Your cart is currently empty!
Tacoma
Showing 271–280 of 280 results
-
AccessoriesFREE SHIPPING
within 48 US States4 Tire Inflation System – Toyota Tacoma Engine Bay Mount
- Suits 2016-2023 Toyota Tacoma Models
- Air It Up 4 Tire Inflation System can deflate, and automatically inflate or equalize 4 tires at the same time.
- Includes ADS Controller Box, 90 psi Pressure Regulator, 150 psi Blow-off Valve.
- ADS Controller features 2 inlet valves with permanent or portable air source.
- Includes Pre-cut Hoses, Push To Connect Fittings, and everything that is needed for easy installation.
- Includes 8 Quick Connect Chucks with the easy to use Betty Bar feature and 4 Green Tire Connect Whips with a Storage Bag
- Heavy Duty Construction with DOT approved hoses and fittings.
- Designed to work with the EGOI 2 Air Compressor, ARB and Viair Compressors
- Complete line of Air Compressor Bracket Kits Available for Under Engine, Under Seat, and Rear Cargo Area Mounting Solutions.
- 5-Year Limited Month Warranty
(3 reviews) -
AccessoriesFREE SHIPPING
within 48 US StatesCompressor Mount & Connection Kit – Tacoma Engine Bay For Dual Air Compressor
- 16-22 Toyota Tacoma Engine Mount Install Bracket Kit.
- For ARB Dual Air Compressor
- Designed to fit into your engine bay
- Heavy Duty Mounting Bracket and hardware
- Powder Coated Black
- 23 inch Hi Temp/Hi Pressure Air Line Hose
- 2 x 90 degree 3/8 Inch Swivel Push-to-Connect Fitting
(3 reviews) -
ARB
OME 2888 Front Coil Springs | Toyota Lexus Trucks SUV’s – Pair
- OME Part Number 2888
- Bar Size : 17 mm
- Free Height : 405mm
- Number of Turns : 10.75
- Coil Weight (each): 4.7 Kg | 10.3 lbs
- Spring Rate : 590 lbs
- Sold in Pairs
(11 reviews) -
ARB
OME 2887 Front Coil Springs | Toyota Lexus Trucks SUV’s – Pair
- OME Part Number 2887
- Bar Size : 17 mm
- Free Height : 400mm
- Number of Turns : 10.75
- Coil Weight (each): 4.7 Kg | 10.3 lbs
- Spring Rate : 590 lbs
- Sold in Pairs
(7 reviews) -
Sale!Accessories
RCI Tacoma Aluminum Roof Rack | 2005-2023 Tacoma
- RCI 2nd and 3rd Gen Toyota Tacoma Aluminum Roof Rack – suits 2005-2023 DUAL CAB models
- Only suits the dual cab models, will not suit access cabs
- Mount anything from lights, Hi-lift jacks, roof top tents, shower systems, Maxtrax, quick-fist, roto-pax, spare tire, bike mounts, roof baskets, etc
- Heavy duty design will easily support roof top tents and heavy gear
- 1/4″ 5052 aluminum laser cut side panels and rear fairing, 1″x 2″ black anodized T-slot cross-bars, 1/8″ 5052 front fairing
- T-Slot comes machined to accept nut plates and carriage bolts to simplify installation of accessories without ever having to remove bars
- Front wind fairing matches the contour of the roof and windshield for a superior fit and finish and improved aerodynamics
- Includes rubber trim and all necessary hardware for installation
- Our rack is the only one on the market that utilizes injection molded / CNC cut rubber mounting blocks that lift and cushion the roof rack mounting feet AND completely seal out moisture without the need for silicone!
- Built in side panel slots allow unlimited options for adding accessories such as handles, side lighting, awning mounts, and more
- Entirely bolt on design utilizes existing roof rack mounting holes
- Rack is only 1.75″ above highest point of the truck (not including antenna)
- Does NOT require the removal or alteration of roof antenna
- Industry standard T-slot cross-bars are compatible with hundreds of accessories
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer for an exponentially more durable finish
- Includes black stainless steel hardware, and trim. We don’t charge extra for high quality hardware
- Easy bolt together assembly, takes about 45 minutes to install
- All hardware and installation instructions provided
- Weighs approximately 32lbs
- Installation Instructions
- Made in the USA
(8 reviews) -
SnorkelFREE SHIPPING
within 48 US StatesSafari Snorkel SS172HP – Toyota Tacoma 3rd Gen 2016-2023
- Suits Toyota Tacoma 2016-2023 Models – 3rd Gen Tacoma
- Raises air intake to prevent water ingestion, while also allowing vehicles to utilize clean air when driving in dusty conditions
- Vehicle specific design and factory airbox adaption fitment
- Manufactured using durable, UV stable cross linked polyethylene material
- Supplied as a comprehensive kit, including the necessary fasteners and mounting brackets
- Unique air ram design acts as a highly efficient water separator to remove rain water form incoming air stream
- Designed and manufactured in Australia
- 10% higher CFM for this application over other brand snorkels, due to large body design
- Requires cutting and drilling of the fender and A-pillar. Full instructions and template provided
(23 reviews) -
Tacoma 3rd Gen (2016-2023)FREE SHIPPING
within 48 US StatesDirt King Heim UCA Pair with Uniballs for Tacoma 2005-2023
- Suits 2005-2023 Toyota Tacoma 2WD / 4WD, 2005-2015 Toyota Hilux Vigo 2WD / 4WD
- CAD designedÂ
- Boxed plate construction
- Utilizes American made FK bearings
- 4130 chromoly uniball cups
- Brushed stainless steel logo plates
- Preassembled for fast installation
- Zinc plated components for corrosion resistance
- Professionally MIG welded
- Proudly made in the USA
(4 reviews) -
Tacoma 3rd Gen (2016-2023)FREE SHIPPING
within 48 US StatesDirt King Performance Tacoma Lower Control Arms Pair for 2016-2023
- Suits 2016-2023 3rd Gen Toyota Tacoma 2WD / 4WD
- CAD designed
- Formed steel bushing gussets
- Internally ribbed with extrusions for weight reduction
- Preassembled for fast installation
- Grease fitting ports for easy servicing
- Zinc plated components for corrosion resistance
- Bump stop plating
- Limit strap tabbing
- Bypass shock tabbing
- Professionally MIG welded
- Proudly made in the USA
(4 reviews) -
Tacoma 2nd Gen (2005-2015)FREE SHIPPING
within 48 US StatesDirt King Performance Tacoma Lower Control Arms Pair for 2005-2015
- Suits 2005-2015 2nd Gen Toyota Tacoma 2WD / 4WD
- CAD designed
- Formed steel bushing gussets
- Internally ribbed with extrusions for weight reduction
- Preassembled for fast installation
- Grease fitting ports for easy servicing
- Zinc plated components for corrosion resistance
- Bump stop plating
- Limit strap tabbing
- Bypass shock tabbing
- Professionally MIG welded
- Proudly made in the USA
(4 reviews) -
Sale!Tacoma 1st Gen (1996-2004)On Sale All November!!
Dobinsons Rear Shocks for Toyota Tacoma 1998 to 2004
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings
- Double Chrome hardened rods
- Metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Sold in Pairs
(9 reviews)
