Your cart is currently empty!
Leaf Springs - Tacoma 3rd Gen
Showing all 16 resultsSorted by popularity
-
Tacoma 3rd Gen (2016-2023)Dobinsons Tacoma L59-111-R Leaf Springs Pair for 2005 to 2023 (500-800LBS)
- Lifts Dual Cab Short Beds (DCSB) 2.25″ with 500-800LBS of added weight (more weight=less lift)
- Lifts Access Cab Long Beds (ACLB) 2-2.25″ with 0-200LBS of added weight
- Sold in pairs
- Each pack has 6 leaves
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Click here for Extra Leaf Kit for additional load support
- 3rd leaf down from the top can be removed to reduce spring rate, making springs medium load
- These are leaf springs ONLY and don’t come with bushings or any other parts. Scroll down for add-ons that go with these springs
(5 reviews) -
DobinsonsDobinsons Tacoma L59-110-R Leaf Springs Pair for 2005-2023 (0-220LB Load)
- Suits 2005-2023 Toyota Tacoma. Lifts dual cab short beds 2-2.25″ with 0-220LBS load, and 1″ on a Long Bed
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Click here for Extra Leaf Kit for additional load support
- These are leaf springs ONLY and don’t come with bushings or any other parts. Scroll down for add-ons that go with these springs
- Sold as a pair – they are not side-specific
(4 reviews) -
Tacoma 3rd Gen (2016-2023)
Dobinsons Tacoma L59-112-R Heavy Duty Leaf Springs Pair for 2005-2023 (800-1200LBS)
- Suits Toyota Tacoma 2005-2023, lifts 2-2.25″ with at least 800LBS of constant load on the rear end
- Sold in pairs
- Each pack has 7 leaves
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Click here for Extra Leaf Kit for additional load support
- These are leaf springs ONLY and don’t come with bushings or any other parts. Scroll down for add-ons that go with these springs
(10 reviews) -
Dobinsons
Dobinsons Tacoma Add-A-Leaf to L59-110-R leaf pack Kit (2 leafs + 2 pins)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Converts L59-110-R to L59-111-R
- Adds 100KG (220LB) constant load rating to existing springs
- Includes 2 x add-a-leafs and 2 x longer center pins
- Batch code must be 15134 and above
- See attached photo that shows how the clamps on your springs must look in order to fit this add-a-leaf to the pack
(6 reviews) -
Sale!15% off Year End SaleAdd-a-Leaf
Wheeler’s 3 Leaf Progressive Add-A-Leaf Set – 1.5″ Lift | 95-23 Tacoma 99-06 Tundra
- Suits 1995-2004 and 2005-2023 Toyota Tacoma 4×4 and Pre-Runner, and 1999-2006 Toyota Tundra
- Includes 2 x Progressive add-a-leaf sets (3 leaves each), 2 longer center pins and replacement longer U-bolts
- Adds 1.5″ of lift approximately. Different bed/cab configurations could see variations in lift height
- Added constant load on the rear of the truck may reduce the total added lift height, but this will support additional weight better than the stock leaf pack
- Feature 60mm diamond cut ends and anti-friction pads for smooth, squeak free performance
- On some years and/or models, you may need to remove the front clamp from the Add-A-Leaf to avoid interference with the overload spring and gas tank strap
- Instructions
(6 reviews) -
Dobinsons
Dobinsons Tacoma Add-A-Leaf to L59-112-R Kit (2 leafs + 2 pins)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Converts L59-112-R to L59-113-R
- Adds 100KG (220LB) constant load rating to existing springs
- Includes 2 x add-a-leafs and 2 x longer center pins
- Batch code must be 15134 and above
- When installed, it will be the 6th leaf down from the top of the leaf pack
- See attached photo that shows how the clamps on your springs must look in order to fit this add-a-leaf to the pack
- If you need longer u-bolts due to a lack of threads left, use UB59-437K which are 30mm longer version of UB59-453-2K Ubolts
(4 reviews) -
Dobinsons
Dobinsons Tacoma Add-A-Leaf to L59-111-R leaf pack Kit (2 leafs + 2 pins)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Converts L59-111-R to L59-112-R
- Adds 100KG (220LB) constant load rating to existing springs
- Includes 2 x add-a-leafs and 2 x longer center pins
- Batch code must be 15134 and above
- See attached photo that shows how the clamps on your springs must look in order to fit this add-a-leaf to the pack
(7 reviews) -
Dobinsons
Dobinsons Add-A-Leaf Center Bolt Pin (Single) (10-75)
- Used in place of original leaf bolt when adding a leaf
- Fits L59-111-R-R3 & L59-112-R-R5 ONLY
- Sold individually
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Requires lifted leaf springs to ensure proper fitment
(7 reviews) -
Sale!15% off Year End SaleAdd-a-Leaf
Wheeler’s 2.0″ Lift Add-A-Leaf Set for 2005-2023 Tacoma
- Suits 2005-2015 and 2016+ Tacoma 4×4 and Pre-Runner
- Includes 2 single add-a-leafs and 2 longer center pins
- Works with factory length u-bolts or aftermarket
- Adds 2.0″ of lift approximately on dual cab short bed models. Long bed models won’t see as much lift
- Added constant load on the rear of the truck may reduce the total added lift height, but this will support additional weight better than the stock leaf pack
- Feature 60mm width, diamond cut ends and anti-friction pads for smooth, squeak free performance
- Instructions
(10 reviews) -
Sale!15% off Year End SaleAdd-a-Leaf
Wheeler’s 1.5″ Lift Add-A-Leaf Set for 2005-2023 Tacoma
- Suits 2005-2015 and 2016-2023 Tacoma 4×4 and Pre-Runner
- Includes 2 single add-a-leafs and 2 longer center pins
- Works with factory length u-bolts or aftermarket
- Adds 1.5″ of lift approximately on dual cab short bed models. Long bed models won’t see as much lift
- Added constant load on the rear of the truck may reduce the total added lift height, but this will support additional weight better than the stock leaf pack
- Feature 60mm width, diamond cut ends and anti-friction pads for smooth, squeak free performance
- Instructions
(10 reviews) -
Add-a-Leaf
Icon 1.5″ AAL Add-A-Leaf Set | 1996-2023 Tacoma 2000-2006 Tundra
- Suits 1996-2004 and 2005-2023 Toyota Tacoma 4×4 and Pre-Runner, and 1999-2006 Toyota Tundra
- Provides 1.5” of lift on stock weight rear end
- Lowers rear spring rate for smoother ride quality
- Uses high-quality progressive rate, lifetime guaranteed leaf springs
- Includes U-bolts and required hardware
- Installation is easy, using common socket wrench, torque wrench, and cut-off wheel
- Installation Guide
(7 reviews) -
Leaf Springs - Tacoma 3rd Gen
Icon 2005-2023 Tacoma Multi Rate RXT Leaf Pack w/Add in Leaf
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- 3 user-adjustable spring rates for unique vehicle configurations
- Lift height can vary based on bed length and added weight
- Lift from 1.875″ to 2.625″ unloaded depending how you assemble them, see attached photo describing the process
- Military wrap front eyelet for increased durability
- Galvanized leaf separators reduce friction and aid in corrosion resistance
- Leaf tip inserts reduce noise and increase ride comfort
- Includes additional leaf with 15% or 25% increase in spring rate for more laden “outfitted” vehicles
- Potential for increased wheel travel (when used with RXT shock) without sacrificing up-travel
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
- Direct bolt-in to OEM spring location makes for an easy install
- Bushings are included and pre-installed
- Requires longer U-Bolts for installation
- Sold individually, buy 2 for 1 vehicle
- DOWNLOAD INSTALLATION GUIDE
(5 reviews) -
Leaf Springs - Tacoma 3rd GenFREE SHIPPING
within 48 US StatesAll Pro 2005-2023 3.0″ Tacoma Leaf Springs Pair – Expedition 2.0 1000LBS
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Expedition Version 2.0 Leaf Springs give 3.0″ of lift with 1000LBS of added constant load, less lift with more weight
- Number of leaves 9+1 Overload/Rebound
- Eyelet-to-Eyelet Length (Free): 54-3/8″ (1381 mm)
- Spring Rate: 248lbs/in
- A higher number of thinner leafs provides a smoother, progressive spring rate compared to fewer, thicker leaves.
- Number of Leaves: 9 + 1 Overload/Rebound
- Double “military” wrap provides extra strength for the main leaf
- Eyelet-to-Eyelet Length (Free): 54-3/8″ (1381 mm)
- “Torque Leaf”, an extra half-leaf at the top of the spring pack, increases anti-wrap properties without hindering travel or ride quality.
- Diamond-cut leaf ends to eliminate stress points which may weaken leafs and lead to premature failure
- Teflon anti-friction pads between leafs provide smoother flex, lessen spring wear and reduce noise
- Leafs are shot-peened after forming to relieve stress.
- Every completed spring pack is pre-cycled to their travel extremity for quality control and to reduce the likelihood of initial sag.
- All-Pro leaf springs are sold in pairs, with a complete urethane bushing and sleeve kit.
- Spring Rate: 151 lbs/in for Standard, 207 lbs/in for Expedition, and 248 lbs/in for Expedition 2.0 Leaf Springs
- After installation, the stock rear bumps will no longer be sufficient to prevent the spring from inverting. You must purchase and install a set of bump stops that are of sufficient height to prevent the spring from going negative arch. For best results, we recommend Wheeler’s SuperBumps (sold separately). WOR-306957
- 4″ Extended brake lines – recommended at this lift height
- Requires a suitable 3″ lift shocks to go with them, such as IMS59-50941 or MRA59-A941
- Sold in Pairs
- Made in USA
(7 reviews) -
Leaf Springs - Tacoma 3rd GenFREE SHIPPING
within 48 US StatesAll Pro 2005-2023 3.0″ Tacoma Leaf Springs Pair – Standard
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Standard Leaf Springs give 3″ of lift with up to 200LBS of added load, less lift with more weight
- Long bed models may lift less due to extra weight and load on the springs
- Number of Leaves: 10 + 1 Overload/Rebound
- Eyelet-to-Eyelet Length (Free): 54-3/8″ (1381 mm)
- Spring Rate: 151 lbs/in for Standard
- A higher number of thinner leafs provides a smoother, progressive spring rate compared to fewer, thicker leaves.
- Number of Leaves: 9 + 1 Overload/Rebound
- Double “military” wrap provides extra strength for the main leaf
- Eyelet-to-Eyelet Length (Free): 54-3/8″ (1381 mm)
- “Torque Leaf”, an extra half-leaf at the top of the spring pack, increases anti-wrap properties without hindering travel or ride quality.
- Diamond-cut leaf ends to eliminate stress points which may weaken leafs and lead to premature failure
- Teflon anti-friction pads between leafs provide smoother flex, lessen spring wear and reduce noise
- Leafs are shot-peened after forming to relieve stress.
- Every completed spring pack is pre-cycled to their travel extremity for quality control and to reduce the likelihood of initial sag.
- All-Pro leaf springs are sold in pairs, with a complete urethane bushing and sleeve kit.
- Spring Rate: 151 lbs/in for Standard, 207 lbs/in for Expedition, and 248 lbs/in for Expedition 2.0 Leaf Springs
- After installation, the stock rear bumps will no longer be sufficient to prevent the spring from inverting. You must purchase and install a set of bump stops that are of sufficient height to prevent the spring from going negative arch. For best results, we recommend Wheeler’s SuperBumps (sold separately). WOR-306957
- 4″ Extended brake lines – recommended at this lift height
- Requires a suitable 3″ lift shocks to go with them, such as IMS59-50941 or MRA59-A941
- Sold in Pairs
- Made in USA
(7 reviews) -
Dobinsons
Dobinsons Single Caster Wedge 60MM Wide – 3 Degrees
- 3 Degree Caster shim can be used to correct front caster / pinion angle or rear pinion angle on a 60mm wide leaf spring
- Sold individually
- Suits the following Dobinsons leaf spring part numbers:
- 106-4+3-R
- 106-5+3-R
- B2600-4X4-R
- DAI-009-F
- DAI-011-R
- DAI-015-R
- DAI-020-F
- DAI-021-R
- F77-5+2-R
- F77-5L-F
- HIL-001-F
- HIL-002-F
- HIL-003-F
- HIL-006-R
- HIL-010-F
- HIL-034-R
- HIL-035-R
- HIL-4+2-R
- HIL-5+2-R
- L19-131-R
- L19-132-R
- L19-133-R
- L21-140-R
- L21-141-R
- L21-142-R
- L39-030-R
- L39-031-R
- L39-032-R
- L45-002-R
- L45-003-R
- L45-004-R
- L45-151-R
- L45-152-R
- L45-153-R
- L45-154-R
- L59-040-R
- L59-041-R
- L59-042-R
- L59-110-R
- L59-111-R
- L59-112-R
- L59-120-R
- MAZ-003-R
- MK-6L-F
- MK-7L-F
- MQ-6L-F
- MQ-7L-F
- MQ-UTE-R
- MQ-WAG-R
- NAV-005-R
- NAV-4WD-R
- NIS-260-F
- RODE-008-R
- RODE-011-R
- RODE-012-R
- RODE-013-R
- TOY-470-R
- UAZ-004-R
- UAZ-006-R
(0 reviews) -
Leaf Springs - Tacoma 3rd GenFREE SHIPPING
within 48 US StatesAll Pro 2005-2023 3.0″ Tacoma Leaf Springs Pair – Expedition 500LBS
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Expedition Leaf Springs give 3.0″ of lift with 500LBS of added constant load, less lift with more weight
- Number of Leaves: 9 + 1 Overload/Rebound
- Eyelet-to-Eyelet Length (Free): 54-3/8″ (1381 mm)
- Spring Rate: 207 lbs/in
- A higher number of thinner leafs provides a smoother, progressive spring rate compared to fewer, thicker leaves.
- Number of Leaves: 9 + 1 Overload/Rebound
- Double “military” wrap provides extra strength for the main leaf
- Eyelet-to-Eyelet Length (Free): 54-3/8″ (1381 mm)
- “Torque Leaf”, an extra half-leaf at the top of the spring pack, increases anti-wrap properties without hindering travel or ride quality.
- Diamond-cut leaf ends to eliminate stress points which may weaken leafs and lead to premature failure
- Teflon anti-friction pads between leafs provide smoother flex, lessen spring wear and reduce noise
- Leafs are shot-peened after forming to relieve stress.
- Every completed spring pack is pre-cycled to their travel extremity for quality control and to reduce the likelihood of initial sag.
- All-Pro leaf springs are sold in pairs, with a complete urethane bushing and sleeve kit.
- Spring Rate: 151 lbs/in for Standard, 207 lbs/in for Expedition, and 248 lbs/in for Expedition 2.0 Leaf Springs
- After installation, the stock rear bumps will no longer be sufficient to prevent the spring from inverting. You must purchase and install a set of bump stops that are of sufficient height to prevent the spring from going negative arch. For best results, we recommend Wheeler’s SuperBumps (sold separately). WOR-306957
- 4″ Extended brake lines – recommended at this lift height
- Requires a suitable 3″ lift shocks to go with them, such as IMS59-50941 or MRA59-A941
- Sold in Pairs
- Made in USA
(7 reviews)
