Your cart is currently empty!
Frontier D41 (2022-2025+)
Showing 31–39 of 39 resultsSorted by popularity
-
BrakesFREE SHIPPING
within 48 US StatesPrice Increase Coming May 12thPowerbrake X-Line Stage 2 Front Nissan Big Brake Kit | Frontier Pathfinder Xterra
Suits the following vehicle models:
- 2005-2021 Nissan Frontier D40 4.0L V6 4×4 6-Lug
- 2022-2025+ Nissan Frontier D22 3.8L V6 4×4 6-Lug
- 2005-2012 Nissan Pathfinder R51 4.0L V6 4×4 6-Lug (won’t suit V8)
- 2005-2015 Nissan Xterra N50 4.0L V6 4×4 6-Lug
Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 2-Piece 13.7″ (350mm) rotors with 72-vane discs
- Semi-float disc drive system allows for radial disc expansion and contraction
- Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- Replacement brake pads are stocked here in the USA – Here
- 17″ Wheel Size is required to run these brakes
- This kit is available by SPECIAL ORDER ONLY, allow 8-12 weeks for us to bring it from South Africa. Special orders are not cancellable or refundable!!
(0 reviews) -
Rear DrawersFREE SHIPPING
within 48 US StatesOVS Slide Out Bed Extension for 5.0FT Short Bed Trucks
- Suits 5.0FT Short Bed Mid-Size Trucks
- Mid Size Short Bed 5.0′: 57.08″ long x 42.12″ wide x 7.28″ tall
- Potential Vehicle Fitments (Measure your truck bed first!!): Tacoma, Frontier, Gladiator, Ranger, Hilux, Colorado
- These are made in 3 different sizes. Mid-Size Truck 5.0Ft Long, Full Size Truck 5.5FT Long and Full Size Truck 6.5FT Long
- 75% Extension Bed Cargo Slide
- 1250 LBS. Max Load Capacity
- Steel Frame Construction
- 304 Stainless Steel Hardware
- Single Pull Latch for Easy Operation
- Multiple Anchor Points for Cargo Security
- Great for camping, easily slide out all your gear
- Excellent for work use, keep your tools and heavy objects organized, then slide them out easily to reach them
- Perfect for people with truck caps or canopies, easier to reach the parts out of the truck
- Some photos show the different sized models
(0 reviews) -
Upper Control ArmsSPC 35101 Replacement Ball Joint Set for 25470 25540 25560 25660
- Replaces Ball Joint on SPC Arms – 25470, 25540, 25560, 25660
- Will not work on OEM or any other brand aftermarket upper control arms (UCA’s)
- Suits Toyota Tacoma 2005-2023 4×4 and Prerunner
- Suits Nissan Frontier 2005-2021, Nissan Frontier 2022+, Nissan Navara 2005-2020. Nissan NP300 2016+, Nissan Xterra (2005-2015), Nissan Pathfinder R51 2005 to 2012
- Nissan Titan and Armada
- Ford Ranger T6
- Sold in Pairs
- Fully seated boot to keep grease in and contaminants out for a maintenance-free joint
- High strength steel forging with offsets provides camber & caster adjustability
- One piece polymer race tests like OE and provides low & smooth turning torque
- Oversized ball generates 80˚ of articulation with a 25% increase in neck cross section vs. OE for added strength
- Modern grease formula ensures quiet and smooth operation with reduced wear for extended life
- Extended threads on ball stud will work with most popular spindle gusset kits
- These ball joints are reverse compatible and a direct replacement for the SPC upper control arm sets
- Installation Instructions
(10 reviews) -
Overland Vehicle Systems (OVS)FREE SHIPPING
within 48 US StatesLD TACT Truck Bed Tent – Mid-Size Truck 5.0FT Bed
- For Mid-Size Truck Beds measuring 5.0-5.2 FT in length
- For Vehicles such as Chevy Colorado, Ford Ranger, GMC Canyon, Nissan Frontier, Toyota Tacoma
- 2-3 Person Design with Spacious Interior and Headroom
- Perimeter Skirt and Reinforced Floor Keeps Truck Bed Dry
- Color Coated Poles for Quick Deployment
- Large Windows with Mesh Allows for Ventilation
- Premium 420D Material with Removable Rainfly
- Padded Elastic Anchor Points for Easy Scratch-Free Fit
- Compact Carrying Bag is Included
- Internal Storage Options
- Setup Instructions
- This truck bed tent style is made in 3 sizes, 5FT, 5.5FT and 6.0FT Truck Beds
(3 reviews) -
Sale!Roof Racks
RCI Low-Pro Truck Bed Bars
- Super low profile (low pro) bed rack set to mount all sort of gear or a Roof Top Tent
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier, Ford Ranger, Chevy Colorado, GMC Canyon, Ford F150, Toyota Tundra, etc
- Utilizing 2 crossmembers spanning the truck bed, these bed bars have a high weight capacity and provide even weight distribution on the trucks bed side rails
- Bolts to inside of bed rails or can alternatively be mounted with optional “drill-free” clamps to mount like a truck topper (Not applicable when bolting to accessory rail systems)
- Bars are 3.5″ tall from bed rail to top of bars
- Adjustable width adapts to any truck bed from 54″- 69″ width between the bed rails
- Can be positioned up to 58″ apart (front to back)
- Using these bars will minimize the aerodynamic drag normally associated with roof top tents by keeping it below the roof-line
- Slotted mounting points on top of rack accept nearly any roof top tent making mounting a breeze
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer. This extra step is expensive and time consuming but ensures our paint job will outlast anything else in the industry!
- Easy bolt together assembly, takes about 15 minutes to install with only a few basic hand tools
- All hardware for installation is included
- INSTALL GUIDE
- Made in Loveland, Colorado USA
(5 reviews) -
Bump Stops + SpacersFREE SHIPPING
within 48 US StatesDobinsons 2.2″ Hydraulic Bump Stop IFS Weld on Mount Kit
- Kit includes front Weld on Mounts (Pair) and Dobinsons HBS56-009 Pair of Hydro Bump Stops
- Made for IFS (independent front suspension) vehicles to replace the OEM rubber bump stop
- HBS56-009 – 56mm (2.2″) body | 46mm (1.8″) stroke | 188mm (7.4″) extended | 142mm (5.6″) compressed | 105mm (4.0″) thread length
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 150 PSI
- Extra Short Dead Lengths For Compact Fitment
- Universal design threaded weld on bump stop can to hold the 2.2″ body bump stop
- Cans have 3mm walls for increased strength
- Kit is ideal for those who bottom out often in their offroad driving or go really hard at high speeds
- Could suit a wide range of vehicles as listed below, but remember they are universal and will require adaptation to your vehicle and welding
- Custom fitting and welding is required
- Photo attached shows these bump stops installed with the weld-on mounts on a 3rd Gen Tacoma
(0 reviews) -
Bump Stops + SpacersFREE SHIPPING
within 48 US StatesDobinsons 2.2″ Hydraulic Bump Stop IFS Weld on Mounts
- Universal design threaded weld on bump stop can to hold a 2.2″ body bump stop
- Intended to be used with the Dobinsons HBS59-009 Hydro bumps
- 3mm walls for increased strength
- Sold as a pair
- Ideal for those who bottom out often in their offroad driving or go really hard at high speeds
- Could suit a wide range of vehicles as listed below, but remember they are universal and will require adaptation to your vehicle and welding
- Custom fitting and welding is required
(6 reviews) -
Sale!Roof Racks
RCI 18″ HD Truck Bed Rack
- For Short Bed Trucks from 46-58″ in Bed Length
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier, Ford Ranger, Chevy Colorado, GMC Canyon, Ford F150, Toyota Tundra, etc
- Mount anything from lights, Hi-lift, CO2 tank, fire extinguisher, quick-fist, roto-pax, spare tire, roof top tent, bike mounts, roof baskets, etc
- This is our HD model, utilizing three cross-members spanning the truck bed, this rack is has the highest weight capacity and provides even weight distribution on the trucks bed side rails
- Built in mounting points allow unlimited options for adding accessories
- Bolts to inside of bed rails or can alternatively be mounted with optional “drill-free” clamps *Many Toyota and Jeep models can be bolted directly to accessory bed rails
- Rack is 18″ tall from bed rail to top of rack
- Maintains complete visibility through the back window of most trucks due to its added height
- Slotted mounting points on top of rack accept nearly any roof top tent, allowing tent to be bolted on in a matter of minutes
- Adjustable width adapts to any truck bed from 56.5″ – 64″ width between the bed rails
- Tall enough to fit up to a 35″ spare tire in the bed of a Tacoma, with even more room on full size pickups
- Includes TWO top braces for unlimited accessory and tent mounting options
- Heavy duty black textured powdercoat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer for an exponentially more durable finish
- Easy bolt together assembly, takes about 45 minutes to install
- All hardware and installation instructions provided
- Adjustable Bedrack Install Guide
- Made in Loveland, Colorado USA
(4 reviews) -
Sale!Roof Racks
RCI 12″ High HD Aluminum Truck Bed Rack
- For Short Bed Trucks from 46-58″ in Bed Length
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier, Ford Ranger, Chevy Colorado, GMC Canyon, Ford F150, Toyota Tundra, etc
- Rack is 12″ tall from bed rail to top of rack
- Low Profile design keeps a roof top tent lower than the roof line for better aerodynamics
- Weighs only 68 lbs compared to the steel version at 95lbs
- Built with .190″ heavy duty aluminum and 14ga steel telescoping top braces
- Mount anything from lights, Hi-lift, CO2 tank, fire extinguisher, quick-fist, roto-pax, spare tire, roof top tent, etc
- This is our HD model, utilizing three cross-members spanning the truck bed, this rack is has the highest weight capacity and provides even weight distribution on the trucks bed side rails
- Built in mounting points allow unlimited options for adding accessories
- Bolts to inside of bed rails or can alternatively be mounted with optional “drill-free” clamps
- Adjustable width adapts to any truck bed from 54″ – 64″ width between the bed rails
- Maintains very good visibility through the back window despite the low overall rack height
- Using this rack will minimize the aerodynamic drag normally associated with roof top tents by keeping it largely below the roof-line
- Slotted mounting points on top of rack accept nearly any roof top tent making mounting a breeze
- Includes TWO top braces for unlimited accessory and tent mounting options
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer for an exponentially more durable finish
- Easy bolt together assembly, takes about 45 minutes to install
- All hardware for installation is included
- Adjustable Bedrack Install Guide
- Made in Loveland, Colorado USA
(6 reviews)
