Your cart is currently empty!
Jeep
Showing 1–30 of 224 results
-
ZJ Grand Cherokee (1993-1998) (9)
-
XJ Cherokee (1984-2001) (14)
-
YJ Wrangler (1987-1995) (6)
-
TJ Wrangler (1996-2006) (30)
-
JK Wrangler (2007-2018) (50)
-
Gladiator JT (2020-2024+) (87)
-
JL Wrangler (2018-2024+) (98)
-
KL Cherokee (2014-2022) (Trailhawk) (10)
-
WJ Grand Cherokee (1999-2004) (1)
-
WK Grand Cherokee (2005-2010) (7)
-
WK2 Grand Cherokee (2011-2022) (9)
-
XH Commander (2006-2010) (7)
-
Sale!KL Cherokee (2014-2022) (Trailhawk)On Sale All November!!
Dobinsons GS29-430 Front Struts Pair | Jeep Cherokee KL 2014 to 2022
- Suits all models of the Jeep Cherokee KL including Trailhawk, Latitude and Sport
- Superior Designed Nitro Gas Shocks, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Dobinsons GS29-430 Specifications: 588mm extended, 381mm compressed, 51mm body size
(6 reviews) -
Sale!Gladiator JT (2020-2024+)
Jeep Gladiator Long Range Auxiliary Fuel Tank (17gal) 2020+ 3.6L V6
- Suits Jeep Gladiator JT Trucks from 2020 onwards with the 3.6L V6 Gas engine
- Not suitable for Diesel versions
- This is an additional tank that fits on the left side of the driveshaft, it holds 17 gallons, and uses a transfer pump to fill your main tank when you hit a switch
- 17 gallon capacity, fits on opposite side of OE gas tank for maximum clearance!!
- 17 gallons plus your original 22 gallon tank gives you a capacity of 39 gallons in total!!
- Tank fills using the OEM gas door and supplied parts
- Tank uses a transfer pump to fill the main tank, 2L per minute pump rate
- Exhaust modification required – exhaust needs to be replaced with aftermarket/custom or available LRA replacement exhaust kit listed below (tank goes where OE exhaust was routed). Exhaust kit components
- Fitting time – approximately 5.5 hours
- Part Number JGJTPA
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery fee below.
- This product can not be sold or shipped to residents in California, as it will not pass SMOG. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
(5 reviews) -
Sale!KL Cherokee (2014-2022) (Trailhawk)On Sale All November!!
Dobinsons C29-151 Rear Lifted Coils for 4X4 Jeep Cherokee KL 2014 to 2022 – Pair
- Trailhawk (AD2) lifts 1.0″ rear. Sport (AD1) models lift 2″ rear
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Can be used with Dobinsons heavy duty Twin-tube Nitrogas Struts
- Sold as a pair
- Powder coated in a long lasting black color
(5 reviews) -
Sale!KL Cherokee (2014-2022) (Trailhawk)On Sale All November!!
Dobinsons GS29-431B Rear Shocks Pair | Jeep Cherokee KL 2014 to 2022 Sport, Latitude and Trailhawk
- Vehicle Fitment: Jeep Cherokee KL Sport, Latitude and Trailhawk
- Superior Designed Nitro Gas Shocks, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- These shocks are painted BLACK
- Dobinsons GS29-431 Specifications: 718mm extended, 534mm compressed, 45mm body size
(6 reviews) -
Sale!JL Wrangler (2018-2024+)
Jeep Wrangler JL 4DR Long Range Auxiliary Fuel Tank (17gal) 2018+
- Suits Jeep Wrangler JL 4-Door Models from 2018 onwards with the 3.6L V6 Gas engine (will not fit 2-door models or Wranglers with the E-Torque option or Diesel engine, does NOT fit the 392 version)
- This is an additional tank that fits on the left side of the driveshaft, it holds 17 gallons, and uses a transfer pump to fill your main tank when you hit a switch
- 17 gallon capacity, fits on opposite side of OE gas tank for maximum clearance!!
- 17 gallons plus your original 21.5 gallon tank gives you a capacity of 38.5 gallons in total!!
- Tank fills using the OEM gas door and supplied parts
- Tank uses a transfer pump to fill the main tank, 2L per minute pump rate
- Fitting time – approximately 5 hours
- Part Number JWJLPA
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
(5 reviews) -
Sale!KL Cherokee (2014-2022) (Trailhawk)On Sale All November!!
Dobinsons C29-150 Front Coils for 4X4 Jeep Cherokee KL 2014 to 2022 – Pair
- Dobinsons C29-150 Trailhawk (AD2) lifts 1.25″ front. Sport (AD1) models lift 2″ front
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Can be used with Dobinsons heavy duty Twin-tube Nitrogas Struts
- Sold as a pair
- Powdercoated in a long lasting black color
(4 reviews) -
TJ Wrangler (1996-2006)FREE SHIPPING
within 48 US StatesKing 4WD Premium TJ Wrangler Soft Upper Door Windows Tinted
- Suits 1997-2006 Jeep Wrangler TJ 2-door soft top convertibles (and LJ Unlimited) with Factory Half Door and Soft Door Uppers
- Does not include any framework
- Includes left and right side windows
- Black Diamond Fabric with TINTED windows
- Black Diamond Fabric
- Specification: Two Layer 24oz Marine Grade – Waterproof
- Testing: CFFA, FMVSS & SAE Requirements
- Specification: UV Approved
- Testing: Accelerated Light Aging Test – 1000 Hours
- Window Glass
- Specification: 96g DOT Approved Pressed flexible vinyl, undistorted, won’t shrink or yellow
- Testing: CFFA, FMVSS & SAE Requirements
- Zippers
- Specification: Reinforced nylon self-correcting zippers
- Testing: 50,000 Cycle Test – No bind or drag
- Velcro
- Specification: Industrial Grade Fiber
- Testing: 150 kg (330 lbs.) per square inch
- Seams
- Specification: 135-gauge thread with heat sealed seams, 4-piece thread per inch
- Testing: CFFA, FMVSS & SAE Requirements
- Also available with Clear Windows (not tinted)
- We also sell a full soft top with replacement soft half door uppers as well, click for details
(7 reviews) -
Sale!KL Cherokee (2014-2022) (Trailhawk)On Sale All November!!
Dobinsons Cherokee Trailhawk Lift Kit for 4X4 Jeep KL 2014 to 2022 inc Sport + Latitude
- Trailhawk (AD2) lifts 1.25″ front and 1.0″ rear. Sport (AD1) models lift 2″ front, and 2″ rear.
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Superior Designed Nitro Gas Shocks, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs. Other new OEM components may be required during install.
- GS29-430 Jeep Cherokee KL Front Struts Installation Note
(11 reviews) -
Sale!On BackorderDobinsonsOn Sale All November!!
Dobinsons 15mm Polyurethane Coil Spacer (Single) PS29-4014
- Specifically suited to the Front and Rear of a Suzuki Sidekick, Geo Tracker or the front of a Jeep Cherokee XJ and Jeep TJ or LJ
- 15mm (0.6″) thick
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold individually, available front and rear for several vehicles
- Lasts longer than rubber
- Easy to add lift height for worn coils
- Photo for illustration purposes
(8 reviews) -
Performance Upgrades - JL WranglerFREE SHIPPING
within 48 US StatesZ Automotive Jeep Gladiator JT Wrangler 392/4XE Front Camera
- Grille mounted camera for Jeep Gladiator JT and Wrangler JL 4XE and 392 (see regular JL Camera Kit)
- Attaches to the front grille neatly and discretely as shown in the photo
- Requires a Tazer JL or Tazer JL Mini to activate the “cargo camera” input on your screen
- Works on the 8.4 Uconnect only
- If the Tazer JL / Mini is present, this camera input can be activated at any time, in any drive mode, and at any speed, as long as you want
- It makes a perfect trail camera as well as for parking.
- This is a high-quality standard definition (480i) camera
- Download Instructions
(7 reviews) -
AccessoriesFREE SHIPPING
within 48 US StatesZ Automotive Tazer JL Mini Programmer | Wrangler JL + Gladiator JT
- Fits All 2018-2023 Jeep Wrangler JL Models and 2018-2023 Jeep Gladiator JT Models
- Adjusts Your Jeep’s Performance After Modifications
- Features Can Be Accessed Using Dash Display, Using Steering Wheel Buttons to Navigate
- User-Friendly Design
- Two Categories of Features – Vehicle Settings and Live Functions (see full list below)
- Simple to Set Up
- Simple to adjust settings
- Covered by a 90-Day Warranty
- Some examples of features you can change:
- Adjust for gear ratio changes
- Adjust for tire size changes
- Enable/disable TPMS system if you’re running aftermarket wheels
- Enable backup camera when turn signals are activated
- Enable/disable Cargo Camera input (8.4 UConnect only)
- Optional front camera add-on for Jeep JL Wrangler and Gladiator/Wrangler 4XE/392 (Scroll down for specs)
- Installation Instructions and Manual Transmission Supplement
**Item is not returnable once opened. No electronic items sold at exitoffroad.com can be returned once opened.
(7 reviews) -
Sale!DobinsonsOn Sale All November!!
Dobinsons Extended Jeep JL JT Front Sway Bar Link Kit | Gladiator JT Wrangler JL
- Fits Jeep Gladiator JT 2020+ and Jeep Wrangler JL 2018+ 2-door and 4-door
- Recommended for a Jeep with 2″ of lift
- Required for a Jeep with 3″ of lift
- Heavy Duty design with high quality ball joint ends for long life
- Fits and installs the same as OEM, but with added length so that the stock sway bar still functions normally at a lifted height without reducing wheel travel
- Sold as a pair, enough for 1 vehicle
(6 reviews) -
Sale!WK2 Grand Cherokee (2011-2022)On Sale All November!!
Dobinsons IMS29-50742 Front IMS Struts Pair | Jeep Grand Cherokee WK2 2016-2022
- Fits Jeep Grand Cherokee WK2 from 2016-2022, where the sway bar attaches at the base of the strut
- Does not suit Quadralift vehicles (air ride suspension)
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- ****Coil seat should be set at 540mm(21.25″) from the strut bushing eye. Please check our instructions section or reach out if you have any questions. If done incorrectly you can damage the shocks, springs and vehicle.*****
- Struts only, sold as a pair – the coils are sold separately
(14 reviews) -
Sale!Roof Racks
RCI 12″ HD Low Profile Truck Bed Rack
- For Short Bed Trucks from 46-58″ in Bed Length
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier, Ford Ranger, Chevy Colorado, GMC Canyon, Ford F150, Toyota Tundra, etc
- Rack is 12″ tall from bed rail to top of rack
- Mount anything from lights, Hi-lift, co2, fire extinguisher, quick-fist, roto-pax, spare tire, roof top tent, etc
- This is our HD model, utilizing three cross-members spanning the truck bed, this rack is has the highest weight capacity and provides even weight distribution on the trucks bed side rails
- Built in mounting points allow unlimited options for adding accessories
- Bolts to inside of bed rails or can alternatively be mounted with optional “drill-free” clamps to mount like a truck topper (Not applicable when bolting to accessory rail systems)
- Rack is 12″ tall from bed rail to top of rack
- Adjustable width adapts to any truck bed from 54″ – 64″ width between the bed rails
- Three length options to fit any application from 5′ beds to 6’+
- Maintains very good visibility through the back window despite the low overall rack height
- Using this rack will minimize the aerodynamic drag normally associated with roof top tents by keeping it largely below the roof-line
- Slotted mounting points on top of rack accept nearly any roof top tent making mounting a breeze
- Includes TWO top braces, for unlimited accessory and tent mounting options
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer. This extra step is expensive and time consuming but ensures our paint job will outlast anything else in the industry!
- Easy bolt together assembly, takes about 45 minutes to install with only a few basic hand tools
- All hardware for installation is included
- Weights
- 5ft (46″) 86lbs
- 5ft6in(52″) 92lbs
- 6ft(58″) 96lbs
- Adjustable Bedrack Install Guide
- Made in Loveland, Colorado USA
(2 reviews) -
Sale!DobinsonsOn Sale All November!!
Dobinsons Rear 1/2″ Coil Spacers (Pair) Jeep Wrangler JL and Gladiator
- Suits 2018+ Jeep Wrangler JL 2-door and 4-door and 2020+ Jeep Gladiator JT
- Adds 1/2″ of lift height
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold in Pairs
- Lasts longer than rubber
- Easy to add lift height for worn coils or when added weight has squatted down the rear
(2 reviews) -
Sale!Gladiator JT (2020-2024+)On Sale All November!!
Dobinsons C29-245V Rear 2.0″ Lift Coils for Jeep Gladiator (880-1210LB Load) – Pair
- Suits 2020+ Jeep Gladiator JT Pickup Truck.
- Lifts 2.0″ with 880-1210LBS of constant weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Teal or Black
- Sold in Pairs
(7 reviews) -
Sale!Gladiator JT (2020-2024+)On Sale All November!!
Dobinsons C29-249VB Rear 3.0″ Lift Coils for Jeep Gladiator – Extra Heavy Load – Pair
- Suits 2020+ Jeep Gladiator JT Pickup Truck
- Lifts 3.0″ with 880-1210LBS rear end constant weight (bumper, camper, etc)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Black
- Sold as a Pair
(6 reviews) -
Sale!KL Cherokee (2014-2022) (Trailhawk)On Sale All November!!
Dobinsons C29-202 Front Coils for 4X4 Jeep Cherokee KL AD2 Trailhawk 2014 to 2022 – Pair
- Dobinsons C29-202 for Trailhawk (AD2) models, lifts the front 1.25″ over stock height with the added weight of a steel bumper and winch
- Do not order these coils if you do not have a steel bumper and winch installed, it will be over-lifted!!
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Can be used with Dobinsons heavy duty Twin-tube Nitrogas Struts
- Sold as a pair
- Powdercoated in a long lasting black color
- Required – these HD coils should only be used with Dobinsons heavy duty struts – HERE
(5 reviews) -
Sale!KL Cherokee (2014-2022) (Trailhawk)On Sale All November!!
Dobinsons C29-144 Front Coils for 4X4 Jeep Cherokee KL AD1 2014 to 2022 – Pair
- Dobinsons C29-144 for Sport (AD1) models, lifts the front 2″ over stock height
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Can be used with Dobinsons heavy duty Twin-tube Nitrogas Struts
- Sold as a pair
- Powdercoated in a long lasting black color
(5 reviews) -
Sale!WK2 Grand Cherokee (2011-2022)On Sale All November!!
Dobinsons IMS Lift Kit for Jeep Grand Cherokee WK2 for 2011-2022
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Will Not Suit Vehicles Equipped with Quadra-Lift
- Superior Designed IMS (Internal reservoir Monotube Shocks) with Internal Floating Piston – huge 56mm bore size for maximum dampening control
- Adjustable height front struts to fine tune lift height and leveling if needed
- 50mm hi-flow CNC 6061 Billet alloy piston
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Note: Not all coil options are black. Some may be supplied in teal
- To check if your WK2 has Nivomat rear shocks measure the original shock diameter.
Standard – 51mm
Nivomat – 63mm - Vehicles with Nivomat rear shocks are not compatible with our rear shocks (IMS29-50733), In order to achieve proper fitment, these OE Jeep part numbers below are required that you will have to buy from Jeep
- Shock mount plate P/# 5181844AA
- Shock mount P/# 68029590AE
- Bumper jounce P/# 68029591AC
(8 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesRusty’s Adjustable Front Upper Control Arms w/Forged Flex Ends – High Clearance | JL Wrangler Gladiator JT
- Suits Jeep JL Wrangler 2018+ 2 door and 4door models and Jeep Gladiator JT 2020+
- Comes with high flex joints on the frame end
- Massive 2 inch DOM Tubing
- Greasable flex joints on the frame end
- Forged Ends are tested to over 100,000 psi
- Adjustable to fine-tune caster, pinion angle, and wheelbase
- Black powder coated
- Sold as a pair, left and right
- Made in the USA
(13 reviews) -
Steering UpgradesFREE SHIPPING
within 48 US StatesRusty’s Front Track Bar Mount Brace | JL Wrangler + JT Gladiator
- Fits: 2018-Current Jeep JL Wrangler and 2020-Current Jeep JT Gladiator Models
- This is a brace that supports the mount between the steering box and the track bar bracket
- Constructed of 1/4-inch thick laser-cut steel
- CNC formed for an exact fit
- E-coated in black for durability and looks
- Includes Grade 8 hardware
- INSTALLATION INSTRUCTIONS
- Built in Rainbow City, Alabama, USA
(7 reviews) -
Steering UpgradesFREE SHIPPING
within 48 US StatesRusty’s HD Steering System | JK Wrangler
- Fits: 2007 to 2018 Jeep Wrangler JK Models
- Over 45 Years of Building Steering and Suspension Components
- Massive 1.75″ x 0.250-wall DOM Tubing Drag Link and Tie Rod
- Large 1.25″ threads on the U.S.A. tie rod ends, most brands are imports
- Machined hexed ends for easy adjustment
- Zinc plated tie rod ends for protection and long life
- Serrated Lock Washers
- The strongest JK steering assembly you can buy
- Steering stabilizer tie rod clamp bracket included
- INSTALLATION INSTRUCTIONS
- Built in Rainbow City, Alabama, USA
- Also made in a Aluminum version
(4 reviews) -
YJ Wrangler (1987-1995)FREE SHIPPING
within 48 US StatesKing 4WD Premium YJ Wrangler Soft Top w/ Tinted Windows, w/ Upper Doors
- Suits 1987-1995 Jeep Wrangler YJ 2-door soft top convertibles – full roof with half door windows
- Does not include any framework
- Black Diamond Fabric with 31% smoke colored window tint
- Black Diamond Fabric
- Specification: Two Layer 24oz Marine Grade – Waterproof
- Testing: CFFA, FMVSS & SAE Requirements
- Specification: UV Approved
- Testing: Accelerated Light Aging Test – 1000 Hours
- Window Glass
- Specification: 96g DOT Approved Pressed flexible vinyl, undistorted, won’t shrink or yellow
- Testing: CFFA, FMVSS & SAE Requirements
- Zippers
- Specification: Reinforced nylon self-correcting zippers
- Testing: 50,000 Cycle Test – No bind or drag
- Velcro
- Specification: Industrial Grade Fiber
- Testing: 150 kg (330 lbs.) per square inch
- Seams
- Specification: 135-gauge thread with heat sealed seams, 4-piece thread per inch
- Testing: CFFA, FMVSS & SAE Requirements
- Belt Rails
- Specification: Polyethylene and Anti Cracking
- Testing: CFFA, FMVSS & SAE Requirements
(7 reviews) -
All Pro OffroadFREE SHIPPING
within 48 US StatesJeep Gladiator Overland Tailgate Table | 2019+
- The stock tailgate panel is a wasted opportunity that you can easily correct with the All-Pro Off-Road Overland Tailgate Table.
- The All-Pro Off-Road Overland Tailgate Table turns your opened tailgate into a multi-functional platform for all of your overlanding, camping, fishing, and hunting needs.
- The durable food-grade polyethylene cover can be used as a cutting board while supporting your favorite camp stove.
- A slot on the left side and cup-holders on the right side prevent items from rolling away.
- Requiring only basic hand tools, reusing original hardware, and 3-minutes of time, this is one of the easiest modifications you will ever make on your truck and one every Gladiator owner should do.
- Made in 4 different colors and 2 different styles, choose from the divided cutting board configuration, or the smooth configuration with only round cutouts on the end.
- Thickness is right at 1/2″
- Scroll down on the page to see a full product video!!
- Made in the USA, in sunny California!!
(6 reviews) -
Sale!Gladiator JT (2020-2024+)On Sale All November!!
Dobinsons C29-243V Rear 2.0″ Lift Coils for Jeep Gladiator (440-660LB Load) – Pair
- Suits 2020+ Jeep Gladiator JT Pickup Truck.
- Lifts 2.0″ with 440-660LBS of constant weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Black
- Sold in Pairs
(9 reviews) -
Sale!Gladiator JT (2020-2024+)On Sale All November!!
Dobinsons C29-247VB Rear 3.0″ Lift Coils for Jeep Gladiator – Extra Heavy Load – Pair
- Suits 2020+ Jeep Gladiator JT Pickup Truck
- Lifts 3.0″ with 440-660LBS rear end constant weight (bumper, camper, etc)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – Black
- Sold as a Pair
(8 reviews) -
Sale!DobinsonsOn Sale All November!!
Dobinsons Pair Front Poly Coil Seat Insulator For Jeep Gladiator & JL Wrangler
- Recommended to prevent bowing of coils when lifted (keeps the coils straight)
- Suits 2018+ Jeep Wrangler JL and 2020+ Jeep Gladiator JT
- High Quality Polyurethane , maintains height over time
- Perfect fit replacement OE isolator
- Sold as a pair
- Picture is for reference actual product may vary
(8 reviews) -
Sale!SuspensionFREE SHIPPING
within 48 US StatesOn Sale All November!!Dobinsons 3-Way Adjustable MRA Front Shocks Pair | Wrangler JL + Gladiator JT (2-4″ lift)
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Sold in Pairs
- 677mm extended, 425mm compressed
(15 reviews) -
Sale!SuspensionFREE SHIPPING
within 48 US StatesOn Sale All November!!Dobinsons 3-Way Adjustable MRA Rear Shocks Pair | Jeep Wrangler JL (2-4″ lift)
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Sold in Pairs
- 732mm extended, 460mm compressed
(17 reviews)
