Toyota

Showing 931–960 of 1158 resultsSorted by popularity

Leaf Springs - Tacoma 1st Gen
OMESB121 Tacoma Leaf Spring Bushing Kit | 1998-2004 Tacoma
- Suits 1998-2004 Toyota Tacoma 4×4 and Prerunner
- 1 kit fits both ends of ONE leaf spring (the fixed end and the shackle end top and bottom)
- Each kit comes with as pictured
- Order 2 kits to replace the bushings in 2 leaf springs
- Polyurethane bushings with steel sleeves
- Color: Yellow
- Material: Polyurethane
- Includes Shackle Bushing: Yes
- Includes Spring Pad Bushings: Yes
- Includes Sleeve: Yes
- Includes Hardware: No
- Estimated Install Time (Hours): 2
Rated 4.89 out of 5
(9 reviews)
$29.95 Add to cart
Leaf Springs - Tacoma 1st Gen
OME EL122RB 2.25″ Leaf Spring for Toyota Tacoma 1998-2004
- Suits Toyota Tacoma 1st Gen 1998-2004 (will not fit the 1996 or 1997 models)
- Lifts 2.25″ over stock height
- This is the EL122RB – which is the sjhorter side and usually mounts onto the passenger side
- Draw-tapered and diamond cut leaves
- Bolted leaf clamps allow installation of anti-squeak nylon liners
- Fully scragged to reduce the risk of sagging
- Load tested to ensure the spring meets the required specification
- Military wrap design provides added safety
- Re-greasable nylon interleaf anti-friction pads reduce friction at the leaf tips
- Flat axle seat area allows a positive, safe axle mount and reduces spring stress
- Shot peened to reduce spring stress and increase spring life
- Two-stage leaf pack featured on most rear springs for optimum comfort
- Color: Black
- Weight: 26.2 kg
- Material: Steel
- Spring Rate: 120 / 283 lbf/in
- Eye Diameter: 40 mm (F) / 40 mm (R)
- Number Of Leaves: 5+2
- Primary Free Camber: 189 mm
- Warranty: 3 YR
- The other side leaf spring as well as Bushings and U-Bolts are sold separately
Rated 4.91 out of 5
(11 reviews)
$243.95 Add to cart
Leaf Springs - Tacoma 1st Gen
OME EL122RA 2.25″ Leaf Spring for Toyota Tacoma 1998-2004
- Suits Toyota Tacoma 1st Gen 1998-2004 (will not fit the 1996 or 1997 models)
- Lifts 2.25″ over stock height
- This is the EL122RA – which is the taller side and usually mounts onto the driver’s side
- Draw-tapered and diamond cut leaves
- Bolted leaf clamps allow installation of anti-squeak nylon liners
- Fully scragged to reduce the risk of sagging
- Load tested to ensure the spring meets the required specification
- Military wrap design provides added safety
- Re-greasable nylon interleaf anti-friction pads reduce friction at the leaf tips
- Flat axle seat area allows a positive, safe axle mount and reduces spring stress
- Shot peened to reduce spring stress and increase spring life
- Two-stage leaf pack featured on most rear springs for optimum comfort
- Color: Black
- Weight: 26.2 kg
- Material: Steel
- Spring Rate: 120 / 283 lbf/in
- Eye Diameter: 40 mm (F) / 40 mm (R)
- Number Of Leaves: 5+2
- Primary Free Camber: 204 mm
- Warranty: 3 YR
- The other side leaf spring as well as Bushings and U-Bolts are sold separately
Rated 5.00 out of 5
(5 reviews)
$243.95 Add to cart
Suspension
OMESD23 Steering Damper | Land Cruiser 40 45 46 47 55 series
- Suits Toyota Landcruiser 40 45 46 47 and 55 series (all years and variants of these models)
- Nine Stage Coil Spring Valving For Optimum Performance
- A 15mm Piston Rod Provides Improved Strength
- Stone Guard Protects Piston Rod Against Stone Damage
- A 35mm Piston And Bore Allows Increased Oil Volume
- Twin Tube Design Protects Internal Components Against Stone Damage
- Multi-Lip Seal Prevents Oil Loss
- Original Stabilizer Mounts May Be Used Where Appropriate
- Photo for illustration purposes
Rated 4.87 out of 5
(15 reviews)
$101.00 Add to cart
Suspension
OME Steering Damper – Toyota 4Runner Pickup (1985-1995)
- Suits 1985 to 1995 Toyota 4Runner with IFS torsion bar front end and 1985 to 2004 Toyota Hilux and Pickup with IFS torsion bar front end
- Nine Stage Coil Spring Valving For Optimum Performance
- A 15mm Piston Rod Provides Improved Strength
- Stone Guard Protects Piston Rod Against Stone Damage
- A 35mm Piston And Bore Allows Increased Oil Volume
- Twin Tube Design Protects Internal Components Against Stone Damage
- Multi-Lip Seal Prevents Oil Loss
- Original Stabilizer Mounts May Be Used Where Appropriate
- Photo for illustration purposes
Rated 4.90 out of 5
(10 reviews)
$101.00 Add to cart
45 Series Land Cruiser - FJ45, HJ47, BJ45, BJ46 (post 8/1980)
Dobinsons Full Suspension Kit for Land Cruiser FJ45 HJ47 BJ45 BJ46 1980-1984
- For 1980-1984+ Model Toyota Land Cruiser FJ45 HJ47 BJ45 BJ46 with 35mm spring eye size front and rear
- Lifts 40mm (1.6″) Front and Rear
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- Make your selections below for how complete of a kit you would like to make
- No parts are included if you don’t select them
Rated 5.00 out of 5
(5 reviews)
From $1,560.00 Select options
45 Series Land Cruiser - FJ45, HJ47, BJ45, BJ46 (post 8/1980)
Dobinsons HJ47-8L-F Front Leaf Springs Pair for 1980+ FJ45 HJ47 BJ45 BJ46
- Suits 1980+ Toyota Land Cruiser FJ45 HJ47 BJ45 BJ46 models with 35mm eyes
- Gives 40mm lift with up to 90LBS constant weight on a FJ45 HJ47 BJ45 BJ46
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair – bushings, u-bolts and all other parts sold separately
- Photo for illustration purposes only
Rated 5.00 out of 5
(4 reviews)
$470.00 Add to cart
45 Series Land Cruiser - FJ45, HJ47, BJ45, BJ46 (post 8/1980)
Dobinsons Heavy Load Rear Leaf Springs Pair for 1980+ Land Cruiser 45 46 47 Series
- Suits 1980-1984 Toyota Land Cruiser FJ45, HJ47, BJ45, BJ46 with 35mm spring eyes
- Gives 40mm of lift with up to 440LBS+ constant rear end constant weight added
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair (1 left and 1 right side) – bushings, u-bolts and all other parts sold separately
- Photo for illustration purposes only
Rated 5.00 out of 5
(5 reviews)
$860.00 Add to cart
45 Series Land Cruiser - FJ45, HJ47, BJ45, BJ46 (post 8/1980)
Dobinsons Medium Load Rear Leaf Springs Pair for 1980+ Land Cruiser 45 46 47 Series
- Suits 1980-1984 Toyota Land Cruiser FJ45, HJ47, BJ45, BJ46 with 35mm spring eyes
- Gives 40mm of lift with up to 220LBS+ constant rear end weight
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair (1 left and 1 right side) – bushings, u-bolts and all other parts sold separately
- Photo for illustration purposes only
Rated 5.00 out of 5
(5 reviews)
$760.00 Add to cart
Struts + Shocks - Tundra 2022+
FREE SHIPPING
within 48 US States
Dobinsons IMS Shock Kit for Tundra 2022-2025
- Dobinsons IMS Monotube Strut and Shock Absorber Kit – Front and Rear
- Suits 2022-2025+ Toyota Tundra
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Height Adjustable: Yes, fronts
- Suits 0-3″ front lift and 1-3″ rear lift
- Reservoir: Internal
- Finish: Corrosion resistant (EDP Surface Protection)
- Body Design: 66mm (2.6″) OD
- Rod: Double Chrome 22mm front, 18mm rear
- Piston: Race inspired hi-flow CNC 6061 Billet alloy
- Oil: High Quality Fuch’s Oil from Germany
- Seals: Heavy Duty 3 Stage FKM HNBR Sealing System
- Rings: Teflon Piston Rings
- Bushings: Natural Rubber
- Internal Design: IFP (Internal Floating Piston) Monotube
- Boot Included: Yes
- Bushings Included: Yes, top and bottom, front and rear
- IMS59-60446 specs – 540mm extended, 390mm compressed
- IMS59-60887 and IMS59-60687 specs – 680mm extended, 421mm compressed
- Reuse original coil springs or buy new Dobinsons springs
- Not suitable with TRD Pro coil springs
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
Rated 5.00 out of 5
(13 reviews)
From $1,230.00 Select options
Shocks + Struts - 5th Gen 4Runner
FREE SHIPPING
within 48 US States
Dobinsons IMS Shock Kit for 5th Gen Toyota 4Runner
- Dobinsons IMS Monotube Strut and Shock Absorber Kit – Front and Rear
- Suits 2010-2024 Toyota 4Runner 5th Gen
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Height Adjustable: Yes, fronts
- Reservoir: Internal
- Finish: Corrosion resistant (EDP Surface Protection)
- Body Design: 56mm OD
- Rod: Double Chrome 18mm
- Piston: Race inspired hi-flow CNC 6061 Billet alloy
- Oil: High Quality Fuch’s Oil from Germany
- Seals: Heavy Duty 3 Stage FKM HNBR Sealing System
- Rings: Teflon Piston Rings
- Bushings: Natural Rubber
- Internal Design: IFP (Internal Floating Piston) Monotube
- Boot Included: Yes
- Bushings Included: Yes, top and bottom, front and rear
- IMS59-50700 specs – 560mm extended, 420mm compressed
- IMS59-50701 specs – 598mm extended, 389mm compressed
- Reuse original coil springs or buy new Dobinsons springs
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(13 reviews)
From $1,230.00 Select options
Struts + Shocks - FJ Cruiser Late
FREE SHIPPING
within 48 US States
Dobinsons IMS Shock Kit for FJ Cruiser 2010+
- Dobinsons IMS Monotube Strut and Shock Absorber Kit – Front and Rear
- Suits 2010-2016 Toyota FJ Cruiser
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Height Adjustable: Yes, fronts
- Reservoir: Internal
- Finish: Corrosion resistant (EDP Surface Protection)
- Body Design: 56mm OD
- Rod: Double Chrome 18mm
- Piston: Race inspired hi-flow CNC 6061 Billet alloy
- Oil: High Quality Fuch’s Oil from Germany
- Seals: Heavy Duty 3 Stage FKM HNBR Sealing System
- Rings: Teflon Piston Rings
- Bushings: Natural Rubber
- Internal Design: IFP (Internal Floating Piston) Monotube
- Boot Included: Yes
- Bushings Included: Yes, top and bottom, front and rear
- IMS59-50700 specs – 560mm extended, 420mm compressed
- IMS59-50701 specs – 598mm extended, 389mm compressed
- Reuse original coil springs or buy new Dobinsons springs
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(13 reviews)
From $1,230.00 Select options
Shocks + Struts - 4th Gen 4Runner
FREE SHIPPING
within 48 US States
Dobinsons IMS Shock Kit for 4th Gen 4Runner 2003-2009
- Dobinsons IMS Monotube Strut and Shock Absorber Kit – Front and Rear
- Suits 2003-2009 Toyota 4Runner
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Height Adjustable: Yes, fronts
- Reservoir: Internal
- Finish: Corrosion resistant (EDP Surface Protection)
- Body Design: 56mm OD
- Rod: Double Chrome 18mm
- Piston: Race inspired hi-flow CNC 6061 Billet alloy
- Oil: High Quality Fuch’s Oil from Germany
- Seals: Heavy Duty 3 Stage FKM HNBR Sealing System
- Rings: Teflon Piston Rings
- Bushings: Natural Rubber
- Internal Design: IFP (Internal Floating Piston) Monotube
- Boot Included: Yes
- Bushings Included: Yes, top and bottom, front and rear
- IMS59-50220 specs – 567mm extended, 417mm compressed
- IMS59-50701 specs – 598mm extended, 389mm compressed
- Reuse original coil springs or buy new Dobinsons springs
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(13 reviews)
From $1,230.00 Select options
Struts + Shocks - FJ Cruiser Early
FREE SHIPPING
within 48 US States
Dobinsons IMS Shock Kit for FJ Cruiser 2006-2009
- Dobinsons IMS Monotube Strut and Shock Absorber Kit – Front and Rear
- Suits 2006-2009 Toyota FJ Cruiser
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Height Adjustable: Yes, fronts
- Reservoir: Internal
- Finish: Corrosion resistant (EDP Surface Protection)
- Body Design: 56mm OD
- Rod: Double Chrome 18mm
- Piston: Race inspired hi-flow CNC 6061 Billet alloy
- Oil: High Quality Fuch’s Oil from Germany
- Seals: Heavy Duty 3 Stage FKM HNBR Sealing System
- Rings: Teflon Piston Rings
- Bushings: Natural Rubber
- Internal Design: IFP (Internal Floating Piston) Monotube
- Boot Included: Yes
- Bushings Included: Yes, top and bottom, front and rear
- IMS59-50220 specs – 567mm extended, 417mm compressed
- IMS59-50701 specs – 598mm extended, 389mm compressed
- Reuse original coil springs or buy new Dobinsons springs
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(13 reviews)
From $1,230.00 Select options
Shocks + Struts - Tacoma 3rd Gen
FREE SHIPPING
within 48 US States
Dobinsons IMS Shock Kit for Tacoma 2005-2023
- Dobinsons IMS Monotube Strut and Shock Absorber Kit – Front and Rear
- Suits 2005-2023 Toyota Tacoma’s
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Height Adjustable: Yes, fronts
- Reservoir: Internal
- Finish: Corrosion resistant (EDP Surface Protection)
- Body Design: 56mm OD
- Rod: Double Chrome 18mm
- Piston: Race inspired hi-flow CNC 6061 Billet alloy
- Oil: High Quality Fuch’s Oil from Germany
- Seals: Heavy Duty 3 Stage FKM HNBR Sealing System
- Rings: Teflon Piston Rings
- Bushings: Natural Rubber
- Internal Design: IFP (Internal Floating Piston) Monotube
- Boot Included: Yes
- Bushings Included: Yes, top and bottom, front and rear
- IMS59-50220 specs – 22.3″ extended, 16.4″ compressed
- IMS59-50940 specs – 24.2″ extended, 14.2″ compressed
- Reuse original coil springs or buy new Dobinsons springs
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(13 reviews)
From $1,230.00 Select options
Shocks + Struts - 3rd Gen 4Runner
FREE SHIPPING
within 48 US States
Dobinsons IMS Shock Kit for 3rd Gen 4Runners + Prado 90
- Dobinsons IMS Monotube Strut and Shock Absorber Kit – Front and Rear
- Suits 1996-2002 Toyota 4Runner
- Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Suitable for 0-2.5″ of lift
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Height Adjustable: Yes, fronts
- Reservoir: Internal
- Finish: Corrosion resistant (EDP Surface Protection)
- Body Design: 56mm OD
- Rod: Double Chrome 18mm
- Piston: Race inspired hi-flow CNC 6061 Billet alloy
- Oil: High Quality Fuch’s Oil from Germany
- Seals: Heavy Duty 3 Stage FKM HNBR Sealing System
- Rings: Teflon Piston Rings
- Bushings: Natural Rubber
- Internal Design: IFP (Internal Floating Piston) Monotube
- Boot Included: Yes
- Bushings Included: Yes, top and bottom, front and rear
- IMS59-50222 specs – 473mm extended, 335mm compressed lengths
- IMS59-50225 specs – 530mm extended, 344mm compressed lengths
- Reuse original coil springs or buy new Dobinsons springs
- Note: Anyone lifting over 2″ shock install the included droop spacer, as pictured, and run a diff drop kit and UCA’s
Rated 5.00 out of 5
(13 reviews)
From $1,230.00 Select options
Full Suspension Kits - Tacoma 4th Gen
FREE SHIPPING
within 48 US States
Icon 2024 Toyota Tacoma Suspension Kit 1.25-3″ Lift – Stage 1
- Suits 2024+ Toyota Tacoma 4×4
- Vehicle specific tuned front and rear shocks for superior shock damping and control
- Increased wheel travel and improved ride quality over stock
- Front differential drop provides better maximum operating angle for CV joints and maximizes available wheel travel on 4WD models
- Adjustable coilovers provide 1.25-3″ front lift height over stock
- Included rear shocks are compatible with 0-1″ of rear lift over stock
- 6061 aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock bodies with 7/8″ shafts
- ICON engineered coil springs
- FK Rod End bearings for extended longevity and minimal deflection
- 2.0 Aluminum Series internal reservoir rear shocks with 5/8″ shafts
- This kit is configured for fitment on 4WD models. If installing onto a 2WD 2024 Toyota Tacoma SR, SR5, or TRD Sport, front differential drop kit part number 55160 is not needed and the other suspension system components can be ordered individually with full system functionality
- Will not fit 2024 Toyota Tacoma TRD PreRunner or 2024 Toyota Tacoma Limited AWD
(0 reviews)
From $2,089.80 Select options
Sale!
Overland Vehicle Systems (OVS)
FREE SHIPPING
within 48 US States
LD TACT Truck Bed Tent – Full Size Truck 5.5FT Bed
- For Full Size Truck Beds measuring 5.5-5.8 FT in length
- For Vehicles such as Chevy Silverado, Dodge Ram, Ford F150 F250 F350, GMC Sierra, Nissan Titan, Toyota Tundra
- 2-3 Person Design with Spacious Interior and Headroom
- Perimeter Skirt and Reinforced Floor Keeps Truck Bed Dry
- Color Coated Poles for Quick Deployment
- Large Windows with Mesh Allows for Ventilation
- Premium 420D Material with Removable Rainfly
- Padded Elastic Anchor Points for Easy Scratch-Free Fit
- Compact Carrying Bag is Included
- Internal Storage Options
- Setup Instructions
- This truck bed tent style is made in 2 sizes, 5FT for Mid-Size and 5.5FT for Full Size
Rated 5.00 out of 5
(3 reviews)
Original price was: $129.99.Current price is: $116.99. Add to cart
Sale!
Overland Vehicle Systems (OVS)
FREE SHIPPING
within 48 US States
LD TACT Truck Bed Tent – Mid-Size Truck 5.0FT Bed
- For Mid-Size Truck Beds measuring 5.0-5.2 FT in length
- For Vehicles such as Chevy Colorado, Ford Ranger, GMC Canyon, Nissan Frontier, Toyota Tacoma
- 2-3 Person Design with Spacious Interior and Headroom
- Perimeter Skirt and Reinforced Floor Keeps Truck Bed Dry
- Color Coated Poles for Quick Deployment
- Large Windows with Mesh Allows for Ventilation
- Premium 420D Material with Removable Rainfly
- Padded Elastic Anchor Points for Easy Scratch-Free Fit
- Compact Carrying Bag is Included
- Internal Storage Options
- Setup Instructions
- This truck bed tent style is made in 3 sizes, 5FT, 5.5FT and 6.0FT Truck Beds
Rated 5.00 out of 5
(3 reviews)
Original price was: $129.99.Current price is: $116.99. Add to cart
Dobinsons
FREE SHIPPING
within 48 US States
Dobinsons WA59-512K 2.5° Front Poly Caster Bushing Kit | Land Cruiser LJ70 LJ73 RJ70 RJ73
- For 11/84 to 12/89 Toyota 70 Series Bundera models, LJ70, LJ73, RJ70 and RJ73 with Round Headlights
  
  For 0″ to 2.5″ of lift, Recommended when replacing 20+ year old suspension parts
  
  Contains all 4 bushings for the front of the radius arm to axle
  
  Complete with steel inner sleeve
  
  This kit is a must for any lifted Landcruiser so that the steering control is correct giving you the best ride quality possible
  
  Photo for illustration purposes
Rated 5.00 out of 5
(9 reviews)
$360.00 Add to cart
Bundera LJ70/LJ73 - 84-89 - Round Headlights
Dobinsons C59-405 Rear Coils for Toyota Land Cruiser Bundera 70 Series 11/84-12/89
- For 11/84 to 12/89 Toyota 70 Series Bundera models, LJ70, LJ73, RJ70 and RJ73 with Round Headlights
- These lift 2.5″ with 220LBS of constant added weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
Rated 5.00 out of 5
(20 reviews)
$270.00 Add to cart
Bundera LJ70/LJ73 - 84-89 - Round Headlights
Dobinsons C59-404 Front Coils for Toyota Land Cruiser Bundera 70 Series 11/84-12/89
- For 11/84 to 12/89 Toyota 70 Series Bundera models, LJ70, LJ73, RJ70 and RJ73 with Round Headlights
- These lift 2.5″ with the added weight of a bumper and winch, of 110-220lbs added constant weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
Rated 5.00 out of 5
(15 reviews)
$270.00 Add to cart
Bundera LJ70/LJ73 - 84-89 - Round Headlights
Dobinsons C59-082 Front Coils for Toyota Land Cruiser Bundera 70 Series 11/84-12/89
- For 11/84 to 12/89 Toyota 70 Series Bundera models, LJ70, LJ73, RJ70 and RJ73 with Round Headlights
- These lift 1.75″ with the added weight of a bumper and winch, of 110-220lbs added constant weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
Rated 5.00 out of 5
(16 reviews)
$270.00 Add to cart
Icon
FREE SHIPPING
within 48 US States
Icon 2.5″ VS Coilovers Pair | 00-06 Tundra 01-07 Sequoia
- Suits 2000-2006 Toyota Tundra and 2001-2007 Toyota Sequoia 4WD
- Sold as a Pair
- Vehicle specific tuned for superior shock damping, vehicle control, and improved ride quality over stock
- Vehicle specific shock length and pairing with front differential drop yields maximum wheel travel
- Height-adjustable coilovers offer 0-3″ of lift height adjustment over stock
- 2.5″ diameter shock bodies with internal reservoirs for consistent performance
- ICON engineered coil springs
- 6061 Aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated shock bodies with 7/8″ diameter shafts
- FK rod end bearings for extended longevity and minimal deflection
- Fully rebuildable and re-tunable
- Aftermarket UCA’s should be run with any lift height of 2″ or more
- DOWNLOAD INSTALLATION GUIDE
Rated 5.00 out of 5
(6 reviews)
$1,459.95 Add to cart
Control Arms - Tundra 2022+
FREE SHIPPING
within 48 US States
Icon Billet Adjustable Toyota Track Bar | 22+ Tundra 23+ Sequoia 24+ Tacoma
- Suits 2022-2025+ Tundra and 2023-2025+ Sequoia and 2024-2025+ Tacoma 4×4 Models
- Vehicle specific design
- Helps to free up bind during rear suspension travel and articulation
- Heavy duty PTFE-lined FK Rod Ends offer minimal deflection and maximum articulation
- On-vehicle adjustable for precise track alignment
- CNC machined 6061 aluminum bar
- Satin anodized finish to match appearance of ICON rear upper and lower links
- Covered by ICON’s Limited Lifetime Warranty
- Installation Guide
- Warranty Info
Rated 5.00 out of 5
(10 reviews)
$419.95 Add to cart
Tacoma 4th Gen (2024-2025+)
FREE SHIPPING
within 48 US States
Icon Billet UCA DJ Pro Pair for 2024+ Tacoma + Land Cruiser 250 + GX550
- Suits 2024+ Toyota Toyota Tacoma and Land Cruiser 250 and Lexus GX550
- CNC machined 6061 billet aluminum construction with satin anodized finish
- Corrects suspension geometry and allows for proper wheel alignment on Tacomas or Land Cruisers with up to 3” of lift
- Quick, precise, on-vehicle adjustment for both caster and camber
- Delta Joint PRO allows maximum articulation without binding
- Delta Joint PRO is 100% serviceable and rebuildable
- FK Rod Ends at chassis pivots for strength and precision driving characteristics
- Built in O-ring sealed dust cover cap
- Installation Manual
- Warranty Info
(0 reviews)
$1,399.95 Add to cart
Upper Control Arms
FREE SHIPPING
within 48 US States
Icon Tubular UCA DJ Pro Pair for 2024+ Tacoma + Land Cruiser 250 GX550
- Suits 2024+ Toyota Toyota Tacoma and Land Cruiser 250 and Lexus GX550
- Features patented ICON Delta Joint (U.S. Pat. 10,731,700)
- Built in added caster for better handling on lifted vehicles
- Delta Joint PRO allows maximum articulation without binding
- Delta Joint PRO is 100% serviceable and rebuildable
- Serviceable dual stage polyurethane pivot bushings
- CNC machined housings for bushings and Delta Joint PRO
- 1026 DOM tube construction with black powder coat finish
- Includes billet dust caps for Delta Joint PRO
- Warranty Info
(0 reviews)
$849.95 Add to cart
RCV Axles
FREE SHIPPING
within 48 US States
RCV Ultimate IFS CV Axle Set | Tundra 2007-2021 & Sequoia 2008-2022
- Suits Toyota Tundra 2007-2021 and Toyota Sequoia 2008-2022
- The front end of a Tundra and Sequoia share the same driveline through the full generation
- Replaces the OEM Toyota part number 43430-0C040, which shows to fit all years in that generation of both models
- Standard length for use on lifted and non-lifted applications
- RCV Ultimate IFS CV Axles for Independent Front Suspension are designed to overcome the limitations of Toyota Tundra and Sequoia IFS axle shafts
- Ultimate IFS CV Axles provide increased strength that original equipment axle shafts just can’t match
- Even if you have big tires and big power there are no worries
- Ultimate IFS CV Axles are low maintenance, and are backed with a “No Questions Asked” limited lifetime warranty against breakage
- Warranty Form
- Our IFS CV axles meet and exceed the strength of a straight axle swap, while allowing you to maintain the traction, smoothness and control of your IFS
- The axles feature a double-offset inboard CV joint that is comprised by 1.0″ balls and 300M internal components
- The outboard CVs utilize our Dana 60 architecture with combination of 4340 & 300M components optimized for maximum strength
- The center bar is 35 spline 300M
- The RCV developed moly SPEC grease is used in the CVs to control heat build-up in even the most extreme use environments
- Black oxide coating is standard
- Sold as a pair
- Made in the USA
Rated 5.00 out of 5
(9 reviews)
$2,499.95 Add to cart
RCV Axles
FREE SHIPPING
within 48 US States
RCV Ultimate IFS CV Axle Set | Tacoma 96-04 & 4Runner 96-02
- Suits Toyota 4Runner 1996-2002, Toyota Tacoma 1995.5-2004, Toyota Hilux Surf 1996-2002, Toyota Prado 90 Series 1996-2002
- Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Does NOT fit manual locking hub versions
- Standard length for use on lifted and non-lifted applications
- RCV Ultimate IFS CV Axles for Independent Front Suspension are designed to overcome the limitations of Toyota Tacoma and 4Runner IFS axle shafts
- Ultimate IFS CV Axles provide increased strength that original equipment axle shafts just can’t match
- Even if you have big tires and big power there are no worries
- Ultimate IFS CV Axles are low maintenance, and are backed with a “No Questions Asked” limited lifetime warranty against breakage
- Warranty Form
- Our IFS CV axles meet and exceed the strength of a straight axle swap, while allowing you to maintain the traction, smoothness and control of your IFS
- The axles feature a double-offset inboard CV joint that is comprised by .8415″ balls and 300M internal components
- The outboard CVs utilize our Dana 60 architecture with combination of 4340 & 300M components optimized for maximum strength
- The center bar is 30 spline 4340
- The RCV developed moly SPEC grease is used in the CVs to control heat build-up in even the most extreme use environments
- Black oxide coating is standard
- Sold as a pair
- Made in the USA
Rated 5.00 out of 5
(9 reviews)
$2,299.95 Add to cart
RCV Axles
FREE SHIPPING
within 48 US States
RCV Ultimate IFS CV Axle Set | Tacoma 4Runner FJ Cruiser GX470 GX460
- Suits Toyota FJ Cruiser 2007-2014, 4Runner 2003-23, Tacoma 2005-2023, Lexus GX460 2010-2023 & Lexus GX470 2003-2009
- Standard length for use on lifted and non-lifted applications
- RCV Ultimate IFS CV Axles for Independent Front Suspension are designed to overcome the limitations of Toyota FJ Cruiser, 4 Runner, Tacoma, Lexus GX460 and Lexus GX470 IFS axle shafts
- Ultimate IFS CV Axles provide increased strength that original equipment axle shafts just can’t match
- Even if you have big tires and big power there are no worries
- Ultimate IFS CV Axles are low maintenance, and are backed with a “No Questions Asked” limited lifetime warranty against breakage
- Warranty Form
- Our IFS CV axles meet and exceed the strength of a straight axle swap, while allowing you to maintain the traction, smoothness and control of your IFS
- The axles feature a double-offset inboard CV joint that is comprised by 1-inch balls and 300M internal components
- The outboard CVs utilize our Dana 60 architecture with combination of 4340 & 300M components optimized for maximum strength
- The center bar is 35 spline 300M, the strongest in the industry
- The RCV developed moly SPEC grease is used in the CVs to control heat build-up in even the most extreme use environments
- Black oxide coating is standard
- Sold as a pair
- Made in the USA
Rated 5.00 out of 5
(9 reviews)
$2,299.95 Add to cart