Your cart is currently empty!
Torsion Bars
Showing all 11 resultsSorted by popularity
-
100 Series Land Cruiser IFS (1998-2007)
Dobinsons 100 Series Torsion Bar Pair for V8 Gas 1998-2007
- For V8 Gasoline/Petrol powered Land Cruisers from 1998 to 2007 and Lexus LX470
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- These are 1160mm in total length, 32mm bar thickness
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
- Comes as a set, 1 per vehicle
Rated 5.00 out of 5(5 reviews) -
Suspension
Dobinsons TB59-1646 Torsion Bar Pair for Toyota IFS 1985-1995
- For 4×4 1st and 2nd Gen 4Runners and Pickups, 1985 to 1995 with IFS suspension
- Also suits Hilux LN107 LN108 RN106 1991-2005
- TB59-1646 measure 1064mm in total length – check before ordering if you aren’t sure
- 26mm bar thickness
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
Rated 5.00 out of 5(5 reviews) -
100 Series Land Cruiser IFS (1998-2007)
OME Heavy Duty Torsion Bar Pair for Land Cruiser 100 Series V8
- For V8 Gasoline/Petrol powered Land Cruisers from 1998 to 2007
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
Rated 5.00 out of 5(7 reviews) -
Trooper
Dobinsons Heavy Duty Torsion Bar Pair for Isuzu Trooper (Acura SLX) 1992 to 2002
- For all Isuzu Trooper and Acura SLX models from 1992 to 2002
- 1220 mm total length, 30mm bar thickness
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
Rated 5.00 out of 5(5 reviews) -
100 Series Land Cruiser IFS (1998-2007)
Dobinsons 100 Series Torsion Bars Pair for DIESEL ONLY
- For DIESEL powered Land Cruisers from 1998 to 2007
- Total length is 1210mm, 34mm bar thickness
- These WILL NOT fit a V8 gas model Land Cruiser, they’re too long
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
- Comes as a set, 1 per vehicle
Rated 5.00 out of 5(2 reviews) -
ARB
OME 303003 Torsion Bar Pair for Toyota 4Runner 1986-1995
- Suits the 1st and 2nd Gen Toyota 4Runner from 1986 to 1995 and Toyota Pickup/Hilux 1988-1995
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
- Sold as a set
- Specs: 1065mm long, 23.4mm bar thickness
Rated 5.00 out of 5(8 reviews) -
Amigo
Dobinsons Heavy Duty Torsion Bar Pair for Isuzu Amigo
- For Isuzu Amigo models – must measure before ordering
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
Rated 5.00 out of 5(3 reviews) -
Dobinsons
Dobinsons TB21-1550 Heavy Duty Torsion Bar Pair for Isuzu Amigo + Passport – 1145mm (45.08″)
- You MUST measure your stock torsion bar length before ordering here. Isuzu Amigo’s had a few variations worldwide on which torsion bars were used on each vehicle, so it’s required to measure yours first to ensure you order the correct size.
- TB21-1550 are 1145mm (45.08″), 30mm bar thickness
- Also may fit some Honda Passport models from 2/1999 to 2002, but be sure to measure your stock length first
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
Rated 5.00 out of 5(4 reviews) -
Dobinsons
Dobinsons TB21-1547 Heavy Duty Torsion Bar Pair for Isuzu Amigo – 1000mm (39.37″)
- You MUST measure your stock torsion bar length before ordering here. Isuzu Amigo’s had a few variations worldwide on which torsion bars were used on each vehicle, so it’s required to measure yours first to ensure you order the correct size.
- TB21-1547 are 1000mm (39.37″), 26mm bar thickness
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
Rated 5.00 out of 5(2 reviews) -
Frontier D21 D22 1985-2004
Dobinsons TB45-1446 Torsion Bar Pair for Nissan Frontier D22 1998-2004 892mm
- Suits Nissan Frontier and Navara D22 models from 1998-2004
- TB45-1446 measure 892mm in total length – check before ordering if you aren’t sure
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
- Photo for illustration purposes
Rated 5.00 out of 5(8 reviews) -
Frontier D21 D22 1985-2004
Dobinsons TB45-1456 Torsion Bar Pair for Nissan Frontier D21 1986-1997 1202mm
- Suits Nissan Frontier and Navara D21 models from 1986 to 1997
- TB45-1456 measure 1202mm in total length – check before ordering if you aren’t sure
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
- Photo for illustration purposes
Rated 5.00 out of 5(8 reviews)