Your cart is currently empty!
Spacers
Showing all 28 resultsSorted by popularity
-
4Runner 5th Gen (2010-2024)Dobinsons 15mm Rear Spacer | 4Runner FJ Cruiser Lexus GX470 GX460
- Suits various vehicles, as listed below
- High Quality Polyurethane, maintains height over time
- Fits on top of OE isolator, below the frame mount
- Sold as 1 piece
- Lasts longer than rubber
- Easy to add lift height to correct for vehicle lean
- Adds 15mm (0.6″) of lift
(18 reviews) -
4Runner 3rd Gen (1996-2002)Dobinsons PS59-4030 1/2″ Lift Alloy Strut Top Mount Spacer | Tacoma 4Runner FJ Cruiser GX470 GX460
- Suits various vehicles, as listed below
- Dobinsons PS59-4030 1/4″ spacer at the strut equals approximately 1/2″ lift at the wheel
- Designed to exact OE top mount specs
- T-6061 aircraft grade alloy, machined then black anodized for corrosion resistance
- Allows quick method of correcting a vehicle lean without complete strut disassembly
- Sold individually
- Fits between the strut top mount and the chassis of the vehicle
- Note: See 2nd photo to make sure you have enough threads left to install the spacer. This vehicle came with short studs that don’t allow the spacer to be installed without changing out to thicker studs
(12 reviews) -
Suspension
KDSS Spacer Kit – Lexus GX460 5th Gen 4Runner by Treaty Oak Offroad
- Suits 5th Gen Toyota 4Runner with KDSS (2010-2024) and Lexus GX460 (2010-2023)
- Made from 6061 aluminum, Type III hard coat anodized in black, and supplied with new hardware
- May require modification to your factory front skid plates due to additional down travel of the sway bar
- Helps correct incessant lean of a lifted vehicle with KDSS by adding a spacer to the fixed mount up front and to both mounts on the rear
- Bolt on installation – may require trimming of OE skid plate on passenger side to add more clearance
- Mounts between factory points that hold the sway bar in place
- Raised/longer spacers helps correct the lean of a vehicle and also adds additional rear travel in the back to help clear the sway bar link from the panhard rod at full extension
- Includes front and rear mounts (3 in total)
- See instructional video for how these get installed here
- Installation Instructions
(16 reviews) -
200 Series Land Cruiser (2008-2021)
Dobinsons PS59-4032 1/2″ Lift Alloy Strut Spacer | Land Cruiser Tundra Sequoia
- A 1/4″ spacer at the strut equals approximately 1/2″ lift at the wheel
- Designed to exact OE top mount specs
- T-6061 aircraft grade alloy, machined then black anodized for corrosion resistance
- Allows quick method of correcting a vehicle lean without complete strut disassembly
- Sold individually
- Suits the following vehicles:
- Toyota Land Cruiser 200 Series – all years
- Toyota 300 Series Land Cruiser
- Lexus LX570 – all years
- Toyota Tundra – 2007 to 2021
- Toyota Tundra 2022+
- Toyota Sequoia – 2008 to 2022
- Toyota Sequoia 2023+
- Make sure you have enough threads on the studs of your strut mounts to add this 1/4″ thick spacer before ordering. Some top mounts have less thread length than others!!
(19 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons Front 30mm Polyurethane Coil Spacer (Single) Toyota Land Cruiser 80 105
- Suits Land Cruiser 80 Series and Lexus LX450
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold individually, available front and rear for several vehicles
- Lasts longer than rubber
- Easy to add lift height for worn coils
(4 reviews) -
Dobinsons
Dobinsons Rear 30mm Polyurethane Coil Spacer (Single) Toyota Land Cruiser 80 105
- Suits Land Cruiser 80 Series and Lexus LX450, LX470 and 100 Series
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold individually, available front and rear for several vehicles
- Lasts longer than rubber
- Easy to add lift height for worn coils
(2 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons 20mm Coil Spacer (Single) for Front of Toyota Land Cruiser 80 105
- Suits Land Cruiser 80 Series and Lexus LX450
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold individually, available front and rear for several vehicles
- Lasts longer than rubber
- Easy to add lift height for worn coils
(7 reviews) -
100 Series Land Cruiser IFS (1998-2007)
Dobinsons Rear 15mm Polyurethane Coil Spacer (Single) Toyota Land Cruiser 80 100 105
- Suits Land Cruiser 80 Series, 100 Series and Lexus LX450
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold individually, available front and rear for several vehicles
- Lasts longer than rubber
- Easy to add lift height for worn coils
(5 reviews) -
Suspension
Front KDSS Spacer – Lexus GX460 5th Gen 4Runner
- Front single spacer with hardware only
- Suits 5th Gen Toyota 4Runner with KDSS (2010-2024) and Lexus GX460 (2010-2023)
- Made from 6061 aluminum, Type III hard coat anodized in black, and supplied with new hardware
- Helps correct incessant lean of a lifted vehicle with KDSS by adding a front spacer
- Bolt on installation
- May require modification of a factory skid plate to clear the sway bar link at full droop
- Mounts between factory points that hold the sway bar in place
- Raised/longer spacers helps correct the lean of a vehicle and also adds additional rear travel in the back to help clear the sway bar link from the panhard rod at full extension
- Includes 1 x front mount with hardware
- See instructional video for how these get installed here
- Installation Instructions
- A full kit including the single front spacer is also offered HERE
(16 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons 10mm Coil Spacer (Single) for Front of Toyota Land Cruiser 80 105
- Suits Land Cruiser 80 Series and Lexus LX450
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold individually, available front and rear for several vehicles
- Lasts longer than rubber
- Easy to add lift height for worn coils
- Lifts 10mm (0.4″)
(8 reviews) -
Dobinsons
Dobinsons 15mm Rear Spacer | 2022+ Tundra Sequoia LC300 Tacoma
- Suits 2022-2024+ Toyota Tundra, 2023-2024+ Toyota Sequoia, 2022+ Toyota Land Cruiser 300 Series, 2024+ Toyota Tacoma
- High Quality Polyurethane, maintains height over time
- Fits on top of coil spring, below the OE isolator
- Sold as 1 piece
- Lasts longer than rubber
- Easy to add lift height to correct for vehicle lean
- Adds 15mm (0.6″) of rear lift
- Photo for illustration purposes
- There’s also a front spacer option
(6 reviews) -
100 Series Land Cruiser IFS (1998-2007)
Dobinsons Rear 10mm Poly Coil Spacer (Single) Toyota Land Cruiser 80 100 105
- Suits Toyota Land Cruiser 80 series and Lexus LX450 from 1990-97, and 100 series from 1998 to 2007
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold individually, available front and rear for several vehicles
- Lasts longer than rubber
- Easy to add lift height for worn coils
- Lifts 10mm (0.4″)
(8 reviews) -
4Runner 5th Gen (2010-2024)
1.0″ Rear Coil Spacer Single | 4Runner FJ Cruiser Lexus GX470 GX460
- Suits Toyota 4th Gen 4Runner – 2003 to 2009, Toyota 5th Gen 4Runner – 2010 to 2024, Toyota FJ Cruiser – all years, Lexus GX470 – all years, Lexus GX460 – all years, Toyota Prado 120 – all years, Toyota Prado 150 – all years
- Sold Individually
- Long lasting – hard durometer polyurethane
- Easily add rear lift or fix leaning issues
- Optional- bolt to the coil bucket for easy installation. We have noticed that it can be difficult for customers to install other brands, as they tend to slide around while you are trying to reinstall the spring. Bolting it to the coil bucket eliminates that issue.
- Do not stack
- Fits any OE style spring – Top Cone isolator- Apache, Dobinsons, Ironman, OEM, Old Man Emu, Alldogs Offroad, etc.
- NOT compatible with Eibach rear lift springs used in their air to coil conversions – GX470/460 etc.
- Cone Isolator shown in picture not included
- Airbag Models will need to convert for coil springs for these to work
(10 reviews) -
4Runner 5th Gen (2010-2024)
1/2″ Rear Coil Spacer Single | 4Runner FJ Cruiser Lexus GX470 GX460
- Suits Toyota 4th Gen 4Runner – 2003 to 2009, Toyota 5th Gen 4Runner – 2010 to 2024, Toyota FJ Cruiser – all years, Lexus GX470 – all years, Lexus GX460 – all years, Toyota Prado 120 – all years, Toyota Prado 150 – all years
- Sold Individually
- Long lasting – hard durometer polyurethane
- Easily add rear lift or fix leaning issues
- Optional- bolt to the coil bucket for easy installation. We have noticed that it can be difficult for customers to install other brands, as they tend to slide around while you are trying to reinstall the spring. Bolting it to the coil bucket eliminates that issue.
- Do not stack
- Fits any OE style spring – Top Cone isolator- Apache, Dobinsons, Ironman, OEM, Old Man Emu, Alldogs Offroad, etc.
- NOT compatible with Eibach rear lift springs used in their air to coil conversions – GX470/460 etc.
- Cone Isolator shown in picture not included
- Airbag Models will need to convert for coil springs for these to work
(10 reviews) -
Dobinsons
Dobinsons 15mm Polyurethane Coil Spacer (Single) PS29-4014
- Specifically suited to the Front and Rear of a Suzuki Sidekick, Geo Tracker or the front of a Jeep Cherokee XJ and Jeep TJ or LJ
- 15mm (0.6″) thick
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold individually, available front and rear for several vehicles
- Lasts longer than rubber
- Easy to add lift height for worn coils
- Photo for illustration purposes
(8 reviews) -
Suspension
KDSS Spacer Kit – Lexus GX460 5th Gen 4Runner – Rears Only
- Rear spacers only (2 rear spacers included with hardware)
- Suits 5th Gen Toyota 4Runner with KDSS (2010-2024) and Lexus GX460 (2010-2023)
- Made from 6061 aluminum, Type III hard coat anodized in black, and supplied with new hardware
- Helps correct incessant lean of a lifted vehicle with KDSS by adding a spacers to both mounts on the rear
- Bolt on installation
- Mounts between factory points that hold the sway bar in place
- Raised/longer spacers helps correct the lean of a vehicle and also adds additional rear travel in the back to help clear the sway bar link from the panhard rod at full extension
- Includes rear mounts (2 in total)
- See instructional video for how these get installed here
- Installation Instructions
- A full kit including the single front spacer is also offered HERE
(16 reviews) -
Dobinsons
Dobinsons Rear 1/2″ Coil Spacers (Pair) Jeep Wrangler JL and Gladiator
- Suits 2018+ Jeep Wrangler JL 2-door and 4-door and 2020+ Jeep Gladiator JT
- Adds 1/2″ of lift height
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold in Pairs
- Lasts longer than rubber
- Easy to add lift height for worn coils or when added weight has squatted down the rear
(2 reviews) -
4Runner 5th Gen (2010-2024)
3/4″ Rear Coil Spacer Single | 4Runner FJ Cruiser Lexus GX470 GX460
- Suits Toyota 4th Gen 4Runner – 2003 to 2009, Toyota 5th Gen 4Runner – 2010 to 2024, Toyota FJ Cruiser – all years, Lexus GX470 – all years, Lexus GX460 – all years, Toyota Prado 120 – all years, Toyota Prado 150 – all years
- Sold Individually
- Long lasting – hard durometer polyurethane
- Easily add rear lift or fix leaning issues
- Optional- bolt to the coil bucket for easy installation. We have noticed that it can be difficult for customers to install other brands, as they tend to slide around while you are trying to reinstall the spring. Bolting it to the coil bucket eliminates that issue.
- Do not stack
- Fits any OE style spring – Top Cone isolator- Apache, Dobinsons, Ironman, OEM, Old Man Emu, Alldogs Offroad, etc.
- NOT compatible with Eibach rear lift springs used in their air to coil conversions – GX470/460 etc.
- Cone Isolator shown in picture not included
- Airbag Models will need to convert for coil springs for these to work
(10 reviews) -
Dobinsons
Dobinsons Pair Front Poly Coil Seat Insulator For Jeep Gladiator & JL Wrangler
- Recommended to prevent bowing of coils when lifted (keeps the coils straight)
- Suits 2018+ Jeep Wrangler JL and 2020+ Jeep Gladiator JT
- High Quality Polyurethane , maintains height over time
- Perfect fit replacement OE isolator
- Sold as a pair
- Picture is for reference actual product may vary
(8 reviews) -
Sale!Pro Comp
Pro Comp 65175 2.5″ Leveling Kit – Sequoia 01-07 & Tundra 00-06
- Fits 2000 to 2006 Toyota Tundra
- Fits 2001 to 2007 Toyota Sequoia
- Level Lift Front Strut Spacers
- Includes Diff Drop Kit
- Lift Height: 2.5 Inch
- Max Tire Size: 32 Inch
- Easy to return to stock height
- View/Download Installation Instructions
- This item is on clearance and is not returnable
(9 reviews) -
Dobinsons
Dobinsons 80 Series Coil Spacers Front or Rear
- Suits 1990-1997 Toyota Land Cruiser 80 Series and Lexus LX450
- All coil spring spacers are sold individually
- Order 2 spacers to lift the left and right side the same amount
- Made of long lasting high quality polyurethane
- The lift height is exactly the amount you will lift from the height you have now
- Perfect fit between OE isolator and coil seat
- Coil spacers cannot be stacked – use only one spacer per coil
(9 reviews) -
TJ Wrangler (1996-2006)FREE SHIPPING
within 48 US StatesRusty’s Jeep TJ / LJ Wrangler 1.75″ Budget Boost Kit with Shocks
- Suits Jeep TJ and LJ Wrangler 1997-2006
- This kit raises the stance of the vehicle exactly 1.75″ front and rear
- Super easy to install without any other parts required
- Great for an entry level lift without spending much money
- Durable polyurethane material is impervious to vehicle fluids and road grime
- Maintains factory ride quality and handling characteristics
- Simple bolt-on installation with no modifications to the vehicle required
- Easily return the vehicle to stock if desired
- KIT INCLUDES:
- 2 x Front 1.75″ Coil Spacers
- 2 x Rear 1.75″ Coil Spacers
- 4 x Shocks – your choice of shock type, Twin Tube or Monotube
- Proudly Made in the USA
- Installation Instructions
(4 reviews) -
JK Wrangler (2007-2018)FREE SHIPPING
within 48 US StatesRusty’s Jeep JK Wrangler 2″ Budget Boost Kit with Shocks
- Suits Jeep JK Wrangler 2007-2018
- This kit raises the stance of the vehicle exactly 2″ front and rear
- Super easy to install without any other parts required
- Great for an entry level lift without spending much money
- Durable polyurethane material is impervious to vehicle fluids and road grime
- Maintains factory ride quality and handling characteristics
- Simple bolt-on installation with no modifications to the vehicle required
- Easily return the vehicle to stock if desired
- KIT INCLUDES:
- 2 x Front 2″ JK Coil Spacers
- 2 x Rear 2″ JK Coil Spacers
- 4 x Shocks – your choice of shock type, Twin Tube or Monotube
- Proudly Made in the USA
- Installation Instructions
(9 reviews) -
Full Suspension Kits - JL WranglerFREE SHIPPING
within 48 US StatesRusty’s Jeep JL Wrangler 2″ Budget Boost Kit
- Suits Jeep JL Wrangler 2018-2024+
- This kit raises the stance of the vehicle exactly 2″ front and rear
- Super easy to install without any other parts required
- Great for an entry level lift without spending much money
- Consider upgrading shocks as well for better ride quality than stock
- KIT INCLUDES:
- 2 x Front 2″ JL Coil Spacers
- 2 x Rear 2″ JL Coil Spacers
- Proudly Made in the USA
(6 reviews) -
Full Suspension Kits - GladiatorFREE SHIPPING
within 48 US StatesRusty’s Jeep JT Gladiator Leveling Kit
- Suits Jeep JT Gladiator 2020-2024+
- Level out your Jeep Gladiator by adding 2″ to the front and 3/4″ to the rear, removing pretty much all of the factory rake
- This makes the stance of the vehicle sit exactly where it should have from the factory
- Super easy to install without any other parts required
- Great for an entry level lift without spending much money
- Consider upgrading shocks as well for better ride quality than stock
- KIT INCLUDES:
- 2 x Front 2″ JT Coil Spacers
- 2 x Rear 3/4″ JT Coil Spacers
- Proudly Made in the USA
(5 reviews) -
Dobinsons
Dobinsons 30mm Polyurethane Coil Spacer (Single) PS29-4015
- Specifically suited to the Front and Rear of a Suzuki Sidekick, Geo Tracker or the front of a Jeep Cherokee XJ and Jeep TJ or LJ
- 30mm (1.2″) thick
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold individually, available front and rear for several vehicles
- Lasts longer than rubber
- Easy to add lift height for worn coils
- Photo for illustration purposes
(2 reviews) -
Tundra 3rd Gen (2022-2024)
2″ Front Strut Spacer Kit for Tundra 2022+ & Sequoia 2023+
- Suits 2022+ Toyota Tundra and 2023+ Toyota Sequoia
- Note: Not for use on Tundra or Sequoia equipped factory rear air, TRD PRO, or TRD Off-Road.
- ReadyLIFT leveling kits are the fastest, safest, most cost-effective way to bring the front of your vehicle level with the rear for that ideal lifted neutral stance.
- Our front strut assembly eliminates the hassle, time, and concern of compressing springs.
- A ReadyLIFT leveling kit will maintain a smooth OEM ride without adding stress to stock suspension components!
- The all-new part number 66-52200 2022-UP Toyota Tundra Leveling Kit is an excellent choice for those who want a level stance while running larger tires up to 34 inches.
- The no-trim maximum tire size for this kit is a 295-60R20 with a 20” X 9” wheel and +18 offset.
- Fabricated Steel Front Strut Spacers With Durable Black Powder Coat Finish
- Product Will Retain Ride Or Handling Quality
- Engineered And Built To Provide Years Of Trouble Free Service
- Made In USA
- Limited 1 Year Warranty
- Download Pdf Instructions
(9 reviews) -
Dobinsons
Dobinsons Front 1/2″ Coil Spacers (Pair) Jeep Wrangler JL and Gladiator
- Suits 2018+ Jeep Wrangler JL 2-door and 4-door and 2020+ Jeep Gladiator JT
- Adds 1/2″ of lift height
- High Quality Polyurethane, maintains height over time
- Perfect fit between OE isolator and coil seat
- Sold in Pairs
- Lasts longer than rubber
- Easy to add lift height for worn coils or when added weight has squatted down the front
(8 reviews)
