Your cart is currently empty!
Toyota
Showing 901–930 of 961 results
-
200 Series Land Cruiser ARMOREDDobinsons C59-563 B6 650KG Armored Land Cruiser 200 Series Rear Coils
- C59-563 – Level B6 Armor with 650KG of additional weight over stock – 200 Series Land Cruiser
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish.
- Sold as a Pair – marked side specific for installation
$305.00 Add to cart -
Full Suspension Kits - Tundra 2nd GenShips FREE !!
within 48 US StatesDobinsons Tundra 2.0″-3.0″ MRA Quick Ride or AAL Kit for 2007-2021 4×4 V8
- Suits Toyota Tundra 2007-2021 Models with 5.7L V8 Gas Engine
- Base kit includes front assembled MRA coilovers and rear MRA shocks only. Choose your add-ons
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Coils are teal. Struts and shocks are black
- Front MRA Coilovers are assembled at the standard coil seat height, you set the lift height on the vehicle
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg, EDP Surface Protection
- Requires lower mount clearancing to fit the larger lower leg of the new coilover (see attached photo)
- See attached photo for correct hose routing
- CNC TIG Precision Welded Body End Mounts
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period, fully rebuildable shocks
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Front coilover assembly instructions
- New UCA’s are required for proper coilover and hose clearance, see all options
- Aftermarket wheels with +18 Offset or less REQUIRED to avoid reservoir + hose rubbing at full lock
- Choose from multiple rear lift height methods. These are not required if you don’t want to lift the rear
- Choose your desired suspension parts to build the kit best suited to your needs. If you don’t add it to the cart, it is not included
From $3,535.00 Select options -
Full Suspension Kits - Tundra 3rd Gen
2022+ Toyota Tundra Suspension Lift Options
- See all suspension options for your 2022-2024 Tundra in one page
- See the below drop boxes for all options along with pricing for each component
- As more parts become available for these new trucks, those parts will be added to this page
- Various brands are combined here to bring you as many lift solutions as possible
- Click on each drop-down item, or on the small square that appears to the right of the listed item to see that products full spec page and additional information
- Standard Coil seat height for Dobinson IMS and MRA Tundra struts should be set at 175mm (6.87″) from the strut bushing eye to top of coil isolator
From $884.95 Select options -
Tundra 3rd Gen (2022-2024)Ships FREE !!
within 48 US States2″ Front Strut Spacer Kit for Tundra 2022+ & Sequoia 2023+
- Suits 2022+ Toyota Tundra and 2023+ Toyota Sequoia
- Note: Not for use on Tundra or Sequoia equipped factory rear air, TRD PRO, or TRD Off-Road.
- ReadyLIFT leveling kits are the fastest, safest, most cost-effective way to bring the front of your vehicle level with the rear for that ideal lifted neutral stance.
- Our front strut assembly eliminates the hassle, time, and concern of compressing springs.
- A ReadyLIFT leveling kit will maintain a smooth OEM ride without adding stress to stock suspension components!
- The all-new part number 66-52200 2022-UP Toyota Tundra Leveling Kit is an excellent choice for those who want a level stance while running larger tires up to 34 inches.
- The no-trim maximum tire size for this kit is a 295-60R20 with a 20” X 9” wheel and +18 offset.
- Fabricated Steel Front Strut Spacers With Durable Black Powder Coat Finish
- Product Will Retain Ride Or Handling Quality
- Engineered And Built To Provide Years Of Trouble Free Service
- Made In USA
- Limited 1 Year Warranty
- Download Pdf Instructions
$229.95 Add to cart -
Sale!Full Suspension Kits - Tacoma 1st GenShips FREE !!
within 48 US StatesBilstein 47-310896 Front 6112 Series Kit | 1st Gen Tacoma
Original price was: $966.21.$826.00Current price is: $826.00. Add to cart -
Sale!BilsteinShips FREE !!
within 48 US StatesBilstein 47-310049 Front 6112 Series Kit | 1st Gen Sequoia + Tundra
Original price was: $966.21.$826.00Current price is: $826.00. Read more -
Sale!BilsteinShips FREE !!
within 48 US StatesBilstein 47-309975 Front 6112 Series Kit
Original price was: $966.21.$826.00Current price is: $826.00. Read more -
4Runner 2nd Gen (1990-1995)
Dobinsons C59-165 Rear 2″ Coils for Toyota 4Runner 2nd Gen Heavy Load
- Suits 2nd Gen Toyota 4Runner 1990-1995
- C59-165 – 2″ lift with 330LBS constant rear end load – linear rate coils
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- 2″ lift is 2″ over OE stock height. Keep this in mind, as these old trucks will be sagged below stock height
$270.00 Add to cart -
BrakesShips FREE !!
within 48 US StatesPowerbrake X-Line 4×4 3rd Gen 4Runner Big Brake Kit Stage 1 1996-2002
1996-2002 3rd Gen 4Runner Big Brake Kit Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 350mm x 34mm (13.77″ x 1.33″) 48-vane discs
- Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- REQUIRES 17″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
$2,675.00 Select options -
BrakesShips FREE !!
within 48 US StatesPowerbrake X-Line 4×4 FJ Cruiser Big Brake Kit Stage 1
Toyota FJ Cruiser Big Brake Kit (all years) Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 350mm x 34mm (13.77″ x 1.33″) 48-vane discs
- Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- Manufactured, finished and packaged 100% in South Africa
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- REQUIRES 17″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
- Check out the rear brake upgrade also for 06-09 Models and 10-16 Models
$2,675.00 Select options -
Sequoia 1st Gen (2001-2007)
Dobinsons Stock Height Sequoia Suspension Kit for 2001 to 2007 4.7L V8
- Complete suspension kit for replacing the original Sequoia wearable suspension parts
- Coils are specifically suited to bring the ride height back up to original stock height
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Additional parts can be added from the drop down menus
- New high performance IMS Monotube front and rear shock options are available to choose from
- If your vehicle has factory airbags in the rear, you’ll need to add the airbag conversion kit to run the new coil springs, option is below
From $1,200.00 Select options -
76 Series - FZJ76, HZJ76, VDJ76 - 2007+ (Station Wagon)
Dobinsons Toyota 76 Series Rear Bumper with Tire and Jerry Can Carrier
- Made for Long Wheel Base (LWB) 76 Series Land Cruiser Wagons, FZJ76, HZJ76, VDJ76
- Comes standard as Black Powder Coat
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
$2,860.00 Select options -
79 Series - FZJ79, HZJ79, HDJ79, VDJ79, GRJ79 (Pickup)
Dobinsons Toyota 79 Series Rear Bumper with Tire and Jerry Can Carrier
- Made for Long Wheel Base (LWB) 79 Series Land Cruiser Pickup Trucks, FZJ79, HZJ79, HDJ79, VDJ79,
GRJ79 - Comes standard as Black Powder Coat
- Stainless Steel Latch and Hardware
- Complete Kit with Everything Included
- All Lighting is 12V LED, requires splicing into original wiring harness (not plug and play)
- Works with Factory Tow Hitch in OE position
- Adjustable offset tire carrier head, suitable up to a 35″ tire
- Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected. We will be in touch with that delivery address
$2,860.00 Select options - Made for Long Wheel Base (LWB) 79 Series Land Cruiser Pickup Trucks, FZJ79, HZJ79, HDJ79, VDJ79,
-
Tacoma 3rd Gen (2016-2023)
Dobinsons Front Winch Bumper for Toyota Tacoma 2016-2023
- Suits Toyota Tacoma 4×4 from 2016-2023
- Winch compatible, up to 12,000 LB winches
- Driving Light Mounts
- Optional Fog Lights – Here for more details
- Optional Front Driving Lights (as shown in photos) – Here for more details
- Requires cutting of the original plastic front bumper cover
- Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates, 51mm top tubes
- Includes LED Turn Signals and all Required Hardware for Installation
- Separate Winch Cradle System, making installation faster. (does not include winch)
- Supplied Black, but can be painted by your paint shop
- Suits 10,000 and 12,000 LB Low Mount Winches – requires offset fairlead
- Installation Instructions
- Truck freight shipping is usually to the nearest freight terminal, or commercial address with forklift
- Ships to the nearest freight terminal on a pallet for you to pick up, unless you add home delivery. We will be in touch with that delivery address
From $2,075.00 Select options -
Rav4
Dobinsons C59-438 Front 1.2″ Coil Springs for Toyota Rav4 V6 2009 to 2011
- Suits Toyota Rav4 from 2009 to 2011, GSA33 V6 model – lifts 30mm (1.2″)
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Photo is not of actual coil spring pair
$270.00 Add to cart -
200 Series Land Cruiser (2008-2021)
Dobinsons Full Length Roof Rack for Land Cruiser 200 Series
- Suits Toyota Land Cruiser 200 Series and Lexus LX570 2008 to 2021
- Includes 200 Series specific mounting rails for installation
- Photo shows gutter mounts still attached to the rack, but they are not used on the 200 Series
- Will cover roof rack, but it will still open
- Black Powder Coat
- Full Steel Construction
- 4mm Thick, 50mm x 50mm Mesh Flooring
- 32mm Outer Rail & 25mm Upper Rail
- 330lb rating
- Roof Top Tent Design – flat rack except in the front
- Integrated Tie Down Points
- Roof Rack Tire carrier
- Includes vehicle-specific fitting kit to secure the rack to your roof
- Ships to the nearest freight terminal for you to pickup, or to commercial address with loading dock or forklift. Home delivery is optional, select that add-on down below
$1,465.00 Select options -
Full Suspension Kits - FJC LateShips FREE !!
within 48 US StatesDobinsons 2.5-3.5″ Extended Travel Pre-Assembled MRA FJ Cruiser Coilovers for 2010-2014
- Suits Toyota FJ Cruiser 2010-2014
- Looking for a quick and easy way to lift your FJ Cruiser? This is your answer
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons MRA are height adjustable by a fully threaded body
- MRA59-A574 – 575mm extended, 420mm compressed
- The Dobinsons MRA Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- Extended Travel – 567mm extended, 417mm compressed
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- Resi installation instructions
- To run these Extended Travel coilovers, new UCA’s need to be added for proper articulation and correct wheel alignment. A diff drop kit is also recommended to minimize CV binding at full droop
- Link to Matching rear shocks
$1,795.00 Select options -
FoxShips FREE !!
within 48 US StatesFOX 2.0 Performance Series Coilover IFP Shock – 983-02-051
- Application: Toyota 5th Gen 4Runner 2010-2024 (0-2), Toyota FJ Cruiser 2010-2016 (0-2″), Lexus GX460 (all years) – see full list down below
- Sold Individually – You will need to order 2 for one vehicle
- Preassembled with coil and strut mount – full assembly ready to bolt in
- Coilover comes preset to the taller lift height right out of the box
- Includes a 600LB spring rate coil
- Can not be used with any Dobinsons coils
- Body: 2.0” Impact extruded and CNC machined 6061-T6 clear anodized aluminum one-piece body resists rust over time
- Body Plating: Clear-anodized for a durable finish
- Reservoir: Internal IFP mono-tube reservoir design
- Components: Black-anodized, CNC-machined 6061-T6 billet aluminum
- Shaft: 5/8″ hard chrome plated heat-treated alloy steel
- Piston: Race-developed high-flow piston design
- Valving: Application specific valving to maximize performance
- Seals: Redundant sealing pack system main seal, wiper seal, scraper seal
- Bearing: Large diameter, heavy-duty spherical
- Adjustments: Ride height preload ring
- Extended: 21.775″
- Compressed: 16.600″
- Travel: 5.175″
- Top Mount: OEM
- Bottom Mount: Eyelet
- Installation Guide
- Link to order Fox Spanner Wrench to adjust 2.0 Coil Overs
- Exploded View Diagram
- Warranty Information
- Sold Individually – You will need to order 2 for one vehicle
$549.95 Add to cart -
FoxShips FREE !!
within 48 US StatesFOX 2.0 Performance Series Coilover IFP Shock – 985-02-002
- Application: Toyota Tacoma 2005-2023 (0-2″), Toyota FJ Cruiser 2006-2009 (0-2″), Toyota 4th Gen 4Runner 2003-2009 (0-2) – see full list down below
- Sold Individually – You will need to order 2 for one vehicle
- Preassembled with coil and strut mount – full assembly ready to bolt in
- Coilover comes preset to the taller lift height right out of the box
- Includes a 600LB spring rate coil
- Can not be used with any Dobinsons coils
- Body: 2.0” Impact extruded and CNC machined 6061-T6 clear anodized aluminum one-piece body resists rust over time
- Body Plating: Clear-anodized for a durable finish
- Reservoir: Internal IFP mono-tube reservoir design
- Components: Black-anodized, CNC-machined 6061-T6 billet aluminum
- Shaft: 5/8″ hard chrome plated heat-treated alloy steel
- Piston: Race-developed high-flow piston design
- Valving: Application specific valving to maximize performance
- Seals: Redundant sealing pack system main seal, wiper seal, scraper seal
- Bearing: Large diameter, heavy-duty spherical
- Adjustments: Ride height preload ring
- Extended: 21.190″
- Compressed: 16.600″
- Travel: 4.590″
- Top Mount: OEM
- Bottom Mount: Eyelet
- Installation Guide
- Link to order Fox Spanner Wrench to adjust 2.0 Coil Overs
- Exploded View Diagram
- Warranty Information
- Sold Individually – You will need to order 2 for one vehicle
$549.95 Add to cart -
60 62 Series Land Cruiser (1980-1989)
ARB 3410100 Toyota 60 Series Land Cruiser Front Winch Bumper
- Suits all Toyota Landcruiser 60 and 62 Series models from 1980 to 1989
- Enhances the look of the 60 Series or 62 Series as well as providing awesome protection against animal strikes or rear end accidents
- Full width single piece steel welded bumper, includes all mounting hardware
- Compatible with a range of low mount winches without an integrated solenoid pack
- Includes driving light mounts as well as CB antenna mounts, welded in place
- Durable black powder coat finish
- Includes recessed turn signals in the bumper that you can wire into your OEM harness for additional visibility
- Not as heavy as it looks, just over 100lbs out of the packaging
- Ships by truck freight – we will be in touch with you about shipping details
- Fitment of Warn XD9000 & M8000 winch requires special spacer kit – ARB part no. 3500050.
- Best suited to a 10k or 12k low-mount winch, due to overall truck weight and size
$1,157.00 Add to cart -
80 Series Land Cruiser (1990-1997)Ships FREE !!
within 48 US StatesDobinsons 6″ Lift MRA Kit Builder | Land Cruiser 80 Series
- Kit requires additional parts for this lift height, see below
- **Kit photo shows additional options purchased**
- Coils are specifically suited to match lift height and added weight
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Installation Instructions of the MRA Shocks
- A double-cardan front drive shaft is required for any lift of 4″ or more on this vehicle – we don’t sell them
- All options are listed below. For a complete kit, one item from each drop down menu should be selected for a complete kit
From $4,680.00 Select options -
Tundra 2nd Gen (2007-2021)Ships FREE !!
within 48 US States3/4″ Lift Shackles for Toyota Tundra 2007-2021
- Easily adds 3/4″ of lift to your 2007-2021 Toyota Tundra
- 3/8″ Thick ASTM A36 Steel
- Shackle plates are powder coated black
- Class 10.9 zinc-plated hardware
- Bolts on the same way the factory shackle comes off
- Made in the USA
$130.00 Add to cart -
AccessoriesShips FREE !!
within 48 US States4 Tire Inflation System – Toyota Tacoma Engine Bay Mount
- Suits 2016-2023 Toyota Tacoma Models
- Air It Up 4 Tire Inflation System can deflate, and automatically inflate or equalize 4 tires at the same time.
- Includes ADS Controller Box, 90 psi Pressure Regulator, 150 psi Blow-off Valve.
- ADS Controller features 2 inlet valves with permanent or portable air source.
- Includes Pre-cut Hoses, Push To Connect Fittings, and everything that is needed for easy installation.
- Includes 8 Quick Connect Chucks with the easy to use Betty Bar feature and 4 Green Tire Connect Whips with a Storage Bag
- Heavy Duty Construction with DOT approved hoses and fittings.
- Designed to work with the EGOI 2 Air Compressor, ARB and Viair Compressors
- Complete line of Air Compressor Bracket Kits Available for Under Engine, Under Seat, and Rear Cargo Area Mounting Solutions.
- 5-Year Limited Month Warranty
$299.99 Add to cart -
AccessoriesShips FREE !!
within 48 US StatesCompressor Mount & Connection Kit – Tacoma Engine Bay for ARB & UDA Dual Air Compressor – Black
- 16-22 Toyota Tacoma Engine Mount Install Bracket Kit.
- For ARB Dual Air Compressor
- Designed to fit into your engine bay
- Heavy Duty Mounting Bracket and hardware
- Powder Coated Black
- 23 inch Hi Temp/Hi Pressure Air Line Hose
- 2 x 90 degree 3/8 Inch Swivel Push-to-Connect Fitting
$149.99 Read more -
45 Series Land Cruiser - FJ45, HJ45 (pre 8/1980)
Dobinsons Rear Heavy Load Leaf Springs Pair for FJ45 HJ45 pre 8/1980 (30mm eyes)
- Rear Leaf Springs for the Toyota FJ45 HJ45 4×4 up to 8/1980 models and they give 40mm (1.6″) of lift with 440LBS of constant rear weight.
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, includes 1 left and 1 right spring (different heights to correct lean)
$860.00 Add to cart -
Pickup 1988-1995
Dobinsons HIL-035-R Heavy Load Leaf Springs Pair for Toyota Pickup 1988-95
- Dobinsons HIL-035-R pair of leaf springs for the rear of the Toyota Pickups (USA models) from 1988 to 1995 and they give 45mm (1.75″) of lift with a constant load of 440LBS or more
- This is a 4+2 pack (6 leaves)
- These are special order only, not stocked in the USA. Email us for an ETA, but it’s usually 4-6 months minimum to special order leaf springs from Australia
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, springs only
$480.00 Read more -
Full Suspension Kits - FJ70 BJ70 BJ71 FJ73 BJ73 FJ74 BJ74Ships FREE !!
within 48 US StatesDobinsons 2.0″ MRA Suspension Kit Toyota Land Cruiser FJ70 BJ70 BJ71 FJ73 BJ73 FJ74 BJ74
- Full 2″ MRA Suspension Kit Replacement for Toyota Land Cruiser FJ70 BJ70 BJ71 FJ73 BJ73 FJ74 BJ74
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Select medium or heavy load leaf spring options
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- External Remote Oil Reservoir with dual speed compression adjustment
- Single Piece Lower Leg, Natural Rubber Bushings Top and Bottom
- Triple Lip Oil Seal for Superior Lifespan
- Direct Bolt-on, Fully Rebuildable Design
- Pre-Charged with Nitrogen, Ready to be Assembled and Installed
- EDP Surface Protection, 3mm Heavy Duty Wall Thickness
- Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Ships by Fedex ground, multiple packages (4 loose leaf springs and a box with everything else)
From $4,035.00 Select options -
FJ/BJ70, BJ71, FJ/BJ73, FJ/BJ74
Dobinsons HJ61-8L-R Rear Super Heavy Load Leaf Springs Pair
- Rear Leaf Springs for the Toyota FJ/BJ70, BJ71, FJ/BJ73, FJ/BJ74 4×4 from 1985 to 1989 and 70 Series – HZJ70, HZJ73, PZJ70, PZJ73 1990-1999
- 50mm rear lift with SUPER HEAVY rear end weight of 660LBS+
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, includes 1 left and 1 right spring (different heights to correct lean)
$570.00 Add to cart - Rear Leaf Springs for the Toyota FJ/BJ70, BJ71, FJ/BJ73, FJ/BJ74 4×4 from 1985 to 1989 and 70 Series – HZJ70, HZJ73, PZJ70, PZJ73 1990-1999
-
Dobinsons
Dobinsons HJ61-7L-R Rear Heavy Load Leaf Springs Pair
- Rear Leaf Springs for the Toyota FJ/BJ70, BJ71, FJ/BJ73, FJ/BJ74 4×4 from 1985 to 1989
- 50mm rear lift with 330LBS of additional constant weight
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, includes 1 left and 1 right spring (different heights to correct lean)
$430.00 Add to cart -
ARB
OME 2899 Rear Coil Springs | 4Runner FJ Cruiser GX470 GX460
- OME Part Number 2899
- Bar Size : 19 mm
- Free Height : 400mm
- Number of Turns : 6.75
- Coil Weight (each): 6.9 Kg | 15.2 lbs
- Spring Rate : 387 lbs
- Sold in Pairs
$214.00 Add to cart
