Your cart is currently empty!
c19-573v
Showing all 2 resultsSorted by popularity
-
Full Suspension Kits - Bronco 2021+FREE SHIPPING
within 48 US StatesDobinsons 1.5-3.5″ Ford Bronco MRA 3-Way Adjustable Kit
- Complete Dobinsons Suspension Kit for a Ford Bronco 2-Door or 4-Door Models 2021-2024+
- Will not suit Bronco Sport
- Choose all the parts down below to match your vehicle and needs, and also see the recommended parts to add on for a fuller kit
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Coils are teal or black. Struts are black
- All are assembled at the standard coil seat height, you adjust the height on the vehicle to the height you’d like
- The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts and hardware
- Fully rebuildable and re-valvable
- FRONT AND REAR COILOVERS ARE PRE-ASSEMBLED AND READY TO BOLT IN
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Includes front lower mount spacer for proper clearance to CV axle – must be installed!!
- Uses Dobinsons MRA19-A104 and MRA19-A105 struts with Dobinsons coils
- Front MRA19-A104 specs: 60mm piston, 22mm diameter rod, 609mm extended, 449mm compressed, 160mm stroke
- Rear MRA19-A105 specs: 60mm piston, 22mm diameter rod, 679mm extended, 449mm compressed, 230mm stroke
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle.
- New UCA’s are required for proper coilover and hose clearance, see all options
- Dobinsons Ford Bronco Sway Bar Relocation Bracket Kit should be added for coilover clearance
(10 reviews) -
Bronco (2021-2024+)FREE SHIPPING
within 48 US StatesDobinsons 1.5-3.5″ Rear MRA Bronco Coilovers 2.6″ Body 3-Way Adjustable
- Suits the Rear of a Ford Bronco 2-Door or 4-Door Models 2021-2024+
- Will not suit Bronco Sport
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Looking for a quick and easy way to lift your Bronco? This is your answer
- Coils are teal or black. Struts are black
- All are assembled at the standard coil seat height, you adjust the height on the vehicle to the height you’d like
- The Dobinsons MRA Coilovers will come pre-assembled with new struts, coils and top mounts and hardware
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Uses Dobinsons MRA19-A105 struts with Dobinsons C19-571V 2-Door coils Dobinsons C19-573V 4-Door coils
- Rear MRA19-A105 specs: 60mm piston, 22mm diameter rod, 679mm extended, 449mm compressed, 230mm stroke
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle.
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(2 reviews)
