Continue shopping “Dobinsons High Clearance Inner CV Boot Kit | Tacoma 4Runner FJ Cruiser GX470 GX460” has been added to your cart.
You may be interested in…
-
All Pro OffroadShips FREE !!
within 48 US StatesAll Pro Tacoma IFS Skid Plate – Bare Steel
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Covers from the front bumper down to the first cross member
- 3/16-inch steel – Bare Steel – needs to be painted before installation
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Installation Instructions
$380.00 Add to cart -
Skid Plates + Sliders - 5th Gen 4RunnerShips FREE !!
within 48 US StatesAll Pro 5th Gen 4Runner IFS Skid Plate – Black Coated Steel
- Suits 2010-2024 Toyota 4Runner 5th Gen
- Covers from the front bumper down to the first cross member
- 3/16-inch steel – Black Powder Coat
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install 5th Gen 4Runner skid plate
- Skidplate not currently compatible with a diff drop kit – you would have to space it down
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Compatible with All-Pro 2010+ 4Runner Front Bumpers
- Not tested with KDSS Vehicles
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Installation Instructions
$440.00 Add to cart -
Ranger 2019+ (US Spec)
Dobinsons Rear Greasable Poly Bush Kit | Ford Ranger 2019-2023
- Suits Ford Ranger 2019-2023
- For any lift height, or no lift. These are OE replacement bushings
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of rear leaf springs
- Photo for illustration purposes
$115.00 Add to cart -
Montero NM NP NS NT 2000+
Dobinsons SC43-008 Pair of Strut Top Plates for Mitsubishi Montero 2000+
- Suits Mitsubishi Montero NM NP NS NT 2000+ Wagons
- Designed to exact OE specs, using all new rubber bushes, washers and seats
- New zinc coated hardware for corrosion resistance
- Allows faster assembly of new components, not needing to disassemble used parts
- 2 Required per vehicle, sold as pairs
- Photo is for illustration purposes only
$120.00 Add to cart -
Skid Plates + Sliders - 5th Gen 4RunnerShips FREE !!
within 48 US StatesAll Pro 5th Gen 4Runner IFS Skid Plate – Aluminum Black
- Suits 2010-2024 Toyota 4Runner 5th Gen
- Covers from the front bumper down to the first cross member
- 1/4-inch thick 5052 Aluminum – Black Powder Coated
- Optimal balance between strength and weight
- At only 22 lbs, it’s half the weight of similar steel undercarriage protection
- Save yourself from costly underbody repairs with this easy to install 5th Gen 4Runner skid plate
- Skidplate not currently compatible with a diff drop kit – you would have to space it down
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Compatible with All-Pro 2010+ 4Runner Front Bumpers
- Not tested with KDSS Vehicles
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Installation Instructions
$440.00 Add to cart -
SuspensionShips FREE !!
within 48 US StatesDobinsons IMS59-60710 IFP Front Struts for Toyota Tundra and Sequoia
- For 1.75-3.0″ of lift
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Features clip adjustment levels for fine tuning of lift height
- 4 Clip height settings. Lowest height is stock/OE height. Each clip height adds approximately 1/2″ of lift. Use clip heights to fine tune lift height or offset for vehicle lean
- Recommended to run with Dobinsons coils. OE coils may contact the thicker shock body
- TRD Pro models should start at the 2nd clip up to add 1/2″ of coil seat height, which equals the 1″ of lift the PRO’s come with when new
- ASSEMBLY INSTRUCTIONS
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 66mm/2.6” Bodied Series – 60mm hi-flow CNC 6061 Billet alloy piston – 60mm bore – Vehicle specific fitment – Suitable for most heavier vehicles
- 615mm extended, 445mm compressed lengths
- Full 2 year limited warranty, no set rebuild time period
- If you are buying parts separately (coils and struts) and want them preassembled prior to shipping, add this product to your cart also
$720.00 Add to cart -
Sale!Rooftop TentsShips FREE !!
within 48 US StatesOverland Vehicle Systems Bushveld Hard Shell Roof Top Tent – 4 Person
- 3 Piece Cantilever Design
- 1 Piece Polymer Cover
- Premium 600D Rip Stop Polyester Canvas Waterproof Material Premium 420D Oxford Rip Stop Waterproof Cover
- 120G Environmental Fadeless Gaze Breathable
- Ballistic Nylon Pull Strap
- Nitrogen Gas Charged 35.5 inch X 1 inch Strut
- Marine Grade 304 Stainless Steel Hardware
- 96 inch Tubular Telescoping Ladder
- Universal Adjustable Aluminum Mounting Channel
- Mil Spec Weatherproof Seal
- 3 inch Memory Comfort Foam Mattress
- Built-in Anti-Condensation Mat
- 4 Built In Personal Pouches
- Skylight Opening 39 foot X 25.5 inch
- Gray Body With Green Rainfly
- Download Instructions
Original price was: $2,799.99.$2,649.99Current price is: $2,649.99. Read more -
All Pro OffroadShips FREE !!
within 48 US StatesAll Pro Tacoma IFS Skid Plate – Aluminum Black
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Covers from the front bumper down to the first cross member
- 1/4-inch aluminum construction – Black Powder Coated Steel
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Installation Instructions
$440.00 Add to cart -
Dobinsons
Dobinsons Greasable Bolt Pair | Ford Nissan and Toyota (SP59-060)
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Kit includes 2 greasable bolts, as shown in the photo
- Order 2 kits if you want to replace fixed and shackle end bolts
- Suits Toyota Tundra and Tacoma as well as Nissan Frontier D40 and D41, Ranger 2019+. See full vehicle list below
$60.00 Add to cart -
All Pro OffroadShips FREE !!
within 48 US StatesAll Pro Tacoma IFS Skid Plate – Raw Aluminum
- Suits 2005-2023 Toyota Tacoma 4×4 Models
- Covers from the front bumper down to the first cross member
- 1/4-inch aluminum construction – Raw aluminum
- Optimal balance between strength and weight
- Save yourself from costly underbody repairs with this easy to install Tacoma skid plate
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Installation Instructions
$380.00 Add to cart -
Upper Control Arms
Pair of UCA Pivot Bolts and Nuts | Toyota and Lexus
- This is a pair of factory size upper control arm pivot bolts and nuts replacements to service two control arms
- Commonly referred to “as the long UCA bolt”
- Services both control arms at once
- Does not come with any washers. New aftermarket UCA’s usually come with the necessary washers
- Vehicle Fitment
-
- 2003-2009 Toyota 4Runner
- 2010-2024 Toyota 4Runner
- 2005-2015 Toyota Tacoma
- 2016-2023 Toyota Tacoma
- 2006+ FJ Cruiser (all years)
- 2003-2009 Lexus GX470
- 2010-2023 Lexus GX460
- Toyota Hilux Vigo
- Toyota Hilux Revo
- Toyota Fortuner
- Toyota Prado 120
- Toyota Prado 150
- Bolt Grade: 10.9
- Head Drive Type: Hex
- Length: 351 mm
- Material: Steel
- SAE or Metric: Metric
- Thread Diameter: 14 mm
- Thread Length: 28.7 mm
- Thread Size: 14 mm
- Thread Type: Fine
$69.00 Add to cart -
Suspension
Air Lift 60728 Rear Helper Air Springs (Airbags) | 80 Series 100 Series Sequoia
- Air Lift 60728 Suits Toyota Landcruiser 80 and 100 Series and Lexus LX450 and LX470, Toyota Sequoia 2001-2007 with coil springs in the rear
- Complete kit – 1 per vehicle
- Inserts inside your rear coil springs to add additional load support
- Manually inflate or deflate the air bags to add or remove support or height
- Perfect for people who tow, or regularly load up fully and need additional height or support
- Works with all Dobinsons rear coils for these vehicles up to 2.5″ of lift
- Works with 0-2.5″ of lift
- Route the airlines to your rear bumper or a suitable place to easily add or remove air to the bags
- Installation Manual, Click Here
$148.00 Add to cart -
Sale!AwningsShips FREE !!
within 48 US StatesOverland Vehicle Systems Nomadic 6.5FT Awning (2.0M) – With Black Cover
- 53 Square Feet of Covered Shelter
- 280G Poly Cotton Rip-Stop Cover
- Boxed Aluminum Rafters
- Pivoting Aluminum Adjustable Poles
- Tie Down Points for Securing Poles and Water Run Off
- 1000G PVC Travel Cover With 10 Lb Zipper
- Ballistic Nylon Tie Downs With S Connects and Buckle
- Shock Cord With Retention
- Zippers To Secure Enclosed Shelter
- Heavy Duty Oversized Stakes
What’s included:
- Nomadic 6.5FT Awning With 2 Built-In Aluminum Rafters
- 2 Pivoting and Telescoping Aluminum Poles
- 2 Sets of Shock Cord
- 2 Heavy Duty Stakes
- Travel Cover
- 2 Heavy Duty Mounting Brackets and Hardware
- Nylon Reinforced Tie Down Kit
- Opened: 98.5 inch x 78.5 inch (8.2FT out x 6.5FT wide)
Original price was: $299.99.$199.99Current price is: $199.99. Add to cart -
Skid Plates + Sliders - 5th Gen 4RunnerShips FREE !!
within 48 US StatesAll Pro 5th Gen 4Runner IFS Skid Plate – Bare Aluminum
- Suits 2010-2024 Toyota 4Runner 5th Gen
- Covers from the front bumper down to the first cross member
- 1/4-inch thick 5052 Aluminum – Bare
- Optimal balance between strength and weight
- At only 22 lbs, it’s half the weight of similar steel undercarriage protection
- Save yourself from costly underbody repairs with this easy to install 5th Gen 4Runner skid plate
- Skidplate not currently compatible with a diff drop kit – you would have to space it down
- Easy, bolt-on installation using all factory hardware
- Compatible with stock bumpers
- Compatible with All-Pro 2010+ 4Runner Front Bumpers
- Not tested with KDSS Vehicles
- Available in 4 variants – Steel or Aluminum, Bare or Powder Coated
- Installation Instructions
$380.00 Add to cart -
SuspensionShips FREE !!
within 48 US StatesDobinsons MRA59-A649 3-Way Adjustable Rear Shocks for Toyota
- Suits various vehicles, list is down below
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your springs, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Piggyback Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- 626mm extended, 400mm compressed
- Full 2 year limited warranty, no set rebuild time period
$1,150.00 Add to cart -
Ranger 2019+ (US Spec)
Dobinsons SK19-058 Greasable Shackle Kit | Ford Ranger 2019-2023 USA Spec
- Suits Ford Ranger 2019-2023 USA Spec
- Recessed twin hole greasable design
- Reduces friction in bushes, creating a more comfortable ride
- Heavy duty design and provide simple service through external grease nipples
- Sold as a pair to replace the original shackles
- Incredibly tough and durable gold zinc plating
- Photo for illustration purposes
$110.00 Add to cart -
Rooftop TentsShips FREE !!
within 48 US StatesOverland Vehicle Systems Mamba 3 Aluminum Hard Shell Rooftop Tent
- Aluminum Clamshell design, better aerodynamics, light for its size, excellent weather resistance, easiest to setup
- Base Material: Aircraft Grade Aluminum
- Body: Premium 600D Rip Stop Polyester Canvas Waterproof Material
- Window Screens: 120G Environmental Fadeless Breathable Gaze
- Mattress: 2” High Density Foam
- Anticondensation Mat: Yes @ ¾” Thick
- Base: 1” Aluminum Honeycomb Insulated
- Inside Storage: Oversized Storage Loft
- Base Storage: 2 Built in Storage Bags
- Closed Dimensions: 91” x 55.5” x 8”
- Open Dimensions: 91” x 55.5” x 64”
- Sleeping Area: 86” x 50”
- Sleeping Count: 2 -3
- Weight: 150 Lbs
- Hardware Included: Yes
- Storage Rack Included: Yes
- Struts: 2x Nitrogen Gas Charged Struts, 35.5” x 1” 400N
- Pull Down Strap: Ballistic Nylon
- Handles: Aircraft Grade Aluminum
- Seal: Military Specked Waterproof Grade
- Set Up: Less than a Minute, Easiest of all Roof Top Tents
- Put Away: Less than a Minute, Easiest of all Roof Top Tent
$2,699.99 Add to cart
Cart totals
| Subtotal | $24,050.54 |
|---|---|
| Shipping |
Shipping to FL. |
| Tax | $1,803.81 |
| Total | $26,259.35 |
