Your cart is currently empty!
Skid Plates, Sliders + Racks - Tacoma 4th Gen
Showing all 17 resultsSorted by popularity
-
Roof RacksRCI 12″ HD Low Profile Truck Bed Rack
- For Short Bed Trucks from 46-58″ in Bed Length
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier, Ford Ranger, Chevy Colorado, GMC Canyon, Ford F150, Toyota Tundra, etc
- Rack is 12″ tall from bed rail to top of rack
- Mount anything from lights, Hi-lift, co2, fire extinguisher, quick-fist, roto-pax, spare tire, roof top tent, etc
- This is our HD model, utilizing three cross-members spanning the truck bed, this rack is has the highest weight capacity and provides even weight distribution on the trucks bed side rails
- Built in mounting points allow unlimited options for adding accessories
- Bolts to inside of bed rails or can alternatively be mounted with optional “drill-free” clamps to mount like a truck topper (Not applicable when bolting to accessory rail systems)
- Rack is 12″ tall from bed rail to top of rack
- Adjustable width adapts to any truck bed from 54″ – 64″ width between the bed rails
- Three length options to fit any application from 5′ beds to 6’+
- Maintains very good visibility through the back window despite the low overall rack height
- Using this rack will minimize the aerodynamic drag normally associated with roof top tents by keeping it largely below the roof-line
- Slotted mounting points on top of rack accept nearly any roof top tent making mounting a breeze
- Includes TWO top braces, for unlimited accessory and tent mounting options
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer. This extra step is expensive and time consuming but ensures our paint job will outlast anything else in the industry!
- Easy bolt together assembly, takes about 45 minutes to install with only a few basic hand tools
- All hardware for installation is included
- Weights
- 5ft (46″) 86lbs
- 5ft6in(52″) 92lbs
- 6ft(58″) 96lbs
- Adjustable Bedrack Install Guide
- Made in Loveland, Colorado USA
(2 reviews) -
Tacoma 4th Gen (2024+)2024+ Tacoma Skid Plates Package from RCI
- For 2024+ Toyota Tacoma 4th Gen
- Includes engine, transmission and transfer-case skid plates.
- Protects front two cross-members, low hanging front differential, oil pan, transmission, second and third cross-members, exhaust cross pipe, and transfer-case
- Excellent addition or replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Built in oil drain hole allows easy access and ability to change oil without removal of plate
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat standard on steel skid plates for a rust resistant, durable and high quality finish
- Hardware included
- Direct bolt on addition to existing factory attachment points, no drilling required!
- Please note that some images show our A-Arm skid plates however they are not included with the skid plate package
- Verified to fit 4×4 TRD Offroad non-hybrid models. Suspected to fit other models, but not yet verified
- MADE IN LOVELAND, COLORADO, USA
(0 reviews) -
Rear DrawersFREE SHIPPING
within 48 US StatesOVS Slide Out Bed Extension for 5.0FT Short Bed Trucks
- Suits 5.0FT Short Bed Mid-Size Trucks
- Mid Size Short Bed 5.0′: 57.08″ long x 42.12″ wide x 7.28″ tall
- Potential Vehicle Fitments (Measure your truck bed first!!): Tacoma, Frontier, Gladiator, Ranger, Hilux, Colorado
- These are made in 3 different sizes. Mid-Size Truck 5.0Ft Long, Full Size Truck 5.5FT Long and Full Size Truck 6.5FT Long
- 75% Extension Bed Cargo Slide
- 1250 LBS. Max Load Capacity
- Steel Frame Construction
- 304 Stainless Steel Hardware
- Single Pull Latch for Easy Operation
- Multiple Anchor Points for Cargo Security
- Great for camping, easily slide out all your gear
- Excellent for work use, keep your tools and heavy objects organized, then slide them out easily to reach them
- Perfect for people with truck caps or canopies, easier to reach the parts out of the truck
- Some photos show the different sized models
(0 reviews) -
Skid Plates - LC250
RCI Land Cruiser 250 Catalytic Guards | 2024-2025
- Suits Toyota Land Cruiser 250 from 2024+
- Covers open space between frame and transmission skid plate
- Compatible with both steel and aluminum RCI transmission skid plates – REQUIRED
- Powder coated with a two stage primer and textured black powder coat for an extremely durable, high quality finish
- All hardware and installation instructions provided
- Installs in minutes
- Made in the USA
- INSTALL GUIDE (Click Here)
- Recommended to run in conjunction with the Engine Skid Plate and Transmission Skid Plate
- Transmission skid plate is REQUIRED in order to run these catalytic guards
- Please note, some images show the transmission skid plate that is necessary for installing the catalytic guards however the skid plate is not included with the catalytic guards
(0 reviews) -
Skid Plates - LC250
RCI Land Cruiser 250 Transfer Case Skid Plate | 2024-2025
-
- Suits Toyota Land Cruiser 250 from 2024+ and Hybrid 2024+ Tacoma TRD Pro DCSB Iforce Max
- Protects third cross-member, transfer-case, and exhaust pipe
- Reinforced edges between cross-members for maximum strength and rigidity
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Compatible with Hybrid Model
- Made in the USA
- INSTALL GUIDE (Click Here)
- Recommended to run in conjunction with the Engine Skid Plate and Transmission Skid Plate
(0 reviews) -
-
Skid Plates - LC250
RCI Land Cruiser 250 Transmission Skid Plate | 2024-2025
-
- Suits Toyota Land Cruiser 250 from 2024+ and Hybrid 2024+ Tacoma TRD Pro DCSB Iforce Max
- Protects transmission, second and third cross-members
- Service openings for maintenance without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Compatible with Hybrid model
- Made in the USA
- INSTALL GUIDE (Click Here)
- Recommended to run in conjunction with the Engine Skid Plate
(0 reviews) -
-
Skid Plates, Sliders + Racks - Tacoma 4th Gen
Rear Control Arm Skids | 2024+ Tacoma
- Suits 2024+ Toyota Tacoma with coil spring rear suspension
- Protects the front of the rear lower control arm links and factory link mounts on the frame
- Smooth, flat surface that easily slides over obstacles
- Black powder coat included for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Includes heavy duty hardware
- Kit includes both driver and passenger side lower link skids
- Confirmed Fitment on 24′ TRD OR only should fit all Tacoma models with rear coil suspension
- Made in USA
- Installation Instructions
(0 reviews) -
RCI Off Road
RCI Rear Tacoma Diff Skid Plate | Non-Hybrid | 2024+ Tacoma
- Suits Toyota Tacoma 2024+ Non-Hybrid
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/4″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- MADE IN THE USA
(0 reviews) -
Skid Plates
Rear Shock Mount Skids | 2024+ Tacoma
- Includes one pair of shock mount skid plates (Driver/Passenger)
- Protects low hanging shock mounts on 2024 Tacoma models
- Includes all hardware for installation
- Product includes a heavy duty black powder coat finish
- Made of 3/16″ Steel
- Compatibility confirmed with TRD-Offroad OEM Bilstein shocks and King aftermarket stocks. Designed for compatibility with all OEM shock options (Trailhunter OEM OME shocks, TRD PRO OEM FOX, shocks, Prerunner OEM Tokicos shocks, TRD Sport OEM shocks
- Made in USA
(2 reviews) -
Tacoma 4th Gen (2024+)
RCI Aluminum Tacoma Roof Rack | 2024+ Tacoma
- RCI 4th Gen Toyota Tacoma Aluminum Roof Rack – suits 2024+ DUAL CAB models
- Only suits the dual cab models, will not suit access cabs
- Mount anything from lights, Hi-lift jacks, roof top tents, shower systems, Maxtrax, quick-fist, RotoPax, a spare tire, bike mounts, roof baskets, etc
- Heavy duty design will easily support roof top tents and heavy gear
- 1/4″ 5052 aluminum laser cut side panels and rear fairing. 1″x 2″ black anodized aluminum T-slot cross-bars. 1/8″ 5052 aluminum front fairing
- All aluminum components undergo a CNC deburring process to eliminate sharp edges for a high end, finished appearance
- T-Slot comes machined to accept nut plates and carriage bolts to simplify installation of accessories without ever having to remove bars
- Front wind fairing matches the contour of the roof and windshield for a superior fit and finish and improved aerodynamics
- Includes rubber trim and all necessary hardware for installation
- Our rack is features injection molded rubber mounting blocks that lift and cushion the roof rack mounting feet AND completely seal out moisture without the need for silicone!
- Built in side panel slots allow unlimited options for adding accessories such as handles, side lighting, awning mounts, and more
- Entirely bolt on design utilizes existing roof rack mounting holes
- Rack is only 1.75″ above highest point of the truck (not including antenna)
- Does NOT require the removal or alteration of roof antenna
- Industry standard T-slot cross-bars are compatible with hundreds of accessories
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer for an exponentially more durable finish
- Includes black stainless steel hardware, and trim. We don’t charge extra for high quality hardware
- Easy bolt together assembly, takes about 45 minutes to install
- All hardware and installation instructions provided
- Weighs approximately 39lbs
- Installation Guide
- Made in the USA
(0 reviews) -
Tacoma 4th Gen (2024+)
Toyota Tacoma Bed Stiffener Kit | 2024+ Tacoma
- Suits 2024+ Toyota Tacoma, any bed length
- Essential if running a cap, canopy or camper so that the bed flex doesn’t destroy the mounting points of those
- Stiffens bed sides and makes them more rigid
- Adds strength to the bed of the Tacoma and prevents the bed from bowing outwards
- Compatible with OEM bed mat
- Ideal for trucks with bed racks, toppers, RTT, and other heavy accessories
- Can be installed on both 5′ and 6′ bed lengths
- Features a bottle opener and additional tie down points
- Mounting locations for antennas, whips, or safety flags
- Installs in minutes
- Requires drilling for installation
- Powder coated with a two stage primer and textured black powder coat for an extremely durable, high quality finish
- All hardware and installation instructions provided
- Installation Instructions
- Made in Loveland, Colorado, USA!!
(0 reviews) -
Tacoma 4th Gen (2024+)
2024+ Tacoma Transfer Case Skid Plate from RCI
- For 2024+ Toyota Tacoma 4th Gen
- Protects third cross-member, transfer-case, and exhaust pipe
- Reinforced edges between cross-members for maximum strength and rigidity
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- All models include a heavy duty 3/16″ steel powder coated cross-member- aluminum option includes a powder coated steel cross-member
- Weights: 3/16″ Steel 24 LBS, 1/4″ Aluminum 12 LBS, Crossmember 15 LBS
- Verified to fit 4×4 TRD Offroad non-hybrid models. Suspected to fit other models, but not yet verified
- MADE IN LOVELAND, COLORADO, USA
(0 reviews) -
Tacoma 4th Gen (2024+)
2024+ Tacoma Transmission Skid Plate from RCI
- For 2024+ Toyota Tacoma 4th Gen
- Protects transmission, second and third cross-members
- Service openings for maintenance without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Weights: 3/16″ Steel 38 LBS, 1/4″ Aluminum 17 LBS
- Direct bolt on addition to existing factory attachment points, no drilling required
- Verified to fit 4×4 TRD Offroad non-hybrid models. Suspected to fit other models, but not yet verified
- MADE IN LOVELAND, COLORADO, USA
(0 reviews) -
Tacoma 4th Gen (2024+)
2024+ Tacoma Engine Skid Plate from RCI
- For 2024+ Toyota Tacoma 4th Gen
- Protects front two cross-members, low hanging front differential, and oil pan
- Service openings for easy service and oil changes without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Utilizes Center mounting points for maximum strength whether steel or aluminum
- Installs in minutes
- All hardware provided
- Weights: 3/16″ Steel 51 LBS, 1/4″ Aluminum 21 LBS
- Direct bolt on addition to existing factory attachment points, no drilling required
- Engine Skidplate requires the front crossmember below the radiator
- Verified to fit 4×4 TRD Offroad and TRD Pro Models
- If mounting to a Tacoma with out the factory front crossmember like TRD Sport, Limited or SR5 etc. you must add the additional Tacoma Front Skidplate Crossmember
- MADE IN LOVELAND, COLORADO, USA
(0 reviews) -
Roof Racks
RCI Low-Pro Truck Bed Bars
- Super low profile (low pro) bed rack set to mount all sort of gear or a Roof Top Tent
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier, Ford Ranger, Chevy Colorado, GMC Canyon, Ford F150, Toyota Tundra, etc
- Utilizing 2 crossmembers spanning the truck bed, these bed bars have a high weight capacity and provide even weight distribution on the trucks bed side rails
- Bolts to inside of bed rails or can alternatively be mounted with optional “drill-free” clamps to mount like a truck topper (Not applicable when bolting to accessory rail systems)
- Bars are 3.5″ tall from bed rail to top of bars
- Adjustable width adapts to any truck bed from 54″- 69″ width between the bed rails
- Can be positioned up to 58″ apart (front to back)
- Using these bars will minimize the aerodynamic drag normally associated with roof top tents by keeping it below the roof-line
- Slotted mounting points on top of rack accept nearly any roof top tent making mounting a breeze
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer. This extra step is expensive and time consuming but ensures our paint job will outlast anything else in the industry!
- Easy bolt together assembly, takes about 15 minutes to install with only a few basic hand tools
- All hardware for installation is included
- INSTALL GUIDE
- Made in Loveland, Colorado USA
(5 reviews) -
Roof Racks
RCI 18″ HD Truck Bed Rack
- For Short Bed Trucks from 46-58″ in Bed Length
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier, Ford Ranger, Chevy Colorado, GMC Canyon, Ford F150, Toyota Tundra, etc
- Mount anything from lights, Hi-lift, CO2 tank, fire extinguisher, quick-fist, roto-pax, spare tire, roof top tent, bike mounts, roof baskets, etc
- This is our HD model, utilizing three cross-members spanning the truck bed, this rack is has the highest weight capacity and provides even weight distribution on the trucks bed side rails
- Built in mounting points allow unlimited options for adding accessories
- Bolts to inside of bed rails or can alternatively be mounted with optional “drill-free” clamps *Many Toyota and Jeep models can be bolted directly to accessory bed rails
- Rack is 18″ tall from bed rail to top of rack
- Maintains complete visibility through the back window of most trucks due to its added height
- Slotted mounting points on top of rack accept nearly any roof top tent, allowing tent to be bolted on in a matter of minutes
- Adjustable width adapts to any truck bed from 56.5″ – 64″ width between the bed rails
- Tall enough to fit up to a 35″ spare tire in the bed of a Tacoma, with even more room on full size pickups
- Includes TWO top braces for unlimited accessory and tent mounting options
- Heavy duty black textured powdercoat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer for an exponentially more durable finish
- Easy bolt together assembly, takes about 45 minutes to install
- All hardware and installation instructions provided
- Adjustable Bedrack Install Guide
- Made in Loveland, Colorado USA
(4 reviews) -
Roof Racks
RCI 12″ High HD Aluminum Truck Bed Rack
- For Short Bed Trucks from 46-58″ in Bed Length
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier, Ford Ranger, Chevy Colorado, GMC Canyon, Ford F150, Toyota Tundra, etc
- Rack is 12″ tall from bed rail to top of rack
- Low Profile design keeps a roof top tent lower than the roof line for better aerodynamics
- Weighs only 68 lbs compared to the steel version at 95lbs
- Built with .190″ heavy duty aluminum and 14ga steel telescoping top braces
- Mount anything from lights, Hi-lift, CO2 tank, fire extinguisher, quick-fist, roto-pax, spare tire, roof top tent, etc
- This is our HD model, utilizing three cross-members spanning the truck bed, this rack is has the highest weight capacity and provides even weight distribution on the trucks bed side rails
- Built in mounting points allow unlimited options for adding accessories
- Bolts to inside of bed rails or can alternatively be mounted with optional “drill-free” clamps
- Adjustable width adapts to any truck bed from 54″ – 64″ width between the bed rails
- Maintains very good visibility through the back window despite the low overall rack height
- Using this rack will minimize the aerodynamic drag normally associated with roof top tents by keeping it largely below the roof-line
- Slotted mounting points on top of rack accept nearly any roof top tent making mounting a breeze
- Includes TWO top braces for unlimited accessory and tent mounting options
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer for an exponentially more durable finish
- Easy bolt together assembly, takes about 45 minutes to install
- All hardware for installation is included
- Adjustable Bedrack Install Guide
- Made in Loveland, Colorado USA
(6 reviews)
