You may be interested in…

• 

  • 
  • 
  • 

  Skid Plates + Sliders - 5th Gen 4Runner

  Ships FREE !!
  within 48 US States

  All Pro 5th Gen 4Runner IFS Skid Plate – Aluminum Black

  • Suits 2010-2024 Toyota 4Runner 5th Gen
  • Covers from the front bumper down to the first cross member
  • 1/4-inch thick 5052 Aluminum – Black Powder Coated
  • Optimal balance between strength and weight
  • At only 22 lbs, it’s half the weight of similar steel undercarriage protection
  • Save yourself from costly underbody repairs with this easy to install 5th Gen 4Runner skid plate
  • Skidplate not currently compatible with a diff drop kit – you would have to space it down
  • Easy, bolt-on installation using all factory hardware
  • Compatible with stock bumpers
  • Compatible with All-Pro 2010+ 4Runner Front Bumpers
  • Not tested with KDSS Vehicles
  • Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
  • Installation Instructions

  $440.00 Add to cart
• 

  • 
  • 
  • 

  Upper Control Arms

  Ships FREE !!
  within 48 US States

  Dobinsons Billet Aluminum UCA’s | 200 Series Land Cruiser

  • Super strong billet aluminum front upper control arms (UCA’s)
  • Suits 2008-2021 Toyota Land Cruiser 200 Series and Lexus LX570
  • Complete kit for both left and right hand side
  • OE-style sealed ball joints for a maintenance free life
  • OE-style high quality rubber bushings for maximum NVH dampening and longevity
  • No greasing or maintenance required at all, completely noise-free operation
  • Adjustable on-vehicle for quick and easy alignment.
  • Adjustable Camber and Caster for perfecting the vehicle’s handling
  • O-ring sealed ball joint cap for protection against the elements
  • Works for any lift height of 1.5″ or more
  • *Must reuse OEM Washers
  • Installation Instructions
  • We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
  • Photos for illustration purposes

  $1,195.00 Add to cart
• 

  • 
  • 
  • 

  Winches

  Ships FREE !!
  within 48 US States

  Warn 103253 VR Evo 10-S Winch 10K | Synthetic Rope

  • Winch; VR10-S; Vehicle Mounted; Vehicle Recovery Winch; 12 Volt Electric; 10000 Pound Line Pull Capacity; 90 Foot Synthetic Rope; Hawse Fairlead; Wired Remote; Planetary Gear Drive
  • Black Tactical Look Puts You At The Head Of The Off-Road Pack
  • Waterproof Albright® Contactor Control For The Ultimate In Reliability
  • One-Piece Tie Plate Replaces Tie Rods For Added Strength And Rigidity
  • Convertible Control Pack Allows Upright Or Low-Profile Winch Mounting
  • Powerful, Efficient Series-Wound Motor
  • Best-In-Class Load-Holding Cone Brake For Superior Control
  • Limited 7 Year Warranty
  • Winch Rating: 10000 Pound
  • Recommended Use: Jeep/Truck/SUV
  • Operation Type: Electric
  • Mount Type: Fixed Mount
  • Voltage: 12 Volt
  • Free Spooling: Yes
  • Line Length (FT): 90 Feet
  • Line Material: Synthetic
  • Mounting Pattern Size: 10 Inch Length X 4-1/2 Inch Width
  • Brake Type: Spring Applied Disc
  • Max Amp Draw: 358 Amp Draw At 1000 Pound
  • Gear Reduction Ratio: 218:1
  • Includes Mounting Hardware: Yes
  • Thermal Shutoff: No
  • Color: Black
  • Fairlead Type: Hawse
  • Remote Type: Wired
  • Line Speed At Max Pull: 5.2 Feet Per Minute At 1000 Pound
  • Electrical Control Type: Contactors
  • Motor Type: Series Wound
  • Drive Gear Type: Planetary
  • Line Diameter (IN): 3/8 Inch
  • Mounting Hole Quantity: 4
  • Drum Material: Steel
  • Estimated Install Time (Hours): 2
  • Warn Warranty information is all listed here: https://www.warn.com/warranties

  $864.99 Add to cart
• 

  • 
  • 
  • 

  Front Bumpers

  WARN 101330 Elite Series Stubby Front Winch Bumper for JL & JT

  • Suits Jeep Wrangler JL 2018-2023 (all models) and Jeep Gladiator JT 2020-2023 (all models)
  • This is a winch bumper – it’s highly recommended to only buy it if you plan to put a winch in, otherwise it will look unfinished from up top since there is no cover panel if no winch is installed
  • Photos are shown with all added accessories.  This is for the base bumper only, no winch or under protection plates are included
  • Certified To Withstand An Industry-Leading 12,000 Pounds Of Pulling Force, Without Deformation
  • Durable Flat Black Power-Coated Finish With Five-Stage Pretreat Process And Zirconium Nanotechnology, Engineered To Withstand 408 Hours Of Salt Spray Testing
  • Winch Positioned To Deliver Maximum Airflow To The Engine Bay
  • Stubby Version Allows For Mounting Of Driving Lights Above The Bumper
  • Integrated Off-Road Jack Lifting Points And Shackle-Mounting Tabs
  • Limited 1 Year Warranty
  • Type: 1-Piece
  • Tubular: No
  • Air Bag Compatible: No
  • Finish: Powder Coated
  • Color: Black
  • Material: Steel
  • Drilling Required: No
  • Hitch Type: Without Receiver
  • Maximum Gross Trailer Weight: Without Receiver
  • Maximum Tongue Weight: Without Receiver
  • With Grille Guard: No
  • With Grille Screen: No
  • With Bull Bar: Yes
  • With Winch Mount: Yes
  • Winch Compatible: Yes
  • Tow Hooks: With Tow Hook Mounts
  • D-Rings: With D-Rings
  • With Light Cutouts: No
  • Light Type: No Lights
  • With Mounting Hardware: Yes
  • With Skid Plate: No
  • With Spare Tire Mount: No
  • With License Plate Mount: Yes
  • With Jacking Points: No
  • With CB Antenna Mount: No
  • Estimated Install Time (Hours): 2
  • Installation Instructions
  • Optional Front Skid Plate Can Be Added

  $999.99 Add to cart
• 

  • 
  • 
  • 

  Dobinsons

  Ships FREE !!
  within 48 US States

  Dobinsons Tubular UCA Kit | Land Cruiser 200 Series + Lexus LX570

  • Complete assembled kit for both left and right hand side, includes new ball joints, OE style rubber frame bushings, and washers
  • These arms come fully assembled with the ball joints and bushings installed
  • Has 3 degrees of caster built in, no adjustability or settings required
  • Made from HSLA (High Strength Low Alloy) Steel
  • 5mm (0.2″) wall thickness
  • Powder coated black
  • Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
  • Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
  • Product Video
  • Also sold without ball joints

  $795.00 Add to cart
• Sale!

  

  • 
  • 
  • 

  Sale

  Ships FREE !!
  within 48 US States

  Icon Tubular Lower Trailing Arm Kit | 4Runner FJ Cruiser GX470 GX460 LC200

  • Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and Lexus GX460, Lexus LX570 and 200 Series 2008-2021
  • CNC machined & notched 1026 DOM steel construction
  • Multi durometer bushing for noise free operation and maximum angularity
  • No grease required for life of bushings
  • Quality JM16T PTFE-lined FK Rod Ends
  • Adjustable for various lift heights & driveline angles
  • Offset lower link front pivots improve roll steer
  • Tangent lower link barrel design reduces risk of off-road hangups
  • Integrated OEM emergency brake bracket mount
  • ICON1K tested in extreme off-road conditions
  • Fabricated components covered under ICON’s lifetime warranty
  • Sold as a Pair
  • Installation Guide
  • Warranty Info

  $577.45 Original price was: $577.45.$549.95Current price is: $549.95. Add to cart
• Sale!

  

  Wheels

  Ships FREE !!
  within 48 US States

  Warn 104489 Jack Hammer Wheel – 17×8.5″ 6×5.5″ 0 Offset – Black

  • Warn wheels made specifically for 6 Lug 2021+ Ford Bronco, 2019+ Ford Ranger, FJ Cruiser, 2005-2023 Toyota Tacoma, and 2003-2023 Toyota 4Runner, Lexus GX470 and GX460
  • 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 6 lugs, Uses OEM lug nuts
  • Sold Individually
  • Black Finish
  • 1 Piece Cast Aluminum Construction
  • Compatible With TPMS (Tire Pressure Monitoring System)
  • With Warn Logo Center Cap
  • Limited Lifetime Structural Warranty
  • Bolt Pattern Inch: Not Applicable
  • Bolt Pattern Millimeter: Not Applicable
  • Weight: 30 LBS
  • Diameter: 17
  • Width: 8.5
  • Offset: 0
  • Backspacing: 4.75
  • Material: Aluminum
  • Finish: Painted
  • Color: Black
  • Bolt Pattern Inch: 6×5.50
  • Bolt Pattern Inch: Not Applicable
  • Bolt Pattern Millimeter: 6×139.7
  • Bolt Pattern Millimeter: Not Applicable
  • Lug Nut Seat Type: 60 Degree Conical
  • Center Cap: See Replacement Items
  • Center Bore: 106.10
  • Lug Nut Design: Acorn
  • Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
  • Basic Design: Solid Center
  • With Inserts: No
  • Load Capacity: 2500
  • Size: 17×8.5
  • Max Tire Diameter: 40
  • Center Cap Design: Warn Logo
  • Structural Warranty: Lifetime
  • Quantity: Single
  • Construction: One Piece Cast
  • With Hub Centric Ring: Yes
  • Estimated Install Time (Hours): 0.5
  • Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
  • This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.

  $352.93 Original price was: $352.93.$299.99Current price is: $299.99. Add to cart
• Sale!

  

  Wheels

  Ships FREE !!
  within 48 US States

  Warn 104490 Jack Hammer Wheel – 17×8.5″ 6×5.5″ 0 Offset – Gun Metal

  • Warn wheels made specifically for 6 Lug 2021+ Ford Bronco, 2019+ Ford Ranger, FJ Cruiser, 2005-2023 Toyota Tacoma, and 2003-2023 Toyota 4Runner, Lexus GX470 and GX460
  • 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 6 lugs, Uses OEM lug nuts
  • Sold Individually
  • Gun Metal Finish
  • 1 Piece Cast Aluminum Construction
  • Compatible With TPMS (Tire Pressure Monitoring System)
  • With Warn Logo Center Cap
  • Limited Lifetime Structural Warranty
  • Bolt Pattern Inch: Not Applicable
  • Bolt Pattern Millimeter: Not Applicable
  • Weight: 30 LBS
  • Diameter: 17
  • Width: 8.5
  • Offset: 0
  • Backspacing: 4.75
  • Material: Aluminum
  • Finish: Painted
  • Color: Gun Metal
  • Bolt Pattern Inch: 6×5.50
  • Bolt Pattern Inch: Not Applicable
  • Bolt Pattern Millimeter: 6×139.7
  • Bolt Pattern Millimeter: Not Applicable
  • Lug Nut Seat Type: 60 Degree Conical
  • Center Cap: See Replacement Items
  • Center Bore: 106.10
  • Lug Nut Design: Acorn
  • Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
  • Basic Design: Solid Center
  • With Inserts: No
  • Load Capacity: 2500
  • Size: 17×8.5
  • Max Tire Diameter: 40
  • Center Cap Design: Warn Logo
  • Structural Warranty: Lifetime
  • Quantity: Single
  • Construction: One Piece Cast
  • With Hub Centric Ring: Yes
  • Estimated Install Time (Hours): 0.5
  • Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
  • This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.

  $352.93 Original price was: $352.93.$299.99Current price is: $299.99. Add to cart
• 

  • 
  • 
  • 

  Skid Plates + Sliders - 5th Gen 4Runner

  Ships FREE !!
  within 48 US States

  All Pro 5th Gen 4Runner IFS Skid Plate – Bare Steel

  • Suits 2010-2024 Toyota 4Runner 5th Gen
  • Covers from the front bumper down to the first cross member
  • 3/16-inch steel – Bare Steel – needs to be painted before installation
  • Optimal balance between strength and weight
  • Save yourself from costly underbody repairs with this easy to install 5th Gen 4Runner skid plate
  • Skidplate not currently compatible with a diff drop kit – you would have to space it down
  • Easy, bolt-on installation using all factory hardware
  • Compatible with stock bumpers
  • Compatible with All-Pro 2010+ 4Runner Front Bumpers
  • Not tested with KDSS Vehicles
  • Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
  • Installation Instructions

  $380.00 Add to cart
• 

  • 
  • 
  • 

  Gladiator JT 2020-2024+

  10% Off For Memorial Day!!
  Use coupon code MEMORIALDAY

  Jeep Gladiator Long Range Auxiliary Fuel Tank (17gal) 2020+ 3.6L V6

  • Suits Jeep Gladiator JT Trucks from 2020 onwards with the 3.6L V6 Gas engine
  • Not suitable for Diesel versions
  • This is an additional tank that fits on the left side of the driveshaft, it holds 17 gallons, and uses a transfer pump to fill your main tank when you hit a switch
  • 17 gallon capacity, fits on opposite side of OE gas tank for maximum clearance!!
  • 17 gallons plus your original 22 gallon tank gives you a capacity of 39 gallons in total!!
  • Tank fills using the OEM gas door and supplied parts
  • Tank uses a transfer pump to fill the main tank, 2L per minute pump rate
  • Exhaust modification required – exhaust needs to be replaced with aftermarket/custom or available LRA replacement exhaust kit listed below (tank goes where OE exhaust was routed).  Exhaust kit components
  • Fitting time – approximately 5.5 hours
  • Part Number JGJTPA
  • Fitting Instructions – Intended to be installed by a certified mechanic
  • This item ships on a pallet to the nearest Truck Freight terminal for you to pickup.  We will be in touch with you regarding the nearest freight terminal, unless you add home delivery fee below.
  • This product can not be sold or shipped to residents in California, as it will not pass SMOG.  Do not order this product if you live in California!!
  • MADE IN AUSTRALIA

  $2,245.00 Select options
• 

  • 
  • 

  Timbren

  Ships FREE !!
  within 48 US States

  Timbren ABSTORSEQ Active Off Road Rear Bump Stops | Toyota and Lexus SUV’s

  • Maintain Full Axle Travel
  • Smooth Axle Engagement and Disengagement
  • Enhance Suspension Performance
  • Progressive Spring Rate
  • Absorbs Energy and Cushions Road Shocks
  • Stronger Than OEM Bumpstops
  • Easy Installation
  • Satisfaction Guarantee
  • Lifetime Warranty
  • Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 Series

  • Specs:

    • 2,000 lb capacity
    • 4,800 lb bump load capacity
    • Overall kit height = 5”
    • Total deflected (compressed) height = 2.75”
    • Amount of deflection (compression) = 2.25”
  • Click here for instructions
  • Installation video from Exit Offroad
  • Depending on the overall travel of the suspension you’re running, bump stop extensions may be necessary to prevent shock bottom-outs.  Timbren make 2 options, they do not include any longer bolts which may be required
    • A25722-90F00 (1/2″ spacer)
    • A25723-90AD00 (1″ spacer)

  $269.36 Add to cart
• 

  • 
  • 
  • 

  Dobinsons

  Dobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460

  • Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser (all years), GX470, GX460
  • Comes with highly flexible rubber bushings installed, and also high quality polyurethane bushings and sleeves included in case you prefer to run poly instead of rubber
  • Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
  • Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
  • Zinc plated, then powder coated black, for the ultimate finish and protection

  $405.00 Add to cart
• 

  • 
  • 
  • 

  Winches

  Ships FREE !!
  within 48 US States

  Warn 103252 VR Evo 10 Winch 10K | Steel Cable

  • Winch; VR10; Vehicle Mounted; Vehicle Recovery Winch; 12 Volt Electric; 10000 Pound Line Pull Capacity; 90 Foot Wire Rope; Roller Fairlead; Wired Remote; Planetary Gear Drive
  • Durable, One-Piece Cast-Aluminum Tie-Plate For Added Strength And Durability
  • High-Performance Albright Contactor Delivers Maximum Reliability
  • IP68-Rated Waterproof Winch Construction Keeps The Elements Out
  • Control Packs Can Be Relocated For Low-Profile Installations
  • Two-In-One Remote With Wired AND Wireless Options For Ease Of Use And Versatility
  • A Powerful Series-Wound Motor And Planetary Gear Train Deliver Faster Line Speed Under Load, With Lower Amp Draw
  • Limited Lifetime Warranty On Mechanical Components And Limited 7 Year Warranty On Electrical Components
  • Warn Warranty information is all listed here: https://www.warn.com/warranties
  • Warn 103252 Winch Rating: 10000 Pound
  • Recommended Use: Jeep/Truck/SUV
  • Operation Type: Electric
  • Mount Type: Fixed Mount
  • Voltage: 12 Volt
  • Free Spooling: Yes
  • Warn 103252 Line Length (FT): 90 Feet
  • Line Material: Steel
  • Mounting Pattern Size: 10 Inch Length X 4-1/2 Inch Width
  • Brake Type: Spring Applied Disc
  • Max Amp Draw: 358 Amp Draw At 10000 Pound
  • Gear Reduction Ratio: 218:1
  • Includes Mounting Hardware: Yes
  • Thermal Shutoff: No
  • Color: Black
  • Fairlead Type: Roller
  • Remote Type: Wired
  • Line Speed At Max Pull: 5.2 Feet Per minute At 10000 Pound
  • Electrical Control Type: Contactors
  • Motor Type: Series Wound
  • Drive Gear Type: Planetary
  • Line Diameter (IN): 0.354 Inch
  • Mounting Hole Quantity: 4
  • Drum Material: Steel
  • Estimated Install Time (Hours): 2

  $649.99 Add to cart
• 

  • 
  • 
  • 

  Steering Upgrades

  Ships FREE !!
  within 48 US States

  Rusty’s HD Aluminum Tie Rod Assembly | JL Wrangler + JT Gladiator

  • Fits: 2018-Current Jeep JL Wrangler and 2020-Current Jeep JT Gladiator Models
  • A tie rod is the steering component that connects one wheel to the other, and you adjust toe with this
  • Massive 1.825″ 7075 SOLID Aluminum Tie Rod
  • Adjustable forged ends are threaded for adjustment without removing the tie rod from the vehicle
  • HD jam nuts
  • Serrated Lock Washers
  • The strongest JL/JT Tie Rod you can buy
  • Complete assembly from one side to the other, nothing else needed
  • INSTALLATION INSTRUCTIONS
  • Built in Rainbow City, Alabama, USA
  • Also made in a steel DOM version

  $502.00 Select options
• 

  • 
  • 
  • 

  Suspension

  Ships FREE !!
  within 48 US States

  Dobinsons Tubular UCA Kit | Tacoma Hilux Fortuner 2005-23

  • Complete assembled kit for both left and right hand side, includes new ball joints, ball joint caps, OE style rubber frame bushings, and washers
  • Has 3 degrees of caster built in, no adjustability or settings required
  • Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
  • Works for any lift height of 1.5″ or more. Any height less than that, a proper wheel alignment may not be able to be achieved
  • Uses replaceable Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
  • Product Video
  • Also sold without ball joints

  $795.00 Add to cart
• 

  • 
  • 
  • 

  Steering Upgrades

  Ships FREE !!
  within 48 US States

  Rusty’s HD Tie Rod Assembly | JL Wrangler + JT Gladiator

  • Fits: 2018-Current Jeep JL Wrangler and 2020-Current Jeep JT Gladiator Models
  • A tie rod is the steering component that connects one wheel to the other, and you adjust toe with this
  • Massive 1.75″ x 0.250-wall DOM tubing Tie Rod bar
  • Adjustable forged ends are threaded for adjustment without removing the tie rod from the vehicle
  • HD jam nuts
  • Serrated Lock Washers
  • The strongest JL/JT Tie Rod you can buy
  • Complete assembly from one side to the other, nothing else needed
  • INSTALLATION INSTRUCTIONS
  • Built in Rainbow City, Alabama, USA
  • Also made in an Aluminum version

  $427.00 Select options
• 

  • 
  • 
  • 

  Skid Plates + Sliders - 5th Gen 4Runner

  Ships FREE !!
  within 48 US States

  All Pro 5th Gen 4Runner IFS Skid Plate – Bare Aluminum

  • Suits 2010-2024 Toyota 4Runner 5th Gen
  • Covers from the front bumper down to the first cross member
  • 1/4-inch thick 5052 Aluminum – Bare
  • Optimal balance between strength and weight
  • At only 22 lbs, it’s half the weight of similar steel undercarriage protection
  • Save yourself from costly underbody repairs with this easy to install 5th Gen 4Runner skid plate
  • Skidplate not currently compatible with a diff drop kit – you would have to space it down
  • Easy, bolt-on installation using all factory hardware
  • Compatible with stock bumpers
  • Compatible with All-Pro 2010+ 4Runner Front Bumpers
  • Not tested with KDSS Vehicles
  • Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
  • Installation Instructions

  $380.00 Add to cart
• 

  Upper Control Arms

  Pair of UCA Pivot Bolts and Nuts | Toyota and Lexus

  • This is a pair of factory size upper control arm pivot bolts and nuts replacements to service two control arms
  • Commonly referred to “as the long UCA bolt”
  • Services both control arms at once
  • Does not come with any washers.  New aftermarket UCA’s usually come with the necessary washers
  • Vehicle Fitment
  • • 2003-2009 Toyota 4Runner
    • 2010-2024 Toyota 4Runner
    • 2005-2015 Toyota Tacoma
    • 2016-2023 Toyota Tacoma
    • 2006+ FJ Cruiser (all years)
    • 2003-2009 Lexus GX470
    • 2010-2023 Lexus GX460
    • Toyota Hilux Vigo
    • Toyota Hilux Revo
    • Toyota Fortuner
    • Toyota Prado 120
    • Toyota Prado 150
  • Bolt Grade: 10.9
  • Head Drive Type: Hex
  • Length: 351 mm
  • Material: Steel
  • SAE or Metric: Metric
  • Thread Diameter: 14 mm
  • Thread Length: 28.7 mm
  • Thread Size: 14 mm
  • Thread Type: Fine

  $69.00 Add to cart