Your cart is currently empty!
Caster and Alignment
Showing 31–51 of 51 resultsSorted by popularity
-
Jimny (2018+)Dobinsons Front Jimny Crossmember Drop Kit | Jimny 2018+
- Suits Suzuki Jimny 1998-2017 and 2018+
- Zinc plated for a long lasting finish
- Solid steel construction, includes all necessary longer bolts for simple installation
- See attached photo to show how it looks when installed
- Dobinsons transmission and transfer case cross member spacer kit
- Designed to correct the angle of the front driveshaft after lifting the vehicle
- Lifting the vehicle can cause driveline vibration issues, so reduce those, this kit is recommended.
(7 reviews) -
Triton L200 2015-2023Dobinsons S43-001 Rear Driveshaft Spacer | Mitsubishi Triton L200 2005-2023
- Suits 2005-2023 Mitsubishi Triton L200
-
ML/MN Tritons with the “easy select” transmission (Identifiable by a two-piece tailshaft) are renowned for developing a drive line vibration on take off.
-
This vibration is caused by a combination of the short tailshaft length and the difference in angles between the universal joints and center bearing.
-
Fitting a 22mm tailshaft spacer on the diff side of the tailshaft reduces the severity of this vibration.
-
It doesn”t always eliminate the vibration completely, but does help reduce it and takes pressure off the centre bearing.
-
Vehicles with the “Super Select Manual” or Automatic transmissions do not suffer from the same vibration. These vehicles have a one piece tailshaft from factory.
(5 reviews) -
Dobinsons
Dobinsons Headlight Sensor Extension | 2016+ Fortuner Hilux
- Suits 2016-2024 Hilux Revo, Fortuner SW4 2016-2024
- Required for models with automatic headlights
- This MUST BE FITTED when lifting these vehicles or the sensor will go crazy
(3 reviews) -
Dobinsons
Dobinsons Toyota Carrier Bearing Spacer Kit WA59-553K
- Suits 2005-2023 Toyota Tacoma, 2005-2015 Hilux Vigo, 2016-2024 Hilux Revo, Fortuner SW4 2005-2024
- Spaces down the carrier bearing on the rear 2-piece driveshaft to reduce driveline vibrations and angles
- Zinc plated steel with all hardware supplied, super heavy duty
- Simple bolt-on design
- Includes 4 x 12mm thick spacers and bolts and washers needed
- Space it down 12mm (1/2″) or 24mm (1.0″), depending how much lift you’ve added
- Includes 2 sets of longer bolts to suit the spacers, as needed
(3 reviews) -
Hilux Vigo (2005-2015)
Dobinsons Rear Brake Adjuster for Toyota Hilux Vigo
- Toyota Hilux Vigo 2005-2015
- Required when using lifted rear leaf springs to set the rear brakes properly
- Adjusts rear load sensor. If you lift the truck without adding this, the rear brakes won’t work properly
- BA59-002 – Instructions
(4 reviews) -
Dobinsons
Dobinsons WA21-584K Rear Brake Line Extension Kit
- Dobinsons WA21-584K Rear Brake Line Extension Kit Suits Isuzu D-Max 2020-2024, and Mazda BT-50 2020-2024+.
- This kit must be run when using Dobinsons rear shocks due to their extended length
- Use with GS43-081B, IMS43-50081B or MRA43-081B shocks on these trucks
(5 reviews) -
Dobinsons
Dobinsons WA21-546K UCA Ball Joint Spacer Kit
- Suits Isuzu D-Max 4×4 2012-2020 models
- Required when lifting more than 2″ and when running extended travel struts
- Lowers front upper ball joint angle to reduce the stress and angle on front UCA’s
- Must Not Be Fitted Without diff drop kit DD21-590K installed
(4 reviews) -
Dobinsons
Dobinsons Single Caster Wedge 60MM Wide – 3 Degrees
- 3 Degree Caster shim can be used to correct front caster / pinion angle or rear pinion angle on a 60mm wide leaf spring
- Sold individually
- Suits the following Dobinsons leaf spring part numbers:
- 106-4+3-R
- 106-5+3-R
- B2600-4X4-R
- DAI-009-F
- DAI-011-R
- DAI-015-R
- DAI-020-F
- DAI-021-R
- F77-5+2-R
- F77-5L-F
- HIL-001-F
- HIL-002-F
- HIL-003-F
- HIL-006-R
- HIL-010-F
- HIL-034-R
- HIL-035-R
- HIL-4+2-R
- HIL-5+2-R
- L19-131-R
- L19-132-R
- L19-133-R
- L21-140-R
- L21-141-R
- L21-142-R
- L39-030-R
- L39-031-R
- L39-032-R
- L45-002-R
- L45-003-R
- L45-004-R
- L45-151-R
- L45-152-R
- L45-153-R
- L45-154-R
- L59-040-R
- L59-041-R
- L59-042-R
- L59-110-R
- L59-111-R
- L59-112-R
- L59-120-R
- MAZ-003-R
- MK-6L-F
- MK-7L-F
- MQ-6L-F
- MQ-7L-F
- MQ-UTE-R
- MQ-WAG-R
- NAV-005-R
- NAV-4WD-R
- NIS-260-F
- RODE-008-R
- RODE-011-R
- RODE-012-R
- RODE-013-R
- TOY-470-R
- UAZ-004-R
- UAZ-006-R
(7 reviews) -
Colorado (USA Model)
Lower Arm Alignment Cams | Colorado + Canyon 2015-2023
- Suits 2015-2023 Chevy Colorado and GMC Canyon
- The Dirt King alignment cams are the strongest of its kind on the market
- Included are eight alignment cams laser cut from 3/16″ thick steel and four 10.9 bolts
- The cams are designed with seven alignment holes to keep the alignment locked in place
- This solves the common issue of knocking your truck out of alignment while off-roading
- Includes
(8) Lower arm alignment cams
(4) 10.9 bolts and hardware - Proudly made in the USA
(0 reviews) -
Suspension
Tundra Spindle Gussets | Toyota Tundra 2007-2021
- Suits 2007-2021 Toyota Tundra
- The factory Toyota spindles commonly bend during extreme off-road use
- Our spindle gussets solve this issue by reinforcing the problematic areas
- The preformed gussets simply weld to the factory forged spindles, dramatically increasing the strength
- This product is designed to allow for maximum wheel backspacing and eliminates the use of the factory sway bar
- Check out this in depth review on the product: [Trail Tacoma]
- Welding Required
- Made in the USA
(0 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesApache Offroad HD Chromoly Adjustable Sway Bar Links | 3rd Gen 4Runner 1996-2002
- Suits 3rd Gen Toyota 4Runner 1996-2002, Prado 90 Series, Front or Rear
-
Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Order 1 for 1 vehicle
- Adjustable (on vehicle) from 165mm – 206mm – Requires at least 1″ of lift if used in the front and 2″ in the rear.
- Custom Forged Oversized (22mm ball) Chromoly Rod End / Joints
- Premium Silicone Dust Boots
- High Carbon Steel Center Link
- Black EDP Coating for corrosion resistance
- High Quality Polyurethane Bushings on frame side
- Serrated Oval / Distorted Thread Locking Nut – The factory sway bar material expands and contracts as you drive, thus causing the nut to come loose and the sway bar link to disconnect. This is not ideal. This style nut, is the best solution we have found to the issue, though we do still recommend the use of thread locker at install.
- Mounting hardware included
- Rod end machined to accept hex key to prevent the rod end from spinning during installation. Other brands come with a nut on the inner side of the shaft, which is harder to use and more likely to cause you to tear the boot upon installation.
- Sold as a pair
- Maintenance Free Design
- 2 year unlimited mile warranty
(10 reviews) -
Rusty's Off RoadFREE SHIPPING
within 48 US StatesRusty’s Forged Adjustable Sway Bar Quick Disconnects | JK Wrangler
- Fits: 2007-2018 JK Wrangler and Unlimited
- Forged ends with Grade 8 and stainless steel hardware
- Adjustable from 2″ to 8.5″ of lift; no removal needed for adjustment
- Provides an easy way to connect / disconnect the front sway bar
- Includes bolt-on frame side retention brackets that allow you to hold the links up when sway bar links are disconnected.
- Hardware is included for all models, upgrade vehicles and never buy another set of disconnects!
- Built in Rainbow City, Alabama, USA
(5 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons WA59-512K 2.5° Front Poly Caster Bushing Kit | Land Cruiser LJ70 LJ73 RJ70 RJ73
-
- For 11/84 to 12/89 Toyota 70 Series Bundera models, LJ70, LJ73, RJ70 and RJ73 with Round Headlights
- For 0″ to 2.5″ of lift, Recommended when replacing 20+ year old suspension parts
- Contains all 4 bushings for the front of the radius arm to axle
- Complete with steel inner sleeve
- This kit is a must for any lifted Landcruiser so that the steering control is correct giving you the best ride quality possible
- Photo for illustration purposes
(9 reviews) -
-
Suspension
Dobinsons Jeep JL JT Front Track Bar Axle Bracket Kit (3–4.5” Lift)
- Suits Jeep Wrangler JL and Gladiator JT with 3.0-4.5″ of Lift
- The Dobinsons Jeep JL/JT Front Track Bar Axle Bracket Kit corrects vehicle roll center
- Corrects steering geometry eliminating bump steer and other front-end issues
- Restores factory handling
- Prevents Coil Bowing
- Reduces body roll on lifted JL Wrangler/Unlimited and Gladiator models
- Bolt-on bracket mounts to the front axle
- Black Powder Coat finish
- Drilling is required
(9 reviews) -
Tacoma 4th Gen (2024-2025+)FREE SHIPPING
within 48 US StatesIcon 2024 Toyota LC250 / Tacoma Diff Drop Kit
- Suits 2024+ Toyota Tacoma and 2024+ Land Cruiser 250
- Drops front differential to provide better maximum operating angle for CV joints
- Maximizes available suspension travel when paired with ICON coilovers
- CNC laser cut, precision brake-formed steel bracketry with durable black powder coat finish
- Polyurethane bushings limit deflection and prevent differential movement under load
- 100% Bolt-on with no cutting or welding necessary for installation
- Required for installation of ICON coilover kits on 4WD 2024 Toyota Tacoma and Land Cruiser 250 models and GX550
- Installation Guide
(0 reviews) -
Rusty's Off RoadFREE SHIPPING
within 48 US StatesRusty’s Forged Adjustable Sway Bar Quick Disconnects | JL Wrangler + JT Gladiator
- Fits: 2018-Current Jeep JL Wrangler and 2020-Current Jeep JT Gladiator Models with 2.0-6.5″ of lift
- Forged ends with Grade 8 and stainless steel hardware
- Adjustable from 2″ to 6.5″ of lift; no removal needed for adjustment
- Provides an easy way to connect / disconnect the front sway bar
- Includes bolt-on frame side retention brackets that allow you to hold the links up when sway bar links are disconnected.
- Hardware is included for all models, upgrade vehicles and never buy another set of disconnects!
- Built in Rainbow City, Alabama, USA
(10 reviews) -
Grand Vitara (2005-2015)
Dobinsons Suzuki Camber Bolt Kit WA57-506K
- Suits Suzuki Grand Vitara 8/2005-2015
- ±1.2° for Lower Control Arm Camber Adjustment
- Essential when lifting Vehicles
- Easy to adjust and set once installed
- Includes Instructions
(8 reviews) -
TeraflexFREE SHIPPING
within 48 US StatesTeraflex JL JT Front Track Bar Axle Bracket Kit (2.5–3.5” Lift)
- Suits Jeep Wrangler JL and Gladiator JT
- The TeraFlex JL/JT: Front Track Bar Axle Bracket Kit corrects vehicle roll center
- Corrects steering geometry eliminating bump steer and other front-end issues
- Restores factory handling
- Reduces body roll on lifted JL Wrangler/Unlimited and Gladiator models
- Bolt-on bracket mounts to the front axle
- Drilling is required
- Installation Instructions
(9 reviews) -
TeraflexFREE SHIPPING
within 48 US StatesTeraflex JL: Rear Track Bar Axle Bracket Kit (2.5–4.5” Lift)
- The TeraFlex JL: Rear Track Bar Axle Bracket Kit corrects vehicle roll center
- Restores factory handling
- Reduces body roll on lifted JL Wrangler/Unlimited models
- Multiple mounting locations allows neutral lateral alignment of the rear axle on JL models with 2.5–4.5” lifts
- Bolt-on bracket mounts to the rear axle
- Drilling is required
- Installation Instructions
(9 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons ±2 ½ – 3° Caster Bushing Kit for Suzuki Jimny
- Suits Suzuki Jimny 1998-2017 and 2018+
- High quality rubber, producing the highest ride quality
- Adjustable during installation to offer ±2 ½ – 3° of caster adjustment
- Replaces OE bushes holding front and radius arms to the axle
- Order 2 for 1 vehicle to change it all
- Raising Vehicle Will Effect Wheel Alignment. It is Recommended that this Castor Adjustment Kit to be Fitted and a Wheel Alignment Carried Out.
- Installation Instructions
(3 reviews) -
Dobinsons
Dobinsons Extended JL Rear Sway Bar Link Kit | Jeep Wrangler JL
- Fits Jeep Gladiator JT 2018+ and Jeep Wrangler JL 2018+ 2-door and 4-door
- Recommended for a Jeep with 2″ of lift
- Required for a Jeep with 3″ of lift
- Heavy Duty design with high quality ball joint ends for long life
- Fits and installs the same as OEM, but with added length so that the stock sway bar still functions normally at a lifted height without reducing wheel travel
- Sold as a pair, enough for 1 vehicle
(5 reviews)
