Shop

Showing 901–930 of 1944 resultsSorted by popularity

Tacoma 3rd Gen (2016-2023)
RCI Full Skid Plate Set | 2005-2023 Tacoma
- Includes front, transmission and transfer-case skid plates.
- Protects front two cross-members, low hanging front differential, oil pan, transmission, second and third cross-members, exhaust cross pipe, and transfer-case
- Excellent addition or replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Built in oil drain holes allow easy access and ability to change oil without removal of plate
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat standard on steel skid plates for a rust resistant, durable and high quality finish
- All transmission skid plates now come standard with center gussets, a feature exclusive to RCI. Due to the location of the transmission skid plate and spanning a two foot gap, skid plates in this area are prone to getting bent. With this plate that is no longer the case!
- ALL Transfer-case cross-members come standard with black powdercoat finish
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made to order
- Made in the USA
Rated 5.00 out of 5
(9 reviews)
$755.97 Select options
Sale!
4Runner 5th Gen (2010-2024)
FREE SHIPPING
within 48 US States
Dirt King Performance Lower Control Arms Pair – 5th Gen T4R Late FJC GX460 non-KDSS
- CAD designed
- Formed steel bushing gussets
- Internally ribbed with extrusions for weight reduction
- Preassembled for fast installation
- Grease fitting ports for easy servicing
- Zinc plated components for corrosion resistance
- Bump stop plating
- Limit strap tabbing
- Bypass shock tabbing
- Professionally MIG welded
- Proudly made in the USA
Rated 5.00 out of 5
(4 reviews)
Original price was: $1,849.00.Current price is: $1,664.00. Add to cart
Recovery
Dobinsons 4×4 Heavy Duty 18,000lb Greasable Snatch Block (Pulley)
- Dobinsons 4×4 Heavy Duty 18,000lb Greasable Snatch Block (Pulley)
- Includes branded carrying bag for protection
- Bright red color, less likely to be overlooked after a recovery is done
- Greasable pin in center hole for less resistance at the bearing
Rated 5.00 out of 5
(10 reviews)
$85.00 Add to cart
LJ70, LJ72, LJ73, LJ77 - 90-93 - Square Headlights
Dobinsons 1.75″-2.5″ Lift Kit for Toyota Land Cruiser LJ70 LJ72 LJ73 LJ77 1/90-5/93 w/Square Headlights
- For 1/90 to 5/93 Toyota 70 Series models, LJ70 LJ72 LJ73 LJ77 with Square Headlights
- Also suits 1994+ RJ70, RJ73, KZJ 70/71/73 with Square Headlights
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to match OE fitment specs
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit includes front and rear coils and shocks
- Choose your coils and load carrying ability, anywhere from 1.75″ up to 2.5″ of Lift
Rated 5.00 out of 5
(11 reviews)
From $1,160.00 Select options
Bundera LJ70/LJ73 - 84-89 - Round Headlights
Dobinsons 1.75″ to 2.5″ Lift Kit for Toyota Land Cruiser Bundera 70 Series 11/84-12/89
- For 11/84 to 12/89 Toyota 70 Series Bundera models, LJ70, LJ73, RJ70 and RJ73 with Round Headlights
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to match OE fitment specs
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit includes front and rear coils and shocks
- Choose your coils and load carrying ability, anywhere from 1.75″ up to 2.5″ of Lift
Rated 5.00 out of 5
(10 reviews)
From $1,160.00 Select options
Amigo
Dobinsons Heavy Duty Torsion Bar Pair for Isuzu Amigo
- For Isuzu Amigo models – must measure before ordering
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
Rated 5.00 out of 5
(3 reviews)
From $305.00 Select options
Suspension
FREE SHIPPING
within 48 US States
Dobinsons MRA59-A685 3-Way Adjustable MRA Rear Shocks Pair | 80 Series 6″ Lift + Tundra
- Suits Toyota Land Cruiser 80 Series and Lexus LX450 1990-97, suitable for 6″ of lift, and 2022+ Toyota Tundra with Long travel rear suspension
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 22mm / 7/8″ shaft diameter
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- 714mm extended, 440mm compressed
- Installation Instructions of the MRA Shocks
- Bump stop extensions and longer brake lines must be run with these longer shocks
Rated 5.00 out of 5
(19 reviews)
$1,350.00 Add to cart
On Backorder
Armor
Dobinsons 70 Series Winch Bumper | Land Cruiser 70 Series 1985-2007
- See below for full vehicle compatibility list
- Winch compatible
- Driving Light Mounts
- Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Bracketry, 1.6mm Bash Plates, 51mm top tubes
- Includes LED Turn Signals and all Required Hardware for Installation
- Separate Winch Cradle System, making installation faster
- Supplied Black, but can be painted by your paint shop
- Suits 10000-12000 LB Low Mount Winches
- Note: LJ versions of the 70 series (LJ71, LJ73, etc.) may have different bolt patterns in the frame horn ends, so drilling and adapting to the holes of the bumper may be required
- Ships to the nearest freight terminal on a pallet for you to pick up, unless you add home delivery. We will be in touch with that delivery address
Rated 5.00 out of 5
(3 reviews)
From $1,765.00 Select options
Tacoma 1st Gen (1996-2004)
Dobinsons 1.5″ to 2.0″ Front Coils for Toyota Tacoma 1998 to 2004
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Coil springs are sold as a pair, powder coated teal
- C59-276 – 1.5″ with stock weight
- C59-134 – 1.5″ with bumper and winch
- C59-134 – 2.0″ with stock weight
Rated 5.00 out of 5
(10 reviews)
From $270.00 Select options
Tacoma 1st Gen (1996-2004)
Dobinsons 1.5-2.0″ Lift Kit Toyota Tacoma 1998-2004 with Blocks or AAL
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs (a pair), Rear Spacer Blocks and U-Bolts
- Option now to use Wheeler’s add-a-leaf kit instead of blocks if you’d prefer
- It’s recommended that these coilovers to be run with aftermarket UCA’s for coilover clearance and correct travel
Rated 5.00 out of 5
(9 reviews)
From $930.00 Select options
Accessories
Dobinsons Single Drawer – Universal Mount – Large Size
- Measures 990mm long x 535mm wide x 275mm high, 80 LBS dry weight
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- 4 x Heavy Duty Stainless Steel Tie Down Points
- Aluminum Edging Protection, Heavy duty lockable latch
- Not compatible with 3rd row seat installed.
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Add optional Dobinsons Rear Drawer Table Top for better useability of the drawer
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
- Regular Ground shipping isn’t available due to potential product damage
Rated 5.00 out of 5
(3 reviews)
$800.00 Select options
40 Series Land Cruiser Late (1980-1984)
Dobinsons FJ40 Full 2.0″ Suspension Kit for Land Cruiser FJ40 BJ40 1980-1984
- For 1980+ Model FJ40’s with 35mm spring eye size front and rear
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
Rated 5.00 out of 5
(10 reviews)
From $1,560.00 Select options
Lighting
Dobinsons Wiring Kit for pair of Driving Lights
- Suitable for 2 LED light bars or a pair of Driving lights
- Includes switch, relay, and wiring harness, and zip ties.
- Light connections are waterproof, harness comes with 2 x male plug ends.
- Super easy and fast to install, plug and play design.
(0 reviews)
$40.00 Add to cart
Rear Bumpers
Dobinsons GX460 Rear Bumper with Tire and Jerry Can Carrier
- Suits Lexus GX460 from 2010-2023
- Black Powder Coat
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- Includes double Jerry can carrier and single spare tire carrier
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Does not include any hitch or towing ability. Designed to work around standard type tow hitch below rear cross member
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- Instructions Page
- 2010-2013 requires slight notch above bumper to clear swing outs.
- 2014 and up requires heavy modification to the OEM bumper to clear swing outs.
- Video detailing fitment steps on a 2014+ Model – https://youtu.be/LJPSsFSor7k
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
Rated 5.00 out of 5
(4 reviews)
$2,860.00 Select options
KL Cherokee (2014-2022) (Trailhawk)
Dobinsons Rear Lifted Coil Options for 4X4 Jeep Cherokee KL 2014 to 2022 – Pair
- Trailhawk (AD2) lifts 1.0″ rear. Sport (AD1) models lift 2″ rear, depending on weight added
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Can be used with Dobinsons heavy duty Twin-tube Nitrogas Struts
- Sold as a Pair
- Select which rear coils suit the amount of weight you have on your vehicle
Rated 5.00 out of 5
(17 reviews)
From $270.00 Select options
WK2 Grand Cherokee (2011-2022)
Dobinsons Rear Coil Springs for Jeep Grand Cherokee WK2 2010-2022 1.75″ Lift – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Black
- Will Not Suit Vehicles Equipped with Quadra-Lift
- Sold in Pairs
Rated 5.00 out of 5
(16 reviews)
$405.00 Add to cart
WK2 Grand Cherokee (2011-2022)
Dobinsons C29-128B Front Coil Springs for Jeep Grand Cherokee WK2 2010-2022 2.5″ Lift 3.0L V6 CRD, 2″ Lift V6 V8 Gas Stock Load – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Black
- Will Not Suit Vehicles Equipped with Quadra-Lift
- Sold in Pairs
Rated 5.00 out of 5
(20 reviews)
$270.00 Add to cart
WK2 Grand Cherokee (2011-2022)
Dobinsons C29-122B Front Coil Springs for Jeep Grand Cherokee WK2 2010-2022 2.0″ Lift V6 or 1.5″ Lift V8 Gas – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Black
- Will Not Suit Vehicles Equipped with Quadra-Lift
- Sold in Pairs
Rated 5.00 out of 5
(13 reviews)
$270.00 Add to cart
WK Grand Cherokee (2005-2010)
Dobinsons 1.75″ Lift Kit for Jeep Grand Cherokee WK from 2005-2010 and Commander 2006+
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Superior Designed Nitro Gas Shocks, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs for Medium Loads
Rated 5.00 out of 5
(13 reviews)
From $1,200.00 Select options
On Backorder
WK Grand Cherokee (2005-2010)
Dobinsons C29-029 Rear Coil Springs | Jeep Commander 2006-10 and Grand Cherokee WK 2005-10 (2″ Lift Heavy Load) – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
Rated 5.00 out of 5
(10 reviews)
$270.00 Add to cart
Fridge/Freezers
Dobinsons 4×4 Full Extension Fridge Slide to suit 40 and 50L Fridges and Coolers
- Suits most 40/50L fridges and coolers on the market today. Measure before ordering.
- Strong folded steel construction, rattle free, smooth sliding.
- Powder coated black for a long-lasting finish. Locks when closed only
- Includes 4 x Fridge straps, or you can bolt the feet of the fridge to the slide itself, eliminating the straps
- 105KG weight rating, 29.0″ x 16.25″ x 1.5″ internal dimensions, 30.75″ x 18.75″ x 2.5″ external dimensions
Rated 5.00 out of 5
(5 reviews)
$365.00 Add to cart
Accessories
Dobinsons Pickup Rear Drawers Kit with Fridge Slide 39x51x10″
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- Built in Heavy Duty Fridge Slide
- 8 x Heavy Duty Stainless Steel Tie Down Points
- Requires tonneau cover or canopy
- Universal Mount, measures 51.1 x 39.4 x 10 inches (L, W, H), requires drilling of truck bed, and custom fitting of side panels (if ordered)
- You can add a universal side wing panel kit down below, so that you can build out the edges of the drawers to the side of your bed
- Aluminum Edging Protection
- Heavy duty lockable latches
- Marine Carpet
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Ships to the nearest freight terminal for pickup, unless home delivery is option is added below. We will be in touch to let you know the terminal location
Rated 5.00 out of 5
(12 reviews)
From $1,845.00 Select options
Recovery
Dobinsons 4×4 Deluxe Vehicle Recovery Kit, Full Winching Kit
- Complete kit Includes: 9m x 8,000kg Snatch Strap with Sliding Protective Sleeve, 3m x 12,000kg Tree Trunk Protector
- Heavy Duty Carry Bag, Heavy Duty Leather Gloves
- Waterproof Work Mat (63 x 55″), Compact Tri-Fold Shovel, Heavy Duty 18,000lb Greasable Snatch Block (Pulley)
- 2 x 3.25 Ton Bow Shackle, 2 x 4.75 Ton Bow Shackle, Digital Tire Gauge with Auto Shut Off (psi, bar, kpa & kg/cm3)
- Packed Bag Dimensions: 23 x 12 x 6″, 30 LBS
Rated 5.00 out of 5
(10 reviews)
$295.00 Add to cart
Brake Lines
Apache Offroad Extended Front Brake Lines | 4Runner FJ GX470 GX460 Tacoma Tundra Sequoia
- Suits the following vehicles: Toyota 4Runner 4th Gen 2003-2009, Toyota 4Runner 5th Gen 2010-2024, Toyota FJ Cruiser all years, Lexus GX470 all years, Lexus GX460 all years, Tacoma 2005-2023, Tundra 2000-2006, Sequoia 2001-2007
- D.O.T. Certified stainless steel braided and coated with a PVC cover
- +2″ longer than stock
- Suits up to 4″ of lift with extended travel struts or coilovers, or stock
- Can be used on a stock height vehicle
- Sold as a pair
- OE Style Fittings- Reuse OEM Clips
- Warranty- 2 Year unlimited mile warranty against manufacturers defects
Rated 5.00 out of 5
(10 reviews)
$85.00 Add to cart
Suspension
FREE SHIPPING
within 48 US States
Apache Offroad Assembled Tubular UCA Pair | 4Runner FJ Cruiser GX470 GX460
- Suits Toyota 4Runner 4th and 5th Gen 2003-2024, FJ Cruiser all years, Lexus GX470 and GX460
- Complete assembled kit for both left and right hand side, includes new Moog ball joints, ball joint caps, rubber frame bushings
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Manufactured from Black Powder coated 1.5″ Steel Tube
- The Apache UCAs Feature Hardened Rubber Bushings for a quiet ride
- Comes assembled with OE sized Greaseable Moog Problem Solver Ball Joints
- Includes Machined Aluminum Dust Covers with dust seals
- Works for any lift height of 2.0″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Do not forget to grease your ball joints 🙂 They do not come pre-greased.
- Product Video
Rated 5.00 out of 5
(10 reviews)
$645.00 Add to cart
On Backorder
250 Series Land Cruiser (2024+)
ETA is Spring 2025
Dobinsons C59-883V Rear Coil Springs Pair
- Lifts the Rear of a 2024+ Toyota Land Cruiser 250 series 10mm (0.4″)
- This Variable Rate Coil Allows Less Height Change and Provides a Firmer Ride When Loaded
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(0 reviews)
$270.00
Coil Color Clear

Dobinsons C59-883V Rear Coil Springs Pair quantity
Select options This product has multiple variants. The options may be chosen on the product page
On Backorder
250 Series Land Cruiser (2024+)
ETA is Spring 2025
Dobinsons C59-882 Front Coil Springs Pair
- Lifts the front of a 2024+ Toyota Land Cruiser 250 series 2.0″ with stock weight with the 2.4L or 2.7L gas engine.
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(0 reviews)
$270.00
Coil Color Clear

Dobinsons C59-882 Front Coil Springs Pair quantity
Select options This product has multiple variants. The options may be chosen on the product page
Full Suspension Kits - Prado 90 95
FREE SHIPPING
within 48 US States
Dobinsons Land Cruiser Prado 90 95 IMS Lift Kit
- Suits Toyota Land Cruiser Prado 90 and 95 SWB and LWB 4×4 Models
- Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Fully rebuildable and re-valvable shocks
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- Adjustable height front struts from a fully threaded body
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base kit Includes 2 Front IMS Struts, 2 Rear IMS Shocks, and 4 Coil Springs
- Select from Teal, Red, or Black coil springs in the options below
- Note: This Prado 90 platform shares the same suspension design as the 3rd Gen Toyota 4Runner, so many descriptions will list the 3rd Gen 4Runner as that’s what these parts are most commonly sold for. However the weight of the Prado 90 is different, so the coil specs have been adjusted to suit the Prado 90.
(0 reviews)
From $1,770.00 Select options
Sale!
Silverado 1500 (2019-2024)
FREE SHIPPING
within 48 US States
Dirt King Tubular Ball Joint UCA’s Pair | Silverado + Sierra 1500 2019+
- Suits Chevy Silverado 1500 and GMC Sierra 1500 2019-2024
- Includes standard, Trailboss and AT4 models
- CAD designed
- Formed steel bushing gussets
- Constructed with 4130 chromoly tubing
- Preassembled for fast installation
- Maintenance free bushings
- Zinc plated components for corrosion resistance
- Durable black powder coat
- Professionally MIG welded
- Proudly made in the USA
- Includes Ball Joint Caps
- Installation Instructions
- Proudly made in the USA
(0 reviews)
Original price was: $749.00.Current price is: $674.00. Add to cart
On Backorder
Excluded
FREE SHIPPING
within 48 US States
Expedition Truck Cap Crossbars | Full Size Truck 72″(Pair)
- Designed to work with OVS Expedition Caps
- Cross bars are compatible with most roof rack accessories
- Ideal for mounting tents, awnings, shower tents, storage boxes, kayaks, skis, and more
- Removable end caps for easy access to T-slot attachments
- Weatherproof design resists rust and corrosion
- Sturdy aluminum construction supports up to 325 lbs dynamic and 750 lbs static with OVS Expedition Caps
- Aerodynamic, low-profile 2.75” design reduces wind noise
- Sleek, finished look with end caps
- Includes risers and all necessary hardware for easy installation
- Sold in pairs
- Available in 3 width sizes: 51.25”, 55”, and 72”
(0 reviews)
$299.99 Add to cart