“Icon Billet Rear Upper Trailing Arms Pair | Tundra Sequoia Tacoma LC250 GX550” has been added to your cart. Continue shopping
You may be interested in…
-
Steering UpgradesFREE SHIPPING
within 48 US StatesTax Return Sale, 5% off
Use Coupon TAXTIMERusty’s HD Aluminum Tie Rod Assembly | JL Wrangler + JT Gladiator
- Fits: 2018-Current Jeep JL Wrangler and 2020-Current Jeep JT Gladiator Models
- A tie rod is the steering component that connects one wheel to the other, and you adjust toe with this
- Massive 1.825″ 7075 SOLID Aluminum Tie Rod
- Adjustable forged ends are threaded for adjustment without removing the tie rod from the vehicle
- HD jam nuts
- Serrated Lock Washers
- The strongest JL/JT Tie Rod you can buy
- Complete assembly from one side to the other, nothing else needed
- INSTALLATION INSTRUCTIONS
- Built in Rainbow City, Alabama, USA
- Also made in a steel DOM version
(3 reviews) -
Upper Control ArmsFREE SHIPPING
within 48 US StatesDobinsons Billet Aluminum UCA’s Pair | 200 Series Land Cruiser 2008-2021
- Super strong billet aluminum front upper control arms (UCA’s)
- Suits 2008-2021 Toyota Land Cruiser 200 Series and Lexus LX570
- Complete kit for both left and right hand side
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- *Must reuse OEM Washers
- Installation Instructions
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
- Replacement Ball Joints can be ordered here
- Photos for illustration purposes
(8 reviews) -
Tundra 3rd Gen (2022-2025+)FREE SHIPPING
within 48 US StatesDobinsons Adjustable Rear Upper Trailing Arms Pair | WA59-571K
- Suits Toyota Tundra 2022-2025+, Sequoia 2023-2025+, Land Cruiser 250 Series 2024-2025+, and Tacoma 2024-2025+ and Lexus GX550 2024+
- Fully adjustable to properly set the length and pinion angle
-
On car adjustable with a left hand threaded side (Silver Nut) and a right hand threaded side (Gold Nut)
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- **Not suitable for vehicles with rear height sensors (attached to OEM arms)
- Trailing arms DO NOT have headlight adjustment bracket
- Instructions written down below in the description
(4 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons Tubular UCA Pair | Land Cruiser 200 Series + Lexus LX570 2008-2021
- Complete assembled kit for both left and right hand side, includes new ball joints, OE style rubber frame bushings, and washers
- These arms come fully assembled with the ball joints and bushings installed
- Has 3 degrees of caster built in, no adjustability or settings required
- Has more clearance around the ball joint than factory UCA’s for better tire clearance
- Made from HSLA (High Strength Low Alloy) Steel
- 5mm (0.2″) wall thickness
- Powder coated black
- Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
- Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Product Video
- Also sold without ball joints
- Replacement Ball Joints can be ordered here
(8 reviews) -
Rusty's Off RoadFREE SHIPPING
within 48 US StatesTax Return Sale, 5% off
Use Coupon TAXTIMERusty’s Adjustable Front Track Bar | JL Wrangler + JT Gladiator
- Fits: 2018-Current Jeep JL Wrangler and 2020-Current Jeep JT Gladiator Models with 2-5″ of lift
- The track bar centers the axle left to right on the vehicle, and adding lift causes the vehicle to be offset and not aligned correctly
- Constructed of 1.50″ x .250″ wall DOM tubing
- Has enough adjustment to accommodate a 2″ to 5″ lift
- Black powder coated and come with long-lasting heavy-duty polyurethane bushings on one end and a heim on the other
- Mounts using stock hardware and locations
- Built in Rainbow City, Alabama, USA
(10 reviews) -
Recovery
MAXTRAX MKII Mounting Pins (17mm bolts)
- Sold in a set of four, enough to mount one or two sets of MAXTRAX (two or four boards total).
- 17mm bolt length, see attached photo for description
- 40mm and 17mm refers to the length of bolt used to mount the pins- both the 40mm and 17mm pins will hold either one or two sets of MAXTRAX.
- Designed to mount to your MAXTRAX to wherever you can mount these pins on your vehicle
- M10 stainless bolt has a provision for a small padlock
- Please Note: Antiseize recommended on install
- SOLD AS A SET OF FOUR
(4 reviews) -
Sale!Control Arms - Tundra 2022+FREE SHIPPING
within 48 US StatesOn Sale All April !!!Icon Billet Rear Lower Trailing Arms Pair | 22+ Tundra 23+ Sequoia 24+ Tacoma
- Suits 2022-2025+ Tundra and 2023-2025+ Sequoia 4×4 Models and 2024-2025+ Tacoma
- On vehicle adjustment for different ride heights and pinion angles using ICON’s Double Adjuster System
- Vehicle specific, high clearance design for reduced link contact with obstacles
- Replaceable Nylon Rock Slider to protect the link from damage
- CNC machined 6061 aluminum construction
- Large FK Bearing JMX16T PTFE-lined rod ends
- Maintenance free, dual durometer bushings for maximum angularity and noise isolation
- Covered by ICON’s Limited Lifetime Warranty
- Installation Guide
- Warranty Info
(10 reviews) -
Sale!Upper Control ArmsFREE SHIPPING
within 48 US StatesOn Sale All April !!!Icon Tubular UCA DJ Pair for 07-21 Tundra + 08-22 Sequoia
- Suits 2007-2021 Tundra and 2008-2022 Sequoia 4×4 Models with 1.75+ of lift
- ICON Delta Joint
- 1026 DOM Steel Construction
- CNC Bent Tubing
- Serviceable Dual Stage Bushings
- CNC Machined Bushing Housings and Sleeves
- Built-In Caster Correction
- Black Semi-Gloss Powder Coat Finish
- Installation Guide
- Warranty Info
(10 reviews) -
Bronco (2021-2025+)FREE SHIPPING
within 48 US StatesDobinsons Adjustable Rear Lower Control Arms Pair | Bronco 2021+
- Suits all 2021-2025+ Ford Bronco (fullsize)
- Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
- Made from HSLA (High Strength Low Alloy) Steel
- 40mm OD and 6mm wall thickness with support brace
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then E-coated black, for the ultimate finish and protection
- Sold as a pair
- Photos for illustration purposes
(4 reviews) -
Steering UpgradesFREE SHIPPING
within 48 US StatesTax Return Sale, 5% off
Use Coupon TAXTIMERusty’s HD Tie Rod Assembly | JL Wrangler + JT Gladiator
- Fits: 2018-Current Jeep JL Wrangler and 2020-Current Jeep JT Gladiator Models
- A tie rod is the steering component that connects one wheel to the other, and you adjust toe with this
- Massive 1.75″ x 0.250-wall DOM tubing Tie Rod bar
- Adjustable forged ends are threaded for adjustment without removing the tie rod from the vehicle
- HD jam nuts
- Serrated Lock Washers
- The strongest JL/JT Tie Rod you can buy
- Complete assembly from one side to the other, nothing else needed
- INSTALLATION INSTRUCTIONS
- Built in Rainbow City, Alabama, USA
- Also made in an Aluminum version
(5 reviews) -
Recovery
MAXTRAX Flat Rack Mounts with T-Bolts
- Mount up to 4 Maxtrax (2 Pairs) with this kit, includes mounts, hardware and pins for the Maxtrax
- Designed to mount to your MAXTRAX to your vehicles roof platform or roof rack crossbars
- Can securely attach up to four MAXTRAX MKII (MTXMPS17), 4 MAXTRAX XTREME (MTXXMPS17), or a pair of each (MTXMPSX17)
- Provides 180mm of closer adjustment or 180mm of further apart adjustment from the mounting point of the Flat Racks
- Includes the mounting option of 4 x T-Bolts (Suitable for Rola Titan roof platform, roof platforms and roof rack crossbars from most popular Roof Rack Brands)
- SOLD IN PAIRS
(4 reviews) -
Steering UpgradesFREE SHIPPING
within 48 US StatesTax Return Sale, 5% off
Use Coupon TAXTIMERusty’s Front Track Bar Mount Brace | JL Wrangler + JT Gladiator
- Fits: 2018-Current Jeep JL Wrangler and 2020-Current Jeep JT Gladiator Models
- This is a brace that supports the mount between the steering box and the track bar bracket
- Constructed of 1/4-inch thick laser-cut steel
- CNC formed for an exact fit
- E-coated in black for durability and looks
- Includes Grade 8 hardware
- INSTALLATION INSTRUCTIONS
- Built in Rainbow City, Alabama, USA
(7 reviews)
Cart totals
| Subtotal | $7,800.13 |
|---|---|
| Shipping |
Shipping to FL. |
| Tax | $585.04 |
| Total | $8,385.17 |
