Your cart is currently empty!
Leaf Springs - Tacoma 1st Gen
Showing all 9 resultsSorted by popularity
-
Tacoma 3rd Gen (2016-2023)Dobinsons UB59-453-2K Rear U-Bolts for Toyota Ford Nissan Trucks (2 Pairs)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 4 U-bolts, enough for 1 vehicle
- Requires 2″ lift leaf springs to ensure proper fitment
- Suits Toyota Tacoma 1998-2023 (all springs) and Nissan Frontier D40 and D41 2005-2022+ (heavy duty leaf springs), Ford Ranger 2019+
- Photos for illustration purposes. These are square at the top
- These U-bolts are 180mm in length. If you need longer, you can use the Tundra U-bolts which are 30mm longer (210mm overall), UB59-437K
(10 reviews) -
SuspensionDobinsons 2″ Rear Lift Blocks – Quick Ride Kit – Tacoma Tundra Hilux Frontier
- High Quality cast steel lift blocks/spacers, painted black
- Extended length u-bolts, zinc coated
- Fast and simple to install
- New extended length rear shocks are recommended
- Only to be used with OE height leaf springs
- Suits all Toyota Tacoma’s from 1998 to 2023 and Tundra’s from 2000 to 2021
- Suits all Toyota Hilux from 2005 to 2023
- Suits all Nissan Frontier D21, D22, D40, D41 from 1985 to 2022+
- Installation Instructions
(7 reviews) -
Sale!15% off Year End SaleAdd-a-Leaf
Wheeler’s 3 Leaf Progressive Add-A-Leaf Set – 1.5″ Lift | 95-23 Tacoma 99-06 Tundra
- Suits 1995-2004 and 2005-2023 Toyota Tacoma 4×4 and Pre-Runner, and 1999-2006 Toyota Tundra
- Includes 2 x Progressive add-a-leaf sets (3 leaves each), 2 longer center pins and replacement longer U-bolts
- Adds 1.5″ of lift approximately. Different bed/cab configurations could see variations in lift height
- Added constant load on the rear of the truck may reduce the total added lift height, but this will support additional weight better than the stock leaf pack
- Feature 60mm diamond cut ends and anti-friction pads for smooth, squeak free performance
- On some years and/or models, you may need to remove the front clamp from the Add-A-Leaf to avoid interference with the overload spring and gas tank strap
- Instructions
(6 reviews) -
Suspension
Dobinsons 30mm (1.2″) Rear Lift Blocks – Quick Ride Kit – Tacoma Tundra Hilux Frontier
- High Quality cast steel lift blocks/spacers, painted black
- Extended length u-bolts, zinc coated
- Fast and simple to install
- New extended length rear shocks are recommended
- Only designed to be used with OE height leaf springs
- Built-in correction for pinion angle
- Full vehicle range is listed down below
- Installation Instructions
(7 reviews) -
Add-a-Leaf
Icon 1.5″ AAL Add-A-Leaf Set | 1996-2023 Tacoma 2000-2006 Tundra
- Suits 1996-2004 and 2005-2023 Toyota Tacoma 4×4 and Pre-Runner, and 1999-2006 Toyota Tundra
- Provides 1.5” of lift on stock weight rear end
- Lowers rear spring rate for smoother ride quality
- Uses high-quality progressive rate, lifetime guaranteed leaf springs
- Includes U-bolts and required hardware
- Installation is easy, using common socket wrench, torque wrench, and cut-off wheel
- Installation Guide
(7 reviews) -
Sale!15% off Year End SaleAdd-a-Leaf
Wheeler’s 1.5″ Lift Add-A-Leaf Set for 1996-2004 Tacoma
- Suits 1996 to 2004 Tacoma 4×4 and Pre-Runner
- Includes 2 single add-a-leafs and 2 longer center pins
- Works with factory length u-bolts or aftermarket
- Adds 1.5″ of lift approximately on dual cab short bed models. Single or Access cab models may see different lift heights
- Added constant load on the rear of the truck may reduce the total added lift height, but this will support additional weight better than the stock leaf pack
- Feature diamond cut ends and anti-friction pads for smooth, squeak free performance
- Instructions
(9 reviews) -
Leaf Springs - Tacoma 1st Gen
OMESB121 Tacoma Leaf Spring Bushing Kit | 1998-2004 Tacoma
- Suits 1998-2004 Toyota Tacoma 4×4 and Prerunner
- 1 kit fits both ends of ONE leaf spring (the fixed end and the shackle end top and bottom)
- Each kit comes with as pictured
- Order 2 kits to replace the bushings in 2 leaf springs
- Polyurethane bushings with steel sleeves
- Color: Yellow
- Material: Polyurethane
- Includes Shackle Bushing: Yes
- Includes Spring Pad Bushings: Yes
- Includes Sleeve: Yes
- Includes Hardware: No
- Estimated Install Time (Hours): 2
(9 reviews) -
Leaf Springs - Tacoma 1st Gen
OME EL122RB 2.25″ Leaf Spring for Toyota Tacoma 1998-2004
- Suits Toyota Tacoma 1st Gen 1998-2004 (will not fit the 1996 or 1997 models)
- Lifts 2.25″ over stock height
- This is the EL122RB – which is the sjhorter side and usually mounts onto the passenger side
- Draw-tapered and diamond cut leaves
- Bolted leaf clamps allow installation of anti-squeak nylon liners
- Fully scragged to reduce the risk of sagging
- Load tested to ensure the spring meets the required specification
- Military wrap design provides added safety
- Re-greasable nylon interleaf anti-friction pads reduce friction at the leaf tips
- Flat axle seat area allows a positive, safe axle mount and reduces spring stress
- Shot peened to reduce spring stress and increase spring life
- Two-stage leaf pack featured on most rear springs for optimum comfort
- Color: Black
- Weight: 26.2 kg
- Material: Steel
- Spring Rate: 120 / 283 lbf/in
- Eye Diameter: 40 mm (F) / 40 mm (R)
- Number Of Leaves: 5+2
- Primary Free Camber: 189 mm
- Warranty: 3 YR
- The other side leaf spring as well as Bushings and U-Bolts are sold separately
(11 reviews) -
Leaf Springs - Tacoma 1st Gen
OME EL122RA 2.25″ Leaf Spring for Toyota Tacoma 1998-2004
- Suits Toyota Tacoma 1st Gen 1998-2004 (will not fit the 1996 or 1997 models)
- Lifts 2.25″ over stock height
- This is the EL122RA – which is the taller side and usually mounts onto the driver’s side
- Draw-tapered and diamond cut leaves
- Bolted leaf clamps allow installation of anti-squeak nylon liners
- Fully scragged to reduce the risk of sagging
- Load tested to ensure the spring meets the required specification
- Military wrap design provides added safety
- Re-greasable nylon interleaf anti-friction pads reduce friction at the leaf tips
- Flat axle seat area allows a positive, safe axle mount and reduces spring stress
- Shot peened to reduce spring stress and increase spring life
- Two-stage leaf pack featured on most rear springs for optimum comfort
- Color: Black
- Weight: 26.2 kg
- Material: Steel
- Spring Rate: 120 / 283 lbf/in
- Eye Diameter: 40 mm (F) / 40 mm (R)
- Number Of Leaves: 5+2
- Primary Free Camber: 204 mm
- Warranty: 3 YR
- The other side leaf spring as well as Bushings and U-Bolts are sold separately
(5 reviews)
