Your cart is currently empty!
Shop
Showing 1711–1740 of 2179 resultsSorted by popularity
-
Trail-GearFREE SHIPPING
within 48 US StatesTrail-Creeper 3:1 Sidekick / Tracker / Vitara Transfer Case Gears
- Suits 1991 to 1998 Suzuki Sidekick 4WD, 1991-2001 Geo Tracker 4WD, 1991-2001 Chevy Tracker 4WD, 1995-1997 Suzuki X-90 4WD, 1999-2001 Suzuki Vitara 4WD
- High Quality Materials
- Precision fitting spline fit for long life
- 72% gear reduction for more power and control on the trail
- Made out of Japanese SCM415 alloy for its greater strength and wear resistance
- SCM415 outperforms the 8620 material in yield and ultimate tensile strength
- High Quality Materials
- Precision fitting spline fit for long life
- Includes Trail-Safe input and output seals
- Installation Instructions (and video down below)
(9 reviews) -
Trail-GearFREE SHIPPING
within 48 US StatesTrail-Creeper 4.24 Sidekick / Tracker / Vitara Transfer Case Gears
- Suits 1991 to 1998 Suzuki Sidekick 4WD, 1991-2001 Geo Tracker 4WD, 1991-2001 Chevy Tracker 4WD, 1995-1997 Suzuki X-90 4WD, 1999-2001 Suzuki Vitara 4WD
- High Quality Materials
- Precision fitting spline fit for long life
- 135% gear reduction for more power and control on the trail
- Made out of Japanese SCM415 alloy for its greater strength and wear resistance
- SCM415 outperforms the 8620 material in yield and ultimate tensile strength
- High Quality Materials
- Precision fitting spline fit for long life
- Includes Trail-Safe input and output seals
- Installation Instructions (and video down below)
(9 reviews) -
Trail-Gear
Suzuki Rear Axle Bearing Kit – Sidekick & Tracker
- Suits 1989 to 1998 Suzuki Sidekick, Geo Tracker and Chevy Tracker with 4-bolt style axles
- Genuine Koyo brand bearing with integral spacer
- Ground bearing retainer
- OEM quality Inner Rear Axle Wheel Seal
- OEM quality Outer Rear Axle Wheel Seal
- Note: This kit will rebuild one side of your rear axle. To rebuild an entire rear axle, you will need to order two kits
(9 reviews) -
Trail-Gear
Longfield Chromo Suzuki Rear Axle Shafts Pair for Sidekick & Tracker
- Suits 1989 to 1998 Suzuki Sidekick, Geo Tracker and Chevy Tracker with 4-bolt style axles
- Forged & heat-treated 4340 chromoly steel rear axle shafts – 120° of twist
- Includes set of (1) long side & (1) short side rear axle shafts, new axle studs and Longfield™ axle decals
- 26 spline ends, same as OEM
- Ideal for use with lockers to prevent snapped axle shafts
- Installation Instructions
- Note: Axles are 4-bolt style. Check your axles before ordering. If you have 5-bolt style axles, you will need to obtain early model brake backing plates (not included) in order to use these axles on your vehicle.
- Here is the new wheel bearing and seal kit to go with these axle shafts – order 2 per vehicle
(9 reviews) -
Tacoma 1st Gen (1996-2004)
Tacoma 2.7L Exhaust Header – 1995-1998 Toyota Tacoma 2.7L 4 Cylinder
- Suits Toyota Tacoma 2.7L 4 Cylinder from 1995 to 1998
- Polished, 1/16” thick stainless steel tubes going into a ½” thick header-to-head mounting flange
- TIG welded and polished
- Comes with all gaskets and hardware
- Stainless steel full-band exhaust clamp
- Smog legal in California, making it legal in all 50 states
- Installation Instructions
(9 reviews) -
Exhaust
Suzuki Exhaust Header – Samurai and Sidekick – 1.3L 1.6L 8V Engines
- Suits Suzuki Samurai, Suzuki Sidekick, and Geo Tracker with the 1.3L or 1.6L 8V Engines (will not suit 16V)
- Manufactured by one of the best header manufacturers in the world
- 3/8″ thick port matched head flange matches the Suzuki’s rectangular exhaust ports
- Every tube is CNC Mandrel bent to ensure maximum flow from each header pipe
- TIG welded fully stainless steel exhaust header is designed for a long service life
- OEM Style Header Gasket
- Squared at header flange to match head port
- EGR Passage tube welded into header
- O2 Sensor Port located at lower collector
- Minor welding is required to connect the collector into the factory exhaust system
- NOTE: This header is not smog legal in California and is for off-road use only in California. For all other states, check all applicable laws before ordering
(6 reviews) -
MRR 3-Way Adjustable Remote ResiFREE SHIPPING
within 48 US StatesDobinsons 2.6″ MRR 3-Way Adjustable Front Long Travel Coilovers Pair | Toyota & Lexus
- Dobinsons Long Travel Coilovers for the front of Toyota and Lexus Trucks and SUV’s
- Intended to be used on 4th and 5th Gen 4Runners, Lexus GX470 and GX460, FJ Cruisers, and Toyota Tacoma 2nd and 3rd Gens – with all Long Travel Parts Installed (upper and lower arms, axles, custom bump stops, limit straps, etc)
- Includes Different bolt pattern adapters for Top mount plate
- Specifications: 602mm (23.7″) extended, 399 mm (15.7″) compressed, uses 1.5″ long x 1/2″ Bolt for lower mounting
- Lower mount bushing is 1.5″ (38mm) wide with a 1/2″ (13mm) diameter hole
- Pair of Coilover Struts only, no coils included
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Height adjustable with a fully threaded body
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Does not include coil springs – sold separately
- These can only be run with aftermarket UCA’s for coilover clearance and full long travel lower arms – they will not work with OEM sized upper or lower arms
- Recommended Coils to run with these:
- C92-3016550 | Inner Diameter – 3.0″ | Length – 16″ | Spring Rate – 550lb/in
- C92-3016600 | Inner Diameter – 3.0″ | Length – 16″ | Spring Rate – 600lb/in
- C92-3016650 | Inner Diameter – 3.0″ | Length – 16″ | Spring Rate – 650lb/in
(9 reviews) -
Suspension
Dobinsons Jeep JL JT Front Track Bar Axle Bracket Kit (3–4.5” Lift)
- Suits Jeep Wrangler JL and Gladiator JT with 3.0-4.5″ of Lift
- The Dobinsons Jeep JL/JT Front Track Bar Axle Bracket Kit corrects vehicle roll center
- Corrects steering geometry eliminating bump steer and other front-end issues
- Restores factory handling
- Prevents Coil Bowing
- Reduces body roll on lifted JL Wrangler/Unlimited and Gladiator models
- Bolt-on bracket mounts to the front axle
- Black Powder Coat finish
- Drilling is required
(9 reviews) -
Dirt King FabricationFREE SHIPPING
within 48 US StatesDirt King Tacoma Shock Relocation Kit | 2005-2023 Tacoma
- Suits 2WD and 4WD 6-Lug 2005-2023 Toyota Tacoma models
- Shocks mounted in the factory location typically measure 2.5″ x 8″, the Dirt King relocation kit is designed to accommodate for 2.5″ x 12″ shocks – like These
- Includes left and right hand sides and all hardware (welding required)
- All metal is shipped raw, as it requires welding – you paint when it’s all done
- Rear shock mounts
- Shock tabs
- Shock tab gussets
- Low profile wrench
- Reservoir mounts
- Grade 8 mounting hardware
- Dirt King sticker pack
- Installation Instructions
- Suitable with Dobinsons 12″ Travel Smoothie MRA Shocks
(4 reviews) -
Sale!RCI Off Road
RCI Rear Tacoma Diff Skid Plate | Non-Hybrid | 2024+ Tacoma
- Suits Toyota Tacoma 2024+ Non-Hybrid
- Protects the low hanging rear differential
- Clamps directly to axle housing for an easy no drill install
- Hugs differential tightly, within 1/4″ for minimal loss in ground clearance.
- Black powder coated for rust resistant, durable and high quality finish
- Design incorporates drain holes for water and dirt to escape, as well as allow full access to the differential drain plug
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- MADE IN THE USA
(0 reviews) -
Sale!Skid Plates
Rear Shock Mount Skids | 2024+ Tacoma
- Includes one pair of shock mount skid plates (Driver/Passenger)
- Protects low hanging shock mounts on 2024 Tacoma models
- Includes all hardware for installation
- Product includes a heavy duty black powder coat finish
- Made of 3/16″ Steel
- Compatibility confirmed with TRD-Offroad OEM Bilstein shocks and King aftermarket stocks. Designed for compatibility with all OEM shock options (Trailhunter OEM OME shocks, TRD PRO OEM FOX, shocks, Prerunner OEM Tokicos shocks, TRD Sport OEM shocks
- Made in USA
(2 reviews) -
Sale!Tacoma 4th Gen (2024-2025+)
RCI Aluminum Tacoma Roof Rack | 2024+ Tacoma
- RCI 4th Gen Toyota Tacoma Aluminum Roof Rack – suits 2024+ DUAL CAB models
- Only suits the dual cab models, will not suit access cabs
- Mount anything from lights, Hi-lift jacks, roof top tents, shower systems, Maxtrax, quick-fist, RotoPax, a spare tire, bike mounts, roof baskets, etc
- Heavy duty design will easily support roof top tents and heavy gear
- 1/4″ 5052 aluminum laser cut side panels and rear fairing. 1″x 2″ black anodized aluminum T-slot cross-bars. 1/8″ 5052 aluminum front fairing
- All aluminum components undergo a CNC deburring process to eliminate sharp edges for a high end, finished appearance
- T-Slot comes machined to accept nut plates and carriage bolts to simplify installation of accessories without ever having to remove bars
- Front wind fairing matches the contour of the roof and windshield for a superior fit and finish and improved aerodynamics
- Includes rubber trim and all necessary hardware for installation
- Our rack is features injection molded rubber mounting blocks that lift and cushion the roof rack mounting feet AND completely seal out moisture without the need for silicone!
- Built in side panel slots allow unlimited options for adding accessories such as handles, side lighting, awning mounts, and more
- Entirely bolt on design utilizes existing roof rack mounting holes
- Rack is only 1.75″ above highest point of the truck (not including antenna)
- Does NOT require the removal or alteration of roof antenna
- Industry standard T-slot cross-bars are compatible with hundreds of accessories
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer for an exponentially more durable finish
- Includes black stainless steel hardware, and trim. We don’t charge extra for high quality hardware
- Easy bolt together assembly, takes about 45 minutes to install
- All hardware and installation instructions provided
- Weighs approximately 39lbs
- Installation Guide
- Made in the USA
(0 reviews) -
Tacoma 4th Gen (2024-2025+)FREE SHIPPING
within 48 US StatesIcon 2024 Toyota Tacoma Coilovers – 2.5″ VS Remote Reservoir
- Suits 2024+ Toyota Tacoma
- Sold as a Pair
- Vehicle specific tuned for superior shock damping, vehicle control, and improved ride quality over stock
- Vehicle specific shock length and pairing with front differential drop yields maximum wheel travel
- Height-adjustable coilovers offer 1.25-3″ of lift height adjustment over stock
- 2.5″ diameter shock bodies with remote reservoirs
- Remote reservoirs maintain cooler operating temperatures during extended off-road use
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock bodies with 7/8″ diameter shafts
- FK rod end bearings for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
- APPLICATION NOTE #169: 4WD models require front differential drop part # 55160
- Matching Rear shocks are on this page
- Photos for Illustration Purposes Only
(0 reviews) -
Tacoma 4th Gen (2024-2025+)FREE SHIPPING
within 48 US StatesIcon 2024 Tacoma Rear Shocks 0-1″ Lift VS 2.5 Aluminum – Remote Reservoir Pair
- Suits 2024+ Toyota Tacoma with 0-1″ of lift with coil spring rear end
- Will not fit 2024 Toyota Tacoma TRD PreRunner
- Sold as a Pair – order 1 for 1 vehicle
- ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
- Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
- One-piece, hard anodized, impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with remote reservoir
- One-piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- All ICON 2.5 Series Piggyback and Remote Reservoir shocks can be upgraded to ICON’s Compression Damping Control Valve (CDCV)
- 7/8” diameter induction hardened, chrome plated shock shaft
- Rubber dust boot included for added shaft protection
- PTFE lined spherical bearings and application specific mounting hardware
- 6061 aircraft grade aluminum CNC machined components
- Fully rebuildable and re-tunable
- Includes resi mounts and hardware
- Photo for illustration purposes only
(0 reviews) -
Tacoma 4th Gen (2024-2025+)FREE SHIPPING
within 48 US StatesIcon 2024 Tacoma Rear Shock 0-1″ Lift VS 2.0 Aluminum – Remote Reservoir
- Suits 2024+ Toyota Tacoma with 0-1″ of lift with coil spring rear end
- Will not fit 2024 Toyota Tacoma TRD PreRunner
- Sold Individually – order 2 for 1 vehicle
- Nitrogen charged monotube design with remote reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- Remote reservoirs maintain cooler operating temperatures during extended off-road use
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrile rubber top out bumper for noise free operation
- Rubber dust boot included for added shaft protection
- Fully rebuildable and re-tunable
- Photo for illustration purposes only
(0 reviews) -
Tacoma 4th Gen (2024-2025+)FREE SHIPPING
within 48 US StatesIcon 2024 Tacoma Rear Shock 0-1″ Lift VS 2.0 Aluminum – Internal Reservoir
- Suits 2024+ Toyota Tacoma with 0-1″ of lift with coil spring rear end
- Will not fit 2024 Toyota Tacoma TRD PreRunner
- Sold Individually – order 2 for 1 vehicle
- Nitrogen charged monotube design with internal reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrile rubber top out bumper for noise free operation
- Rubber dust boot included for added shaft protection
- Fully rebuildable and re-tunable
- Photo for illustration purposes only
(0 reviews) -
Tacoma 4th Gen (2024-2025+)FREE SHIPPING
within 48 US StatesIcon 2024 Toyota Tacoma Coilovers – 2.5″ VS Internal Reservoir
- Suits 2024+ Toyota Tacoma
- Sold as a Pair
- Vehicle specific tuned for superior shock damping, vehicle control, and improved ride quality over stock
- Vehicle specific shock length and pairing with front differential drop yields maximum wheel travel
- Height-adjustable coilovers offer 1.25-3″ of lift height adjustment over stock
- 2.5″ diameter shock bodies with internal reservoirs for consistent performance
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock bodies with 7/8″ diameter shafts
- FK rod end bearings for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
- APPLICATION NOTE #169: 4WD models require front differential drop part # 55160
- Rear shocks are on this page
- Photos for Illustration Purposes Only
(0 reviews) -
Rooftop Tents
OVS XD Lohtse Clamshell Aluminum Roof Top Tent Hard Shell
Introducing the Overland Vehicle Systems XD Lohtse Clamshell Aluminum Hard Shell Roof Top Tent – a revolution in rooftop camping that combines cutting-edge design and unmatched versatility. This exceptional tent is engineered to redefine your outdoor adventures, providing a comfortable and convenient home on the road.
- Base Material: Black Aluminum
- Body: 320G Rip Stop Poly Cotton
- Window Screens: 120G Environmental Fadeless Breathable Gaze
- Mattress: 2.0” High Density Foam
- Anticondensation Mat: Yes
- Base: Black Aluminum Smooth Base
Dimensions
- Closed Dimensions: 84” x 52” x 8”
- Open Dimensions: 84” x 52” x 57”
- Sleeping Area: 76” x 44.5”
Additional Information
- Sleeping Count: 2
- Weight: 210 lbs.
- Packaged Weight: TBA
- Hardware Included: Yes
- Storage Rack Included: Yes
- Struts: 2x Nitrogen Gas Charged Struts
- Pull Down Strap: TBA
- Handles: Heavy-Duty Nylon
- Seal: Military Specked Waterproof Grade
- Set Up: 2 Minutes
- Put Away: 2 Minutes
- Storage: Enough Interior Space to Store Bedding When Closed
(3 reviews) -
4Runner 5th Gen (2010-2024)FREE SHIPPING
within 48 US StatesDobinsons 3″ Long Travel Toyota 4Runner IMS Suspension Kit for 2010-24
- Suits Toyota 4Runner 5th Gen 4×4 from 2010 to 2024, without KDSS only
- Extended Travel front struts and Long Travel Rear shocks along with all related components are listed on this page
- Maximize the suspension travel of your Toyota 4Runner for the most flex and travel you can get from bolt-on parts
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Lifting 3″ front and rear maintains factory rake
- Dobinsons have the largest selection of front and rear coils for 4Runners and in multiple colors
- Add up how much accessory weight you have on the front and then the rear, that’s your constant load
- Then choose the lift height from the coils that most closely matches the added weight
- Fully rebuildable and re-valvable shocks and struts
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Option to have the front struts preassembled prior to shipping to make installation easier at home
- You choose what options you want, nothing is provided if it is not listed once you have selected it
- Suspension Installation Video
- Lift heights are based on the standard 20″ front and 22″ rear, measured from the center of the hub up to the fender edge. Many vehicles come in at different heights from the factory based on trim levels and options
(5 reviews) -
Sale!Tacoma 4th Gen (2024-2025+)
2024+ Tacoma Transfer Case Skid Plate from RCI
- For 2024+ Toyota Tacoma 4th Gen
- Protects third cross-member, transfer-case, and exhaust pipe
- Reinforced edges between cross-members for maximum strength and rigidity
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- All models include a heavy duty 3/16″ steel powder coated cross-member- aluminum option includes a powder coated steel cross-member
- Weights: 3/16″ Steel 24 LBS, 1/4″ Aluminum 12 LBS, Crossmember 15 LBS
- Verified to fit 4×4 TRD Offroad non-hybrid models. Suspected to fit other models, but not yet verified
- MADE IN LOVELAND, COLORADO, USA
(0 reviews) -
Sale!Tacoma 4th Gen (2024-2025+)
2024+ Tacoma Transmission Skid Plate from RCI
- For 2024+ Toyota Tacoma 4th Gen
- Protects transmission, second and third cross-members
- Service openings for maintenance without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Weights: 3/16″ Steel 38 LBS, 1/4″ Aluminum 17 LBS
- Direct bolt on addition to existing factory attachment points, no drilling required
- Verified to fit 4×4 TRD Offroad non-hybrid models. Suspected to fit other models, but not yet verified
- MADE IN LOVELAND, COLORADO, USA
(0 reviews) -
Sale!Tacoma 4th Gen (2024-2025+)
2024+ Tacoma Engine Skid Plate from RCI
- For 2024+ Toyota Tacoma 4th Gen
- Protects front two cross-members, low hanging front differential, and oil pan
- Service openings for easy service and oil changes without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Utilizes Center mounting points for maximum strength whether steel or aluminum
- Installs in minutes
- All hardware provided
- Weights: 3/16″ Steel 51 LBS, 1/4″ Aluminum 21 LBS
- Direct bolt on addition to existing factory attachment points, no drilling required
- Engine Skidplate requires the front crossmember below the radiator
- Verified to fit 4×4 TRD Offroad and TRD Pro Models
- If mounting to a Tacoma with out the factory front crossmember like TRD Sport, Limited or SR5 etc. you must add the additional Tacoma Front Skidplate Crossmember
- MADE IN LOVELAND, COLORADO, USA
(0 reviews) -
Full Suspension Kits - Frontier D40FREE SHIPPING
within 48 US StatesDobinsons Nissan Frontier D40 MRR 3-Way Adjustable Kit | 2005-2021
- Complete Dobinsons MRR 3-Way Adjustable Suspension Kit for your 2005-2021 Nissan Frontier D40 4×4 Truck
- Choose what front and rear lift heights and load ratings you would like
- Adjustable height front struts (requires coil to be compressed above the coil seat to adjust height)
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI CNC machined components for precise tolerances
- Parker Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile
- strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO 9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride
(5 reviews) -
Frontier D40 (2005-2021)FREE SHIPPING
within 48 US StatesDobinsons 2.5″ IMS Extended Travel QR Kit | Nissan Frontier D40 2005-2021
- Complete Dobinsons IMS Extended Travel Quick Ride Kit for your 2005-2021 Nissan Frontier D40 4×4 Truck
- Extended Travel Front Struts – these require new UCA’s to be run with them for proper coil clearance and travel
- Choose what rear lift heights and load ratings you would like
- The Quick Ride Kit is a block and U-bolt setup that keeps your stock leaf springs in place and easily adds lift with no negative effects
- Adjustable height front struts (requires coil to be compressed above the coil seat to adjust height)
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg, Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Front Extended Travel specs: 410mm extended, 278mm compressed
- Rear Shock specs: 560mm extended length, 375mm compressed
- Heights are based on a 4×4 Truck
- Choose 2.5″ lift up front and 1.25″ or 2″ lift in the rear
(5 reviews) -
Frontier D40 (2005-2021)FREE SHIPPING
within 48 US StatesDobinsons 2-2.5″ IMS QR Nissan Frontier Lift Kit | D40 2005-2021
- Complete Dobinsons IMS Quick Ride Kit for your 2005-2021 Nissan Frontier D40 4×4 Truck
- Choose what front and rear lift heights and load ratings you would like
- The Quick Ride Kit is a block and U-bolt setup that keeps your stock leaf springs in place and easily adds lift with no negative effects
- Adjustable height front struts (requires coil to be compressed above the coil seat to adjust height)
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg, Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Heights are based on a 4×4 Truck
- Choose from 2-2.5″ lift up front and 1.25″ or 2″ lift in the rear
(5 reviews) -
Pathfinder R53 (2021-2023)
Dobinsons C45-428 Front 30mm lift Coil Springs for Nissan Pathfinder 4×4 R53 – Pair
- C45-428 Front coils will lift 30mm (1.2″) over original height with stock weight on 2021-2023 Nissan Pathfinder R53 4×4 models
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Photo is not of actual coil springs for this vehicle
(16 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US StatesToyota Tacoma Overland Truck Bed Rack | 2005-2023
- Suits 2005 to 2023 Toyota Tacoma
- Rack hovers against the cab end of the bed and the sides
- Base price is bare steel
- Choose from 1/8” Thick Mild Steel (45 LBS) or 3/16” 5052 Aluminum (28 LBS)
- Choose from bare metal or powder coated
- Bed rack has mounting points for bungee cords/tie-down straps
- Designed to hold 4 8-gallon Action Packers
- Mounting points for Rotopax carriers
- Dimple died for extra strength
- CNC laser cut and formed
- Dimensions: 56.25” x 18.5”x3”
- Installation Instructions
- Photos show different versions of the same product type
- Made in the USA!!
(12 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US StatesToyota Tundra Overland Truck Bed Rack | 2007-2021
- Suits 2007 to 2021 Toyota Tundra
- Rack hovers against the cab end of the bed and the sides
- Base price is bare steel
- Choose from 1/8” Thick Mild Steel (56.5 LBS) or 3/16” 5052 Aluminum (37 LBS)
- Choose from bare metal or powder coated
- Bed rack has mounting points for bungee cords/tie-down straps
- Designed to hold 4 8-gallon Action Packers
- Mounting points for Rotopax carriers
- Dimple died for extra strength
- CNC laser cut and formed
- Dimensions: 62.38″x18.5″x3″
- Installation Instructions
- Photos show different versions of the same product type
- Made in the USA!!
(12 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US StatesToyota Tacoma Bed MOLLE Panel | 2005-2023
- Suits 2005-2023 Toyota Tacoma, short or long bed
- Adds an awesome mounting area against the back bed wall, below your back window, to attach all sorts of items to
- The panel can also be used to provide additional tie down locations for securing gear in the bed
- You will never run out of uses for this modular mounting panel
- Includes 11 Gauge Steel Molle Panel and Mounting Brackets
- Zinc Plated Mounting Hardware
- Panel has a Black Powder Coat Finish
- Compatible With or Without Factory Front Bed Accessory Bar
- .44” and .20”. Nominal Diameter Round Mounting Holes
- No Drilling is Required for Installation
- Finished in a durable black powder coat, ready to be used immediately!!
- Installation Instructions
- Short and Long Bed designs have different shapes and mounting holes, see photos to show the differences – they are not interchangeable
- Made in the USA!!
(10 reviews)
