Your cart is currently empty!
Tundra
Showing 121–150 of 213 resultsSorted by popularity
-
Sale!
Roof RacksRCI 12″ HD Low Profile Truck Bed Rack
- For Short Bed Trucks from 46-58″ in Bed Length
- For Trucks Such As: Jeep Gladiator, Toyota Tacoma, Nissan Frontier, Ford Ranger, Chevy Colorado, GMC Canyon, Ford F150, Toyota Tundra, etc
- Rack is 12″ tall from bed rail to top of rack
- Mount anything from lights, Hi-lift, co2, fire extinguisher, quick-fist, roto-pax, spare tire, roof top tent, etc
- This is our HD model, utilizing three cross-members spanning the truck bed, this rack is has the highest weight capacity and provides even weight distribution on the trucks bed side rails
- Built in mounting points allow unlimited options for adding accessories
- Bolts to inside of bed rails or can alternatively be mounted with optional “drill-free” clamps to mount like a truck topper (Not applicable when bolting to accessory rail systems)
- Rack is 12″ tall from bed rail to top of rack
- Adjustable width adapts to any truck bed from 54″ – 64″ width between the bed rails
- Three length options to fit any application from 5′ beds to 6’+
- Maintains very good visibility through the back window despite the low overall rack height
- Using this rack will minimize the aerodynamic drag normally associated with roof top tents by keeping it largely below the roof-line
- Slotted mounting points on top of rack accept nearly any roof top tent making mounting a breeze
- Includes TWO top braces, for unlimited accessory and tent mounting options
- Heavy duty black textured powder coat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer. This extra step is expensive and time consuming but ensures our paint job will outlast anything else in the industry!
- Easy bolt together assembly, takes about 45 minutes to install with only a few basic hand tools
- All hardware for installation is included
- Weights
- 5ft (46″) 86lbs
- 5ft6in(52″) 92lbs
- 6ft(58″) 96lbs
- Adjustable Bedrack Install Guide
- Made in Loveland, Colorado USA
(2 reviews) -
Bump Stops - Tundra 2022+FREE SHIPPING
within 48 US StatesTimbren Bump Stops Front & Rear | Tundra Sequoia LC250 GX550
- Suits the 2022-2025+ Toyota Tundra, 2023-2025+ Sequoia, 2024-2025+ Land Cruiser 250, Lexus GX550
- Includes both Front and Rear bump stops for the whole vehicle
- Active Off-Road Bump stops provide off-road enthusiasts greater control over their vehicles’ suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable, and quiet axle engagement and disengagement.
- Unlike OEM bump stops, Active Off-Road Bumpstops are made from natural rubber. Just like our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.
- ABSTORTNDR replaces the rear OEM bump stops and ABSTOF replaces the fronts
- Upgrade to Active Off-road Bump stops and experience the difference
- Maintain Full Axle Travel
- Smooth Axle Engagement and Disengagement
- Enhance Suspension Performance
- Progressive Spring Rate
- Absorbs Energy and Cushions Road Shocks
- Stronger Than OEM Bumpstops
- Easy Installation
- Satisfaction Guarantee
- Lifetime Warranty
- Front Instructions and Rear Instructions
(12 reviews) -
Upper Control ArmsFREE SHIPPING
within 48 US StatesDobinsons Billet Aluminum UCA’s Pair | 22-25 Tundra, 23-25 Sequoia (no ball joints)
- Super strong billet aluminum front upper control arms (UCA’s)
- Suits 2022-2025+ Toyota Tundra, 2023-2025+ Toyota Sequoia
- Arms for both left and right hand side
- Must re-use OE ball joints – move them from the original arms over to the Dobinsons arms
- This is due to no aftermarket supplier making replacement ball joints as of yet
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- *Must reuse OEM Washers
- Installation Instructions
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
- Photos for illustration purposes
(0 reviews) -
Tundra 3rd Gen (2022-2025+)
Dobinsons Front Coil Spring Options | Toyota Tundra 2022+ – Pair
- Suits Toyota Tundra 2022-2025+, choose the appropriate lift height that also matches any added weight you’ve put on the truck
- Intended to be run with Dobinsons front struts
- Hybrid Models lift 1-1.5″ less lift than listed here
- These will NOT suit a TRD PRO Strut, they’re a different size
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(12 reviews) -
BrakesFREE SHIPPING
within 48 US StatesPowerbrake X-Line 4×4 Front Toyota Tundra Big Brake Kit for 2000-2006
2000-2006 Toyota Tundra Big Brake Kit Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 350mm x 34mm (13.77″ x 1.33″) 48-vane discs
- Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- For 6-Lug models only (Pre-Runner and 4×4 models)
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- REQUIRES 17″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
(4 reviews)$2,675.00 Select options This product has multiple variants. The options may be chosen on the product page -
Tundra 3rd Gen (2022-2025+)FREE SHIPPING
within 48 US StatesDobinsons Twin Tube Rear Shocks Pair | Toyota Tundra 2022+
- Suits the rear of a 2022-2025+ Toyota Tundra with 2-2.5″ of Lift
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings
- Double Chrome hardened rods
- Metal shock boot to protect rod from damage
- Sold in Pairs
(8 reviews) -
Dobinsons
Dobinsons 2-2.5″ Lift Kit Toyota Tundra 2000-2006 with Quick Ride Rear (all options)
- For 2000-2006 Toyota Tundra 4×4 with V8 Engine
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, 2 Front Coil Springs (a pair), Rear Spacer Blocks and U-Bolts
- Choose from twin tube, IMS or MRA shocks in the drop down menu below
- It’s recommended that the IMS and MRA coilovers to be run with a diff drop kit and aftermarket UCA’s for coilover clearance and correct travel
(13 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons MRA59-A685 3-Way Adjustable MRA Rear Shocks Pair | 80 Series 6″ Lift + Tundra
- Suits Toyota Land Cruiser 80 Series and Lexus LX450 1990-97, suitable for 6″ of lift, and 2022-2025+ Toyota Tundra with Long travel rear suspension
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 22mm / 7/8″ shaft diameter
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- 714mm extended, 440mm compressed
- Installation Instructions of the MRA Shocks
- Bump stop extensions and longer brake lines must be run with these longer shocks
(19 reviews) -
Sale!Add-a-LeafOn Sale All April !!!
Icon 1.5″ AAL Add-A-Leaf Set | 1996-2023 Tacoma 2000-2006 Tundra
- Suits 1996-2004 and 2005-2023 Toyota Tacoma 4×4 and Pre-Runner, and 1999-2006 Toyota Tundra
- Provides 1.5” of lift on stock weight rear end
- Lowers rear spring rate for smoother ride quality
- Uses high-quality progressive rate, lifetime guaranteed leaf springs
- Includes U-bolts and required hardware
- Installation is easy, using common socket wrench, torque wrench, and cut-off wheel
- Installation Guide
(7 reviews) -
Tundra 2nd Gen (2007-2021)FREE SHIPPING
within 48 US StatesTax Return Sale, 5% off
Use Coupon TAXTIMEExpedition Truck Cap with Full Wing Doors | Tundra 2007-2021 5.5FT Bed
- Specifically suits 2007-2021 Toyota Tundra Trucks with the 5.5FT Bed length
- No Drill Installation: Say goodbye to complex installations. Our no-drill installation process is hassle-free and preserves your truck’s integrity. You can have your topper ready for action in no time.
- Marine-Grade Stainless Construction: Engineered to withstand the harshest conditions, our topper is built to last. Crafted from marine-grade stainless steel, it ensures longevity and corrosion resistance, ready to tackle any terrain.
- Textured Powder Coat Finish: The tough, textured powder coat finish not only adds a striking aesthetic but also provides extra protection against the elements, making your topper look great season after season.
- True Fit Technology: Say goodbye to the hassle of ill-fitting toppers. Our True Fit Technology ensures a seamless and secure fit, giving your truck a sleek, integrated appearance.
- Built-In Air Vent: Stay comfortable on the go with our integrated air vent. It ensures proper ventilation inside the topper, keeping your gear and equipment in optimal condition.
- Waterproof Seals: Rain or shine, your cargo stays dry. Our topper features waterproof seals that create an impenetrable barrier against moisture, so you can venture into the unknown with confidence.
- Heavy-Duty Latches: Robust and dependable, our heavy-duty latches keep your topper securely closed, providing peace of mind whether you’re on or off the beaten path.
- Solid Hinges: Designed for longevity and strength, our solid hinges allow for smooth and reliable opening and closing of the topper, even after years of use.
- Tempered Glass: Safety is paramount. Our topper comes with Tempered glass, ensuring clear visibility and compliance with all safety standards.
- 3rd Brake Light: Added safety features for your peace of mind. The integrated third brake light enhances visibility, keeping you and those around you safe.
- High-Pressure Struts: Our topper boasts high-pressure struts, making it easy to access your gear while providing consistent and reliable support.
- Modular Construction: Customize your topper to fit your needs. Our modular construction allows you to add or remove components easily, adapting to various adventures.
- Lifetime Warranty: We stand behind our product’s quality. Enjoy peace of mind with a lifetime warranty, ensuring your topper will be by your side for all your future journeys.
- Roof Rails and Crossbars: Take your adventures to the next level with our built-in roof rails and optional crossbars. They provide ample space to carry additional gear, bikes, kayaks, and more, allowing you to maximize your outdoor experiences.
- Dry Weight: 252 LBS
- Dynamic Weight Capacity: 325 LBS
- Static Weight Capacity: 750 LBS
- Measurements: 75 x 54 x 28″
- Ships from the fulfillment warehouse on a pallet by LTL Freight, the freight line will be in touch with you to setup a delivery appointment
- We strongly recommend you keep the shipping insurance on your order during checkout, in case of any damage in transit, it will be covered
(3 reviews) -
Tundra 3rd Gen (2022-2025+)FREE SHIPPING
within 48 US StatesDobinsons IMS59-60885 2.6″ IFP Rear Shocks Pair | Long Travel
- Suits 2022-2025+ Toyota Tundra Rear with 1.0-3.0″ of Lift – Long Travel
- These long travel rear shocks require extended sway bar links, extended brake lines, and 1.5″ bump stop extensions or longer bump stops
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
(18 reviews) -
Sale!Tundra 2nd Gen (2007-2021)
RCI Tundra Fuel Tank Skid Plate | 2007-2021 Tundra
- Suits 2nd Gen Tundra (2007-2021)
- 26 gallon skid is NOT compatible with 8 foot bed models
- Protects the vulnerable fuel tank from accidental puncture
- Compatible with nearly all 4×4 trucks from 2007-2021 (26 gallon skid is NOT compatible with 8 foot bed models).
- Requires Toyota rear fuel tank support strap from off-road model to bolt on skid plate
- Same mounting locations as factory skid plate but substantially sturdier metal construction
- Smooth, flat surface that easily slides over obstacles. No exposed bolt heads on skid plates on 26gal fuel skid plate
- 38gal fuel tank skid plate now incorporates welded bolt protection rings standard
- Direct bolt on addition, no drilling
- Includes heavy duty black powder coating for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Made in the USA.
(4 reviews) -
Performance Upgrades - Tundra 2022+FREE SHIPPING
within 48 US StatesPowerbrake X-Line Front Toyota Tundra Big Brake Kit for 2022-2025+
2022-2025+ Toyota Tundra Big Brake Kit Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 14.6″ x 1.34″ 56-vane discs
- 56 Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- REQUIRES 18″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
- Link to the rear brake upgrade option
(8 reviews)$3,250.00 Select options This product has multiple variants. The options may be chosen on the product page -
BrakesFREE SHIPPING
within 48 US StatesPowerbrake X-Line Front Toyota Tundra Big Brake Kit for 2007-2014
2007-2014 Toyota Tundra Big Brake Kit Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 14.6″ x 1.34″ 56-vane discs
- 56 Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- Suits 2007-2014 models with M12 caliper mounting bracket bolts
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- REQUIRES 18″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
- Check out the rear brake upgrade also
(8 reviews) -
Full Suspension Kits - Tundra 1st GenFREE SHIPPING
within 48 US StatesDobinsons 2-2.5″ 3-Way Adjustable MRA Lift Kit | Tundra 2000-2006
- Suits 2000-2006 Toyota Tundra 4×4 with V8 Engine
- Adjustable height front struts, lift from 2″ to 2.5″
- Choose from no added rear lift, a Quick Ride block kit or Add-A-Leaf (AAL) Kit
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Universal Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front MRA Struts, 2 Rear MRA Shocks, 2 Front Coil Springs (a pair), and multiple Rear Lift Options
- It’s recommended that these coilovers to be run with a diff drop kit and aftermarket UCA’s for coilover clearance and correct travel and alignment
- The included droop spacer goes on top of the strut, under the first washer, if lifting more than 2.0″ (see attached photo)
(11 reviews) -
Full Suspension Kits - Tundra 2nd GenFREE SHIPPING
within 48 US StatesDobinsons 3-Way Adjustable Tundra 2.0″-3.0″ MRA Suspension Kit | 2007-2021
- Suits Toyota Tundra 2007-2021 Models with 5.7L V8 Gas Engine
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment
- Coils are teal. Struts and shocks are black
- Front MRA Coilovers are assembled at the standard coil seat height
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg, EDP Surface Protection
- Requires lower mount clearancing to fit the larger lower leg of the new coilover (see attached photo)
- See attached photo for correct hose routing
- CNC TIG Precision Welded Body End Mounts
- Includes Reservoir Brackets and Hardware and Sticker Pack
- Full 2 year limited warranty, no set rebuild time period, fully rebuildable shocks
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Choose your desired suspension parts to build the kit best suited to your weight
- Multiple lift height and load ratings available
- Front coilover assembly instructions
- New UCA’s are required for proper coilover and hose clearance, see all options
- Aftermarket wheels with +18 Offset or less REQUIRED to avoid reservoir + hose rubbing at full lock
(12 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons Tundra IMS 2.25″-3.0″ Quick Ride Kit or AAL for 2007-2021 4×4 V8
- Suits 2007-2021 Toyota Tundra 4×4 V8 Dual Cabs
- Complete Quick Ride or AAL suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- In the back, you can either lift your truck with the Dobinsons Quick Ride (block and U-bolt) Kit or the Wheeler’s Add-a-leaf Kit
- Coils are specifically suited to provide comfort and lift
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Choose your desired suspension parts to build the kit best suited to your weight
- Affordable suspension system without requiring new rear leaf packs
- Clip height adjustable front struts, massive 2.6″ size body front and rear with 60mm pisons, IFP (Internal Floating Piston) technology
- 4 Clip height settings. Lowest height is stock/OE height. Each clip height adds approximately 1/2″ of lift. Use clip heights to fine tune lift height or offset for vehicle lean
- FRONT ASSEMBLY INSTRUCTIONS
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- Full 2 year limited warranty, no set rebuild time period
(7 reviews) -
Dobinsons
Dobinsons Add-A-Leaf Center Bolt Pin (Single) (10-90)
- Used in place of original leaf bolt when adding a leaf
- Fits Fits L59-121-R R3 ONLY for 2008+ Tundra
- Sold individually
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Requires lifted leaf springs to ensure proper fitment
(4 reviews) -
Dobinsons
Dobinsons Tundra Add-A-Leaf Kit for L59-120-R Leaf Pack (2 leafs + 2 pins)
- Suits 2007-2021 Toyota Tundra
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Converts L59-120-R to L59-121-R
- Adds 100KG (220LB) constant load rating to existing springs
- Includes 2 single leafs and 2 longer center pins
(6 reviews) -
Accessories
Dobinsons Pickup Rear Drawers Kit with Fridge Slide 39x51x10″
- 1.6mm Zinc Plated Robust Steel Construction
- 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
- Built in Heavy Duty Fridge Slide
- 8 x Heavy Duty Stainless Steel Tie Down Points
- Requires tonneau cover or canopy
- Universal Mount, measures 51.1 x 39.4 x 10 inches (L, W, H), requires drilling of truck bed, and custom fitting of side panels (if ordered)
- You can add a universal side wing panel kit down below, so that you can build out the edges of the drawers to the side of your bed
- Aluminum Edging Protection
- Heavy duty lockable latches
- Marine Carpet
- Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
- Ships to the nearest freight terminal for pickup, unless home delivery is option is added below. We will be in touch to let you know the terminal location
- Optional Universal Side Wing Panel kit
- Optional Drawer Dividers
(12 reviews) -
Sale!SuspensionOn Sale All April !!!
Icon 55156 Diff Drop Kit | 22+ Tundra, 23+ Sequoia, 24+ GX550
- Suits 2022-2025+ Toyota Tundra, 2023-2025+ Toyota Sequoia and 2024+ Lexus GX550
- Keeps CV angles at a good working angle when lifted
- Reduces CV bind at full droop, especially when used with extended travel struts or coilovers
- Drops front differential to provide better maximum operating angle for CV joints
- CNC laser cut, precision brake-formed steel bracketry with durable black powder coat finish
- Polyurethane bushings limit deflection and prevent differential movement under load
- 100% Bolt-on with no cutting or welding necessary for installation
- Installation Guide
(8 reviews) -
Airbag Kits
Air Lift Universal Airbag Cradle Kit Tacoma and Tundra
- Enjoy full suspension travel and the benefits of air bags with the Air Lift Air Bag Cradle Kit
- Fits most full-size trucks and SUVs running 6” diameter bellow-type rear air bags
- Mounts to your truck’s lower air bag suspension mounting bracket—Installation Instructions (PDF)
- Allows full factory differential drop without fear of bag damage
- Perfect for air bag suspension kits such as the Firestone Ride-Rite or Air Lift LoadLifter 5000
- Provides room for air bags to safely cycle with no loss of wheel travel
- Crafted from super-tough polyurethane
- Kit includes two cradles and mounting hardware
- Proudly built in the USA
- Cradle mounts to top of leaf spring, airbag mounts to frame above only
(10 reviews) -
Tundra 3rd Gen (2022-2025+)FREE SHIPPING
within 48 US StatesDobinsons MRA59-A885 2.6″ 3-Way Adjustable Rear Shocks Pair | Long Travel
- Suits 2022-2025+ Toyota Tundra Rear with 3.0″ of Lift in a long travel setup
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 22mm / 7/8″ shaft diameter
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- 714mm extended, 440mm compressed
- Installation Instructions of the MRA Shocks
(0 reviews) -
Sale!Overland Vehicle Systems (OVS)FREE SHIPPING
within 48 US StatesTax Return Sale, 5% off
Use Coupon TAXTIMELD TACT Truck Bed Tent – Full Size Truck 5.5FT Bed
- For Full Size Truck Beds measuring 5.5-5.8 FT in length
- For Vehicles such as Chevy Silverado, Dodge Ram, Ford F150 F250 F350, GMC Sierra, Nissan Titan, Toyota Tundra
- 2-3 Person Design with Spacious Interior and Headroom
- Perimeter Skirt and Reinforced Floor Keeps Truck Bed Dry
- Color Coated Poles for Quick Deployment
- Large Windows with Mesh Allows for Ventilation
- Premium 420D Material with Removable Rainfly
- Padded Elastic Anchor Points for Easy Scratch-Free Fit
- Compact Carrying Bag is Included
- Internal Storage Options
- Setup Instructions
- This truck bed tent style is made in 2 sizes, 5FT for Mid-Size and 5.5FT for Full Size
(3 reviews) -
Skid Plates, Sliders, Bumpers, Racks - Tundra 2nd GenFREE SHIPPING
within 48 US StatesApex 2007-2021 Toyota Tundra CrewMax Rock Sliders
- Suits 2007-2021 Toyota Tundra CrewMax, not suitable for a regular double cab
- All Pro Offroad APEX Tundra Rock Sliders have been trail tested on some of the most grueling trails around, from the Rubicon to the Hammers
- They are built from heavy-duty .120″ wall tubing
- The shape of our Tundra Rock Sliders is very critical and determines how much body protection it will provide as well as how the truck slides along the obstacles without getting hung up
- The outer tubes of the Tundra Rock Sliders are 1.75″ diameter, and angle upward to provide maximum ground clearance and door protection
- All-Pro Rock Tundra Rock Sliders not only look great but can be used as a lift point, easily holding the full weight of the vehicle.
- Made from hefty 1.75” x .120 wall DOM steel tubing with 1.75” round legs that are fully gusseted
- Also included is a one-piece CNC laser cut .125″ steel fill plate with dimple die holes and the APEX logo on the kick-out portion
- These are available in bare steel only. They get too damaged if powder coated then shipped due to their length and how the freight companies handle them
- MADE IN THE USA
- INSTALLATION INSTRUCTIONS
(7 reviews) -
Sale!Tundra 3rd Gen (2022-2025+)
RCI Engine Skid Plate | Tundra 2022+ & Sequoia 2023+
- Suits 2022 Tundra (2022-2025+) 4×4 Models Only (not for 2WD) and 2023-2025+ Toyota Sequoia 4×4
- Choose from 10 gauge steel or 1/4″ 5052 Aluminum
- Some photos show additional transmission skid plate installed as well (sold separately)
- Protects power steering unit, front differential, front cross-member, engine, engine bay, and radiator
- Mounts to radiator cross-member without interfering with aftermarket bumpers, hidden winch, etc.
- Excellent replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Easy access to oil filter by removal of access door using only two bolts
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat standard on steel skid plates for a rust resistant, durable and high quality finish
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Weights: Steel = 45lbs. Aluminum = 30lbs
- Made to order
- Not compatible with 4″+ drop bracket lift kits (does work with all 1-3″ coilover lifts)
- Made in the USA.
(5 reviews) -
BrakesFREE SHIPPING
within 48 US StatesPowerbrake X-Line Front Toyota Tundra Big Brake Kit for 2015-2021
2015-2021 Toyota Tundra Big Brake Kit Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 14.6″ x 1.34″ 56-vane discs
- 56 Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- Suits 2015-2021 models with M14 caliper mounting bracket bolts
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- REQUIRES 18″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
- Check out the rear brake upgrade also
(5 reviews) -
Airbag KitsFREE SHIPPING
within 48 US StatesToyota Tundra Firestone 2445 Airbag Kit 2007-21 Tundra
- Suits Toyota Tundra 2007-2021 with factory height leaf springs and shocks
- System Type: Leaf Spring Mount
- Load Capacity: 5,000 lbs per pair
- Bag/Spring Type: Double Convoluted
- Installation Type: Bolt On, No Drilling Required
- Inflation Method: Manual Inflation
- Min Air Pressure: 5 PSI, Max Air Pressure: 100 PSI
- Firestone Installation Instructions: Installation Instructions
- We also sell a Firestone air compressor and gauge kit to fill this up from inside the vehicle
(5 reviews) -
Performance Upgrades - Tundra 2nd GenFREE SHIPPING
within 48 US StatesPowerbrake D-Line HP Rotor and Pad Kit | Tundra 07-21 Front
- Suits Toyota Tundra 2007-2021 Front
- Also offered for the REAR
- Powerbrake D-Line Features
- Rotors are cast from a proprietary high carbon cast-iron alloy.
- Rotors are machined to tolerances up to three times tighter than the industry norm.
- All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
- Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
- Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
- Matched high friction PB05 brake pads take the guesswork out of pad selection.
- Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
- Powerbrake D-Line Benefits at a Glance
- Reduced stopping distances in both wet and dry conditions.
- Reduced brake fade and improved brake consistency.
- Improved initial brake response (bite).
- Improved brake modulation particularly during emergency stops.
- Improved resistance to rotor distortion (warping) and cracking at high temperatures.
- What’s Included in Powerbrake D-Line?
- 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
- An axle set of matched PB05 high-performance brake pads – Made in Japan.
- Fits as per a standard rotor and pad change, using the vehicle’s original calipers.
(4 reviews)
