Dobinsons IMS59-60710 for Toyota Tundra and Sequoia 2007+

dobinsons IMS specifications specs sheet

Dobinsons 1.75-3.0″ Pre-Assembled IMS Coilovers for Toyota Sequoia 08-22

Suits Toyota Sequoia 2008-2022 4×4 Models with 5.7L V8 Gas Engine
66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
Looking for a quick and easy way to lift your Sequoia? This is your answer
Select your desired lift height and tell us your weight – we’ll take care of the rest!!
Dobinsons IMS are height adjustable by an adjustable circlip. Springs must be compressed to change the clip height
All are assembled at the requested clip height in the drop box
The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
Fully rebuildable and re-valvable
615mm extended, 445mm compressed strut lengths
SOLD IN PAIRS – READY TO BOLT IN
Zero shock fade in all terrains with full load
Direct, bolt-on replacement for easy fitment, does require lower mount clearancing
IFP – Internal Floating Piston, separates oil and nitrogen
Corrosion resistant (EDP Surface Protection)
Heavy duty single piece lower leg
Enormous oil capacity
Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
Full 2 year limited warranty, no set rebuild time period
Photos for illustration purposes – Sequoia IMS coilovers use a slightly different coil seat as shown in secondary photos
Instructions for setting coil seat height
Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
Link to Matching rear shocks
Add an optional lean correction spacer for the driver’s side here

$1,370.00

In Stock

SKU: SEQIMSCOILOVERS Categories: Coilovers, Dobinsons, Full Suspension Kits - Sequoia 2nd Gen, Sequoia 2nd Gen (2008-2022), Suspension Tags: c59-476, c59-720, ims59-60710, sc59-012 Brand: Dobinsons Spring & Suspension

Description

Description

Dobinsons IMS Tundra Coilovers set for Toyota Sequoia 2nd Gen SUV’s 2008-2022 models, this setup allows you to choose what lift height you want your Dobinsons IMS set to, so that they can bolt right into your rig. With a massive 2.6″ body, these will give you the excellent on and off-road performance you’re looking for. Lift your Toyota Sequoia and bolt in these Dobinsons IMS Sequoia Coilovers to gain a significant ride quality improvement over your stock suspension, while getting that necessary added ground clearance under the front end of your IFS vehicle. Just don’t forget, the more lift you add, the more other parts that also should be added for geometry correction.

Link to Youtube video detailing the IMS shocks: https://youtu.be/Npfx40VD3kM

Dobinsons IMS Sequoia Coilovers – IMS Monotube IMS59-60710 Shock Absorbers are designed for next level performance over Twin Tube Shocks in those hot, harsh, demanding conditions. By utilising the Monotube design, Dobinsons IMS59-60710 Shock Absorbers are able to resist fade far longer on corrugated roads, long or hard working 4WD trips, towing or racing conditions.

The larger 60mm high flow pistons reduce internal pressures, reduce the heat generated, transfer heat to the body for faster cooling and offer improved damping performance and vehicle control at higher shaft speeds on rough terrain and during big impacts. Threaded bodies on struts allow for fine tuning of height and offer further improvements in cooling.

The micro-polished, hard chromed and heat treated shock shaft, CNC aluminum high flow race inspired piston, and DOM seamless tubing body provides the ultimate in performance and off-road durability.

Composite piston wear bands and a race style 3-stage sealing system offer the lowest levels of friction whilst maintaining durability and longevity. Dobinsons team of engineers spend hundreds of hours of testing and tuning the shim stacks and damping characteristics in each IMS Shock to ensure a balance of comfort, handling, vehicle control and offroad performance – Enjoy the ride

We proudly manufacture the highest quality replacement coil springs for many different applications, complying to ISO9001:2008 international quality standards from our state of the art manufacturing facility in Central Queensland, Australia.

Check out all the options for your Sequoia here: https://exitoffroad.com/product-category/toyota/sequoia/sequoia-2nd-gen/

All Dobinsons™ coil springs are load tested and scragged 100% to eliminate subsequent spring sag. We also perform spring fatigue and hardness testing using in-house state of the art testing equipment.

Dobinsons IMS59-60713 IFP Rear Shocks for Toyota Sequoia 2008-2022

Dobinsons PS59-4032 1/2″ Lift Alloy Strut Spacer | Land Cruiser 200 Tundra Sequoia

SPC 25490 | UCA’s for 2008-22 Sequoia & 2007-21 Tundra

2008 Toyota Sequoia Lift Kit
2009 Toyota Sequoia Lift Kit
2010 Toyota Sequoia Lift Kit
2011 Toyota Sequoia Lift Kit
2012 Toyota Sequoia Lift Kit
2013 Toyota Sequoia Lift Kit
2014 Toyota Sequoia Lift Kit
2015 Toyota Sequoia Lift Kit
2016 Toyota Sequoia Lift Kit
2017 Toyota Sequoia Lift Kit
2018 Toyota Sequoia Lift Kit
2019 Toyota Sequoia Lift Kit
2020 Toyota Sequoia Lift Kit
2021 Toyota Sequoia Lift Kit
2022 Toyota Sequoia Lift Kit