You may be interested in…

• 

  • 
  • 

  Fox

  Fox Back Up Spanner Wrench for 2.5″ Coilovers

  • Spanner Wrench
  • For 2.5 Coil Overs
  • Anodized laser etched billet aluminum
  • Back Up Adjustment (removing preload)

  $61.99 Add to cart
• 

  • 
  • 
  • 

  GX470 (2002-2009)

  Dobinsons 1″ to 3.5″ Lift Kit for Lexus GX470 (All Options)

  • Full Dobinsons Complete Suspension kit for Lexus GX470 from 2003 to 2009, with every possible option listed on one page
  • Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
  • Coils are specifically suited to the additional accessory load (weight) on the vehicle
  • Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
  • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
  • Base Kit Includes 2 Front Twin Tube Struts, 2 Rear Twin Tube Shocks, and 4 Standard Coil Springs
  • Select the type of struts and shocks you want as well as all possible add-ons down below
  • Choose from Dobinsons Classic Twin Tube shocks, IMS Monotube, or MRA 3-way adjustable remote resi shocks
  • See note below in description about KDSS models

  From $1,200.00 Select options
• 

  • 
  • 

  Suspension

  Dobinsons GS59-705 Rear Shocks | FJ Cruiser 4Runner GX470 GX460

  • Suits Toyota 4Runner 2003-2024 and Toyota FJ Cruiser, Lexus Gx470 and GX460 models 2006 to 2023, with 0-2.5″ of lift
  • Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
  • Superior Design, thicker walls, longer travel
  • Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
  • Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
  • Matched to compliment Dobinsons Complete Suspension Systems
  • Dobinsons GS59-705 Specifications: 590mm extended, 355mm compressed, 50mm body size
  • Made in Yellow and Black

  $310.00 Select options
• 

  All Pro Offroad

  Ships FREE !!
  within 48 US States

  All Pro Tacoma IFS Skid Plate – Bare Steel

  • Suits 2005-2023 Toyota Tacoma 4×4 Models
  • Covers from the front bumper down to the first cross member
  • 3/16-inch steel – Bare Steel – needs to be painted before installation
  • Optimal balance between strength and weight
  • Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
  • Easy, bolt-on installation using all factory hardware
  • Compatible with stock bumpers
  • Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
  • Installation Instructions

  $380.00 Add to cart
• 

  • 
  • 
  • 

  GX460 (2010-2023)

  Dobinsons 1.5-3.5″ Lift Kit for Lexus GX460 2010 to 2023 (all options)

  • Every suspension option from Dobinsons to lift your Lexus GX460 all on one page
  • Here you can lift from a low height up to the maximum bolt-on lift height by making your selections below
  • Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
  • Coils are specifically suited to the additional accessory load (weight) on the vehicle
  • Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
  • High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
  • Base Kit Includes 2 Front Twin Tube Struts, 2 Rear Twin Tube Shocks, and 4 Coil Springs
  • You can choose to upgrade to the higher end IMS or MRA struts and shocks on this page in the drop down menus

  From $1,200.00 Select options
• 

  • 
  • 
  • 

  Suspension

  Ships FREE !!
  within 48 US States

  Dobinsons MRA59-A940 3-Way Adjustable MRA Rear Shocks

  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you
  • 10 Stage High Speed Compression – For aggressive, high speed offroading through ruts and holes
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 50mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 56mm (2.2″) O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMITM CNC machined components for precise tolerances
  • Parker Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir, Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg, CNC TIG Precision Welded Body End Mounts
  • EDP Surface Protection, Direct Bolt-On Design
  • Fully Rebuildable Design, Full 2 year limited warranty, no set rebuild time period
  • 14.2″ compressed length, 24.2″ extended length
  • Installation Instructions
  • Works with factory brake line length and OE bump stop length, no extensions required
  • Includes reservoir brackets and hardware
  • SOLD IN PAIRS

  $1,150.00 Add to cart
• 

  • 
  • 
  • 

  Exceptions

  Ships FREE !!
  within 48 US States

  Back in Stock Now!!

  Dobinsons IMS59-50701 IMS Shocks | Toyota and Lexus (0-3″ lift)

  • Suits 2003-2024 4Runner (4th and 5th Gen), All FJ Cruisers, Lexus GX470 and GX460, Toyota Prado 120 & 150, suitable for 0 – 3″ of lift
  • Fully rebuildable and re-valvable
  • SOLD IN PAIRS
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
  • Full 2 year limited warranty, no set rebuild time period
  • Watch the video on IMS here: https://youtu.be/Npfx40VD3kM
  • Specifications: 598mm extended, 389mm compressed

  $580.00 Add to cart
• 

  • 
  • 

  4Runner 5th Gen (2010-2024)

  Dobinsons GS59-701 Rear Shocks | Toyota 4Runner FJ Cruiser GX470 GX460

  • Suits Toyota 4Runner 2003-2024, Toyota FJ Cruiser models 2006 to 2016, Lexus GX470, Lexus GX460, and Toyota Prado 120 and Toyota Prado 150 with 0-3″ of lift
  • Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
  • Superior Design, thicker walls, longer travel
  • Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
  • Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
  • Matched to compliment Dobinsons Complete Suspension Systems
  • Dobinsons GS59-701 Specifications: 605mm extended, 362mm compressed, 54mm body size
  • Available in Yellow or Black

  $310.00 Select options
• 

  • 
  • 
  • 

  Upper Control Arms

  Ships FREE !!
  within 48 US States

  Dobinsons Billet Aluminum Adjustable UCA’s | Toyota Tacoma 2005-23

  • Super strong billet aluminum front upper control arms (UCA’s) for Toyota Trucks and SUV’s
  • Suits 2005-2023 Toyota Tacoma, 2005+ Toyota Hilux, 2005+ Toyota Fortuner
  • Complete kit for both left and right hand side
  • OE-style sealed ball joints for a maintenance free life
  • OE-style high quality rubber bushings for maximum NVH dampening and longevity
  • No greasing or maintenance required at all, completely noise-free operation
  • Adjustable on-vehicle for quick and easy alignment.
  • Adjustable Camber and Caster for perfecting the vehicle’s handling
  • O-ring sealed ball joint cap for protection against the elements
  • Works for any lift height of 1.5″ or more
  • Installation Instructions
  • We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer

  $1,195.00 Add to cart
• 

  • 
  • 
  • 

  All Pro Offroad

  Ships FREE !!
  within 48 US States

  All Pro Tacoma IFS Skid Plate – Aluminum Black

  • Suits 2005-2023 Toyota Tacoma 4×4 Models
  • Covers from the front bumper down to the first cross member
  • 1/4-inch aluminum construction – Black Powder Coated Steel
  • Optimal balance between strength and weight
  • Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
  • Easy, bolt-on installation using all factory hardware
  • Compatible with stock bumpers
  • Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
  • Installation Instructions

  $440.00 Add to cart
• 

  SPC

  SPC 87520 – Nissan Frontier Xterra Alignment Cam Kit (2 Pairs)

  • Suits 2005+ and 2022+ Nissan Frontier and Nissan Xterra (2005-2015)
  • These cams are designed to install in the lower control arms for camber and caster adjustment
  • They replace the original non-adjustable lower control arm bolts
  • Front Adjustment range: Camber/Caster ±2.00°
  • Installation time: .3 hr/side
  • The purchase includes 2 pairs, enough for 1 vehicle
  • Installation Guide

  $90.00 Add to cart
• 

  Brake Lines

  Extended Rear Brake Lines +4″ for Toyota Tacoma 2005-2023 (Black)

  • American made D.O.T. Certified extruded teflon core, stainless steel braided and coated with a PVC cover
  • 4″ longer than stock for long travel suspension lifts
  • Suits the following vehicles: Toyota Tacoma 2005-2015, Toyota Tacoma 2016+
  • Can be used with any lift height, however these are extra long for long travel rear shocks
  • Sold as a pair with new retaining clips
  • This set is BLACK in color

  $95.00 Add to cart
• 

  • 
  • 

  Fox

  Fox Preload Spanner Wrench for 2.5″ Coilovers

  • Spanner Wrench
  • For 2.5 Coil Overs
  • Anodized laser etched billet aluminum
  • Pre-Load Adjustment

  $61.99 Add to cart
• 

  • 
  • 
  • 

  Winches

  Ships FREE !!
  within 48 US States

  Warn 103255 VR Evo 12-S Winch 12K | Synthetic Rope

  • Winch; VR12-S; Vehicle Mounted; Vehicle Recovery Winch; 12 Volt Electric; 12000 Pound Line Pull Capacity; 90 Foot Synthetic Rope; Hawse Fairlead; Wired Remote; Planetary Gear Drive
  • Black Tactical Look Puts You At The Head Of The Off-Road Pack
  • Waterproof Albright® Contactor Control For The Ultimate In Reliability
  • One-Piece Tie Plate Replaces Tie Rods For Added Strength And Rigidity
  • Convertible Control Pack Allows Upright Or Low-Profile Winch Mounting
  • Powerful, Efficient Series-Wound Motor
  • Best-In-Class Load-Holding Cone Brake For Superior Control
  • Limited 7 Year Warranty
  • Winch Rating: 12000 Pound
  • Recommended Use: Jeep/Truck/SUV
  • Operation Type: Electric
  • Mount Type: Fixed Mount
  • Voltage: 12 Volt
  • Free Spooling: Yes
  • Line Length (FT): 90 Feet
  • Line Material: Synthetic
  • Mounting Pattern Size: 10 Inch Length X 4-1/2 Inch Width
  • Brake Type: Spring Applied Disc
  • Max Amp Draw: 396 Amp Draw At 12000 Pound
  • Gear Reduction Ratio: 234:1
  • Includes Mounting Hardware: Yes
  • Thermal Shutoff: No
  • Color: Black
  • Fairlead Type: Hawse
  • Remote Type: Wired
  • Line Speed At Max Pull: 4 Feet Per Minute At 12000 Pound
  • Electrical Control Type: Contactors
  • Motor Type: Series Wound
  • Drive Gear Type: Planetary
  • Line Diameter (IN): 3/8 Inch
  • Mounting Hole Quantity: 4
  • Drum Material: Steel
  • Estimated Install Time (Hours): 2
  • Warn Warranty information is all listed here: https://www.warn.com/warranties

  $979.98 Add to cart
• 

  • 
  • 
  • 

  Exceptions

  Ships FREE !!
  within 48 US States

  Back in Stock Now!!

  Dobinsons IMS59-50220 Front IMS Struts | 05-23 Tacoma GX470 03-09 4Runner 06-09 FJ Cruiser

  • Fully rebuildable and re-valvable
  • Extended Travel – 567mm extended, 417mm compressed
  • SOLD IN PAIRS
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
  • Full 2 year limited warranty, no set rebuild time period
  • Instructions for setting coil seat height

  $650.00 Add to cart
• 

  • 
  • 
  • 

  All Pro Offroad

  Ships FREE !!
  within 48 US States

  All Pro Tacoma IFS Skid Plate – Raw Aluminum

  • Suits 2005-2023 Toyota Tacoma 4×4 Models
  • Covers from the front bumper down to the first cross member
  • 1/4-inch aluminum construction – Raw aluminum
  • Optimal balance between strength and weight
  • Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
  • Easy, bolt-on installation using all factory hardware
  • Compatible with stock bumpers
  • Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
  • Installation Instructions

  $380.00 Add to cart
• 

  • 
  • 
  • 

  Suspension

  Dobinsons High Clearance Outer CV Boot Kit | Tacoma 4Runner FJ Cruiser GX470 GX460

  • Complete OUTER kit includes 2 new OUTER boots, grease, and required clips – For 1 vehicle
  • If you’re doing a full CV rebuild, you may need more CV grease from your local parts store
  • Made of high quality rubber for maximum life
  • Great for lifted SUV’s and Trucks with high CV angles
  • Suits Lexus GX470, Lexus GX460, Toyota 4Runner 4th and 5th Gen (all from 2003-2024), Toyota Tacoma 2nd and 3rd Gen (all from 2005-2023), Toyota FJ Cruiser (all years)
  • Inside shape is round
  • These still install the old fashioned way without custom stretch boot tools needed

  $60.00 Add to cart
• 

  • 
  • 
  • 

  Recovery

  MAXTRAX MKII Mounting Pins (17mm bolts)

  • Sold in a set of four, enough to mount one or two sets of MAXTRAX (two or four boards total).
  • 17mm bolt length, see attached photo for description
  • 40mm and 17mm refers to the length of bolt used to mount the pins- both the 40mm and 17mm pins will hold either one or two sets of MAXTRAX.
  • Designed to mount to your MAXTRAX to wherever you can mount these pins on your vehicle
  • M10 stainless bolt has a provision for a small padlock
  • Please Note: Antiseize recommended on install
  • SOLD AS A SET OF FOUR

  $65.99 Add to cart
• 

  Upper Control Arms

  Pair of UCA Pivot Bolts and Nuts | Toyota and Lexus

  • This is a pair of factory size upper control arm pivot bolts and nuts replacements to service two control arms
  • Commonly referred to “as the long UCA bolt”
  • Services both control arms at once
  • Does not come with any washers.  New aftermarket UCA’s usually come with the necessary washers
  • Vehicle Fitment
  • • 2003-2009 Toyota 4Runner
    • 2010-2024 Toyota 4Runner
    • 2005-2015 Toyota Tacoma
    • 2016-2023 Toyota Tacoma
    • 2006+ FJ Cruiser (all years)
    • 2003-2009 Lexus GX470
    • 2010-2023 Lexus GX460
    • Toyota Hilux Vigo
    • Toyota Hilux Revo
    • Toyota Fortuner
    • Toyota Prado 120
    • Toyota Prado 150
  • Bolt Grade: 10.9
  • Head Drive Type: Hex
  • Length: 351 mm
  • Material: Steel
  • SAE or Metric: Metric
  • Thread Diameter: 14 mm
  • Thread Length: 28.7 mm
  • Thread Size: 14 mm
  • Thread Type: Fine

  $69.00 Add to cart
• Sale!

  

  • 
  • 
  • 

  Sale

  Ships FREE !!
  within 48 US States

  Icon Billet Lower Trailing Arm Kit | 4Runner FJ Cruiser GX470 GX460 LC200

  • Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and Lexus GX460, Lexus LX570 and 200 Series 2008-2021
  • On vehicle length adjustment for different ride heights and pinion angles using ICON’s Double Adjuster System
  • Vehicle specific, high clearance design for reduced link contact with obstacles
  • Replaceable Nylon ROCK Slider to protect the link from damage
  • CNC machined 6061 aluminum construction
  • Large FK Bearing JMX16T PTFE-lined rod ends
  • Greaseable, multi-piece polyurethane bushings for maximum angularity and noise isolation
  • Covered by ICON’s Limited Lifetime Warranty
  • Sold as a Pair
  • Installation Guide
  • Warranty Info

  $976.45 Original price was: $976.45.$929.95Current price is: $929.95. Add to cart
• 

  • 
  • 
  • 

  Recovery

  MAXTRAX MKII Mounting Pins (40mm bolts)

  • Sold in a set of four, enough to mount one or two sets of MAXTRAX (two or four boards total).
  • 40mm bolt length, see attached photo for description
  • 40mm and 17mm refers to the length of bolt used to mount the pins- both the 40mm and 17mm pins will hold either one or two sets of MAXTRAX.
  • Designed to mount to your MAXTRAX to wherever you can mount these pins on your vehicle
  • M10 stainless bolt has a provision for a small padlock
  • Please Note: Antiseize recommended on install
  • SOLD AS A SET OF FOUR

  $65.99 Add to cart
• 

  • 
  • 
  • 

  Winches

  Ships FREE !!
  within 48 US States

  OVS SCAR Waterproof 12K Winch | Synthetic Rope | Wireless Remote

  • Single Line Rated Pull: 12,000lb
  • Motor: 7.0hp Series Wound
  • Waterproof: IP68 Rated
  • Voltage: 12V
  • Control: Wireless Remote w. 11.5’ Lead with Built in Lithium Battery
  • Gear Train: 3 Stage Planetary Gear Systems with Ring Gear
  • Gear Ratio: 218:1
  • DB Output: Low (it’s quiet)
  • Clutch: Rotating Ring Gear
  • Braking Action: Automatic Out-Of-Drum
  • Drum Size: 2.5” x 8.8”
  • Mounting Bolt Pattern: 10” x 4.5”
  • Overall Dimensions: 21.3” L x 6.3” W x 7.9” H
  • Line Speed: 42’ Per Minute
  • Steel Cable: 3/8” x 85’
  • Hook: Heavy Duty with Clip
  • Fairlead: Aluminum Hawse Fairlead
  • Electric Cable: 70” x 25 mm2
  • Solenoid: 500A (Heavy – Duty)
  • Recommended Battery: 650CCA Minimum.
  • Weight: 66 lbs
  • Warranty: Limited Lifetime Warranty Mechanical,
  • 5 Year Electrical

  $599.99 Add to cart
• 

  • 
  • 
  • 

  MRA Remote Resi 3-Way Adjustable Monotube

  Ships FREE !!
  within 48 US States

  Dobinsons MRA59-A701 3-Way Adjustable MRA Shocks

  • Suits 2003-2024 4Runner (4th and 5th Gen), All FJ Cruisers, Lexus GX470 and GX460, Toyota Prado 120 & 150, suitable for 0 – 3″ of lift
  • 3-way adjustable valving – adjust high and low speed compression and rebound
  • Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 50mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Direct Bolt-On Shock Design
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period
  • 609mm extended, 389mm compressed
  • SOLD IN PAIRS
  • Now comes with a longer hose and different mounting instructions

  $1,150.00 Add to cart
• 

  • 
  • 

  Firestone

  Firestone 4108 Coil-Rite Rear Helper Airbags for 2-3″ Lift | 4Runner FJ Cruiser GX470 GX460

  • Suits all 3rd/4th/5th Gen 4Runners, FJ Cruiser, GX470, GX460 WITH 2-3″ of Lift
  • Substitute Option – Air Lift 60769
  • These are longer than the Firestone 4135 for lifted vehicles
  • Complete kit – 1 per vehicle
  • Inserts inside your rear coil springs to add additional load support
  • Manually inflate or deflate the air bags to add or remove support or height
  • Perfect for people who tow, or regularly load up fully and need additional height or support
  • Route the airlines to your rear bumper or a suitable place to easily add or remove air to the bags
  • Fitment Notes: NOTE: Custom modifications may be required for lifted applications to ensure air bags are properly supported. If using on a lifted application, do not follow Firestone bump stop/jounce cut instructions. You will need to determine where to cut based on your lift amount (not cutting off as much depending on lift height)
  • Installation Manual, Click Here

  $144.12 Add to cart