Your cart is currently empty!
ARB 4x4 Accessories
Showing 1–30 of 41 resultsSorted by popularity
-
Skid PlatesFREE SHIPPING
within 48 US StatesARB 5421100 Skid Plate Kit | Lexus GX470 GX460 (without KDSS)
- Suits all Lexus GX470 and GX460 WITHOUT KDSS
- Click here to check if you have KDSS or not
- 3mm pressed and folded sheet steel adds more strength than a standard folded sheet.
- Laser cut sheet steel.
- Zinc plated and powder coated with a silver textured finish.
- Recessed mounting bolts are protected and easy to remove for vehicle servicing.
- The Under Vehicle Protection will fit with or without an ARB front bumper. Fitment has not been confirmed with other aftermarket bumper designs
- Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
- See more details below as well as product video
(10 reviews) -
Skid PlatesFREE SHIPPING
within 48 US StatesARB 5421110 Under Vehicle Protection Kit | Lexus GX460 (with KDSS)
- Suits all Lexus GX460 models WITH KDSS. Also suits 5th Gen 4Runner with KDSS
- You must check to make sure you have KDSS before ordering this kit
- 3mm pressed and folded sheet steel adds more strength than a standard folded sheet.
- Laser cut sheet steel.
- Zinc plated and powder coated with a silver textured finish.
- Recessed mounting bolts are protected and easy to remove for vehicle servicing.
- The Under Vehicle Protection will fit with or without an ARB front bumper. Fitment has not been confirmed with other aftermarket bumper designs
- Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
- See more details below as well as product video
(7 reviews) -
Skid PlatesFREE SHIPPING
within 48 US StatesARB 5421100 Skid Plate Kit | Toyota 4Runner 4th Gen 2003-2009
- Suits all Toyota 4Runner 4th Gen models from 2003 to 2009. Also fits 5th Gen 4runners without KDSS
- You must check to make sure you don’t have KDSS before ordering this kit
- 3mm pressed and folded sheet steel adds more strength than a standard folded sheet.
- Laser cut sheet steel.
- Zinc plated and powder coated with a silver textured finish.
- Recessed mounting bolts are protected and easy to remove for vehicle servicing.
- The Under Vehicle Protection will fit with or without an ARB front bumper. Fitment has not been confirmed with other aftermarket bumper designs
- Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
- See more details below as well as product video
(8 reviews) -
Air CompressorsFREE SHIPPING
within 48 US StatesARB CKMTA12 12V High Performance Twin Air Compressor
- Motors are water sealed, 100% ball bearing equipped (i.e. no bushings), and feature a unique linear brush pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.
- Compact twin motor, dual cylinder design makes it the highest flowing compressor in its class (voltage vs. size). Highest air flow rate of any 12V compressor of its size on the market at 174LPM [6.16CFM].
- Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. (Note: Air Locker Manifold Kit #171503 required to mount solenoids).
- Motors are internally thermal protected against extreme temperature damage. Over-pressure safety valve equipped. Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault.
- Compressor pistons are equipped with a heavy duty European made cylindrical roller bearing. Hard-anodized cylinder bores and PTFE (Teflon) impregnated carbon fibre piston seals for reduced friction and maximum trouble free life.
- 12V, Draws 50 Amps max, 6.16 CFM, 150 PSI max, 100% Duty Cycle
- 10.9 x 7.5 x 4.1 inches actual dimensions, 19.4 LBS with all items included
(4 reviews) -
SnorkelFREE SHIPPING
within 48 US StatesSafari Snorkel SS450HP – Toyota 4Runner 5th Gen 2010-2024
- Suits Toyota 4Runner 5th Gen models from 2010 to 2024
- Raises air intake to prevent water ingestion, while also allowing vehicles to utilize clean air when driving in dusty conditions.
- Vehicle specific design and factory airbox adaption fitment.
- Manufactured using durable, UV stable cross linked polyethylene material.
- Supplied as a comprehensive kit, including the necessary fasteners and mounting brackets.
- Unique air ram design acts as a highly efficient water separator to remove rain water form incoming air stream.
- Designed and manufactured in Australia
- 10% higher CFM for this application over other brand snorkels, due to large body design
- Requires cutting and drilling of the fender and A-pillar. Full instructions and template provided.
(20 reviews) -
ARB
ARB 171302V2 Air Inflation Hose Kit for Air Compressors
- Kit Includes: 1 x High heat pressure hose (18ft long), 1 x ARB air chuck with quick press fitting, 1 x ARB T-fitting for use with the CKMA12 ARB air compressor, an assortment of additional fittings to suit various camping and sporting gear such as air mattresses and basket balls
- For use with Air Compressor to fill up deflated tires after a day on the trail.
- Optional pump up kit allowing you to use your CKMA12 Compressor and the new CKMTA12 and CKMTA24 TWIN compressors to quickly plug in a heavy duty airline and air up tires after a day on the trail or fill up after patching a flat tire.
- Designed by ARB engineers for maximum air flow
- it has line protectors on the end, which helps from kinking, and makes the hose last a long time.
(7 reviews) -
Differential | Drivetrain
ARB 170112 Differential Diff Breather Kit
- Protect your axles, transfer case or transmission from water ingress when offroad by raising the position where the breather sits.
- The axle breather manifold is machined from billet aluminum and anodized, making it lightweight and resistant to the elements.
- The manifold has 4 axle breather ports allowing for between 1 and 4 breather lines to be connected. It is very compact allowing it to be installed in virtually any location.
- The air filter is the ARB compressor air filter, which is a splash resistant air filter with a washable high flow sintered bronze filter cartridge.
- 8mm Polyethylene tubing is flexible, oil resistant, water resistant and heat resistant. 8mm tubing has been selected over the standard 6mm tubing to improve the air flow and reduced the chance of oil blockages in long breather lines. The 8mm push-in fittings make the installation simple and fast.
- The kit comes with self tapping screws, but the manifold mounting holes are large enough to allow mounting using an M6 (1/4 inch) bolt or stud, which is the common size in most vehicle engine bays.
- This is a universal kit and can work with pretty much any SUV, Wagon or Pickup out there
- Read the full description down below
(8 reviews) -
Skid PlatesFREE SHIPPING
within 48 US StatesARB 5421100 Skid Plate Kit | Toyota FJ Cruiser
- Suits all Toyota FJ Cruiser (all years). Also fits 4th and 5th Gen 4runners without KDSS
- 3mm pressed and folded sheet steel adds more strength than a standard folded sheet.
- Laser cut sheet steel.
- Zinc plated and powder coated with a silver textured finish.
- Recessed mounting bolts are protected and easy to remove for vehicle servicing.
- The Under Vehicle Protection will fit with or without an ARB front bumper. Fitment has not been confirmed with other aftermarket bumper designs
- Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
- See more details below as well as product video
(9 reviews) -
Air CompressorsFREE SHIPPING
within 48 US StatesARB CKMA12 High Performance Medium 12V Air Compressor
- Designed specifically to run one or two Air Lockers and to air up tires (requires kit)
- Constructed of lightweight, high-strength, engineering-grade materials, including military and aerospace-grade components
- Relocatable, splash-resistant air filter with washable high-flow sintered bronze filter cartridge for cleaner, cooler air supply
- Fully sealed components for moisture and dust protection
- Over-pressure safety valve-equipped
- Pressure switch-controlled air manifold system specially designed for ARB Air Lockers
- Hard-anodized cylinder bore and PTFE-impregnated carbon fiber piston seal for reduced friction and maximum life
- Anti-vibration, sound-deadening, anodized mount dissipates motor heat and allows compressor to be repositioned 180 degrees
- Ball bearing-equipped motor (no bushings) with unique, linear brush, pre-load system for long life, low heat, and quiet operation
- Compressor piston equipped with a German-made, high shock-rated, cylindrical roller bearing
- Motor is internally thermal-protected against extreme temperature damage
- Comprehensive-photo illustrated installation guide
- 12V DC, Draws 14.2 Amps, 2.34 CFM, 100 PSI max
(3 reviews) -
80 Series Land Cruiser (1990-1997)
ARB 3411050 Toyota 80 Series Land Cruiser Front Winch Bumper 1990-1997
- Suits all Toyota Landcruiser 80 Series models from 1990 to 1997 and Lexus LX450
- Enhances the look of the 80 Series as well as providing awesome protection against animal strikes or rear end accidents
- Full width single piece steel welded bumper, includes all mounting hardware
- Compatible with a range of low mount winches without an integrated solenoid pack
- Includes driving light mounts as well as CB antenna mounts, welded in place
- Durable black powder coat finish
- Includes recessed turn signals in the bumper that you can wire into your OEM harness for additional visibility
- Not as heavy as it looks, just over 100lbs out of the packaging
- Ships by truck freight – we will be in touch with you about shipping details
- Fitment of Warn XD9000 & M8000 winch requires special spacer kit – ARB part no. 3500050.
- Best suited to a 10k or 12k low-mount winch, due to overall truck weight and size
- We offer a large variety of Winches as well
- Shipping is calculated in the shopping cart and it ships to your house
(7 reviews) -
ARB
ARB 171503 Air Compressor Manifold Kit
- Air Locker Manifold Kit enables the installation of Air Locker solenoids to an ARB Twin Compressor
- Complete manifold kit to suit Air Locker solenoid mounting on the ARB On-Board Twin Air Compressor Kits.
- This kit includes a manifold body with mounting bracket, BSP ports, NPT ports, high temperature resistant braided hose, NPT connection nipples and M6 hex head bolts and nylon lock-nuts which secure this kit.
- This manifold permits you to lock the front and rear air lockers without needing a compressor for each.
- Manifold body with mounting bracket
- 2 x 1/8″ BSPP ports for installation of up to 2 x Air Locker solenoids
- 2 x 1/4″ NPT ports, one to be used as an input and the second could be used for installation of a pump up kit (ARB 171302)
- 1 x high temperature resistant Teflon stainless steel braided hose with heavy duty JIC4 fittings
- 2 x JIC4 – 1/4″ NPT nipples to connect the included hose to the compressor outlet and manifold kit input
- 2 x M6 hex head bolt and nylon lock-nuts for securing the manifold kit
(3 reviews) -
Snorkel
Safari Snorkel for Land Cruiser 80 Series Snorkel 1991-1997
- Suits Toyota Land Cruiser 80 Series 1991-1997 and Lexus LX450
- Relocates Your Engine’s Air Intake Point to a Higher Location
- Crosslinked Polyethylene Construction
- Built to Perform in Extreme Weather Conditions
- Comes With Stainless Steel and Plated Hardware
- Bolt-On Installation; Drilling Is Required
- Supported by a 2-Year Warranty
- Fully Designed and Manufactured in Australia
- Designed and manufactured in Australia
- Requires cutting and drilling of the fender and A-pillar. Full instructions and template provided.
- We also offer the Dobinsons Snorkel
(23 reviews) -
Skid PlatesFREE SHIPPING
within 48 US StatesARB 5421100 Skid Plate Kit | Toyota 4Runner 5th Gen (no KDSS) 2010-2024
- Suits all Toyota 4Runner 5th Gen models from 2010 to 2024 WITHOUT KDSS
- You must check to make sure you don’t have KDSS before ordering this kit
- 3mm pressed and folded sheet steel adds more strength than a standard folded sheet.
- Laser cut sheet steel.
- Zinc plated and powder coated with a silver textured finish.
- Recessed mounting bolts are protected and easy to remove for vehicle servicing.
- The Under Vehicle Protection will fit with or without an ARB front bumper. Fitment has not been confirmed with other aftermarket bumper designs
- Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
- See more details below as well as product video
(7 reviews) -
ARB
ARB 10000011 – ARB Speedy Seal Tire Repair Kit
- Easily and Quickly repair a tire without removing it from the vehicle
- Lubricant for easier tool insertion
- Additional valve accessories (valve core tool, spare valves and valve caps)
- 40 self vulcanizing repair cords for complete air sealing
- Allen key
- Blade to cut off excess cord
- Tire gauge
- Pliers to remove object that caused the hole
- Heavy Duty Insertion tool
- Heavy Duty Reamer tool
(7 reviews) -
Gladiator JT (2020-2025+)
Jeep Wrangler JL & Gladiator Rubicon Rear Diff Cover by ARB
- Suits Jeep Gladiator JT and Wrangler JL 2-door and 4-door models with Dana 44 Rubicon Rear Axle
- ONLY FOR RUBICON MODELS
- High-tensile nodular iron structure protects differential and ring and pinion set from obstacles
- Computer-optimized, cross-brace design within the differential cover increases the structural rigidity of the axle acting as a truss
- Approach/departure angle optimized by angled exterior surface
- Prolonged carrier bearing life due to extra support to the bearing alignment
- Additional housing strength helps keep the ring and pinion gears meshing on the flat faces of the teeth, extending ring and pinion life and overall maximum load strength
- Magnet in the end of the dipstick allows the oil to be checked for tell-tale signs of internal damage without removing the cover or draining the oil
- Low profile drain plug design resists damage from obstacles
- Combination of the high-filler point and dipstick allows the oil to be checked for water contamination without having to drain the oil
- Unique dipstick/filler cap design allows differential oil level to be adjusted for customized high driveline angles
- Cover is powder coated, CNC machined, and clear-coated for a durable, professional, long-lasting finish; all hardware is hardened and plated
- Tensile-cap screws (supplied) are recessed for protection against obstacles which might damage or loosen the screws
- Made in Red or Black, choose below
(3 reviews) -
Differential | DrivetrainFREE SHIPPING
within 48 US StatesARB RD129 Rear Air Locker Toyota 8.4″ 30 Spline
- For Use only with Toyota 8.4″ 12 Bolt 30 spline Rear Axle
- Suits multiple vehicles, the full list is down below. Used in older Tacoma, Sequoia, Tundra and T100 Trucks.
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.Â
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(16 reviews) -
Differential | DrivetrainFREE SHIPPING
within 48 US StatesARB RD146 Rear Tundra Air Locker 5.7L V8 10.5″
- For Use only with Toyota Tundra 5.7L V8 REAR 2007 to 2021 with 10.5″ 12 Bolt Ring Gear and 36 spline axles
- Will not suit 4.6L or 4.7L engines, as they use a smaller rear differential (RD152)
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.Â
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(11 reviews) -
Skid PlatesFREE SHIPPING
within 48 US StatesARB 5421110 Under Vehicle Protection Kit | Toyota 4Runner 5th Gen (with KDSS) 2010-2024
- Suits all Toyota 4Runner 5th Gen models from 2010 to 2024 WITH KDSS
- You must check to make sure you have KDSS before ordering this kit
- 3mm pressed and folded sheet steel adds more strength than a standard folded sheet.
- Laser cut sheet steel.
- Zinc plated and powder coated with a silver textured finish.
- Recessed mounting bolts are protected and easy to remove for vehicle servicing.
- The Under Vehicle Protection will fit with or without an ARB front bumper. Fitment has not been confirmed with other aftermarket bumper designs
- Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
- See more details below as well as product video
(9 reviews) -
Skid PlatesFREE SHIPPING
within 48 US StatesARB 5423010 Toyota Tacoma Skid Plate Set | 2005-2023 4×4
- Suits all Toyota Tacoma 4×4 models from 2005 to 2023 (2nd and 3rd Gen)
- 3mm pressed and folded sheet steel adds more strength than a standard folded sheet.
- Laser cut sheet steel.
- Zinc plated and powder coated with a silver textured finish.
- Recessed mounting bolts are protected and easy to remove for vehicle servicing.
- The Under Vehicle Protection will fit with or without an ARB front bumper. Fitment has not been confirmed with other aftermarket bumper designs
- Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
- See more details below as well as product video
(11 reviews) -
-
ARB
ARB715LB Orange Snatch Strap Recovery 30′ x 4 1/3″ (33000 LB)
- A snatch strap is a Kinetic strap that stores energy to magnify the pulling power during a vehicle recovery
- Min. breaking strength: 15,000kg / 33,000 lb Specifically designed to stretch under load for maximum performance
- An ARB snatch strap is a very effective method of extracting a bogged or immobilized 4wd when a second vehicle is present
- Length: 9m / 30 feet. Width: 110mm / 4 1/3″Â
- Material: 100 percent nylon, Elasticity: Stretch (genuine) 20 percent. The kinetic energy generated by the elasticity aids with the recovery itself, while at the same time reducing the likelihood of vehicle damage.
- Reinforced Eyes. For vehicle recovery, a snatch strap is more suitable than a tow strap.
- All ARB snatch straps are woven and fabricated to ARB specifications, and tested by a NATA approved laboratory
- Part no. ARB715LB
- Min. breaking strength: 15,000kg / 33,000 lb
- Length: 9m / 30 feet
- Width: 110mm / 4 1/3″
- Elasticity: Stretch (genuine) 20%
- Material: 100% nylon
- Reinforced eyes: yes
- Eye & seam protector sleeves: yes
(12 reviews) -
ARB
ARB505 E-Z Deflator Kit 10-60 PSI Rapid Air Down Offroad Kit
- Corrosion resistant brass/stainless deflator tool
- Fully geared, solid brass precision movement
- Protective rubber gauge guard
- Easy to read dial with one PSI increments
- Includes updated canvas pouch for storage
- Original analog design, newer digital version is now also offered
(10 reviews) -
SnorkelFREE SHIPPING
within 48 US StatesSafari Tacoma Snorkel SS171HP – Tacoma 2nd Gen 2005-2015
- Suits Toyota Tacoma 2005-2015 Models – 2nd Gen Tacoma
- Raises air intake to prevent water ingestion, while also allowing vehicles to utilize clean air when driving in dusty conditions.
- Vehicle specific design and factory airbox adaption fitment.
- Manufactured using durable, UV stable cross linked polyethylene material.
- Supplied as a comprehensive kit, including the necessary fasteners and mounting brackets.
- Unique air ram design acts as a highly efficient water separator to remove rain water form incoming air stream.
- Designed and manufactured in Australia
- 10% higher CFM for this application over other brand snorkels, due to large body design
- Requires cutting and drilling of the fender and A-pillar. Full instructions and template provided.
(25 reviews) -
Air CompressorsFREE SHIPPING
within 48 US StatesARB CKMTA24 24V High Performance Twin Air Compressor
- Motors are water sealed, 100% ball bearing equipped (i.e. no bushings), and feature a unique linear brush pre-load system for extra long life, low heat and quiet operation throughout the life of the unit.
- Compact twin motor, dual cylinder design makes it the highest flowing compressor in its class (voltage vs. size). Highest air flow rate of any 24 Volt air compressor of its size on the market at 174LPM [6.16CFM].
- Full wiring loom included for simplified installation and easy plug-in connectivity to Air Locker control solenoids. (Note: Air Locker Manifold Kit #171503 required to mount solenoids).
- Motors are internally thermal protected against extreme temperature damage. Over-pressure safety valve equipped. Equipped with dual heavy duty Maxi-Fuses for professional in-line circuit protection and true circuit redundancy in case of a fault.
- Compressor pistons are equipped with a heavy duty European made cylindrical roller bearing. Hard-anodized cylinder bores and PTFE (Teflon) impregnated carbon fibre piston seals for reduced friction and maximum trouble free life.
- 24V, Draws 25.2 Amps, 6.16 CFM, 150 PSI max, 100% Duty Cycle
- 10.9 x 7.5 x 4.1 inches actual dimensions, 19.4 LBS with all items included
(7 reviews) -
Differential | DrivetrainFREE SHIPPING
within 48 US StatesARB RD151 Front Tundra Air Locker 5.7L V8 8″
- For Use with Toyota Tundra 5.7L V8 front 2007 to 2021 with 8″ 34 spline axles
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.Â
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(11 reviews) -
SnorkelFREE SHIPPING
within 48 US StatesSafari Snorkel for Toyota FJ Cruiser Snorkel 2010-2016
- Suits Toyota FJ Cruiser 2010-2016
- Safari V-Spec Snorkel
- Relocates Your Engine’s Air Intake Point to a Higher Location
- Crosslinked Polyethylene Construction
- Built to Perform in Extreme Weather Conditions
- Comes With Stainless Steel and Plated Hardware
- Bolt-On Installation; Drilling Is Required
- Supported by a 2-Year Warranty
- Fully Designed and Manufactured in Australia
- Designed and manufactured in Australia
- Requires cutting and drilling of the fender and A-pillar. Full instructions and template provided.
(20 reviews) -
Safari Snorkel
Safari Snorkel SS1080HF for Jeep Gladiator and JL Wrangler
- Suits Jeep Wrangler JL and Gladiator JT with the 2.0L or 3.6L gas engines. Does not suit diesel or any other variant
- Relocates Air Intake Above Windshield
- Reinforces Performance in Extreme Conditions
- Crafted from Tough and Lightweight, UV Protected Polyethylene
- Connection Ducts Made of EPDM Molded Rubber
- With High-Flow Air Duct
- Uses High-Grade Stainless Steel Hardware
- CAD-Engineered for a Precise Fit
- Installation Requires Modifications
- Requires cutting and drilling of the exterior body parts (hood)
- Ties into Factory Air Box
- Carries a 3-Year Limited Warranty
- Made in Australia
(24 reviews) -
Fridge/FreezersFREE SHIPPING
within 48 US StatesARB Classic Series II 50 Qt. Fridge Freezer (Grey/Black) – 10801472
- Capacity: 50 Quart (72 x 12 oz cans)
- External Dimensions: 20in(H) x 15in(W) x 27.8in(D)
- Internal Dimensions: Fruit & Dairy Compartment: 8.1in (H) x 11.2in(W) x 6in(D).  Main Compartment: 15.5in(H) x 11.2in(W) x 13.3in(D)
- Weight: 53lbs
- Cooling Capacity: 50°F to 0°F
- Power: Built-in 12/24V DC and 100-240V AC power. Integrated battery protection system
- Current Draw: 0.87 amps/hour*. *Average power consumption tested at 37.4°F cabinet temperature, 78.8°F-87.8°F ambient temperature range, test duration of 66 hours and supply voltage of 12V DC
- Transmitting module: Bluetooth connectivity allows 2-way communication on SII fridges and 1-way display on SI fridges
- Warranty: Three year warranty from date of purchase
- Gun-metal grey with black highlights
- Removable lid with integrated seal
- Backlit, dimmable LED control panel with temperature display
- Bluetooth transmitter allows full-control and monitoring with free iOS and Android apps
- Receive an alert when someone leaves the lid open
- Rear-facing internal cabinet LED light with magnetic switch
- Durable, Secop compressor with smart electronic control system
- Tough powder coated steel outer casing
- Separate compartment for fruit and dairy products
- Durable detent hinge
- Integrated 3-stage battery protection system
- Rubber feet
- Strong, recessed steel carry handles
- Reversible basket with divider
- Convenient drain plug for simple cleaning
- Integrated evaporator
(7 reviews) -
Fridge/FreezersFREE SHIPPING
within 48 US StatesARB Fridge Freezer Classic Series II 37 Qt (Grey/Black) – 10801352
- Capacity: 37 Quart (50 x 12oz cans)
- External Dimensions: 16.9in(H) x 15in(W) x 27.8in(D)
- Internal Dimensions: Fruit & Dairy Compartment: 5in(H) x 11.2in(W) x 6in(D).  Main Compartment: 12.6in(H) x11.2in(W) x 13.3in(D)
- Weight: 45.6lbs
- Cooling Capacity: 50°F to 0°F
- Power: Built-in 12/24V DC and 100-240V AC power. Integrated battery protection system
- Current Draw: 0.85 amps/hour*. *Average power consumption tested at 37.4°F cabinet temperature, 78.8°F-87.8°F ambient temperature range, test duration of 66 hours and supply voltage of 12V DC
- Transmitting module: Bluetooth connectivity allows 2-way communication on SII fridges and 1-way display on SI fridges
- Warranty: Three year warranty from date of purchase
- Gun-metal grey with black highlights
- Removable lid with integrated seal
- Backlit, dimmable LED control panel with temperature display
- Bluetooth transmitter allows full-control and monitoring with free iOS and Android apps
- Receive an alert when someone leaves the lid open
- Rear-facing internal cabinet LED light with magnetic switch
- Durable, Secop compressor with smart electronic control system
- Tough powder coated steel outer casing
- Separate compartment for fruit and dairy products
- Durable detent hinge
- Integrated 3-stage battery protection system
- Rubber feet
- Strong, recessed steel carry handles
- Reversible basket with divider
- Convenient drain plug for simple cleaning
- Integrated evaporator
(6 reviews) -
60 62 Series Land Cruiser (1980-1989)
ARB 3410100 Toyota 60 Series Land Cruiser Front Winch Bumper
- Suits all Toyota Landcruiser 60 and 62 Series models from 1980 to 1989
- Enhances the look of the 60 Series or 62 Series as well as providing awesome protection against animal strikes or rear end accidents
- Full width single piece steel welded bumper, includes all mounting hardware
- Compatible with a range of low mount winches without an integrated solenoid pack
- Includes driving light mounts as well as CB antenna mounts, welded in place
- Durable black powder coat finish
- Includes recessed turn signals in the bumper that you can wire into your OEM harness for additional visibility
- Not as heavy as it looks, just over 100lbs out of the packaging
- Ships by truck freight – we will be in touch with you about shipping details
- Fitment of Warn XD9000 & M8000 winch requires special spacer kit – ARB part no. 3500050.
- Best suited to a 10k or 12k low-mount winch, due to overall truck weight and size
- We offer a large variety of Winches as well
(2 reviews)
