45 Series Land Cruiser - FJ45, HJ45 (pre 8/1980)
Showing all 27 resultsSorted by popularity
-
DobinsonsDobinsons UB59-453-3K U-Bolt Set (1 Pair)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 2 U-bolts, enough for 1 leaf spring
- Requires 2″ lift leaf springs to ensure proper fitment
- See below for vehicle fitment list
- 83mm inner width x 195mm long x 14mm bolt size
- Some vehicles require the holes in the u-bolt plates to be drilled or reamed out a little to fit the thicker Dobinsons u-bolts
- Photo for illustration purposes only. These u-bolts are round at the top
- SOLD in pairs because some Toyotas need 3 per vehicle, some need 2
(5 reviews) -
DobinsonsDobinsons UB59-453-1K U-Bolt Kit (2 Pairs)
- UB59-453-1K Suits the rear of the Toyota Landcruiser 60/62 Series 1980-1989, and 1984-1990 Toyota Land Cruiser FJ75, HJ75, BJ75, as well as several other vehicles.
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 4 U-bolts, enough for 1 vehicle (2 pairs)
- Requires 2″ lift leaf springs to ensure proper fitment
- Photo for Illustration purposes only. These u-bolts are round at the top
- 83 inside with x 220 long x 14mm bolts size / 3.25″ x 8.66″ x 0.55″
(9 reviews) -
DobinsonsTHIS SHIPS FREE
within 48 US StatesDobinsons IMS59-50649 2.2″ IFP Rear Shocks Pair
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- 614mm extended, 409mm compressed
- Should be run with a suspension lift of 1.75″ or more
- See Vehicle Fitment List Down Below
(15 reviews) -
SuspensionDobinsons GS59-649 Rear Twin Tube Shocks Pair – Comfort Option
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- GS59-649 is a comfort version (softer) of the GS59-651
- See full vehicle list below for fitment
- 591mm extended, 363mm compressed, 51mm body diameter
(9 reviews) -
Replacement BushingsDobinsons Lower Shock Bushings (2 Halves) for -682 -687 -685 -649 -651 -637 -703 -115 -913 -915 -631 -229
- Dobinsons replacement rear lower shock bushing – 2 half bushings for 1 shock
- Suits a variety of Dobinsons shocks, part numbers ending in -682, -687, -685, -649, -651, -637, -703, -115, -913, -915, -631, -229
- Full list of part numbers this fits is below
- This is for a single bushing set only for 1 shock
- 2 half bushings, they go in from either side of the lower eyelet to form a complete bushing
- High quality natural rubber bushing
(0 reviews) -
40 Series Land Cruiser Early (1960-1979)Dobinsons PB59-1013K Polyurethane Leaf Spring Bush Kit for FJ/BJ40 FJ40/BJ45 25mm Eyes
- Suits 40/45 Series Land Cruisers with 25mm spring eyes front and rear
- For any lift height, or no lift. These are OE replacement bushings.
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of leaf springs in the front or rear
- Order 2 kits to do front and rear of the vehicle
- Greasable bolts are sold in pairs, sold separately
(4 reviews) -
40 Series Land Cruiser Early (1960-1979)Dobinsons SK59-002 Greasable Shackle Kit Pair | Toyota 40/45 Series
- Suits Front or Rear FJ40/BJ40 up to 1979 with 25mm spring eyes, and Front FJ45/BJ45 with 25mm spring eyes up to 1979
- Twin hole greasable design
- Reduces friction in bushes, creating a more comfortable ride
- Heavy duty design and provide simple service through external grease nipples
- Sold as a pair to replace the original shackles
- Incredibly tough and durable gold zinc plating
- Photo is of actual shackles, color may vary
(8 reviews) -
DobinsonsDobinsons SP59-006 Greasable Pin Kit (Pair) Land Cruiser 40/45 Series to 1979
- Suits 25mm leaf springs in front and rear of FJ40, BJ40 and the front of FJ45, BJ45 with 25mm spring eyes and 15mm bolts
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Purchase includes 1 pair (2 pieces) of greasable pins for the fixed end of a leaf spring
- Photo for reference only, actual product may appear different
(3 reviews) -
DobinsonsDobinsons SD59-823 Big Bore Steering Damper | Land Cruiser 40 45 46 47 55 series
- Suits Toyota Landcruiser 40 45 46 47 and 55 series (all years and variants of these models)
- Induction Hardened Rods for strength, no Viscosity Drop due to High Shear Stability
- Cellular Foam Cell Insert, Teflon Piston Rings
- Excellent Viscosity Temperature Performance
- NOK Triple Lip Oil Seals, High Quality Fuchs German Oil
- Replaces OE steering damper, bolts into place
- Photo for illustration purposes
(6 reviews) -
Dobinsons
Dobinsons UB59-450K U-Bolt Set (1 Pair)
- Suits Toyota 40/45/55 Series Front right hand side with 25mm spring eyes (up to 1979 with smaller leaf springs)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 2 U-bolts, enough for 1 leaf spring
- Some vehicle require multiple pairs
- See below for vehicle fitment list
- 2 sizes included, both are 83mm inner width and 14mm bolts, 1 is 195mm and the other is 215mm long
- Photo for illustration purposes only. These u-bolts are round at the top, 1 is longer than the other
- SOLD in pairs because some Toyotas need 1 per vehicle
(0 reviews) -
40 Series Land Cruiser Late (1980-1984)THIS SHIPS FREE
within 48 US StatesDobinsons IMS59-50635 2.2″ IFP Shocks Pair Toyota Land Cruiser FJ40 BJ40 FJ45
- Suits the front end of all FJ40 Land Cruisers and all FJ45/47 front ends (25mm and 35mm spring eyes)
- Suits the rear end of early model FJ40’s up to 01/1975
- SOLD IN PAIRS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
(16 reviews) -
SuspensionTHIS SHIPS FREE
within 48 US StatesDobinsons MRA59-A649 3-Way Adjustable Rear Shocks Pair for Toyota
- Suits various vehicles, list is down below
- 3-way adjustable valving – adjust high and low speed compression and rebound
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your springs, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- 626mm extended, 400mm compressed
- 22mm / 7/8″ shaft diameter
- Full 2 year limited warranty, no set rebuild time period
- Should be run with a suspension lift of 1.75″ or more
(15 reviews) -
Suspension
Dobinsons GS59-651 Rear Twin Tube Shocks Pair
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- See list of suitable vehicles down below
- 591mm extended, 363mm compressed
- 60mm diameter outer tube size
- Attention FJ40 owners – Earlier models used the same length shocks front and rear, later version used longer rear shocks
Build date Pre 01/1975 use GS59-635
Build date 01/1975 onwards Use: GS59-651 (these on this page are longer than the front shocks)
(10 reviews) -
Differential | DrivetrainTHIS SHIPS FREE
within 48 US StatesUltimate Front Toyota Knuckle Rebuild Kit – Both Sides
- Suits TOYOTA PICKUP (1979-1985), TOYOTA 4RUNNER (1985), TOYOTA LAND CRUISER FJ40 (1979-1983), TOYOTA LAND CRUISER FJ50 (1979-1980), TOYOTA LAND CRUISER FJ60 (1980-1990), TOYOTA LAND CRUISER FJ70 – Models with 4-stud knuckles only (1984-CURRENT)
- The Ultimate Toyota Knuckle Rebuild Kit includes gaskets, upgraded seals, high-quality bearings and more. We’ve even included the specialty tools needed to complete the job. Simply put, this is the best, most complete knuckle rebuild kit available!
- Includes:
- (1) 54mm Spindle Socket
- (1) Knuckle Pull Scale
- (1) Upgraded HD Inner Axle Seals
- (2) Koyo* Front Wheel Bearing Kits (Includes 2 Inner and 2 Outer Bearings and 2 Spindle Seals)
- (1) Trail-Safe Wiper Seals with Rock Rings and Extended Hardware
- (2) Brass Spindle Bushings
- (2) Wheel Bearing Nut Kits
- (1) Spindle Stud Kit
- (4) Koyo** Trunnion Bearings
- (1) Trunnion Bearing Shim Pack
- (2) Inner Steel Rings that go behind the Wiper Seals
- (2) Inner Spindle Gaskets
- (2) Outer Spindle Gaskets
- (2) Hub Inner Gaskets
- (2) Hub Outer Gaskets
- (2) Hub Dial O-Rings for Aisin Hubs
- (1) Toyota Ultimate Backing Plate Eliminator Kit
- * Some kits may contain Timken bearing kits when Koyo bearings are not available.
- ** Some kits may contain Schaeffler/FAG trunnion bearings when Koyo bearings are not available.
- Does not fit FJ80 Land Cruiser front axles – use this other kit instead
- Video own below shows the installation process
- 1 kit does both sides of the front axle
(8 reviews) -
SuspensionDobinsons GS59-635 Twin Tube Shocks Pair | Toyota Land Cruiser 40 45 46
- Vehicle Fitment:
- 1960-1984 Toyota Land Cruiser FJ40 and BJ40 Front, and Rear up until 01/1975 build date
- 1960 to 1974 Toyota Land Cruiser FJ40, BJ40 and BJ42 Rear
- Up to 1985 Toyota Land Cruiser FJ45, HJ47, BJ45, BJ46 Front
- 1960-1984 Toyota Land Cruiser FJ40 and BJ40 Front, and Rear up until 01/1975 build date
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- See full vehicle list below for fitment
- 488mm extended, 308mm compressed
- 50mm diameter tube
- Attention FJ40 owners – Earlier models used the same length shocks front and rear, later version used longer rear shocks
Build date Pre 01/1975 use GS59-635
Build date 01/1975 onwards Use: GS59-651
(10 reviews) -
DobinsonsDobinsons Single Caster Wedge 70MM Wide – 3 Degrees
- 3 Degree Caster shim can be used to correct front caster / pinion angle or rear pinion angle on a 70mm wide leaf spring
- Sold individually
- Suits the following Dobinsons leaf spring part numbers:
- BJ42-7L-F
- HJ40-7L-F
- HJ45-6+3-R
- HJ45-7+3-R
- HJ45-7L-F
- HJ45-8L-F
- HJ47-6+3-R
- HJ47-7+3-R
- HJ47-7L-F
- HJ47-8L-F
- HJ60-5L-F
- HJ60-6L-F
- HJ60-7L-F
- HJ60-7L-R
- HJ60-8L-R
- HJ61-7L-F
- HJ61-7L-R
- HJ61-8L-R
- HJ75-6+2-R
- HJ75-7+2-R
- HJ75-8+2-R
- HJ75-7L-F
- HJ75-8L-F
- HZJ75-6+2-R
- HZJ75-7+2-R
- HZJ75-8+2-R
- HZJ75-7L-F
- HZJ75-8L-F
- L43-014-R
- L43-015-R
- L43-016-R
- L45-061-R
- L59-020-R
- L59-021-R
- L59-022-R
- L59-071-R
- L59-074-R
- L63-033-R
- L63-035-R
- L63-037-R
- PAJ-3+1-R
- PAJ-4+1-R
- TOY-029-R
- TOY-034-R
- TOY-035-R
- TOY-036-R
- TOY-037-F
- TOY-041-R
- TOY-055-F
- TOY-056-R
- TOY-067-F
- TOY-068-R
- TOY-078-R
- TOY-082-R
- TOY-083-R
- TOY-084-R
- TOY-085-R
- TOY-088-R
- TOY-101-F
- TRIT-003-R
- TRIT-3+2-R
- Y60-5+2-R
- Y60-6+2-R
- Y60-7+2-R
- Y60-7L-F
- Y60-8L-F
(6 reviews) -
45 Series Land Cruiser - FJ45, HJ45 (pre 8/1980)
Dobinsons PB59-1014K Polyurethane Leaf Spring Bush Kit for FJ45 HJ45 FJ55 30mm eyes
- Suits FJ45 and HJ45 Series Land Cruisers REAR ONLY and FJ55 Land Cruisers Front and Rear with 35mm spring eyes
- For any lift height, or no lift. These are OE replacement bushings.
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of leaf springs in the front or rear
- 1 Kit suits 1 pair of leaf springs
(7 reviews) -
45 Series Land Cruiser - FJ45, HJ45 (pre 8/1980)Dobinsons SK59-015/16 Greasable Shackle Kit Pair for Toyota 45/55 Series
- Suits front or rear of FJ55 Land Cruisers, and the rear of FJ45 HJ45 pre 8/1980 Models
- Comes with 1 left and 1 right side (SK59-015 x 1 and SK59-016 x 1)
- Suits leaf springs with 30mm spring eyes
- Recessed twin hole greasable design
- Reduces friction in bushes, creating a more comfortable ride
- Heavy duty design and provide simple service through external grease nipples
- Sold as a pair to replace the original shackles
- Incredibly tough and durable gold zinc plating
- Photo for illustration purposes only
(6 reviews) -
45 Series Land Cruiser - FJ45, HJ45 (pre 8/1980)Dobinsons SP59-022 Greasable Pin Kit (Pair) Land Cruiser FJ45 HJ45 Rear pre 8/1980
- Dobinsons SP59-022 Greasable Pin Kit – Toyota Land Cruiser 45 Series rear end with 30mm spring eyes.
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Purchase includes 1 pair (2 pieces) of greasable pins for the fixed end of a leaf spring
- Photo for reference only, actual color or finish may appear different
(8 reviews) -
45 Series Land Cruiser - FJ45, HJ45 (pre 8/1980)Dobinsons 1.5″ Lift Suspension Kit | Toyota Land Cruiser FJ45 HJ45 Pre-8/1980
- 40mm Lift Kit – Land Cruiser 45 series 1960 to 1979 models with 25mm eye front and 30mm eye rear leaf springs
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
(13 reviews) -
45 Series Land Cruiser - FJ45, HJ45 (pre 8/1980)Dobinsons Rear Medium Load Leaf Springs Pair for FJ45 HJ45 pre 8/1980 (30mm eyes)
- Rear Leaf Springs for the Toyota FJ45 HJ45 4×4 up to 8/1980 models and they give 40mm (1.6″) of lift with stock weight.
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, includes 1 left and 1 right spring (different heights to correct lean)
- You can use the heavier version and remove the #3 leaf from both sides to make them the same as these medium load springs
(6 reviews) -
40 Series Land Cruiser Early (1960-1979)
Dobinsons HJ45-7L-F Front Leaf Springs Pair for FJ/BJ40 FJ/BJ45 up to 1979
- Front Leaf Springs for the Toyota FJ/BJ40 and FJ/BJ45 up to 1979 with 25mm eyes
- 45mm front lift with 400LBS constant weight on an FJ40/BJ40
- 45mm front lift with stock front end weight on an FJ45/BJ45
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, leaf springs only
(5 reviews) -
SuspensionOMESD23 Steering Damper | Land Cruiser 40 45 46 47 55 series
- Suits Toyota Landcruiser 40 45 46 47 and 55 series (all years and variants of these models)
- Nine Stage Coil Spring Valving For Optimum Performance
- A 15mm Piston Rod Provides Improved Strength
- Stone Guard Protects Piston Rod Against Stone Damage
- A 35mm Piston And Bore Allows Increased Oil Volume
- Twin Tube Design Protects Internal Components Against Stone Damage
- Multi-Lip Seal Prevents Oil Loss
- Original Stabilizer Mounts May Be Used Where Appropriate
- Photo for illustration purposes
(15 reviews) -
Sale!
Roof RacksTHIS SHIPS FREE
within 48 US StatesWinter Sale on Now!!!
10% off and FREE SHIPPING
Within US 48 StatesRCI Low Profile Pro Truck Bed Bars – 3.5″ Tall
- Super low profile (low pro) bed rack set to mount all sort of gear or a Roof Top Tent
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier, Ford Ranger, Chevy Colorado, GMC Canyon, Ford F150, Toyota Tundra, etc
- Utilizing 2 crossmembers spanning the truck bed, these bed bars have a high weight capacity and provide even weight distribution on the trucks bed side rails
- Bolts to inside of bed rails or can alternatively be mounted with optional “drill-free” clamps to mount like a truck topper (Not applicable when bolting to accessory rail systems)
- Bars are 3.5″ tall from bed rail to top of bars
- Adjustable width adapts to any truck bed from 54″- 69″ width between the bed rails
- Can be positioned up to 58″ apart (front to back)
- Using these bars will minimize the aerodynamic drag normally associated with roof top tents by keeping it below the roof-line
- Slotted mounting points on top of rack accept nearly any roof top tent making mounting a breeze
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer. This extra step is expensive and time consuming but ensures our paint job will outlast anything else in the industry!
- Easy bolt together assembly, takes about 15 minutes to install with only a few basic hand tools
- All hardware for installation is included
- INSTALL GUIDE
- Made in Loveland, Colorado USA
(5 reviews) -
45 Series Land Cruiser - FJ45, HJ45 (pre 8/1980)
Dobinsons HJ45-8L-F Front Leaf Springs Pair for FJ/BJ45 up to 1979
- Front Leaf Springs for the Toyota FJ/BJ45 up to 1979 with 25mm eyes
- 45mm front lift with 110-180LBS front end weight on an FJ45/BJ45
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, leaf springs only
(2 reviews) -
45 Series Land Cruiser - FJ45, HJ45 (pre 8/1980)
Dobinsons Rear Heavy Load Leaf Springs Pair for FJ45 HJ45 pre 8/1980 (30mm eyes)
- Rear Leaf Springs for the Toyota FJ45 HJ45 4×4 up to 8/1980 models and they give 40mm (1.6″) of lift with 440LBS of constant rear weight.
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, includes 1 left and 1 right spring (different heights to correct lean)
(2 reviews) -
Differential | DrivetrainTHIS SHIPS FREE
within 48 US StatesARB RD153 Rear Air Locker Toyota 12 Bolt Semi Float
- For Use With Toyota 12 Bolt Semi Float 30 Spline solid axle – used for many years in some rear applications
- 1.969″ (50mm) ID Carrier bearings must be used.
- Full vehicle fitment list is further down in the main description, includes Landcruiser 40, 42, 45, 47, 55, 60, 62, 70, 73, 74, 75 Series and 1990-1992 80 Series with semi-float rear end – be sure to check the list below before ordering!!
- At the flick of a dash-mounted switch, compressed air is delivered to the seal housing assembly via a nylon air line.
- Instantaneously go from an open differential to a fully locked differential at the flick of a switch for maximum traction
- Requires an Air Compressor for operation, Sold Separately
- Why do they use air? Air is used on every semi truck on the road to reliably operate their brakes through solenoids, and ARB uses the same technology. When installed correctly, it’s ultra-reliable!!
- The ARB Air Locker is a pneumatic locking differential that uses air to facilitate the locking of both axles. This action converts your differential from a conventional open to a full spool type axle supplying 100% power to both wheels to keep you going through the worst terrain.
- This Air Locker kit includes the full differential, instruction booklet, airline, fittings, switch and cover, and necessary seals. When combined with an Air Compressor and the original differential, you’ll have everything you need as far as parts go.
- Full specification sheet, including all included parts, CLICK HERE
- It’s recommended that a qualified differential mechanic do the installation for proper setup
- Covered by a full manufacturer’s 5 YEAR WARRANTY
(12 reviews)
