – 1995-1998 Toyota Tacoma 2.7L 4 Cylinder
- Suits Toyota Tacoma 2.7L 4 Cylinder from 1995 to 1998
- Polished, 1/16” thick stainless steel tubes going into a ½” thick header-to-head mounting flange
- TIG welded and polished
- Comes with all gaskets and hardware
- Stainless steel full-band exhaust clamp
- Smog legal in California, making it legal in all 50 states
- Installation Instructions
(9 reviews) -
MRA Remote Resi 3-Way Adjustable MonotubeFREE SHIPPING
within 48 US StatesDobinsons 2.6″ 3-Way Adjustable Front Long Travel Coilovers Pair | Toyota & Lexus
- Dobinsons Long Travel Coilovers for the front of Toyota and Lexus Trucks and SUV’s
- Intended to be used on 4th and 5th Gen 4Runners, Lexus GX470 and GX460, FJ Cruisers, and Toyota Tacoma 2nd and 3rd Gens – with all Long Travel Parts Installed (upper and lower arms, axles, custom bump stops, limit straps, etc)
- Includes Different bolt pattern adapters for Top mount plate
- Specifications: 602mm (23.7″) extended, 399 mm (15.7″) compressed, uses 1.5″ long x 1/2″ Bolt for lower mounting
- Pair of Coilover Struts only, no coils included
- Height adjustable with a fully threaded body
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Does not include coil springs – sold separately
- These can only be run with aftermarket UCA’s for coilover clearance and full long travel lower arms – they will not work with OEM sized upper or lower arms
- Recommended Coils to run with these:
- C92-3016550 | Inner Diameter – 3.0″ | Length – 16″ | Spring Rate – 550lb/in
- C92-3016600 | Inner Diameter – 3.0″ | Length – 16″ | Spring Rate – 600lb/in
- C92-3016650 | Inner Diameter – 3.0″ | Length – 16″ | Spring Rate – 650lb/in
(9 reviews) -
Dirt King FabricationFREE SHIPPING
within 48 US StatesDirt King Tacoma Shock Relocation Kit | 2005-2023 Tacoma
- Suits 2WD and 4WD 6-Lug 2005-2023 Toyota Tacoma models
- Shocks mounted in the factory location typically measure 2.5″ x 8″, the Dirt King relocation kit is designed to accommodate for 2.5″ x 12″ shocks – like These
- Includes left and right hand sides and all hardware (welding required)
- All metal is shipped raw, as it requires welding – you paint when it’s all done
- Rear shock mounts
- Shock tabs
- Shock tab gussets
- Low profile wrench
- Reservoir mounts
- Grade 8 mounting hardware
- Dirt King sticker pack
- Installation Instructions
- Suitable with Dobinsons 12″ Travel Smoothie MRA Shocks
(4 reviews) -
RCI Off Road
RCI Rear Tacoma Diff Skid Plate | Non-Hybrid | 2024+ Tacoma
- Suits Toyota Tacoma 2024+ Non-Hybrid
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/4″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- MADE IN THE USA
(0 reviews) -
Skid Plates
Rear Shock Mount Skids | 2005-2023 Tacoma
- Includes one pair of shock mount skid plates (Driver/Passenger)
- Protects low hanging shock mounts on 2005-2023 Toyota Tacoma models
- Includes all hardware for installation
- Product includes a heavy duty black powder coat finish
- Made of 3/16″ Steel
- Fits OEM, Icon, Fox, King, Eibach, Bilstein and many others
- DOES NOT FIT ICON RXT REAR SHOCKS WITH SIDE-MOUNTED EYELET
- Made in Colorado, USA
(6 reviews) -
Skid Plates
Rear Shock Mount Skids | 2024+ Tacoma
- Includes one pair of shock mount skid plates (Driver/Passenger)
- Protects low hanging shock mounts on 2024 Tacoma models
- Includes all hardware for installation
- Product includes a heavy duty black powder coat finish
- Made of 3/16″ Steel
- Compatibility confirmed with TRD-Offroad OEM Bilstein shocks and King aftermarket stocks. Designed for compatibility with all OEM shock options (Trailhunter OEM OME shocks, TRD PRO OEM FOX, shocks, Prerunner OEM Tokicos shocks, TRD Sport OEM shocks
- Made in USA
(2 reviews) -
Tacoma 4th Gen (2024+)
RCI Aluminum Tacoma Roof Rack | 2024+ Tacoma
- RCI 4th Gen Toyota Tacoma Aluminum Roof Rack – suits 2024+ DUAL CAB models
- Only suits the dual cab models, will not suit access cabs
- Mount anything from lights, Hi-lift jacks, roof top tents, shower systems, Maxtrax, quick-fist, RotoPax, a spare tire, bike mounts, roof baskets, etc
- Heavy duty design will easily support roof top tents and heavy gear
- 1/4″ 5052 aluminum laser cut side panels and rear fairing. 1″x 2″ black anodized aluminum T-slot cross-bars. 1/8″ 5052 aluminum front fairing
- All aluminum components undergo a CNC deburring process to eliminate sharp edges for a high end, finished appearance
- T-Slot comes machined to accept nut plates and carriage bolts to simplify installation of accessories without ever having to remove bars
- Front wind fairing matches the contour of the roof and windshield for a superior fit and finish and improved aerodynamics
- Includes rubber trim and all necessary hardware for installation
- Our rack is features injection molded rubber mounting blocks that lift and cushion the roof rack mounting feet AND completely seal out moisture without the need for silicone!
- Built in side panel slots allow unlimited options for adding accessories such as handles, side lighting, awning mounts, and more
- Entirely bolt on design utilizes existing roof rack mounting holes
- Rack is only 1.75″ above highest point of the truck (not including antenna)
- Does NOT require the removal or alteration of roof antenna
- Industry standard T-slot cross-bars are compatible with hundreds of accessories
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer for an exponentially more durable finish
- Includes black stainless steel hardware, and trim. We don’t charge extra for high quality hardware
- Easy bolt together assembly, takes about 45 minutes to install
- All hardware and installation instructions provided
- Weighs approximately 39lbs
- Installation Guide
- Made in the USA
(0 reviews) -
Tacoma 4th Gen (2024+)
Icon 2024 Toyota Tacoma Coilovers – 2.5″ VS Remote Reservoir
- Suits 2024+ Toyota Tacoma
- Sold as a Pair
- Vehicle specific tuned for superior shock damping, vehicle control, and improved ride quality over stock
- Vehicle specific shock length and pairing with front differential drop yields maximum wheel travel
- Height-adjustable coilovers offer 1.25-3″ of lift height adjustment over stock
- 2.5″ diameter shock bodies with remote reservoirs
- Remote reservoirs maintain cooler operating temperatures during extended off-road use
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock bodies with 7/8″ diameter shafts
- FK rod end bearings for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
- APPLICATION NOTE #169: 4WD models require front differential drop part # 55160
- Matching Rear shocks are on this page
- Photos for Illustration Purposes Only
(0 reviews) -
Tacoma 4th Gen (2024+)FREE SHIPPING
within 48 US StatesIcon 2024 Tacoma Rear Shocks 0-1″ Lift VS 2.5 Aluminum – Remote Reservoir Pair
- Suits 2024+ Toyota Tacoma with 0-1″ of lift with coil spring rear end
- Will not fit 2024 Toyota Tacoma TRD PreRunner
- Sold as a Pair – order 1 for 1 vehicle
- ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
- Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
- One-piece, hard anodized, impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with remote reservoir
- One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- All ICON 2.5 Series Piggyback and Remote Reservoir shocks can be upgraded to ICON’s Compression Damping Control Valve (CDCV)
- 7/8” diameter induction hardened, chrome plated shock shaft
- Rubber dust boot included for added shaft protection
- PTFE lined spherical bearings and application specific mounting hardware
- 6061 aircraft grade aluminum CNC machined components
- Fully rebuildable and re-tunable
- Includes resi mounts and hardware
- Photo for illustration purposes only
(0 reviews) -
Tacoma 4th Gen (2024+)FREE SHIPPING
within 48 US StatesIcon 2024 Tacoma Rear Shock 0-1″ Lift VS 2.0 Aluminum – Remote Reservoir
- Suits 2024+ Toyota Tacoma with 0-1″ of lift with coil spring rear end
- Will not fit 2024 Toyota Tacoma TRD PreRunner
- Sold Individually – order 2 for 1 vehicle
- Nitrogen charged monotube design with remote reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- Remote reservoirs maintain cooler operating temperatures during extended off-road use
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrile rubber top out bumper for noise free operation
- Rubber dust boot included for added shaft protection
- Fully rebuildable and re-tunable
- Photo for illustration purposes only
(0 reviews) -
Tacoma 4th Gen (2024+)FREE SHIPPING
within 48 US StatesIcon 2024 Tacoma Rear Shock 0-1″ Lift VS 2.0 Aluminum – Internal Reservoir
- Suits 2024+ Toyota Tacoma with 0-1″ of lift with coil spring rear end
- Will not fit 2024 Toyota Tacoma TRD PreRunner
- Sold Individually – order 2 for 1 vehicle
- Nitrogen charged monotube design with internal reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrile rubber top out bumper for noise free operation
- Rubber dust boot included for added shaft protection
- Fully rebuildable and re-tunable
- Photo for illustration purposes only
(0 reviews) -
Tacoma 4th Gen (2024+)FREE SHIPPING
within 48 US StatesIcon 2024 Toyota LC250 / Tacoma Diff Drop Kit
- Suits 2024+ Toyota Tacoma and 2024+ Land Cruiser 250
- Drops front differential to provide better maximum operating angle for CV joints
- Maximizes available suspension travel when paired with ICON coilovers
- CNC laser cut, precision brake-formed steel bracketry with durable black powder coat finish
- Polyurethane bushings limit deflection and prevent differential movement under load
- 100% Bolt-on with no cutting or welding necessary for installation
- Required for installation of ICON coilover kits on 4WD 2024 Toyota Tacoma and Land Cruiser 250 models
- Installation Guide
(0 reviews) -
Tacoma 4th Gen (2024+)FREE SHIPPING
within 48 US StatesIcon 2024 Toyota Tacoma Coilovers – 2.5″ VS Internal Reservoir
- Suits 2024+ Toyota Tacoma
- Sold as a Pair
- Vehicle specific tuned for superior shock damping, vehicle control, and improved ride quality over stock
- Vehicle specific shock length and pairing with front differential drop yields maximum wheel travel
- Height-adjustable coilovers offer 1.25-3″ of lift height adjustment over stock
- 2.5″ diameter shock bodies with internal reservoirs for consistent performance
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock bodies with 7/8″ diameter shafts
- FK rod end bearings for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
- APPLICATION NOTE #169: 4WD models require front differential drop part # 55160
- Rear shocks are on this page
- Photos for Illustration Purposes Only
(0 reviews) -
Tacoma 4th Gen (2024+)
Toyota Tacoma Bed Stiffener Kit | 2024+ Tacoma
- Suits 2024+ Toyota Tacoma, any bed length
- Essential if running a cap, canopy or camper so that the bed flex doesn’t destroy the mounting points of those
- Stiffens bed sides and makes them more rigid
- Adds strength to the bed of the Tacoma and prevents the bed from bowing outwards
- Compatible with OEM bed mat
- Ideal for trucks with bed racks, toppers, RTT, and other heavy accessories
- Can be installed on both 5′ and 6′ bed lengths
- Features a bottle opener and additional tie down points
- Mounting locations for antennas, whips, or safety flags
- Installs in minutes
- Requires drilling for installation
- Powder coated with a two stage primer and textured black powder coat for an extremely durable, high quality finish
- All hardware and installation instructions provided
- Installation Instructions
- Made in Loveland, Colorado, USA!!
(0 reviews) -
Tacoma 4th Gen (2024+)
2024+ Tacoma Transfer Case Skid Plate from RCI
- For 2024+ Toyota Tacoma 4th Gen
- Protects third cross-member, transfer-case, and exhaust pipe
- Reinforced edges between cross-members for maximum strength and rigidity
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- All models include a heavy duty 3/16″ steel powder coated cross-member- aluminum option includes a powder coated steel cross-member
- Weights: 3/16″ Steel 24 LBS, 1/4″ Aluminum 12 LBS, Crossmember 15 LBS
- Verified to fit 4×4 TRD Offroad non-hybrid models. Suspected to fit other models, but not yet verified
- MADE IN LOVELAND, COLORADO, USA
(0 reviews) -
Tacoma 4th Gen (2024+)
2024+ Tacoma Transmission Skid Plate from RCI
- For 2024+ Toyota Tacoma 4th Gen
- Protects transmission, second and third cross-members
- Service openings for maintenance without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Weights: 3/16″ Steel 38 LBS, 1/4″ Aluminum 17 LBS
- Direct bolt on addition to existing factory attachment points, no drilling required
- Verified to fit 4×4 TRD Offroad non-hybrid models. Suspected to fit other models, but not yet verified
- MADE IN LOVELAND, COLORADO, USA
(0 reviews) -
Tacoma 4th Gen (2024+)
2024+ Tacoma Engine Skid Plate from RCI
- For 2024+ Toyota Tacoma 4th Gen
- Protects front two cross-members, low hanging front differential, and oil pan
- Service openings for easy service and oil changes without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Utilizes Center mounting points for maximum strength whether steel or aluminum
- Installs in minutes
- All hardware provided
- Weights: 3/16″ Steel 51 LBS, 1/4″ Aluminum 21 LBS
- Direct bolt on addition to existing factory attachment points, no drilling required
- Engine Skidplate requires the front crossmember below the radiator
- Verified to fit 4×4 TRD Offroad and TRD Pro Models
- If mounting to a Tacoma with out the factory front crossmember like TRD Sport, Limited or SR5 etc. you must add the additional Tacoma Front Skidplate Crossmember
- MADE IN LOVELAND, COLORADO, USA
(0 reviews) -
LX600FREE SHIPPING
within 48 US StatesDobinsons Billet Aluminum UCA’s Pair | LX600 LC300 LC250 Tacoma
- Super strong billet aluminum front upper control arms (UCA’s)
- Suits 2022+ Lexus LX600 and 2021+ Toyota Land Cruiser 300 Series (not sold in the USA) and 2024+ Toyota Tacoma, 250 Series Land Cruiser 2024+
- Complete kit for both left and right hand side
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- *Must reuse OEM Washers
- Installation Instructions
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
- Photos for illustration purposes
(0 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US StatesToyota Tacoma Overland Truck Bed Rack | 2005-2023
- Suits 2005 to 2023 Toyota Tacoma
- Rack hovers against the cab end of the bed and the sides
- Base price is bare steel
- Choose from 1/8” Thick Mild Steel (45 LBS) or 3/16” 5052 Aluminum (28 LBS)
- Choose from bare metal or powder coated
- Bed rack has mounting points for bungee cords/tie-down straps
- Designed to hold 4 8-gallon Action Packers
- Mounting points for Rotopax carriers
- Dimple died for extra strength
- CNC laser cut and formed
- Dimensions: 56.25” x 18.5”x3”
- Installation Instructions
- Photos show different versions of the same product type
- Made in the USA!!
(12 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US StatesToyota Tacoma Overhead MOLLE Panel | 2005-2015
- Suits 2005-2015 Toyota Tacoma 4-Door models, short or long bed
- Adds an awesome mounting area against the ceiling above the rear seats
- You can mount gear to the bottom of the rack and also place small items between the rack and roof
- Compatible with molle accessories, molle pouches, and magnetic items.
- 14 GA Steel Construction
- Height down from roof is approx. 2″ (between rear grab handles)
- Bolt-on installation, bolts where the factory grab handles go
- Approximate Molle mounting area is 9.5″ x 40.5″
- Finished in a durable black powder coat, ready to be used immediately!!
- Installation Instructions
- Made in the USA!!
(12 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US StatesToyota Tacoma Bed MOLLE Panel | 2005-2023
- Suits 2005-2023 Toyota Tacoma, short or long bed
- Adds an awesome mounting area against the back bed wall, below your back window, to attach all sorts of items to
- The panel can also be used to provide additional tie down locations for securing gear in the bed
- You will never run out of uses for this modular mounting panel
- Includes 11 Gauge Steel Molle Panel and Mounting Brackets
- Zinc Plated Mounting Hardware
- Panel has a Black Powder Coat Finish
- Compatible With or Without Factory Front Bed Accessory Bar
- .44” and .20”. Nominal Diameter Round Mounting Holes
- No Drilling is Required for Installation
- Finished in a durable black powder coat, ready to be used immediately!!
- Installation Instructions
- Short and Long Bed designs have different shapes and mounting holes, see photos to show the differences – they are not interchangeable
- Made in the USA!!
(10 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US StatesToyota Tacoma Bed Stiffener Kit | 2005-2023
- Suits 2005 to 2023 Toyota Tacoma, any bed length
- Essential if running a cap, canopy or camper so that the bed flex doesn’t destroy the mounting points of those
- Stiffens bed sides and makes them more rigid
- Recommended especially for tire clearance modifications or extra weight in the bed
- Provides additional tie down points for cargo
- Antenna whip or light mounting tab
- Some drilling is required for installation
- Installation Instructions
- Made in the USA!!
(7 reviews) -
Roof Racks
RCI Low-Pro Truck Bed Bars
- Super low profile (low pro) bed rack set to mount all sort of gear or a Roof Top Tent
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier, Ford Ranger, Chevy Colorado, GMC Canyon, Ford F150, Toyota Tundra, etc
- Utilizing 2 crossmembers spanning the truck bed, these bed bars have a high weight capacity and provide even weight distribution on the trucks bed side rails
- Bolts to inside of bed rails or can alternatively be mounted with optional “drill-free” clamps to mount like a truck topper (Not applicable when bolting to accessory rail systems)
- Bars are 3.5″ tall from bed rail to top of bars
- Adjustable width adapts to any truck bed from 54″- 69″ width between the bed rails
- Can be positioned up to 58″ apart (front to back)
- Using these bars will minimize the aerodynamic drag normally associated with roof top tents by keeping it below the roof-line
- Slotted mounting points on top of rack accept nearly any roof top tent making mounting a breeze
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer. This extra step is expensive and time consuming but ensures our paint job will outlast anything else in the industry!
- Easy bolt together assembly, takes about 15 minutes to install with only a few basic hand tools
- All hardware for installation is included
- INSTALL GUIDE
- Made in Loveland, Colorado USA
(5 reviews) -
Truck Caps + Canopies
MagPak Tacoma Camper Shell + Roof Top Tent Combo | Tacoma 2016-2023 5ft Bed
- Specifically suits 2016-2023 Toyota Tacoma Trucks with the short 5FT Bed length
- Pre-Production model shown in all photos and videos
- Check out the walk-around video down below in the description
- Integrated Roof Top Tent: Access the tent from inside the bed area
- Comfy Mattress: 2.5″ thick high density foam mattress
- Retractable Sleeping Area: Lift up the sleeping area to be able to stand up inside the camper for extra room during bad weather, to change clothes, or whatever you’d like
- Tough Fabrics: Premium 320G rip stop material construction of the tent
- Integrated LED Light Package: Strategically placed LED lights provide an inviting and functional glow
- No Drill Installation: Say goodbye to complex installations. Our no-drill installation process is hassle-free and preserves your truck’s integrity. You can have your camper ready for action in no time.
- Marine-Grade Stainless Construction: Engineered to withstand the harshest conditions, our camper is built to last. Crafted from aircraft-grade aluminum, it ensures longevity and corrosion resistance, ready to tackle any terrain.
- Textured Powder Coat Finish: The tough, textured powder coat finish not only adds a striking aesthetic but also provides extra protection against the elements, making your camper look great season after season.
- True Fit Technology: Say goodbye to the hassle of ill-fitting campers. Our True Fit Technology ensures a seamless and secure fit, giving your truck a sleek, integrated appearance.
- Waterproof Seals: Rain or shine, your cargo stays dry. Our camper features waterproof seals that create an impenetrable barrier against moisture, so you can venture into the unknown with confidence.
- Heavy-Duty Latches: Robust and dependable, our heavy-duty latches keep your camper securely closed, providing peace of mind whether you’re on or off the beaten path.
- Solid Hinges: Designed for longevity and strength, our solid hinges allow for smooth and reliable opening and closing of the camper, even after years of use.
- Tempered Glass: Safety is paramount. Our camper comes with Tempered glass, ensuring clear visibility and compliance with all safety standards.
- 3rd Brake Light: Added safety features for your peace of mind. The integrated third brake light enhances visibility, keeping you and those around you safe.
- High-Pressure Struts: Our camper boasts high-pressure struts, making it easy to access your gear while providing consistent and reliable support.
- 4 Year Warranty: We stand behind our product’s quality. Enjoy peace of mind with a 4 year warranty, ensuring your camper will be by your side for all your future journeys.
- Shipping Weight: 450 LBS
- Shipping Measurements: 120 x 70 x 42″
- Ships from the fulfillment warehouse on a pallet by LTL Freight, the freight line will be in touch with you to setup a delivery appointment
- We strongly recommend you keep the shipping insurance on your order during checkout, in case of any damage in transit, it will be covered
(3 reviews) -
Truck Caps + Canopies
Expedition Truck Cap with Full Wing Doors | Tacoma 2016-2023 5ft Bed
- Specifically suits 2016-2023 Toyota Tacoma Trucks with the short 5FT Bed length
- No Drill Installation: Say goodbye to complex installations. Our no-drill installation process is hassle-free and preserves your truck’s integrity. You can have your topper ready for action in no time.
- Marine-Grade Stainless Construction: Engineered to withstand the harshest conditions, our topper is built to last. Crafted from marine-grade stainless steel, it ensures longevity and corrosion resistance, ready to tackle any terrain.
- Textured Powder Coat Finish: The tough, textured powder coat finish not only adds a striking aesthetic but also provides extra protection against the elements, making your topper look great season after season.
- True Fit Technology: Say goodbye to the hassle of ill-fitting toppers. Our True Fit Technology ensures a seamless and secure fit, giving your truck a sleek, integrated appearance.
- Built-In Air Vent: Stay comfortable on the go with our integrated air vent. It ensures proper ventilation inside the topper, keeping your gear and equipment in optimal condition.
- Waterproof Seals: Rain or shine, your cargo stays dry. Our topper features waterproof seals that create an impenetrable barrier against moisture, so you can venture into the unknown with confidence.
- Heavy-Duty Latches: Robust and dependable, our heavy-duty latches keep your topper securely closed, providing peace of mind whether you’re on or off the beaten path.
- Solid Hinges: Designed for longevity and strength, our solid hinges allow for smooth and reliable opening and closing of the topper, even after years of use.
- Tempered Glass: Safety is paramount. Our topper comes with Tempered glass, ensuring clear visibility and compliance with all safety standards.
- 3rd Brake Light: Added safety features for your peace of mind. The integrated third brake light enhances visibility, keeping you and those around you safe.
- High-Pressure Struts: Our topper boasts high-pressure struts, making it easy to access your gear while providing consistent and reliable support.
- Modular Construction: Customize your topper to fit your needs. Our modular construction allows you to add or remove components easily, adapting to various adventures.
- Lifetime Warranty: We stand behind our product’s quality. Enjoy peace of mind with a lifetime warranty, ensuring your topper will be by your side for all your future journeys.
- Roof Rails and Crossbars: Take your adventures to the next level with our built-in roof rails and optional crossbars. They provide ample space to carry additional gear, bikes, kayaks, and more, allowing you to maximize your outdoor experiences.
- Dry Weight: 175 LBS
- Dynamic Weight Capacity: 325 LBS
- Static Weight Capacity: 750 LBS
- Measurements: 62 x 54 x 28″
- Ships from the fulfillment warehouse on a pallet by LTL Freight, the freight line will be in touch with you to setup a delivery appointment
- We strongly recommend you keep the shipping insurance on your order during checkout, in case of any damage in transit, it will be covered
(3 reviews) -
Upper Control ArmsFREE SHIPPING
within 48 US StatesIcon Tubular UCA DJ Kit Pair for 2005-2023 Tacoma
- Suits 2005-2023 Toyota Tacoma 4×4, Hilux and Fortuner
- Features patented ICON Delta Joint (U.S. Pat. 10,731,700)
- 1026 DOM Steel Construction
- CNC Bent Tubing
- Serviceable Dual Stage Bushings
- CNC Machined Bushing Housings and Sleeves
- Built-In Caster Correction
- Black Semi-Gloss Powder Coat Finish
- Installation Guide
- Warranty Info
(11 reviews) -
Control Arms - Tundra 2022+FREE SHIPPING
within 48 US StatesIcon Billet Rear Upper Trailing Arms Pair | Tundra Sequoia Tacoma LC250
- Suits 2022-2024+ Tundra and 2023-2024+ Sequoia and 2024+ Tacoma 4×4 Models and 2024+ Toyota Land Cruiser 250
- On vehicle adjustment for different ride heights and pinion angles using ICON’s Double Adjuster System
- CNC machined 6061 aluminum construction
- Large FK Bearing JMX16T PTFE-lined rod ends
- Maintenance free, dual durometer bushings for maximum angularity and noise isolation
- Covered by ICON’s Limited Lifetime Warranty
- Installation Guide
- Warranty Info
(11 reviews) -
Control Arms - Tundra 2022+FREE SHIPPING
within 48 US StatesIcon Billet Rear Lower Trailing Arms Pair | 22+ Tundra 23+ Sequoia 24+ Tacoma
- Suits 2022-2024+ Tundra and 2023-2024+ Sequoia 4×4 Models and 2024+ Tacoma
- On vehicle adjustment for different ride heights and pinion angles using ICON’s Double Adjuster System
- Vehicle specific, high clearance design for reduced link contact with obstacles
- Replaceable Nylon Rock Slider to protect the link from damage
- CNC machined 6061 aluminum construction
- Large FK Bearing JMX16T PTFE-lined rod ends
- Maintenance free, dual durometer bushings for maximum angularity and noise isolation
- Covered by ICON’s Limited Lifetime Warranty
- Installation Guide
- Warranty Info
(10 reviews) -
Upper Control ArmsFREE SHIPPING
within 48 US StatesIcon Billet UCA DJ Pair for 2005-2023 Tacoma
- Suits 2005-2023 Toyota Tacoma 4×4, Hilux and Fortuner
- Features patended ICON Delta Joint (U.S. Pat. 10,731,700)
- CNC Machined 6061 Billet Aluminum Construction
- High-Quality PTFE-lined ¾” FK Rod Ends
- On-Vehicle Adjustable For Quick And Precise Alignment
- Caster and Camber Adjustability Allows For Fine Tuning Of Vehicle Handling
- Matte Anodized Finish Provides Exceptional Corrosion Resistance
- O-ring Sealed Delta Joint Cover Cap For Additional Protection From The Elements
- Installation Guide
- Warranty Info
(11 reviews) -
Bump Stops & SpacersFREE SHIPPING
within 48 US StatesDobinsons 2.2″ Hydraulic Bump Stop IFS Weld on Mount Kit
- Kit includes front Weld on Mounts (Pair) and Dobinsons HBS56-009 Pair of Hydro Bump Stops
- Made for IFS (independent front suspension) vehicles to replace the OEM rubber bump stop
- HBS56-009 – 56mm (2.2″) body | 46mm (1.8″) stroke | 188mm (7.4″) extended | 142mm (5.6″) compressed | 105mm (4.0″) thread length
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 150 PSI
- Extra Short Dead Lengths For Compact Fitment
- Universal design threaded weld on bump stop can to hold the 2.2″ body bump stop
- Cans have 3mm walls for increased strength
- Kit is ideal for those who bottom out often in their offroad driving or go really hard at high speeds
- Could suit a wide range of vehicles as listed below, but remember they are universal and will require adaptation to your vehicle and welding
- Custom fitting and welding is required
- Photo attached shows these bump stops installed with the weld-on mounts on a 3rd Gen Tacoma
(0 reviews)
