Control Arms - Tacoma 4th Gen
Showing all 14 resultsSorted by popularity
-
Tundra 3rd Gen (2022-2026+)Dobinsons Adjustable Rear Upper Trailing Arms Pair | Toyota + Lexus
- Suits Toyota Tundra 2022-2026+, Sequoia 2023-2026+, Land Cruiser 250 Series 2024-2026+, and Tacoma 2024-2026+ and Lexus GX550 2024+, and 2025+ 4Runner
- Fully adjustable to properly set the length and pinion angle
-
On car adjustable with a left hand threaded side (Silver Nut) and a right hand threaded side (Gold Nut)
- Comes installed with high quality rubber OE style bushings for maximum flexibility and longevity
- Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
- Oversized adjusters and rod thickness for maximum strength and durability with nut locking feature
- Zinc plated, then powder coated black, for the ultimate finish and protection
- **Not suitable for vehicles with rear height sensors (attached to OEM arms)
- Trailing arms DO NOT have headlight adjustment bracket
- Instructions written down below in the description
(4 reviews) -
LX600 (2022+)THIS SHIPS FREE
within 48 US StatesDobinsons Billet Aluminum UCA’s Pair | LX600 GX550 LC300 LC250 Tacoma 4Runner (no ball joints)
- Super strong billet aluminum front upper control arms (UCA’s)
- Suits the following vehicles:
- 2021+ Toyota Land Cruiser 300 Series (not sold in the USA)
- 2022+ Lexus LX600
- 2024+ Toyota Tacoma 4th Gen
- 2024+ 250 Series Land Cruiser
- 2024+ Lexus GX550
- 2025+ Toyota 4Runner 6th Gen
- Kit for both left and right hand side
- Includes press tools to remove and reuse the OEM ball joints from the OEM UCA’s
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- *Must reuse OEM Washers and OEM ball joints
- Installation Instructions
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
(7 reviews) -
Tundra 3rd Gen (2022-2026+)Dobinsons Adjustable Rear Lower Trailing Arms Pair | Toyota Tundra + Tacoma
- Suits all 2022-2026+ Toyota Tundra and 2024-2026+ Toyota Tacoma
- Comes with high quality rubber OE style bushings installed for maximum flexibility, and zero noise
- Made from HSLA (High Strength Low Alloy) Steel
- 40mm OD and 5mm (0.2″) wall thickness
- Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
- Zinc plated, then E-coated black, for the ultimate finish and protection
- Sold as a pair
(4 reviews) -
Upper Control ArmsTHIS SHIPS FREE
within 48 US StatesIcon Tubular UCA DJ Pro Pair for 2024+ Tacoma + Land Cruiser 250 GX550
- Suits 2024+ Toyota Toyota Tacoma and Land Cruiser 250 and Lexus GX550
- Features patented ICON Delta Joint (U.S. Pat. 10,731,700)
- Built in added caster for better handling on lifted vehicles
- Delta Joint PRO allows maximum articulation without binding
- Delta Joint PRO is 100% serviceable and rebuildable
- Serviceable dual stage polyurethane pivot bushings
- CNC machined housings for bushings and Delta Joint PRO
- 1026 DOM tube construction with black powder coat finish
- Includes billet dust caps for Delta Joint PRO
- Warranty Info
(0 reviews) -
ExceptionsTHIS SHIPS FREE
within 48 US StatesOME UCA’s Upper Control Arms Pair – GX550 LC250 Tacoma 4Runner
- Suits 2024+ Toyota Tacoma, 250 Series Land Cruiser 2024+ and Lexus GX550 and 2025+ Toyota 4Runner
- Forged Ball Joint Housing
- Forged Eyelets
- Heavy Duty greasable Ball Joints
- OME Ball joint protective cap
- GIIRO bushings, free pivoting, grease free and maintenance free
- Increased camber and caster for 2in lift
- ARB’s Intergrit powder coat finish
- Boxed in pairs with foam inserts
- Fitting instructions included
- OME Branded outer sleeve
- Tested and passed to meet VSB14 requirements
- 3 Year Manufacturers Warranty
- Made in Vietnam
- Some images are for illustration purposes
(4 reviews) -
Control Arms - Tacoma 4th GenTHIS SHIPS FREE
within 48 US StatesDirt King Toyota Tacoma Tubular Ball Joint UCA’s Pair for 2024+
- Suits 2024-2026+ model Toyota Tacoma 4th Gens 4×4 – 6 Lug models only
- Pro 4 Series Ball Joints – Forged SAE 4140 housing, 38° of articulation, and induction-hardened ball stud for maximum strength and smoother steering feel
- SilentSpin Bushings – Maintenance-free, greaseless, and engineered for quiet, free-spinning articulation
- Geometry Corrected – Improved caster and pivot angles deliver better handling and control with up to 3” of lift
- 4130 Chromoly Construction – Built with high-strength chromoly tubing and reinforced gussets for extreme durability
- Fully Rebuildable Design – All wear items are replaceable for long-term reliability
- Corrosion-Resistant Finishes – Zinc-plated hardware and black powder coat protect against the elements
- Professionally MIG Welded – Ensures structural integrity for demanding off-road use
- Preassembled – Quick, hassle-free installation with no guesswork
- Includes new control arm bolts so you can cut the old ones out if that makes it easier for removal
- Made in the USA – Built with pride and quality you can trust
- Multiple color options for the ball joint caps and badge plate, select below
- Installation Instructions
(0 reviews) -
DobinsonsDobinsons Rear Adjustable Panhard Rod for 2024+ Toyota Tacoma
- Suits Toyota Tacoma 2024+
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Zinc plated steel and E-coated with high quality rubber bushes supplied
- Off-car adjustable, cannot be set while fully installed
- For 35mm (1.25″) of lift or more
- Rubber Bushes installed and offer greater flexibility than polyurethane, providing maximum articulation
- Panhard rod measures 41″ compressed and can be extended up to 44″ eye to eye
(0 reviews) -
Control Arms - Tundra 2022+THIS SHIPS FREE
within 48 US StatesIcon Billet Rear Upper Trailing Arms Pair | Tundra Sequoia Tacoma LC250 GX550
- Suits 2022-2026+ Tundra and 2023-2026+ Sequoia and 2024-2026+ Tacoma 4×4 Models and 2024-2026+ Toyota Land Cruiser 250 and Lexus GX550
- On vehicle adjustment for different ride heights and pinion angles using ICON’s Double Adjuster System
- CNC machined 6061 aluminum construction
- Large FK Bearing JMX16T PTFE-lined rod ends
- Maintenance free, dual durometer bushings for maximum angularity and noise isolation
- Covered by ICON’s Limited Lifetime Warranty
- Installation Guide
- Warranty Info
(11 reviews) -
Control Arms - Tundra 2022+THIS SHIPS FREE
within 48 US StatesIcon Billet Rear Lower Trailing Arms Pair | 22+ Tundra 23+ Sequoia 24+ Tacoma
- Suits 2022-2026+ Tundra and 2023-2026+ Sequoia 4×4 Models and 2024-2026+ Tacoma
- On vehicle adjustment for different ride heights and pinion angles using ICON’s Double Adjuster System
- Vehicle specific, high clearance design for reduced link contact with obstacles
- Replaceable Nylon Rock Slider to protect the link from damage
- CNC machined 6061 aluminum construction
- Large FK Bearing JMX16T PTFE-lined rod ends
- Maintenance free, dual durometer bushings for maximum angularity and noise isolation
- Covered by ICON’s Limited Lifetime Warranty
- Installation Guide
- Warranty Info
(10 reviews) -
Control Arms - Tacoma 4th GenTHIS SHIPS FREE
within 48 US StatesDirt King Performance Lower Control Arms | Toyota Tacoma 2024+
- Suits Toyota Tacoma 2024-2026+ 4×4 Models
- Set of both Front left and right sides
- CAD designed
- Internally ribbed design for impact protection
- Grease fitting ports for easy servicing
- Zinc plated components for corrosion resistance
- Limit strap tabbing
- Bypass tabbing
- Sway bar tabbing
- Professionally MIG welded
- Proudly made in the USA
- Boxed plate lower control arms
- Delrin bushings
- Weld washers
- Moog ball joints
- Brushed stainless steel logo plates
- Grade 8 mounting hardware
- Durable black powder coat finish
- Dirt King sticker pack
- Installation Instructions
- Recommended: Buy new stronger alignment cam gussets at the same time
(0 reviews) -
Caster and AlignmentDirt King Alignment Cam Gussets | Toyota Tacoma 2024+
- Suits Toyota Tacoma 2024-2026+ 4×4 Models
- The Dirt King alignment cam gussets replace the weak factory cam tabs which commonly bend resulting in the vehicle being out of alignment
- Alignment techs famously get the cam out of position and crank it down against the factory tabs, bending them
- The kit is made from 1/8″ and 3/16″ thick chromoly plates
- Installation requires removing the factory cam plates and welding on the Dirt King cam gussets in it’s place
- Made in the USA
(0 reviews) -
Control Arms - Tacoma 4th GenTHIS SHIPS FREE
within 48 US StatesDirt King Toyota Tacoma Billet UCA’s Pair for 2024+
- Suits 2024-2026+ model Toyota Tacoma 4th Gen 4×4 Models
- CAD designed
- Precision-machined from 6061 aluminum for strength and durability
- Improved caster settings for enhanced handling
- Re-engineered pivot angles for increased articulation
- Adjustable inner pivot system for camber and caster adjustments
- Maintenance-free SilentSpin bushings for smooth, quiet operation
- Heavy-duty Probearing ball joints for long-lasting durability
- Fully rebuildable and replaceable components for easy maintenance
- Compatible with Dirt King shocks for increased lift and suspension travel
- Choose your options down below for what color combination you would like and what joints
- Proudly made in the USA
(0 reviews) -
Control Arms - Tundra 2022+THIS SHIPS FREE
within 48 US StatesIcon Billet Adjustable Toyota Track Bar | Tundra Sequoia Tacoma LC250 GX550
- Suits 2022-2026+ Tundra and 2023-2026+ Sequoia and 2024-2026+ Tacoma 4×4 Models, 2024+ Lexus GX550, 2024+ Toyota Land Cruiser 250
- Vehicle specific design
- Helps to free up bind during rear suspension travel and articulation
- Heavy duty PTFE-lined FK Rod Ends offer minimal deflection and maximum articulation
- On-vehicle adjustable for precise track alignment
- CNC machined 6061 aluminum bar
- Satin anodized finish to match appearance of ICON rear upper and lower links
- Covered by ICON’s Limited Lifetime Warranty
- Installation Guide
- Warranty Info
(10 reviews) -
Tacoma 4th Gen (2024-2026+)THIS SHIPS FREE
within 48 US StatesIcon Billet UCA DJ Pro Pair for 2024+ Tacoma + Land Cruiser 250 + GX550
- Suits 2024+ Toyota Toyota Tacoma and Land Cruiser 250 and Lexus GX550
- CNC machined 6061 billet aluminum construction with satin anodized finish
- Corrects suspension geometry and allows for proper wheel alignment on Tacomas or Land Cruisers with up to 3” of lift
- Quick, precise, on-vehicle adjustment for both caster and camber
- Delta Joint PRO allows maximum articulation without binding
- Delta Joint PRO is 100% serviceable and rebuildable
- FK Rod Ends at chassis pivots for strength and precision driving characteristics
- Built in O-ring sealed dust cover cap
- Installation Manual
- Warranty Info
(0 reviews)
