You may be interested in…

• 

  On Backorder

  Expedition 2008-2017 119in Wheelbase

  Dobinsons C19-430 1.75″ Lift Front Coils | Ford Expedition 2008-2017

  • 1.75″ front lift coils for a Ford Expedition 119″ wheelbase from 2008-2017 with stock weight
  • Fully Designed, Manufactured, and Finished In Australia
  • Ultra modern design technology, Fully Scragged & Load Tested
  • State of the Art Heat Treatment, High Intensity Shot Peened
  • Formed on Precision Mandrels, Precise End Configurations
  • Durable Powder Coat Finish
  • Sold as a Pair
  • This product is a special order from Australia, and that can easily take 4-6 months to get. Confirm below that you understand that the order can’t be cancelled once placed

  $405.00 Select options
• 

  • 
  • 

  Timbren

  Ships FREE !!
  within 48 US States

  Timbren ABSTORSEQ Active Off Road Rear Bump Stops | Toyota and Lexus SUV’s

  • Maintain Full Axle Travel
  • Smooth Axle Engagement and Disengagement
  • Enhance Suspension Performance
  • Progressive Spring Rate
  • Absorbs Energy and Cushions Road Shocks
  • Stronger Than OEM Bumpstops
  • Easy Installation
  • Satisfaction Guarantee
  • Lifetime Warranty
  • Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser, Lexus GX470 and GX460, Landcruiser 100 Series

  • Specs:

    • 2,000 lb capacity
    • 4,800 lb bump load capacity
    • Overall kit height = 5”
    • Total deflected (compressed) height = 2.75”
    • Amount of deflection (compression) = 2.25”
  • Click here for instructions
  • Installation video from Exit Offroad
  • Depending on the overall travel of the suspension you’re running, bump stop extensions may be necessary to prevent shock bottom-outs.  Timbren make 2 options, they do not include any longer bolts which may be required
    • A25722-90F00 (1/2″ spacer)
    • A25723-90AD00 (1″ spacer)

  $269.36 Add to cart
• 

  Upper Control Arms

  Pair of UCA Pivot Bolts and Nuts | Toyota and Lexus

  • This is a pair of factory size upper control arm pivot bolts and nuts replacements to service two control arms
  • Commonly referred to “as the long UCA bolt”
  • Services both control arms at once
  • Does not come with any washers.  New aftermarket UCA’s usually come with the necessary washers
  • Vehicle Fitment
  • • 2003-2009 Toyota 4Runner
    • 2010-2024 Toyota 4Runner
    • 2005-2015 Toyota Tacoma
    • 2016-2023 Toyota Tacoma
    • 2006+ FJ Cruiser (all years)
    • 2003-2009 Lexus GX470
    • 2010-2023 Lexus GX460
    • Toyota Hilux Vigo
    • Toyota Hilux Revo
    • Toyota Fortuner
    • Toyota Prado 120
    • Toyota Prado 150
  • Bolt Grade: 10.9
  • Head Drive Type: Hex
  • Length: 351 mm
  • Material: Steel
  • SAE or Metric: Metric
  • Thread Diameter: 14 mm
  • Thread Length: 28.7 mm
  • Thread Size: 14 mm
  • Thread Type: Fine

  $69.00 Add to cart
• 

  • 
  • 
  • 

  Steering Upgrades

  Ships FREE !!
  within 48 US States

  Rusty’s HD Aluminum Tie Rod Assembly | JL Wrangler + JT Gladiator

  • Fits: 2018-Current Jeep JL Wrangler and 2020-Current Jeep JT Gladiator Models
  • A tie rod is the steering component that connects one wheel to the other, and you adjust toe with this
  • Massive 1.825″ 7075 SOLID Aluminum Tie Rod
  • Adjustable forged ends are threaded for adjustment without removing the tie rod from the vehicle
  • HD jam nuts
  • Serrated Lock Washers
  • The strongest JL/JT Tie Rod you can buy
  • Complete assembly from one side to the other, nothing else needed
  • INSTALLATION INSTRUCTIONS
  • Built in Rainbow City, Alabama, USA
  • Also made in a steel DOM version

  $502.00 Select options
• 

  • 
  • 
  • 

  MRA Remote Resi 3-Way Adjustable Monotube

  Ships FREE !!
  within 48 US States

  Dobinsons MRA59-A701 3-Way Adjustable MRA Shocks

  • Suits 2003-2024 4Runner (4th and 5th Gen), All FJ Cruisers, Lexus GX470 and GX460, Toyota Prado 120 & 150, suitable for 0 – 3″ of lift
  • 3-way adjustable valving – adjust high and low speed compression and rebound
  • Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 50mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • Direct Bolt-On Shock Design
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period
  • 609mm extended, 389mm compressed
  • SOLD IN PAIRS
  • Now comes with a longer hose and different mounting instructions

  $1,150.00 Add to cart
• 

  • 
  • 
  • 

  Upper Control Arms

  Ships FREE !!
  within 48 US States

  Dobinsons Billet Aluminum Adjustable UCA’s | 4Runner FJ Cruiser GX470 GX460

  • Super strong billet aluminum front upper control arms (UCA’s) for Toyota and Lexus SUV’s
  • Suits 2003-2009 4Runner, 2010-2024 4Runner, FJ Cruiser (all years), Lexus GX470 and Lexus GX460
  • Complete kit for both left and right hand side
  • High clearance design to clear pretty much every coilover size available
  • OE-style sealed ball joints for a maintenance free life
  • OE-style high quality rubber bushings for maximum NVH dampening and longevity
  • No greasing or maintenance required at all, completely noise-free operation
  • Adjustable on-vehicle for quick and easy alignment.
  • Adjustable Camber and Caster for perfecting the vehicle’s handling
  • Adds 2 or 3 degrees of added caster, and caster can be further adjusted
  • O-ring sealed ball joint cap for protection against the elements
  • Works for any lift height of 1.5″ or more
  • Installation Instructions
  • Video on YouTube showing features and Installation
  • We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer

  $1,195.00 Add to cart
• 

  • 
  • 
  • 

  Suspension

  Ships FREE !!
  within 48 US States

  Dobinsons MRA59-A684 3-Way Adjustable MRA Front Shocks | 80 Series 6″ Lift

  • Suits Toyota Land Cruiser 80 Series 1990-97, suitable for 6″ of lift
  • 3-way adjustable valving – Adjust high and low speed compression and rebound
  • Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
  • 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
  • 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
  • 20 Stage Low Speed Compression – For creepy crawling and cornering
  • 15 Stage Rebound – Control your coils, prevent bucking
  • 60mm CNC Machined High Flow Billet Aluminum Race Piston
  • 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
  • Upgraded 3 Stage FKM‐HNBR Sealing System
  • TSUGAMI™ CNC machined components for precise tolerances
  • Parker™ Braided High Pressure Hoses
  • 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
  • T6 6061 Height Adjustable Spring Seat
  • Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
  • 60mm Full 6063 aluminum remote reservoir
  • Lightweight CNC Machined Low Friction floating piston
  • High Quality O.E.M. Grade Natural Rubber Bushings
  • Single Piece Lower Leg
  • EDP Surface Protection
  • CNC TIG Precision Welded Body End Mounts
  • Fully Rebuildable Design
  • SOLD IN PAIRS
  • Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
  • Installation Instructions of the MRA Shocks
  • 728mm extended, 432mm compressed
  • Full 2 year limited warranty, no set rebuild time period

  $1,350.00 Add to cart
• Sale!

  

  • 
  • 
  • 

  Skid Plates

  On Sale For Memorial Day!!

  Rear Shock Mount Skids | 2010-2024 4Runner FJ Cruiser GX460

  • Includes one pair of rear shock mount skid plates (Driver/Passenger)
  • Protects low hanging shock mounts on all 2010-2024 4Runner, FJ Cruiser and Lexus GX460 models
  • Includes all hardware for installation
  • Product includes a heavy duty black powder coat finish
  • Made in USA

  $113.99 Original price was: $113.99.$103.00Current price is: $103.00. Add to cart
• 

  New Item

  • 
  • 
  • 

  Shocks - 80 Series Land Cruiser

  Ships FREE !!
  within 48 US States

  Dobinsons IMS59-60681 Rear IMS 2.6″ Shocks | 80 Series – 31″ Extended

  • 31″ long 2.6″ body shocks for the rear of a Toyota Land Cruiser 80 Series
  • For custom use, extreme rear long travel shocks, longer than the Dobinsons 6″ lift shocks
  • Fully rebuildable and re-valvable
  • SOLD IN PAIRS
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
  • Full 2 year limited warranty, no set rebuild time period
  • 790mm (31.1″) extended, 480mm (18.9″) compressed
  • Bump stop extensions are required to prevent bottom outs, depending how you mount the shocks
  • Photo for illustration purposes

  $650.00 Add to cart
• 

  • 
  • 
  • 

  Exceptions

  Dobinsons Rear Dual Roller Drawer Kit – 36 x 40 x 10 inches

  • 1.6mm Zinc Plated Robust Steel Construction
  • 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
  • Built in Heavy Duty Fridge Slide on left side
  • 8 x Heavy Duty Stainless Steel Tie Down Points
  • Universal Mount, measures 36″ Long x 40″ Wide x 10″ High, requires drilling
  • Aluminum Edging Protection
  • Heavy duty lockable latches
  • Marine Carpet
  • Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
  • Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected.  We will be in touch with that delivery address

  $1,465.00 Select options
• 

  • 
  • 
  • 

  Excluded

  Dobinsons Pickup Rear Drawers Kit with Fridge Slide Universal Fit

  • 1.6mm Zinc Plated Robust Steel Construction
  • 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
  • Built in Heavy Duty Fridge Slide
  • 8 x Heavy Duty Stainless Steel Tie Down Points
  • Requires tonneau cover or canopy
  • Universal Mount, measures 51.1 x 39.4 x 10 inches (L, W, H), requires drilling of truck bed, and custom fitting of side panels (if ordered)
  • You can add a universal side wing panel kit down below, so that you can build out the edges of the drawers to the side of your bed
  • Aluminum Edging Protection
  • Heavy duty lockable latches
  • Marine Carpet
  • Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
  • Ships to the nearest freight terminal for pickup, unless home delivery is option is added below.  We will be in touch to let you know the terminal location

  From $1,845.00 Select options
• 

  • 
  • 
  • 

  Accessories

  Dobinsons Single Drawer – Universal Mount – Medium Size

  • Measures 900mm long x 500mm wide x 275mm high, 75 LBS dry weight
  • 1.6mm Zinc Plated Robust Steel Construction
  • 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
  • 4 x Heavy Duty Stainless Steel Tie Down Points
  • Aluminum Edging Protection, Heavy duty lockable latch 
  • Not compatible with 3rd row seat installed.
  • Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
  • Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected.  We will be in touch with that delivery address.  Ground shipping isn’t available due to potential product damage

  $800.00 Select options
• Sale!

  

  • 
  • 
  • 

  Wheels

  Ships FREE !!
  within 48 US States

  Warn 106687 Diamond Cutter Wheel – 17×8.5″ 5×5 0″ Offset – Black

  • Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
  • 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 5 lugs, Uses OEM Jeep lug nuts
  • Sold Individually
  • Black Finish
  • 1 Piece Cast Aluminum Construction
  • Compatible With TPMS (Tire Pressure Monitoring System)
  • With Warn Logo Center Cap
  • Limited Lifetime Structural Warranty
  • When Installing On A 2020+ Jeep Wrangler The OEM TPMS Sensor Can Be Used But Must Be Turned In The “UP” Position And It Will Not Lay Flat Against The Wheel
  • Bolt Pattern Inch: 5×5.00
  • Bolt Pattern Millimeter: Not Applicable
  • Diameter: 17
  • Width: 8.5
  • Offset: 0
  • Backspacing: 4.75
  • Material: Aluminum
  • Finish: Painted
  • Color: Black
  • Bolt Pattern Inch: 5×5.00
  • Bolt Pattern Inch: Not Applicable
  • Bolt Pattern Millimeter: 5×127
  • Bolt Pattern Millimeter: Not Applicable
  • Lug Nut Seat Type: 60 Degree Conical
  • Center Cap: See Replacement Items
  • Center Bore: 71.50
  • Lug Nut Design: Acorn
  • Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
  • Basic Design: 5 Spoke
  • With Inserts: No
  • Load Capacity: 2100
  • Size: 17×8.5
  • Max Tire Diameter: 40
  • Center Cap Design: Warn Logo
  • Structural Warranty: Lifetime
  • Quantity: Single
  • Construction: One Piece Cast
  • With Hub Centric Ring: No
  • Estimated Install Time (Hours): 0.5
  • Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
  • This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.

  $352.93 Original price was: $352.93.$299.99Current price is: $299.99. Add to cart
• 

  Brake Lines

  Extended Rear Brake Lines +4″ for Toyota Tacoma 2005-2023 (Black)

  • American made D.O.T. Certified extruded teflon core, stainless steel braided and coated with a PVC cover
  • 4″ longer than stock for long travel suspension lifts
  • Suits the following vehicles: Toyota Tacoma 2005-2015, Toyota Tacoma 2016+
  • Can be used with any lift height, however these are extra long for long travel rear shocks
  • Sold as a pair with new retaining clips
  • This set is BLACK in color

  $95.00 Add to cart
• 

  • 
  • 
  • 

  Steering Upgrades

  Ships FREE !!
  within 48 US States

  Rusty’s HD Tie Rod Assembly | JL Wrangler + JT Gladiator

  • Fits: 2018-Current Jeep JL Wrangler and 2020-Current Jeep JT Gladiator Models
  • A tie rod is the steering component that connects one wheel to the other, and you adjust toe with this
  • Massive 1.75″ x 0.250-wall DOM tubing Tie Rod bar
  • Adjustable forged ends are threaded for adjustment without removing the tie rod from the vehicle
  • HD jam nuts
  • Serrated Lock Washers
  • The strongest JL/JT Tie Rod you can buy
  • Complete assembly from one side to the other, nothing else needed
  • INSTALLATION INSTRUCTIONS
  • Built in Rainbow City, Alabama, USA
  • Also made in an Aluminum version

  $427.00 Select options
• 

  • 
  • 

  Wheelers Off Road

  Wheeler’s Rear Leaf U-Bolt Flip Kit for 2005-2023 Tacoma with Superbump Bump Stops

  • Designed for Rear Leaf Springs Only, 2005-current Toyota Tacoma 4×4 and Prerunner
  • Provides increased ground clearance under the axle by flipping the u-bolts upwards
  • U-bolt mounting Plates are Clear Zinc-Coated and 3/8″ Thick
  • Threaded Holes are 3/8″-16 with a 4″ Spread
  • Includes (4) Zinc-Coated 1/2″ Grade 5 U-bolts (8.75″ Long) with Zinc-Coated Hardware
  • Includes SuperBump Micro-Cellular Polyurethane Progressive Bump Stop Set
  • Installation Instructions

  $312.00 Add to cart
• 

  • 
  • 
  • 

  Performance Upgrade - 5th Gen 4Runner

  Ships FREE !!
  within 48 US States

  10% Off For Memorial Day!!
  Use coupon code MEMORIALDAY

  Powerbrake D-Line HP Rotor and Pad Kit | 4Runner 10-24 Rear

  • Suits Toyota 4Runner 5th Gen 2010-2024 Rear
  • Also available for the FRONT
  • Powerbrake D-Line Features
    • Rotors are cast from a proprietary high carbon cast-iron alloy.
    • Rotors are machined to tolerances up to three times tighter than the industry norm.
    • All Powerbrake rotors feature our MTR (Max Temperature Recording) system.
    • Proprietary black disc surface coating ensures quicker bed-in and max brake performance.
    • Spiral slots on the rotor fiction surface clear friction gasses, debris and water.
    • Matched high friction PB05 brake pads take the guesswork out of pad selection.
    • Pad compound PB05 is manufactured in Japan and has been specifically formulated for use on 4×4 vehicles
  • Powerbrake D-Line Benefits at a Glance
    • Reduced stopping distances in both wet and dry conditions.
    • Reduced brake fade and improved brake consistency.
    • Improved initial brake response (bite).
    • Improved brake modulation particularly during emergency stops.
    • Improved resistance to rotor distortion (warping) and cracking at high temperatures.
  • What’s Included in Powerbrake D-Line?
    • 2 x Standard OEM diameter high performance slotted rotors for your 4WD or truck – Made in South Africa.
    • An axle set of matched PB05 high-performance brake pads – Made in Japan.
    • Fits as per a standard rotor and pad change, using the vehicle’s original calipers.

  $840.00 Add to cart
• 

  • 
  • 
  • 

  Excluded

  Dobinsons Single Drawer – Universal Mount – Large Size

  • Measures 990mm long x 535mm wide x 275mm high, 80 LBS dry weight
  • 1.6mm Zinc Plated Robust Steel Construction
  • 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
  • 4 x Heavy Duty Stainless Steel Tie Down Points
  • Aluminum Edging Protection, Heavy duty lockable latch 
  • Not compatible with 3rd row seat installed.
  • Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
  • Add optional Dobinsons Rear Drawer Table Top for better useability of the drawer
  • Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected.  We will be in touch with that delivery address
  • Regular Ground shipping isn’t available due to potential product damage

  $800.00 Select options
• 

  • 
  • 
  • 

  Steering Upgrades

  Ships FREE !!
  within 48 US States

  Rusty’s Front Track Bar Mount Brace | JL Wrangler + JT Gladiator

  • Fits: 2018-Current Jeep JL Wrangler and 2020-Current Jeep JT Gladiator Models
  • This is a brace that supports the mount between the steering box and the track bar bracket
  • Constructed of 1/4-inch thick laser-cut steel
  • CNC formed for an exact fit
  • E-coated in black for durability and looks
  • Includes Grade 8 hardware
  • INSTALLATION INSTRUCTIONS
  • Built in Rainbow City, Alabama, USA

  $146.00 Select options
• 

  SPC

  SPC 87520 – Nissan Frontier Xterra Alignment Cam Kit (2 Pairs)

  • Suits 2005+ and 2022+ Nissan Frontier and Nissan Xterra (2005-2015)
  • These cams are designed to install in the lower control arms for camber and caster adjustment
  • They replace the original non-adjustable lower control arm bolts
  • Front Adjustment range: Camber/Caster ±2.00°
  • Installation time: .3 hr/side
  • The purchase includes 2 pairs, enough for 1 vehicle
  • Installation Guide

  $90.00 Add to cart
• 

  On Backorder

  Expedition 2008-2017 119in Wheelbase

  Dobinsons C19-432 1.75″ Lift HD Front Coils | Ford Expedition 2008-2017

  • 1.75″ front lift coils for a Ford Expedition 119″ wheelbase from 2008-2017 with 160-220LBS of constant front end weight, like a bumper, winch, etc
  • Fully Designed, Manufactured, and Finished In Australia
  • Ultra modern design technology, Fully Scragged & Load Tested
  • State of the Art Heat Treatment, High Intensity Shot Peened
  • Formed on Precision Mandrels, Precise End Configurations
  • Durable Powder Coat Finish
  • Sold as a Pair
  • This product is a special order from Australia, and that can easily take 4-6 months to get. Confirm below that you understand that the order can’t be cancelled once placed

  $405.00 Select options
• 

  Brake Lines

  Extended Rear Brake Lines +4″ for Toyota Tacoma 2005-2023 (Red)

  • American made D.O.T. Certified extruded teflon core, stainless steel braided and coated with a PVC cover
  • 4″ longer than stock for long travel suspension lifts
  • Suits the following vehicles: Toyota Tacoma 2005-2015, Toyota Tacoma 2016+
  • Can be used with any lift height, however these are extra long for long travel rear shocks
  • Sold as a pair with new retaining clips

  $95.00 Add to cart
• 

  • 
  • 
  • 

  Dobinsons

  Dobinsons WA59-520K Rear Lower Control Arms Pair | 4Runner FJ Cruiser GX470 GX460

  • Suits 4th and 5th Gen 4Runner (2003-2024), FJ Cruiser (all years), GX470, GX460
  • Comes with highly flexible rubber bushings installed, and also high quality polyurethane bushings and sleeves included in case you prefer to run poly instead of rubber
  • Made from HSLA (High Strength Low Alloy) Steel, 5mm (0.2″) wall thickness, and powder coated black
  • Oversized adjusters and rod thickness for maximum strength and durability with double-nut locking feature
  • Zinc plated, then powder coated black, for the ultimate finish and protection

  $405.00 Add to cart
• Sale!

  

  • 
  • 
  • 

  Exceptions

  Ships FREE !!
  within 48 US States

  Warn 106688 Diamond Cutter Wheel – 17×8.5″ 5×5″ 0 Offset – Gun Metal

  • Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
  • 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 5 lugs, Uses OEM Jeep lug nuts
  • Sold Individually
  • Gun Metal Finish
  • 1 Piece Cast Aluminum Construction
  • Compatible With TPMS (Tire Pressure Monitoring System)
  • With Warn Logo Center Cap
  • Limited Lifetime Structural Warranty
  • When Installing On A 2020+ Jeep Wrangler The OEM TPMS Sensor Can Be Used But Must Be Turned In The “UP” Position And It Will Not Lay Flat Against The Wheel
  • Bolt Pattern Inch: 5×5.00
  • Bolt Pattern Millimeter: Not Applicable
  • Diameter: 17
  • Width: 8.5
  • Offset: 0
  • Backspacing: 4.75
  • Material: Aluminum
  • Finish: Painted
  • Color: Gun Metal
  • Bolt Pattern Inch: 5×5.00
  • Bolt Pattern Inch: Not Applicable
  • Bolt Pattern Millimeter: 5×127
  • Bolt Pattern Millimeter: Not Applicable
  • Lug Nut Seat Type: 60 Degree Conical
  • Center Cap: See Replacement Items
  • Center Bore: 71.50
  • Lug Nut Design: Acorn
  • Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
  • Basic Design: 5 Spoke
  • With Inserts: No
  • Load Capacity: 2100
  • Size: 17×8.5
  • Max Tire Diameter: 40
  • Center Cap Design: Warn Logo
  • Structural Warranty: Lifetime
  • Quantity: Single
  • Construction: One Piece Cast
  • With Hub Centric Ring: No
  • Estimated Install Time (Hours): 0.5
  • Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
  • This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.

  $352.93 Original price was: $352.93.$299.99Current price is: $299.99. Add to cart
• Sale!

  

  Wheels

  Ships FREE !!
  within 48 US States

  Warn 104490 Jack Hammer Wheel – 17×8.5″ 6×5.5″ 0 Offset – Gun Metal

  • Warn wheels made specifically for 6 Lug 2021+ Ford Bronco, 2019+ Ford Ranger, FJ Cruiser, 2005-2023 Toyota Tacoma, and 2003-2023 Toyota 4Runner, Lexus GX470 and GX460
  • 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 6 lugs, Uses OEM lug nuts
  • Sold Individually
  • Gun Metal Finish
  • 1 Piece Cast Aluminum Construction
  • Compatible With TPMS (Tire Pressure Monitoring System)
  • With Warn Logo Center Cap
  • Limited Lifetime Structural Warranty
  • Bolt Pattern Inch: Not Applicable
  • Bolt Pattern Millimeter: Not Applicable
  • Weight: 30 LBS
  • Diameter: 17
  • Width: 8.5
  • Offset: 0
  • Backspacing: 4.75
  • Material: Aluminum
  • Finish: Painted
  • Color: Gun Metal
  • Bolt Pattern Inch: 6×5.50
  • Bolt Pattern Inch: Not Applicable
  • Bolt Pattern Millimeter: 6×139.7
  • Bolt Pattern Millimeter: Not Applicable
  • Lug Nut Seat Type: 60 Degree Conical
  • Center Cap: See Replacement Items
  • Center Bore: 106.10
  • Lug Nut Design: Acorn
  • Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
  • Basic Design: Solid Center
  • With Inserts: No
  • Load Capacity: 2500
  • Size: 17×8.5
  • Max Tire Diameter: 40
  • Center Cap Design: Warn Logo
  • Structural Warranty: Lifetime
  • Quantity: Single
  • Construction: One Piece Cast
  • With Hub Centric Ring: Yes
  • Estimated Install Time (Hours): 0.5
  • Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
  • This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.

  $352.93 Original price was: $352.93.$299.99Current price is: $299.99. Add to cart
• 

  • 
  • 
  • 

  Suspension

  Ships FREE !!
  within 48 US States

  Dobinsons IMS59-60684 Front IMS Shocks | Land Cruiser 80 Series (6″ lift)

  • Fully rebuildable and re-valvable
  • SOLD IN PAIRS
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
  • Full 2 year limited warranty, no set rebuild time period
  • 728mm extended, 432mm compressed

  $650.00 Add to cart
• 

  • 
  • 
  • 

  Dobinsons

  Ships FREE !!
  within 48 US States

  Dobinsons IMS59-50941 Long Travel Rear IMS Shocks for 2005-23 Tacoma

  • Longer travel rear shocks for maximum down travel with a bolt-on shock
  • SOLD IN PAIRS
  • Fully rebuildable and re-valvable
  • Zero shock fade in all terrains with full load
  • Direct, bolt-on replacement for easy fitment
  • IFP – Internal Floating Piston, separates oil and nitrogen
  • Corrosion resistant (EDP Surface Protection)
  • Heavy duty single piece lower leg
  • Enormous oil capacity
  • Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
  • Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
  • 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
  • Specifications 16.5″ compressed length, 26.9″ extended length
  • These shocks require extended brake lines and extended bump stops
  • Full 2 year limited warranty, no set rebuild time period

  $580.00 Add to cart
• 

  • 
  • 
  • 

  Rear Drawers

  Dobinsons Rear Dual Roller Drawer Kit – 39 x 42 x 10 inches

  • 1.6mm Zinc Plated Robust Steel Construction
  • 12mm Heavy Duty Plywood Panels with Marine Carpet Covering
  • Built in Heavy Duty Fridge Slide
  • 8 x Heavy Duty Stainless Steel Tie Down Points
  • Universal Mount, measures 39 x 42 x 10 inches (L, W, H)
  • Aluminum Edging Protection
  • Heavy duty lockable latches
  • Marine Carpet
  • Massive 150KG (330LB) Drawer Capacity on Heavy Duty Roller Bearing System
  • Normally ships to the nearest freight terminal on a pallet for you to pick up, unless home delivery option is selected.  We will be in touch with that delivery address
  • Photos for illustration purposes and may not be actual size of product for this product page
  • Add optional Dobinsons Rear Drawer Table Top for better useability of the drawer

  $1,465.00 Select options
• 

  • 
  • 
  • 

  Upper Control Arms

  Ships FREE !!
  within 48 US States

  Dobinsons Billet Aluminum Adjustable UCA’s | Toyota Tacoma 2005-23

  • Super strong billet aluminum front upper control arms (UCA’s) for Toyota Trucks and SUV’s
  • Suits 2005-2023 Toyota Tacoma, 2005+ Toyota Hilux, 2005+ Toyota Fortuner
  • Complete kit for both left and right hand side
  • OE-style sealed ball joints for a maintenance free life
  • OE-style high quality rubber bushings for maximum NVH dampening and longevity
  • No greasing or maintenance required at all, completely noise-free operation
  • Adjustable on-vehicle for quick and easy alignment.
  • Adjustable Camber and Caster for perfecting the vehicle’s handling
  • O-ring sealed ball joint cap for protection against the elements
  • Works for any lift height of 1.5″ or more
  • Installation Instructions
  • We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer

  $1,195.00 Add to cart
• Sale!

  

  • 
  • 
  • 

  Exceptions

  Ships FREE !!
  within 48 US States

  Warn 106690 Jack Hammer Wheel – 17×8.5″ 5×5″ 0 Offset – Gun Metal

  • Warn wheels made specifically for Jeep Wrangler JL, JK, and Gladiator JT.
  • 17×8.5″ wheel with 0 Offset, 4.75″ backspacing, 5 lugs, Uses OEM Jeep lug nuts
  • Sold Individually
  • Gun Metal Finish
  • 1 Piece Cast Aluminum Construction
  • Compatible With TPMS (Tire Pressure Monitoring System)
  • With Warn Logo Center Cap
  • Limited Lifetime Structural Warranty
  • When Installing On A 2020+ Jeep Wrangler The OEM TPMS Sensor Can Be Used But Must Be Turned In The “UP” Position And It Will Not Lay Flat Against The Wheel
  • Bolt Pattern Inch: 5×5.00
  • Bolt Pattern Millimeter: Not Applicable
  • Diameter: 17
  • Width: 8.5
  • Offset: 0
  • Backspacing: 4.75
  • Material: Aluminum
  • Finish: Painted
  • Color: Gun Metal
  • Bolt Pattern Inch: 5×5.00
  • Bolt Pattern Inch: Not Applicable
  • Bolt Pattern Millimeter: 5×127
  • Bolt Pattern Millimeter: Not Applicable
  • Lug Nut Seat Type: 60 Degree Conical
  • Center Cap: See Replacement Items
  • Center Bore: 71.50
  • Lug Nut Design: Acorn
  • Compatible With TPMS (Tire Pressure Monitoring Sys: Yes
  • Basic Design: Solid Center
  • With Inserts: No
  • Load Capacity: 2100
  • Size: 17×8.5
  • Max Tire Diameter: 40
  • Center Cap Design: Warn Logo
  • Structural Warranty: Lifetime
  • Quantity: Single
  • Construction: One Piece Cast
  • With Hub Centric Ring: No
  • Estimated Install Time (Hours): 0.5
  • Prop 65 WARNING: This product can expose you to chemicals known to the State of California to cause cancer and/or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
  • This item is not returnable – any product damage must be reported to the shipping carrier within 48 hours of receipt.

  $352.93 Original price was: $352.93.$299.99Current price is: $299.99. Add to cart
• 

  • 
  • 
  • 

  Bronco 2021-2024+

  Ships FREE !!
  within 48 US States

  Fox Performance Elite Series 2.5″ Front Coilover Reservoir Pair Adjustable – 4DR Ford Bronco – 883-06-195

  • Suits: Front – Ford Bronco (fullsize) 2021+ 4-Door Models
  • Lift Height: 2-3″ with Sasquatch package, 3-4″ without Sasquatch package
  • Requires Aftermarket UCA’s for coilover clearance and articulation
  • Body: 2.5″ Impact extruded and CNC machined 6061-T6 hard anodized aluminum body resists rust over time
  • Body Plating: Hard-anodized for a durable finish
  • Reservoir: 2.5″ Smooth bore and honed seamless alloy reservoir
  • Components: Black-anodized, CNC-machined 6061-T6 billet aluminum
  • Spring Application: specific, custom progressive springs
  • Shaft: 7/8″ hard chrome plated steel shafts
  • Valving: Application specific valving to maximize performance
  • Seals: Redundant sealing pack system main seal, wiper seal, scraper seal
  • Bearing: PTFE-lined, heat-treated, alloy steel spherical
  • Adjustments: Ride height preload ring
  • Adjuster Type: DSC – Dual Speed Compression
  • Extended: 23.720″
  • Compressed: 17.940″
  • Travel: 5.780″
  • Top Mount: OEM
  • Bottom Mount: Bar Pin
  • Includes Reservoir Mounts
  • Exploded View Diagram »
  • Installation Guide »

  $2,399.95 Add to cart
• 

  • 
  • 
  • 

  Dobinsons

  Ships FREE !!
  within 48 US States

  Dobinsons 3-Way Adjustable Extended Travel Struts | Nissan Xterra Frontier Pathfinder R51

  • MRA Extended Travel front struts for 2-3″ of lift on Nissan Frontier D40 and D41, Nissan Navara D40 and D23, Nissan Xterra 05-15, Nissan Pathfinder R51
  • These extended travel struts REQUIRE aftermarket UCA’s for full travel
  • 3-way adjustable valving – adjust high and low speed compression and rebound
  • Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
  • External Remote Oil Reservoir with dual speed compression adjustment
  • Single Piece Lower Leg, Natural Rubber Bushings Top and Bottom
  • Triple Lip Oil Seal for Superior Lifespan
  • Direct Bolt-on, Fully Rebuildable Design
  • Pre-Charged with Nitrogen, Ready to be Assembled and Installed
  • EDP Surface Protection, 3mm Heavy Duty Wall Thickness
  • Includes Universal Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
  • Full 2 year limited warranty, no set rebuild time period
  • Does not include coil springs or top mounts – sold separately
  • Standard coil seat height should be set to 106mm from the center of the lower bushing eye to the bottom of the coil seat
  • Length specs – 278mm compressed and 410mm extended
  • FITTING INSTRUCTIONS
  • Instructions on setting coil seat height

  $1,280.00 Add to cart