Shocks + Struts - Frontier D41
Showing all 9 resultsSorted by popularity
-
DobinsonsDobinsons SC45-004 Pair of Strut Top Plates for Nissan Frontier Pathfinder Xterra
- Suits Nissan Frontier D40 and D41 2005-2026+ and Navara D40, Nissan Xterra (2005-2015), Nissan Pathfinder R51 (2005-2012)
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- 2 Required per vehicle, sold as pairs
- Photo is for illustration purposes only
- Assembly instructions
(0 reviews) -
DobinsonsTHIS SHIPS FREE
within 48 US StatesDobinsons IMS45-50648 Extended Travel IMS Struts Pair | Nissan Frontier Xterra R51 Pathfinder (2-3″)
- IMS front struts for 2-3″ of lift on Nissan Frontier D40 and D41, Nissan Navara D40 and D23, Nissan Xterra (2005-2015), Nissan Pathfinder R51
- These extended travel struts REQUIRE aftermarket UCA’s for full travel
- SOLD IN PAIRS
- Adjustable height front struts (requires coil to be compressed above the coil seat to adjust height)
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Length specs – 278mm compressed and 410mm extended
- Standard coil seat height setting is 106mm, or set to 119mm for an extra 1″ of lift
- Full 2 year limited warranty, no set rebuild time period
(16 reviews) -
Frontier D41 (2022-2026)THIS SHIPS FREE
within 48 US StatesDobinsons IMS45-50653 2.2″ IFP Rear Shocks Pair | Nissan Frontier D41 2022+
- Suits Nissan Frontier D41 2022+ models – for 0-3″ of lift
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
(18 reviews) -
DobinsonsTHIS SHIPS FREE
within 48 US StatesDobinsons 3-Way Adjustable Extended Travel MRR Struts Pair | Nissan Xterra Frontier Pathfinder R51
- MRA Extended Travel front struts for 2-3″ of lift on Nissan Frontier D40 and D41, Nissan Navara D40 and D23, Nissan Xterra 05-15, Nissan Pathfinder R51
- These extended travel struts REQUIRE aftermarket UCA’s for full travel
- 3-way adjustable valving – adjust high and low speed compression and rebound
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- External Remote Oil Reservoir with dual speed compression adjustment
- Single Piece Lower Leg, Natural Rubber Bushings Top and Bottom
- Triple Lip Oil Seal for Superior Lifespan
- Direct Bolt-on, Fully Rebuildable Design
- Pre-Charged with Nitrogen, Ready to be Assembled and Installed
- EDP Surface Protection, 3mm Heavy Duty Wall Thickness
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Standard coil seat height should be set to 106mm from the center of the lower bushing eye to the bottom of the coil seat
- Length specs – 278mm compressed and 410mm extended
- FITTING INSTRUCTIONS
- Instructions on setting coil seat height
(12 reviews) -
DobinsonsTHIS SHIPS FREE
within 48 US StatesDobinsons IMS45-50642 Front 2.2″ IFP Struts Pair | Frontier Xterra R51 Pathfinder (0-2.5″)
- IMS front struts for 0-2.5″ of lift on Nissan Frontier D40 and D41, Nissan Navara D40 and D23, Nissan Xterra (2005-2015), Nissan Pathfinder R51
- SOLD IN PAIRS
- Adjustable height front struts (requires coil to be compressed above the coil seat to adjust height)
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Specs: 385mm extended, 266mm compressed
- Full 2 year limited warranty, no set rebuild time period
(16 reviews) -
Frontier D41 (2022-2026)THIS SHIPS FREE
within 48 US StatesDobinsons MRA45-A653 3-Way Adjustable Rear Shocks Pair | 2022+ Nissan Frontier
- Suits 2022-2026+ Nissan D41 Frontier
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI CNC machined components for precise tolerances
- Parker Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile
- strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Sold in Pairs
(13 reviews) -
Full Suspension Kits - Frontier D41THIS SHIPS FREE
within 48 US StatesDobinsons 2-3″ Lift IMS Extended Travel Coilovers | Nissan Frontier D41 2022-2026+
- Extended Travel Coilovers Suit Nissan Frontier D41 4×4 Models 2022-2026+ – lifts 2-3″ depending on selections made below
- These extended travel struts REQUIRE aftermarket UCA’s for full travel, like Dobinsons
- Looking for a quick and easy way to lift your Frontier? This is your answer
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Length specs – 278mm compressed and 410mm extended
- Photos for illustration purposes
- Instructions for setting coil seat height
- Link to the matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(3 reviews) -
ExceptionsTHIS SHIPS FREE
within 48 US StatesDobinsons 3-Way Adjustable MRR Front Struts Pair | Nissan Titan Swap
- Suits TITAN SWAPPED 2005-2021 Nissan Frontier D40, 2022-Present Nissan Frontier D41, 2005-2015 Nissan Xterra N50
- If you don’t know what a Titan Swap is, then this is not the product for you
- What is a “Titan Swap”?
- When paired with the correct TITAN SWAP components, the MRA45-A530 coilovers are capable of achieving nearly 12 inches of front suspension travel, allowing Frontier and Xterra owners to unlock the full potential of a long-travel front end
- Expect dramatically improved wheel articulation, superior handling at high speeds, and a controlled, compliant ride across rough terrain
- Pair of Struts only, no coils included and not preassembled
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- If you’re looking for an assembled set of coilovers, those are here: Assembled Coilovers for Titan Swaps
- 461mm (18.15″) extended length, 333mm (13.11″) compressed length
- Height adjustable with a fully threaded body from 1.5″ to 3.5″ of lift
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware and Sticker Pack
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs – sold separately
- Link to recommended coils to suit these vehicles
- Link to add assembly labor charge, so that when you buy these struts and the coils, you can have them preassembled before shipping
- These coilovers are designed exclusively for TITAN SWAP conversions on Nissan D40/D41 Frontier and N50 Xterra models
- Proper TITAN control arms, axles, and related components are required for correct installation and performance
- Not compatible with stock-width suspension setups
- Recommended Preload settings:
- 1.5″ lift – 87mm
- 2.0″ lift – 95 mm
- 2.5″ lift – 102 mm
- 3.0″ lift – 110 mm
- 3.5″ lift – 117mm
(0 reviews) -
Full Suspension Kits - Frontier D41THIS SHIPS FREE
within 48 US StatesDobinsons 2-3″ MRR Extended Travel Coilovers 3-Way Adjustable | Nissan Frontier D41 2022-2026+
- Extended Travel Coilovers Suit Nissan Frontier D41 4×4 Models 2022-2026+ – lifts 2-3″ depending on selections made below
- These extended travel struts REQUIRE aftermarket UCA’s for full travel, like Dobinsons
- Looking for a quick and easy way to lift your Frontier? This is your answer
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Dobinsons MRR are height adjustable by a fully threaded body
- The Dobinsons MRR Coilovers will come pre-assembled with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Length specs – 278mm compressed and 410mm extended
- Photos for illustration purposes
- FITTING INSTRUCTIONS
- Instructions for setting coil seat height
- Link to the matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
(6 reviews)
