Your cart is currently empty!
Tacoma 4th Gen (2024-2025+)
Showing 1–30 of 51 resultsSorted by popularity
-
Full Suspension Kits - Tacoma 4th Gen (5)
-
Shocks + Struts - Tacoma 4th Gen (8)
-
Control Arms - Tacoma 4th Gen (9)
-
Skid Plates, Sliders + Racks - Tacoma 4th Gen (17)
-
Bump Stops - Tacoma 4th Gen (3)
-
Coil Springs - Tacoma 4th Gen (9)
-
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons Adjustable Rear Sway Bar Link Pair | SE59-591
- Suits the rear of Toyota Tundra 2022-2025+, Toyota Sequoia 2023-2025+, Toyota Tacoma 2024-2025+, Toyota Land Cruiser 300 Series 2022-2025+, Lexus GX550, Toyota Land Cruiser 250 Series 2024-2025+
- Order 1 for 1 vehicle (sold as a pair)
- Heavy Duty, zinc plated, with high quality ball joint ends for long life
- Kit includes 2 sway bar links, everything as shown in the photo, enough for 1 vehicle
- Adjustable length to suit lift heights of 1″ to 4″
- Watch a video here to see more about how this style of link adjusts: https://youtu.be/lZACSaE2PHI
- Photo is of the product installed on a 2022 Tundra
(5 reviews) -
Dobinsons
Dobinsons 15mm Rear Spacer | 2022+ Tundra Sequoia LC300 Tacoma
- Suits 2022-2025+ Toyota Tundra, 2023-2025+ Toyota Sequoia, 2022-2025+ Toyota Land Cruiser 300 Series, 2024-2025+ Toyota Tacoma
- High Quality Polyurethane, maintains height over time
- Fits on top of coil spring, below the OE isolator
- Sold as 1 piece
- Lasts longer than rubber
- Easy to add lift height to correct for vehicle lean
- Adds 15mm (0.6″) of rear lift
- Photo for illustration purposes
- There’s also a front spacer option
(6 reviews) -
Bump Stops + SpacersFREE SHIPPING
within 48 US StatesTimbren Active Off Road Rear Bump Stops | Tundra Sequoia LC250 Tacoma GX
- Suits the Rear of 2022-2025+ Toyota Tundra, 2023-2025+ Sequoia, 2024-2025+ Land Cruiser 250, Lexus GX550, 2024-2025+ Tacoma with coil springs
- Active Off-Road Bumpstops provide off-road enthusiasts greater control over their vehicles’ suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable, and quiet axle engagement and disengagement.
- Unlike OEM bump stops, Active Off-Road Bumpstops are made from natural rubber. Just like our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.
- ABSTORTNDR replaces the rear OEM bump stops on the 2022 Toyota Tundra. Upgrade to Active Off-road Bumpstops and experience the difference.
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Installation Instructions
(15 reviews) -
Sequoia 3rd Gen (2023-2025+)
Dobinsons C59-817V Rear Coil Springs Pair
- Dobinsons C59-817V Rear Coils for the 2023+ Toyota Sequoia (stock height) and 2021+ Land Cruiser 300 Series (10mm lift)
- On a Sequoia, these are Stock Height coils with Stock Weight on a standard model (not for TRD Pro)
- 2024+ Land Cruiser 250 – 40mm(1.6″) Lift with 175-330LBS constant rear added weight
- 2024+ Lexus GX550 – 50mm(2.0″) Lift with 175-330LBS constant rear added weight
- 2024+ Tacoma 3.0″ lift with stock weight, 2.25″ lift with 100lbs constant added weight, 1.25″ lift with 175-330lbs constant weight added.
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Variable Rate Coils
- Longer shocks are recommended
- Select from Twin Tube, IMS Monotube or MRA 3-Way Adjustable with Remote Resi
(12 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
Tundra 3rd Gen (2022-2025+)FREE SHIPPING
within 48 US StatesDobinsons Adjustable Rear Upper Trailing Arms Pair | WA59-571K
- Suits Toyota Tundra 2022-2025+, Sequoia 2023-2025+, Land Cruiser 250 Series 2024-2025+, and Tacoma 2024-2025+ and Lexus GX550 2024+
- Fully adjustable to properly set the length and pinion angle
-
On car adjustable with a left hand threaded side (Silver Nut) and a right hand threaded side (Gold Nut)
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- **Not suitable for vehicles with rear height sensors (attached to OEM arms)
- Trailing arms DO NOT have headlight adjustment bracket
- Instructions written down below in the description
(4 reviews) -
Sequoia 3rd Gen (2023-2025+)
Dobinsons C59-821V Rear Coil Springs Pair
- Dobinsons C59-821V Rear Coils for the 2023+ Toyota Sequoia, 2022+ Land Cruiser 300 Series and 2024+ Land Cruiser 250 Series and Lexus GX550
- Lifts 2″ with Stock Weight on a standard model, 1″ with 220-440LBS constant added weight, and 1″ with stock weight on a TRD Pro (TRD Pro comes 1″ lifted from the factory)
- Also suits 2021+ Land Cruiser 300 Series, gives 30mm lift with 220-440LBS constant added weight.
- Also suits 2024+ Land Cruiser 250 and Lexus GX550 – 2.0″ Lift with 990-1200LBS constant rear added weight
- Also suits the 2024+ Toyota Tacoma – 2.25″ lift with 440-660lbs constant weight added, 1.25″ lift with 880-1210lbs constant weight added
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Variable Rate Coils
- Longer shocks required, the factory shocks are not long enough to run with these coils
- Select from Twin Tube, IMS Monotube or MRA 3-Way Adjustable with Remote Resi
(4 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
Sequoia 3rd Gen (2023-2025+)
Dobinsons C59-819V Rear Coil Springs Pair
- Dobinsons C59-819V Rear Coils for the 2023+ Toyota Sequoia and 2022+ Land Cruiser 300 Series (30mm lift)
- Lifts the Sequoia 1.0″ with Stock Weight on a standard model and 0″ with stock weight on a TRD Pro (TRD Pro comes 1″ lifted from the factory)
- Suits 2024+ Land Cruiser 250 – 1.6″ Lift with 550-770LBS constant rear added weight
- Suits 2024+ Lexus GX550 – 2.0″ Lift with 550-770LBS constant rear added weight
- Suits 2024+ Tacoma – 2.25″ lift with 175-330lbs constant weight added, 1.25″ lift with 440-660lbs constant weight added.
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Variable Rate Coils
- Longer shocks are necessary at this lift height
- Select from Twin Tube, IMS Monotube or MRA 3-Way Adjustable with Remote Resi
(15 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
Tundra 3rd Gen (2022-2025+)FREE SHIPPING
within 48 US StatesDobinsons Adjustable Rear Lower Control Arms Pair for Tundra + Tacoma
- Suits all 2022-2025+ Toyota Tundra and 2024-2025+ Toyota Tacoma
- Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
- Made from HSLA (High Strength Low Alloy) Steel
- 40mm OD and 6mm wall thickness with support brace
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then E-coated black, for the ultimate finish and protection
- Sold as a pair
(4 reviews) -
Roof RacksFREE SHIPPING
within 48 US StatesRCI 12″ HD Low Profile Truck Bed Rack
- For Short Bed Trucks from 46-58″ in Bed Length
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier, Ford Ranger, Chevy Colorado, GMC Canyon, Ford F150, Toyota Tundra, etc
- Rack is 12″ tall from bed rail to top of rack
- Mount anything from lights, Hi-lift, co2, fire extinguisher, quick-fist, roto-pax, spare tire, roof top tent, etc
- This is our HD model, utilizing three cross-members spanning the truck bed, this rack is has the highest weight capacity and provides even weight distribution on the trucks bed side rails
- Built in mounting points allow unlimited options for adding accessories
- Bolts to inside of bed rails or can alternatively be mounted with optional “drill-free” clamps to mount like a truck topper (Not applicable when bolting to accessory rail systems)
- Rack is 12″ tall from bed rail to top of rack
- Adjustable width adapts to any truck bed from 54″ – 64″ width between the bed rails
- Three length options to fit any application from 5′ beds to 6’+
- Maintains very good visibility through the back window despite the low overall rack height
- Using this rack will minimize the aerodynamic drag normally associated with roof top tents by keeping it largely below the roof-line
- Slotted mounting points on top of rack accept nearly any roof top tent making mounting a breeze
- Includes TWO top braces, for unlimited accessory and tent mounting options
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer. This extra step is expensive and time consuming but ensures our paint job will outlast anything else in the industry!
- Easy bolt together assembly, takes about 45 minutes to install with only a few basic hand tools
- All hardware for installation is included
- Weights
- 5ft (46″) 86lbs
- 5ft6in(52″) 92lbs
- 6ft(58″) 96lbs
- Adjustable Bedrack Install Guide
- Made in Loveland, Colorado USA
(2 reviews) -
Tacoma 4th Gen (2024-2025+)FREE SHIPPING
within 48 US States2024+ Tacoma Skid Plates Package from RCI
- For 2024+ Toyota Tacoma 4th Gen
- Includes engine, transmission and transfer-case skid plates.
- Protects front two cross-members, low hanging front differential, oil pan, transmission, second and third cross-members, exhaust cross pipe, and transfer-case
- Excellent addition or replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Built in oil drain hole allows easy access and ability to change oil without removal of plate
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat standard on steel skid plates for a rust resistant, durable and high quality finish
- Hardware included
- Direct bolt on addition to existing factory attachment points, no drilling required!
- Please note that some images show our A-Arm skid plates however they are not included with the skid plate package
- Verified to fit 4×4 TRD Offroad non-hybrid models. Suspected to fit other models, but not yet verified
- MADE IN LOVELAND, COLORADO, USA
(0 reviews) -
Rear DrawersFREE SHIPPING
within 48 US StatesOVS Slide Out Bed Extension for 5.0FT Short Bed Trucks
- Suits 5.0FT Short Bed Mid-Size Trucks
- Mid Size Short Bed 5.0′: 57.08″ long x 42.12″ wide x 7.28″ tall
- Potential Vehicle Fitments (Measure your truck bed first!!): Tacoma, Frontier, Gladiator, Ranger, Hilux, Colorado
- These are made in 3 different sizes. Mid-Size Truck 5.0Ft Long, Full Size Truck 5.5FT Long and Full Size Truck 6.5FT Long
- 75% Extension Bed Cargo Slide
- 1250 LBS. Max Load Capacity
- Steel Frame Construction
- 304 Stainless Steel Hardware
- Single Pull Latch for Easy Operation
- Multiple Anchor Points for Cargo Security
- Great for camping, easily slide out all your gear
- Excellent for work use, keep your tools and heavy objects organized, then slide them out easily to reach them
- Perfect for people with truck caps or canopies, easier to reach the parts out of the truck
- Some photos show the different sized models
(0 reviews) -
Tacoma 4th Gen (2024-2025+)FREE SHIPPING
within 48 US StatesAir Lift LoadLifter 5000 Airbag Kit for Toyota Tacoma 2024-2025+
- Made specifically for the 2024-2025+ Toyota Tacoma with coil spring rear suspension
- Suits 2WD and 4×4 Models
- Up to 5,000 lbs. of leveling capacity
- Air Springs fully adjustable from 5-100 PSI for precise control
- Levels your vehicle when towing or hauling for a safe, comfortable ride.
- Eliminates sag and bottoming out
- Upper and lower roll plates to protect air springs
- Easy to install with included instructions
- No frame drilling required
- Installs on the outside of the coils (not inside)
- Features Air Lift’s Limited Lifetime Warranty and 60 Day Ride Satisfaction Guarantee
- Intended for stock ride height trucks and not those that are lifted
- Installation Guide
- Will not work with rear leaf-spring equipped models!!
(8 reviews) -
Skid Plates - LC250
RCI Land Cruiser 250 Catalytic Guards | 2024-2025
- Suits Toyota Land Cruiser 250 from 2024+
- Covers open space between frame and transmission skid plate
- Compatible with both steel and aluminum RCI transmission skid plates – REQUIRED
- Powder coated with a two stage primer and textured black powder coat for an extremely durable, high quality finish
- All hardware and installation instructions provided
- Installs in minutes
- Made in the USA
- INSTALL GUIDE (Click Here)
- Recommended to run in conjunction with the Engine Skid Plate and Transmission Skid Plate
- Transmission skid plate is REQUIRED in order to run these catalytic guards
- Please note, some images show the transmission skid plate that is necessary for installing the catalytic guards however the skid plate is not included with the catalytic guards
(0 reviews) -
Skid Plates - LC250FREE SHIPPING
within 48 US StatesRCI Land Cruiser 250 Transfer Case Skid Plate | 2024-2025
-
- Suits Toyota Land Cruiser 250 from 2024+ and Hybrid 2024+ Tacoma TRD Pro DCSB Iforce Max
- Protects third cross-member, transfer-case, and exhaust pipe
- Reinforced edges between cross-members for maximum strength and rigidity
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Compatible with Hybrid Model
- Made in the USA
- INSTALL GUIDE (Click Here)
- Recommended to run in conjunction with the Engine Skid Plate and Transmission Skid Plate
(0 reviews) -
-
Skid Plates - LC250FREE SHIPPING
within 48 US StatesRCI Land Cruiser 250 Transmission Skid Plate | 2024-2025
-
- Suits Toyota Land Cruiser 250 from 2024+ and Hybrid 2024+ Tacoma TRD Pro DCSB Iforce Max
- Protects transmission, second and third cross-members
- Service openings for maintenance without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Compatible with Hybrid model
- Made in the USA
- INSTALL GUIDE (Click Here)
- Recommended to run in conjunction with the Engine Skid Plate
(0 reviews) -
-
Full Suspension Kits - Tacoma 4th GenFREE SHIPPING
within 48 US StatesETA is Spring 2025Dobinsons 2-3″ MRA 3-Way Adjustable Lift Kit | Toyota Tacoma 2024+
- Suits 2024+ Toyota Tacoma 4×4 Models with coil springs in the back
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Choose from 2 or 3″ of front lift, and 2″-3″ of rear lift, based on accessory weight. The more you lift, the more parts you’ll need
- Nitrogen Gas Charged Remote Reservoir 3-way adjustable Shocks, Superior Design, thicker walls, longer travel
- Adjust high and low speed compression (HSC and LSC) and rebound adjustment front and rear
- Massive 66mm (2.6″) body size with 60mm pistons front and rear
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen in the external reservoir
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Does not suit leaf spring equipped models
- Coil seat for MRA59-A490 should be set at 251mm (9.9″) from the strut bushing eye
- Front MRA struts assembly instructions
- This kit is also available with non-adjustable internal resi (IMS) Struts and Shocks – Here
(0 reviews) -
Full Suspension Kits - Tacoma 4th GenFREE SHIPPING
within 48 US StatesETA is Spring 2025Dobinsons 2-3″ IMS Lift Kit | Toyota Tacoma 2024+
- Suits 2024+ Toyota Tacoma 4×4 Models with coil springs in the back
- Choose from 2 or 3″ of front lift, and 2″-3″ of rear lift, based on accessory weight. The more you lift, the more parts you’ll need
- Fully rebuildable and re-valvable IMS monotube shocks
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Front IMS struts for this application have multiple clip heights to adjust ride height if needed
- Full 2 year limited warranty, no set rebuild time period
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Does not suit leaf spring equipped models
- Coil seat for IMS59-60490 should be set at 251mm (9.9″) from the strut bushing eye
- Front IMS struts assembly instructions
- This kit is also available with 3-Way Adjustable Remote Resi Struts and Shocks – Here
- Note: A diff drop kit should be run if you have a base model Tacoma or if you’re running 3″ of lift
(0 reviews) -
DobinsonsETA is Spring 2025
Dobinsons C59-869V Rear Coil Springs Pair
- Dobinsons C59-869V Rear Coils for the 2024+ Toyota Tacoma – 2.0″ lift with stock weight, 1.25″ lift with 100lbs constant added weight.
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Variable Rate Coils
- Longer shocks are recommended
(0 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
DobinsonsETA is Spring 2025
Dobinsons Tacoma Strut Mounts Pair for Toyota Tacoma 2024+
- Made specifically for the 4×4 Toyota Tacoma 2024-2025+
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- Enough for 1 vehicle, sold in pairs
- Photo for illustration purposes
(0 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesETA is Spring 2025Dobinsons MRA59-A490 3-Way Adjustable Front Struts Pair | Tacoma 2024+
- Suits 2024+ Toyota Tacoma
- Can be used with OEM coils or with Dobinsons lifted coils
- Height adjustable with a fully threaded body
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- SOLD IN PAIRS
- Full 2 year limited warranty, no set rebuild time period
- Does not include coil springs or top mounts – sold separately
- Must mount the banjo fitting and hose inwards on MRA struts
- Coil seat for MRA59-A490 should be set at 251mm (9.9″) from the strut bushing eye
- Photos for illustration purposes only
- New Dobinsons Strut Mounts should be run with these for strength and longevity
(0 reviews) -
Tacoma 4th Gen (2024-2025+)FREE SHIPPING
within 48 US StatesIcon 2024+ Tacoma Rear 0.5″ Lift Triple Rate Coil Spring Pair
- Suits 2024-2025+ Toyota Tacoma with coil spring rear end
- Will not fit 2024 Toyota Tacoma TRD PreRunner
- Sold as a Pair
- 0.5″ rear lift height over stock
- Triple rate rear coil springs with ICON-engineered droop, ride, and overload rates
- Significantly improves on- and off-road ride quality and performance over stock
- Dual stage powder coating for corrosion resistance
- Lifetime guarantee against sagging/breakage
(0 reviews) -
ExceptionsFREE SHIPPING
within 48 US StatesDobinsons Rear Adjustable Hydro Bump Stop Kit | Tundra Tacoma
- Complete hydro bump stop kit to replace the factory coil isolator and internal bump stop
- Suits the Rear of Toyota Tundra 2022-2025+ and Toyota Tacoma 2024-2025+ with coil spring rear end
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment to adjust when the stop will engage
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 110 PSI
- Extra Short Dead Lengths For Compact Fitment
- Includes full fit kit, 2 hydro bump stops, and spacer blocks for frame-mounted external bump stops
- Kit Includes:
- HBS59-027FK Mounting Kit
- HBS56-009 Hydraulic Bump Stops
- 46mm – 1.8″ stroke, 105mm – 4″ thread length, 188mm – 7.4″ extended length, 142mm – 5.6″ compressed length
(0 reviews) -
Dobinsons
Dobinsons C59-822 Front Coil Springs Pair
- Suits Toyota Land Cruiser 300 Series – Lifts 50mm – 2″ / 110-150lb Constant Front End Load
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 445mm free height, 19mm wire diameter, 508 LBF/in spring rate
- Sold in Pairs
(0 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
Dobinsons
Dobinsons C59-820 Front Coil Springs Pair
- Suits Toyota Land Cruiser 300 Series – Lifts 50mm – 2″ / Stock Load
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 445mm free height, 18mm wire diameter, 485 LBF/in spring rate
- Sold in Pairs
(0 reviews)$270.00 Select options This product has multiple variants. The options may be chosen on the product page -
Tacoma 4th Gen (2024-2025+)FREE SHIPPING
within 48 US StatesETA is Spring 2025Dobinsons IMS59-60490 2.6″ IFP Front Struts Pair | 2024+ Tacoma
- Suits Toyota Tacoma 2024+
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 22mm / 7/8″ shaft diameter on front struts
- Full 2 year limited warranty, no set rebuild time period
- Standard coil seat height should be set to 251mm (9.9″)from the center of the lower hole to the base notch where the coil sits
- SOLD IN PAIRS
- New Dobinsons Strut Mounts should be run with these for strength and longevity
(0 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons Rear Adjustable Panhard Rod for 2024+ Tacoma
- Suits Toyota Tacoma 2024+
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Zinc plated steel and E-coated with high quality rubber bushes supplied
- Off-car adjustable, cannot be set while fully installed
- For 35mm (1.25″) of lift or more
- Rubber Bushes installed and offer greater flexibility than polyurethane, providing maximum articulation
- Panhard rod measures 41″ compressed and can be extended up to 44″ eye to eye
(0 reviews) -
Skid Plates, Sliders + Racks - Tacoma 4th Gen
Rear Control Arm Skids | 2024+ Tacoma
- Suits 2024+ Toyota Tacoma with coil spring rear suspension
- Protects the front of the rear lower control arm links and factory link mounts on the frame
- Smooth, flat surface that easily slides over obstacles
- Black powder coat included for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Includes heavy duty hardware
- Kit includes both driver and passenger side lower link skids
- Confirmed Fitment on 24′ TRD OR only should fit all Tacoma models with rear coil suspension
- Made in USA
- Installation Instructions
(0 reviews) -
Full Suspension Kits - Tacoma 4th GenFREE SHIPPING
within 48 US StatesIcon 2024 Toyota Tacoma Suspension Kit 1.25-3″ Lift – Stage 1
- Suits 2024+ Toyota Tacoma 4×4
- Vehicle specific tuned front and rear shocks for superior shock damping and control
- Increased wheel travel and improved ride quality over stock
- Front differential drop provides better maximum operating angle for CV joints and maximizes available wheel travel on 4WD models
- Adjustable coilovers provide 1.25-3″ front lift height over stock
- Included rear shocks are compatible with 0-1″ of rear lift over stock
- 6061 aircraft grade aluminum CNC machined components
- Corrosion resistant CAD plated coilover shock bodies with 7/8″ shafts
- ICON engineered coil springs
- FK Rod End bearings for extended longevity and minimal deflection
- 2.0 Aluminum Series internal reservoir rear shocks with 5/8″ shafts
- This kit is configured for fitment on 4WD models. If installing onto a 2WD 2024 Toyota Tacoma SR, SR5, or TRD Sport, front differential drop kit part number 55160 is not needed and the other suspension system components can be ordered individually with full system functionality
- Will not fit 2024 Toyota Tacoma TRD PreRunner or 2024 Toyota Tacoma Limited AWD
(0 reviews) -
Sale!Overland Vehicle Systems (OVS)FREE SHIPPING
within 48 US StatesLD TACT Truck Bed Tent – Mid-Size Truck 5.0FT Bed
- For Mid-Size Truck Beds measuring 5.0-5.2 FT in length
- For Vehicles such as Chevy Colorado, Ford Ranger, GMC Canyon, Nissan Frontier, Toyota Tacoma
- 2-3 Person Design with Spacious Interior and Headroom
- Perimeter Skirt and Reinforced Floor Keeps Truck Bed Dry
- Color Coated Poles for Quick Deployment
- Large Windows with Mesh Allows for Ventilation
- Premium 420D Material with Removable Rainfly
- Padded Elastic Anchor Points for Easy Scratch-Free Fit
- Compact Carrying Bag is Included
- Internal Storage Options
- Setup Instructions
- This truck bed tent style is made in 3 sizes, 5FT, 5.5FT and 6.0FT Truck Beds
(3 reviews) -
Control Arms - Tundra 2022+FREE SHIPPING
within 48 US StatesIcon Billet Adjustable Toyota Track Bar | 22+ Tundra 23+ Sequoia 24+ Tacoma
- Suits 2022-2025+ Tundra and 2023-2025+ Sequoia and 2024-2025+ Tacoma 4×4 Models
- Vehicle specific design
- Helps to free up bind during rear suspension travel and articulation
- Heavy duty PTFE-lined FK Rod Ends offer minimal deflection and maximum articulation
- On-vehicle adjustable for precise track alignment
- CNC machined 6061 aluminum bar
- Satin anodized finish to match appearance of ICON rear upper and lower links
- Covered by ICON’s Limited Lifetime Warranty
- Installation Guide
- Warranty Info
(10 reviews)
