Your cart is currently empty!
Shop
Showing 541–570 of 1944 resultsSorted by popularity
-
4Runner 5th Gen (2010-2024)RCI 5th Gen 4Runner Engine Skid Plate without KDSS
- Fits non-KDSS Model 5th Gen 4Runners 2010-2024
- Includes front skid plate ONLY
- Protects front two cross-members, low hanging front differential, oil pan, transmission, second and third cross-members, exhaust cross pipe, and transfer-case
- Excellent addition or replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Built in oil drain holes allow easy access and ability to change oil without removal of plate
- Engine skid plates come standard with center mounting posts for substantially increased strength
- Engine skid plate includes differential drop cage for maximum security and ground clearance, PLUS this feature allows the use of differential drop kits without having to space the skid plate down
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat finish is standard on steel skid plates for a rust resistant, durable and high quality finish, optional on aluminum
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA
(4 reviews) -
Frontier D41 2022+
2022 Frontier Lift Kit Dobinsons 2-3″ IMS Kit | Nissan Frontier D41 2022+
- Complete Dobinsons IMS Suspension Kit for your 2022+ Nissan Frontier D41 Truck
- Choose what front and rear lift heights and load ratings you would like, and whatever optional parts you would like
- Nothing is included if it is not selected down below
- Fully rebuildable and re-valvable
- Adjustable height front struts (requires coil to be compressed above the coil seat to adjust height)
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg, Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO 9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Photo represents a complete kit if you purchase all of those items
(12 reviews) -
Frontier D41 2022+
Dobinsons L45-004-R Leaf Springs Pair | Frontier D40 and D41
- 2022+ Nissan Frontier D41 Truck – 3″ Lift with 440LBS constant rear load or 2″ with 880LBS Constant Rear Load, and 2.0″ with 880LBS constant load on a 2005-2021 Nissan Frontier D40
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO 9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- These are leaf springs ONLY and don’t come with bushings or any other parts
(3 reviews) -
Sale!RecoveryFREE SHIPPING
within 48 US StatesOVS Tow Strap 30,000 lb. 3″ x 30′ Gray With Black Ends & Storage Bag
Construction
- Manufactured out heavy duty synthetic fiber with a 30,000 lb. breaking strength
- 30 foot long 3 inch wide folded and double stitched end with a heavy-duty padded protective sleeve
- Loop size is 10 inch which is ideal for all types of rigging including soft shackles and D Rings
- Tightly woven 30 strands per inch reinforced synthetic fiber material for extra durability
- Soft and pliable material flexes easy with no stretch and is ideal for static recovery situations
- Included storage bag with mesh at the bottom that allows dirt and debris to escape
Functions
- Ideal for daisy chaining vehicles through tough obstacles or long pulls with inoperable vehicle
- Can be used as a winch extension when extra length is needed
- Clean all mud and sand off of all synthetic ropes and straps as soon as you get home. Sand granules have sharp edges that can cut into the fibers at the microscopic level reducing the safe load rating
(8 reviews) -
FJ/BJ70, BJ71, FJ/BJ73, FJ/BJ74
Dobinsons HJ75-7L-F Front Medium Load Leaf Springs Pair
- Front Leaf Springs for the Toyota FJ/BJ70, BJ71, FJ/BJ73, FJ/BJ74 4×4 from 1985 to 1989, 70 Series – HZJ70, HZJ73, PZJ70, PZJ73 1990-1999
- 45mm front lift with stock front end weight
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, includes 1 left and 1 right spring (different heights to correct lean)
(2 reviews) -
LJ70, LJ72, LJ73, LJ77 - 90-93 - Square Headlights
Dobinsons C59-247 2.5″ Rear Coil Springs | LAND CRUISER 70 Series Multiple Models – Pair
- Dobinsons C59-247 Rear Coil Springs for TOYOTA LAND CRUISER LJ70, LJ72, LJ73, LJ77 1/90-5/93 2.5″ with 220lbs of rear constant weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold as a Pair
(9 reviews) -
Tundra 2nd Gen (2007-2021)
RCI Engine Skid Plate | 07-21 Tundra & 08-22 Sequoia
- Suits 2nd Gen Tundra (2007-2021) and Sequoia (2008-2022)
- Includes front engine skid plate only
- Protects power steering unit, front differential, front cross-member, engine, engine bay, and radiator
- Mounts to radiator cross-member without interfering with aftermarket bumpers, hidden winch, etc.
- Excellent replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Easy access to oil filter by removal of access door using only two bolts
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat standard on steel skid plates for a rust resistant, durable and high quality finish
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA.
(6 reviews) -
40 Series Land Cruiser Early (1960-1979)
Toyota FJ40 FJ42 Series 1960-1979 Long Range Replacement Fuel Tank (29gal)
- Suits Toyota FJ40 FJ42 Series Land Cruiser 1960-1979 (early models)
- This is a replacement tank that replaces your OE fuel tank, it holds 29 gallons instead of the stock 18.5 gallons and fills the same way an OE tank fills
- 29 gallon capacity, replaces the original tank
- Suits gasoline or diesel fuel
- Tank fills using OEM gas door
- No Exhaust modification required
- Fitting time – approximately 3 hours
- Part Number TLC40ER
- Fitting Instructions – Intended to be installed by a certified mechanic
- Requires minor modifications to seat bracket and tool box removal
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This cannot be sold to any California registered vehicle or any address in California, as it is not CARB compliant for use in that state
- MADE IN AUSTRALIA
(5 reviews) -
200 Series Land Cruiser (2008-2021)
Toyota Land Cruiser 200 Series 2008-2021 Long Range Auxiliary Fuel Tank (12.5gal)
- Suits Toyota Landcruiser 200 Series 2008-2021 with the gas engine, also suits the Lexus LX570 of the same years
- This is an additional tank that goes above the factory spare tire, it holds 12.5 gallons, and uses a transfer pump to fill your main tank when you hit a switch
- 12.5 gallon capacity, fits above where OE spare tire sat (does NOT require spare tire relocation) for maximum rear clearance!!
- 12.5 gallons plus your original 25 gallon tank gives you a capacity of 37.5 gallons in total!!
- Tank fills using the OEM gas door and supplied parts, including a dual filler neck
- Fill either your regular tank or your AUX tank
- Tank uses a transfer pump to fill the main tank, 2L per minute pump rate
- No Exhaust modification required
- Fitting time – approximately 10-12 hours
- Part Number TLC200SA-12.5G
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
(5 reviews) -
Skid PlatesFREE SHIPPING
within 48 US StatesARB 5421100 Skid Plate Kit | Toyota FJ Cruiser
- Suits all Toyota FJ Cruiser (all years). Also fits 4th and 5th Gen 4runners without KDSS
- 3mm pressed and folded sheet steel adds more strength than a standard folded sheet.
- Laser cut sheet steel.
- Zinc plated and powder coated with a silver textured finish.
- Recessed mounting bolts are protected and easy to remove for vehicle servicing.
- The Under Vehicle Protection will fit with or without an ARB front bumper. Fitment has not been confirmed with other aftermarket bumper designs
- Comprises 4 panels: Front Panel (Protects power steering, engine sump, sway bar), Diff Panel (Protects front diff mounts, engine sump), Transmission (Protects transmission and transmission controls) and Transfer Case (Protects transfer case)
- See more details below as well as product video
(9 reviews) -
Dobinsons
2-2.5″ Lift Kit Builder for Toyota Tundra 2000-2006
- Now you can build your own suspension kit with everything from Exit Offroad
- This page is for the 2000 to 2006 Toyota Tundra 4×4 with V8 Engine
- Use adjustable height IMS struts to go from 2″ to 2.5″ of front lift
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Choose what you’d like to add and build the price auto-adjusts
- You can add or remove whichever items you would like
- It’s recommended that the IMS and MRA coilovers to be run with a diff drop kit and aftermarket UCA’s for coilover clearance and correct travel
(7 reviews) -
Bump Stops & Spacers
Wheeler’s Rear Superbumps for Tundra & Canyon/Colorado
- Suits 2007 to 2021 Toyota Tundra and 2015-2022 Chevy Colorado and GMC Canyon Rear Ends
- Bolts in easily and quickly to replace the firm factory bump stops
- Includes necessary bump stops (2), goes under the factory u-bolts
- Made of a super durable micro-cellular polyurethane formula
- Provides controlled, progressive and comfortable bottoming response from your front suspension
- Installation Instructions
(7 reviews) -
100 Series Land Cruiser IFS (1998-2007)
Toyota Land Cruiser 100 Series 1998-2004 Long Range Auxiliary Fuel Tank (24gal)
- Suits Toyota Landcruiser 100 Series 1998-2004 with the any engine option, gas or diesel
- This is an additional tank that goes where the factory spare tire sat, it holds 24 gallons, and uses a transfer pump to fill your main tank when you hit a switch
- 24 gallon capacity, fits where OE spare tire sat (requires spare relocation)
- 24 gallons plus your original 25 gallon tank gives you a capacity of 49 gallons in total, or you can also add the LRA replacement tank which is 40 instead of 25 gallons, bringing total capacity up to 64 gallons!!
- Tank fills using OEM gas door with supplied dual filler neck, custom made by LRA
- Tank uses a transfer pump to fill the main tank, 2L per minute pump rate
- No Exhaust modification required
- Fitting time – approximately 5 hours
- 24 gallon tank is built the same as the 40gal, but with better clearance and departure angle (hangs down less)
- Part Number TLC100AX24GAL-US
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
(5 reviews) -
80 Series Land Cruiser (1990-1997)
Toyota Land Cruiser 80 Series 1990-1997 Long Range Auxiliary Fuel Tank (24gal)
- Suits Toyota Landcruiser 80 Series and Lexus LX450 1990-1997 with the any engine option, gas or diesel
- This is an additional tank that goes where the factory spare tire sat, it holds 24 gallons, and uses a transfer pump to fill your main tank when you hit a switch
- 24 gallon capacity, fits where OE spare tire sat (requires spare relocation)
- 24 gallons plus your original 25 gallon tank gives you a capacity of 49 gallons in total, or you can also add the LRA replacement tank which is 37 instead of 25 gallons, bringing total capacity up to 61 gallons!!
- Tank fills using OEM gas door with supplied dual filler neck, custom made by LRA
- Tank uses a transfer pump to fill the main tank, 2L per minute pump rate
- No Exhaust modification required
- Fitting time – approximately 5 hours
- Photos show the 42 gallon version. 24 gallon tank is built the same but with better clearance and departure angle (hangs down less)
- Part Number TLC80RAX24G
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
(5 reviews) -
80 Series Land Cruiser (1990-1997)
Toyota Land Cruiser 80 Series 1990-1997 Long Range Auxiliary Fuel Tank (42gal)
- Suits Toyota Landcruiser 80 Series and Lexus LX450 1990-1997 with the any engine option, gas or diesel
- This is an additional tank that goes where the factory spare tire sat, it holds 42 gallons, and uses a transfer pump to fill your main tank when you hit a switch
- 42 gallon capacity, fits where OE spare tire sat (requires spare relocation)
- 42 gallons plus your original 25 gallon tank gives you a capacity of 67 gallons in total, or you can also add the LRA replacement tank which is 37 instead of 25 gallons, bringing total capacity up to 79 gallons!!
- Tank fills using OEM gas door with supplied dual filler neck, custom made by LRA
- Tank uses a transfer pump to fill the main tank, 2L per minute pump rate
- No Exhaust modification required
- Fitting time – approximately 5 hours
- Part Number TLC80RAX
- LRA also makes a 24 gallon Aux tank, smaller version of this 42 gallon version
- Fitting Instructions – Intended to be installed by a certified mechanic
- This item ships on a pallet to the nearest Truck Freight terminal for you to pickup. We will be in touch with you regarding the nearest freight terminal, unless you add home delivery.
- This product can not be sold or shipped to residents in California. Do not order this product if you live in California!!
- MADE IN AUSTRALIA
(5 reviews) -
Dobinsons
Dobinsons Add-A-Leaf Center Bolt Pin (Single) (10-100)
- Used in place of original leaf bolt when adding a leaf
- Fits L59-113-R-R6 ONLY
- Sold individually
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Requires lifted leaf springs to ensure proper fitment
(6 reviews) -
60 62 Series Land Cruiser (1980-1989)
Dobinsons HJ61-8L-R Rear Heavy Load Leaf Springs Pair for 60 62 Series
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair, includes 1 left and 1 right spring (different heights to correct lean)
- 50mm (2″) rear lift with 400-660LBS of additional weight
(10 reviews) -
Early FJ Cruiser (2006-2009)FREE SHIPPING
within 48 US StatesDobinsons 1.5″ to 3.5″ IMS Lift Kit | FJ Cruiser 2006-2009
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front IMS Struts, 2 Rear IMS Shocks, and 4 Coil Springs
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
(8 reviews) -
Tacoma 3rd Gen (2016-2023)
RCI Rock Sliders | 2016-2023 Tacoma
- Fits 2016-2023 Tacoma 4wd access cab and double cab trucks
- Protects rocker panels and doors
- Our sliders utilize a 2″ square main tube which is far stronger than 1.75″ round tube used by competitors
- 1.75″ DOM outer rails are now standard for uncompromised strength
- Heavy duty 1/4″ gussets on all legs
- 45 degree mitered main tube ends provide a superior aesthetic appearance as well as more functional design that won’t hang up
- Full length 3/16″ frame plate and FOUR leg design guarantee a slider as strong or stronger than anything on the market
- Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
- Standard 20 degree upward angle creates a low profile with maximum ground clearance
- Direct bolt on addition to existing mounting locations, no drilling required
- Easy install with only basic hand tools
- Grade 8 hardware and installation instructions provided
- Standard with our signature low profile rear kickout
- Made to order from your selections below
- Made in USA
(8 reviews) -
4Runner 4th Gen (2003-2009)
RCI Rock Sliders | 03-09 4Runner + GX 470
- Fits 2003-2009 4runners without Xreas, unless you’ve removed those lines. Also fits 03-09 GX470, however it will require removing the factory steps / trim below the body pinch seam
- Protects rocker panels and doors
- Our sliders utilize a 2″ square main tube which is far stronger than 1.75″ round tube used by competitors
- 1.75″ DOM outer rails are now standard for uncompromised strength
- Heavy duty 1/4″ gussets on all legs
- 45 degree mitered main tube ends provide a superior aesthetic appearance as well as more functional design that won’t hang up
- Full length 1/4″ frame plate and three leg design guarantee a slider as strong or stronger than anything on the market
- Easily capable of supporting the entire side of truck for lifting with hi-lift, or sliding on rocks
- 5° upward angle creates a low profile with maximum ground clearance, while remaining usable as a step
- Direct bolt on addition to existing mounting locations, no drilling required
- Easy install with only basic hand tools
- Grade 8 hardware and installation instructions provided
- Standard with our signature low profile rear kickout
- *Does not fit KDSS models of GX470, unless you remove KDSS system from frame
- Made to order from your selections below
- Made in USA
(5 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons IMS45-50642 Front 2.2″ IFP Struts Pair | Frontier Xterra R51 Pathfinder (0-2.5″)
- IMS front struts for 0-2.5″ of lift on Nissan Frontier D40 and D41, Nissan Navara D40 and D23, Nissan Xterra (2005-2015), Nissan Pathfinder R51
- SOLD IN PAIRS
- Adjustable height front struts (requires coil to be compressed above the coil seat to adjust height)
- Fully rebuildable and re-valvable
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Specs: 385mm extended, 266mm compressed
- Full 2 year limited warranty, no set rebuild time period
(16 reviews) -
Trooper
Dobinsons Heavy Duty Torsion Bar Pair for Isuzu Trooper (Acura SLX) 1992 to 2002
- For all Isuzu Trooper and Acura SLX models from 1992 to 2002
- 1220 mm total length, 30mm bar thickness
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
(5 reviews) -
Early FJ Cruiser (2006-2009)FREE SHIPPING
within 48 US StatesDobinsons 1.5″ to 3.5″ Lift Kit Toyota FJ Cruiser 2006-2009 (all options)
- Suits 2006-2009 Toyota FJ Cruiser
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Base Kit Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs
- Every possible option is listed on this page in the drop downs below
(12 reviews) -
Honda
Dobinsons C23-104 Front Coil Springs for Honda CRV 2002-2006 40mm 1.5″ Lift – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(10 reviews) -
KL Cherokee (2014-2022) (Trailhawk)FREE SHIPPING
within 48 US StatesDobinsons Cherokee Trailhawk Lift Kit for 4X4 Jeep KL 2014 to 2022 inc Sport + Latitude
- Trailhawk (AD2) lifts 1.25″ front and 1.0″ rear. Sport (AD1) models lift 2″ front, and 2″ rear.
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Superior Designed Nitro Gas Shocks, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Includes 2 Front Struts, 2 Rear Shocks, and 4 Coil Springs. Other new OEM components may be required during install.
- GS29-430 Jeep Cherokee KL Front Struts Installation Note
(11 reviews) -
Accessories
Dobinsons 4×4 Roll Out Awning 6.5FT x 9.8FT Medium Size with LED Light
- Measures 2.0M (6.5FT) against the vehicle, extending out 3.0M (9.8FT) away from the vehicle
- Heavy Duty Waterproof, Breathable Rip-stop 420D PU Oxford Polyester
- Could mount to left or right hand side
- Complete with Fitting Instructions & Tools, Poles, Ropes & Pegs
- Quick, Simple Setup & Pack Up. Manually opens and closes (not automatic)
- Includes LED Light strip
(10 reviews) -
RecoveryFREE SHIPPING
within 48 US StatesDobinsons 12V Electric Winch – 12000 LBS with Synthetic Rope
- 12,000 Capacity
- 6.5HP Series Wound Motor
- 216:1 Gear Reduction
- 57 LBS Weight
- 10×4.5″ Mounting Pattern
- 6.3 x 8.3 x 21.5″ Overall Dimensions
- 64 x 224mm Drum, Automatic Braking Action
- 3 Stage Planetary Gears
- Plug in Control Range of 10 FT
- Includes Various Control Box Mounting Brackets: Control Box to Cross Rods, Motor Housing & Flat Surface/Bumper Tops
- Sealed Solenoid Box, More Powerful
- Easy Quick Flop Clutch
- Improved Casings
- Motor Housing Breather
- Includes 100FT Synthetic Rope with Hook, Aluminum Hawse Fairlead, Hand Held Control and Wireless Remote (30ft Range)
(11 reviews) -
Suspension
Apache Offroad HD Chromoly Front Adjustable Sway Bar Links | 4Runner FJ GX470 GX460 Tacoma
- Suits 4th and 5th Gen 4Runner 2003-2024, FJ Cruiser (all years), GX470, GX460 (without KDSS) and Tacoma 2005-2023
- Order 1 for 1 vehicle
- Adjustable (on vehicle) from 140mm – 180mm – Suits stock or lifted vehicles.
- Custom Forged Oversized (22mm ball) Chromoly Rod End / Joints
- Premium Silicone Dust Boots
- High Carbon Steel Center Link
- Black EDP Coating for corrosion resistance
- Serrated Oval / Distorted Thread Locking Nut – The factory sway bar material expands and contracts as you drive, thus causing the nut to come loose and the sway bar link to disconnect. This is not ideal. This style nut, is the best solution we have found to the issue, though we do still recommend the use of thread locker at install
- Mounting hardware included
- Rod end machined to accept hex key to prevent the rod end from spinning during installation. Other brands come with a nut on the inner side of the shaft, which is harder to use and more likely to cause you to tear the boot upon installation
- Sold as a pair
- Maintenance Free Design
- 2 year unlimited mile warranty
(10 reviews) -
Bump Stops & Spacers
Apache Offroad 2″ Rear Bump Stop Extensions | 4Runner FJ Cruiser GX470 GX460
- Apache Offroad 2″ Rear Offset Bump Stop Extensions are required for rear long travel applications
- Prevents the shock from limiting out during up travel and damaging the shock, thus shortening its life
- Our 2″ extensions allow for maximum travel and are offset to allow for the use of larger tires without rubbing, as they are prone to do in the factory location
- They also reposition the bump stop to account for correct alignment with your long travel suspension
- Fabricated out of 3/16″ steel and powder coated black.
- Grade 8 Mounting Hardware Included
- Sold as a pair, 1 per vehicle needed
- Use with OEM bump stops or aftermarket ones, depending on how much you need to limit your up travel
- Suits:
- 2003-2024 Toyota 4Runner
- 2007-2019 Toyota FJ Cruiser
- 2002-2009 Lexus GX 470
- 2010-2023 Lexus GX 460
(10 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-223VB Rear Coil Springs | Land Cruiser – Pair Black
- 80 SERIES (1990-1997) and Lexus LX450 – Dobinsons c59-223v – 1.75″ lift with up to 220lbs weight
- 100 SERIES (1998-2007) and Lexus LX470 – Dobinsons C59-223V – 1-1.25″ lift, variable rate, with stock weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish – BLACK
- 19mm wire diameter, 445/455mm free height, variable rate
- Sold in Pairs
(0 reviews)
