Your cart is currently empty!
Shop
Showing 1261–1290 of 2200 resultsSorted by popularity
-
Fridge/FreezersFREE SHIPPING
within 48 US StatesDobinsons 4×4 12V Portable 40L Fridge Freezer
- Utilizes Highest Quality Danfoss BD-35F Compressor – Maximum Cooling Efficiency with Minimal Power Drain
- 12/24V DC, comes with AC 240V external adapter
- Suitable for car, truck, SUV, RV, Boat, Bus, Ambulance, Travel Trailers
- Integrated 3 stage low voltage cut-off battery protection with auto restart
- High quality insulation to minimize exterior sizing but maximize internal capacity
(5 reviews) -
Snorkel
Dobinsons 4×4 Snorkel Kit | Toyota Land Cruiser 70 71 73 74 75 78 79 Series 1985-07 3.4L/4.0L
- Dobinsons SN59-3374 Suits 4.0L Diesel, 4.0L Petrol, 3.4L Diesel
- 1985 to 2007 (Narrow Front) 70 Series Toyota Land Cruisers, including the 70, 71, 73, 74, 75, 78, and 79 Series variant
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- Manufactured from high quality UV resistant LLDPE
(8 reviews) -
Recovery
Dobinsons 4×4 Off Road Rapid Tire Deflator with Gauge and Pouch
- 0-60 PSI Gauge Included at 1PSI Increments, giving easy and accurate readings
- Quick Release Coupling to Allow Pressure Checking at any time during Deflation
- Corrosion Resistant Brass Fittings for Long Life
- Includes Carry Case
- Combine with Dobinsons Air Compressor and Deluxe Tire Repair Kit for a Complete Tire Maintenance Package
(7 reviews) -
Awnings
Dobinsons 4×4 Roll Out Awning 4.6FT x 6.5FT Small Size with LED Light
- Measures 1.4M (4.6FT) against the vehicle, extending out 2.0M (6.5FT) away from the vehicle
- Heavy Duty Waterproof, Breathable Rip-stop 420D PU Oxford Polyester
- Could mount to left or right hand side or facing rear, due to small size
- Complete with Fitting Instructions & Tools, Poles, Ropes & Pegs
- Quick, Simple Setup & Pack Up. Manually opens and closes (not automatic)
- Included LED Strip Light
(10 reviews) -
Sidekick/Tracker (1988-1998)
2.5″ Front Strut Spacers for Suzuki Sidekick Geo Tracker X90 1989-1998
- Suits Suzuki Sidekick and Geo Tracker 1989-1998 and Suzuki X-90
- Spaces down the strut by 2.5″, for use when using coil spacers or lifted coil springs
- Made of high quality red polyurethane
- Includes installation hardware
- Sold in Pairs
- Mounts on top of the strut
- Installation Instructions
- Link to matching Coil Spacers
(0 reviews) -
Spacers
Coil Spacers for Suzuki Sidekick X90 XL7 Vitara Geo Chevy Tracker
- Suits Suzuki Sidekick and Geo Tracker 1989-1998, Suzuki X-90, Suzuki Vitara and Grand Vitara 1999-2004, Suzuki XL7 1999-2004, Chevrolet Tracker 1999-2004
- Pair of Front or Rear Spacers (they work on both front and rear)
- Made of high quality red polyurethane
- Sold in Pairs
- Choose from 1.0″, 1.5″ or 2.0″ lift heights
- Mounts on top of the coil spring
(0 reviews)$63.76 – $74.38 Select options This product has multiple variants. The options may be chosen on the product page -
Sale!Suspension
Dobinsons GS59-651 Rear Twin Tube Shocks Pair | Scratch & Dent
- Scratch & Dent Pair. Customer ordered the wrong size shocks, attempted to install but they’re too long for his vehicle, returned. Mild shipping scuffs back and forth, but never actually used
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- See list of suitable vehicles down below
- 591mm extended, 363mm compressed
- 60mm diameter outer tube size
(0 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons MRA45-A913 3-Way Adjustable MRR Rear Shocks Pair
- Suits REAR Nissan Patrol GQ Y60 1987-1998 4″ Lifts, and Nissan Patrol GU Y61 2007+ 3-4″ Lifts, and Toyota Land Cruiser 78/79 Series Trucks 1999+ with 3″ lift, Dodge Ram 1500 4×4 1994-2008, Dodge Ram 4×4 1500 2009-2021, Dodge Ram 4×4 2500HD 1994-2013, Dodge Ram 4×4 3500HD 1994-2021,
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Universal Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Bump stop extensions and longer brake lines must be run with these longer shocks on some models
- Full 2 year limited warranty, no set rebuild time period
(0 reviews) -
Dobinsons
Front Remote Resi Mounting Bracket Kit for Patrol GU GQ
- Suits FRONT Nissan Patrol GQ Y60 1987-1998 4″ Lifts, and Nissan Patrol GU Y61 2007+ 3-4″ Lifts, and Toyota Land Cruiser 78/79 Series Trucks 1999+ with 4″ lift.
- This is recommended to run with Dobinsons front MRR remote resi shocks for an easier mounting and access point for the front reservoir
- Includes both sides to install the resi onto the coil tower
(0 reviews) -
SuspensionFREE SHIPPING
within 48 US StatesDobinsons MRA45-A914 3-Way Adjustable MRR Front Shocks Pair
- Suits FRONT Nissan Patrol GQ Y60 1987-1998 4″ Lifts, and Nissan Patrol GU Y61 2007+ 3-4″ Lifts, and Toyota Land Cruiser 78/79 Series Trucks 1999+ with 4″ lift
- 3-way adjustable valving – Adjust high and low speed compression and rebound
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Universal Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Installation Instructions of the MRA Shocks
- Bump stop extensions and longer brake lines must be run with these longer shocks
- Full 2 year limited warranty, no set rebuild time period
- It is recommended to run these shocks with Remote Resi bracket kit RM45-007 for a cleaner and easier installation
(0 reviews) -
Performance Upgrades - Tundra 2nd Gen
TG Hub-Centric Wheel Spacers Pair 5×150 | From 3/4″ to 2.0″
- Suits 1998-2007 Toyota Land Cruiser 100 Series and Lexus LX470 REAR WHEELS ONLY
- Front and Rear for these: 2008-2021 Toyota Land Cruiser 200 Series and Lexus LX570, 2008-2022 Toyota Sequoia, 2007-2021 Toyota Tundra
- Multiple thickness options from 3/4″ up to 2.0″ thick
- 5x150mm Bolt Pattern
- Billet 6061-T6 Aluminum
- Anodized black with Laser-engraved Trail-Gear Logo
- Class 10.9 M14-1.5 studs and nuts
- For Toyota and Lexus Vehicles with Hub-Centric Wheels (must be Hub-Centric)
- Sold in Pairs
- NOTE! Please verify pattern before ordering!
- See vehicle list down below
- On the ¾” & 1” thick wheel spacers, you will need to trim your wheel studs in order for the wheel to seat on the face of the wheel spacer
- Sold in Pairs
- Used wheel spacers cannot be returned under any circumstances
- Installation Guide
(4 reviews)$147.44 – $172.07 Select options This product has multiple variants. The options may be chosen on the product page -
Colorado (USA Model)
TG Chevy Colorado GMC Canyon 1.25″ Wheel Spacers Pair
- Suits 2015-2020 Chevy Colorado and GMC Canyon
- Adds 1.25″ width per side
- Billet 6061-T6 Aluminum
- Anodized black with Laser-engraved Trail-Gear Logo
- 6x120mm lug bolt pattern
- Grade 8 Nuts and Bolts
- Sold in Pairs
- Used wheel spacers cannot be returned under any circumstances
- Installation Guide
(5 reviews) -
Samurai
TG Suzuki Samurai Wheel Spacers Pair 5×5.5 | From 1″ to 2″
- Suits 1986-1995 Suzuki Samurai and 1990-1995 Suzuki Jimny
- Multiple thickness options from 1.0″ up to 2.0″ thick
- Billet 6061-T6 Aluminum
- Anodized black with Laser-engraved Trail-Gear Logo
- Class 10.9 M12-1.25 studs & lug nuts
- 5 on 5.5″ [139.7 mm] lug pattern
- 4.25″ [108 mm] center bore
- Sold in Pairs
- Used wheel spacers cannot be returned under any circumstances
- Installation Guide
(6 reviews)$147.07 – $172.07 Select options This product has multiple variants. The options may be chosen on the product page -
Lighting
Dobinsons Wiring Harness for 7.25″ LED Lights
- Suitable for Zenith 7.25″ driving light LED Pair, SKU DL80-3775K
- Includes switch, relay, and wiring harness, plug and play style
- Water proof light connector, harness comes with 1 x male plug end
- Very fast to install
- May suit other brands of lights, check connection photo for verification
(0 reviews) -
Sale!RCI Off Road
RCI Nissan Frontier Skid Plate Package | 2005-2025
- Suits 4-Door 4×4 Models Only Nissan Frontier D40 2005-2021 and Frontier D41 2022-2025+
- Includes engine, transmission and transfer-case skid plates.
- Protects front two cross-members, low hanging front differential, oil pan, transmission, second and third cross-members, exhaust cross pipe, and transfer-case
- Excellent addition or replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Built in oil drain hole allows easy access and ability to change oil without removal of plate
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat standard on steel skid plates for a rust resistant, durable and high quality finish
- Hardware included
- Direct bolt on addition to existing factory attachment points, no drilling required!
- Choose your options down below
- Weights: Full Steel Set: 160 lbs. Full 1/4″ Aluminum Set: 79 lbs
- Made in Colorado, USA
(0 reviews) -
Bumpers + Roof Racks - LC250
Toyota Land Cruiser 250 Front Bumper – High Clearance
- Suits 2024+ Toyota Land Cruiser 250 Series and Land Cruiser Prado 250 Series
- 100% Australian Made In-House
- +- 136lbs add weight
- Air Bag Compliant
- PDC sensor mounts
- Retains functional radar and front camera
- 5mm Steel Construction
- 10mm Thick Mounting Plate With Eyelet
- 2 3/8 inch (60.3mm) Tube With 0.156″ (3.9mm) DOM Wall
- Included Satin Black Powder Coat
- Power coat can be painted over by your local paint shop to color match your vehicle, and also to add extra protection for longer life
- All bumpers are grit blasted, zinc powder primed, and powder coated satin black
- Low Mount Winch Compatible (with remote-mounted control box)
- Roadvision ADR Approved Indicator
- Roadvision Recessed Accessory Light ( Compatible with Baja designs S2s )
- 4 x Antenna / Aerial Mounts
- 9″ Spot / Driving Light Compatible
- Note: It is highly recommended to add shipping insurance during checkout in case the freight line damages or scratches it in transit.
(0 reviews) -
Hilux Rogue GR Sport Wide Track (2022+)FREE SHIPPING
within 48 US StatesDobinsons MRA59-A461 3-Way Adjustable Rear Shocks Pair | Toyota Hilux Rogue
- Suits Toyota Hilux Rogue GR Sport 2022-2025+ with the shocks mounted outside the frame rails
- 3-way adjustable valving – adjust high and low speed compression and rebound
- The terms MRA and MRR are used interchangeably. The A stands for Adjustable in the part number or SKU
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your springs, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- SOLD IN PAIRS
- Includes Reservoir Bracket and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
(0 reviews) -
Hilux Rogue GR Sport Wide Track (2022+)FREE SHIPPING
within 48 US StatesETA is end of JulyDobinsons Billet Aluminum Adjustable UCA’s Pair | Toyota Hilux Rogue
- Super strong billet aluminum front upper control arms (UCA’s) for Toyota Trucks
- Suits 2022-2025+ Toyota Hilux Rogue and GR Sport Wide Track Models
- Complete kit for both left and right hand side, fully assembled with ball joints pressed in
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- Installation Instructions
- *Must reuse OEM Washers
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
- Replacement Ball Joints can be ordered Here
(0 reviews) -
Hilux Rogue GR Sport Wide Track (2022+)
Dobinsons UB59-440K U-Bolt Kit (2 Pairs)
- UB59-440K Suits 2022+ Toyota Hilux Rogue and GR Sport Wide Track Models
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 4 U-bolts, enough for 2 leaf springs
- These are square at the top
- Suits Dobinsons L59-171-R, L59-173-R, L59-174-R, L59-175-R, L59-176-R leaf springs
- Photo for Illustration purposes only
(0 reviews) -
Hilux Rogue GR Sport Wide Track (2022+)
Dobinsons UB59-439K U-Bolt Kit (2 Pairs)
- UB59-439K Suits 2022+ Toyota Hilux Rogue and GR Sport Wide Track Models
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Includes 4 U-bolts, enough for 2 leaf springs
- These are square at the top
- Suits Dobinsons L59-171-R and L59-178-RP leaf springs
- Photo for Illustration purposes only
(0 reviews) -
Hilux Rogue GR Sport Wide Track (2022+)FREE SHIPPING
within 48 US StatesDobinsons IMS59-50461 Monotube 2.2″ IFP Rear Shocks Pair | Hilux Rogue GR Sport
- Suits 2022-2025+ Toyota Hilux Rogue and GR Sport Wide Track Models (not sold in the USA)
- These mount in the factory positions on the OUTSIDE of the frame/chassis
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photo for illustration purposes
(0 reviews) -
Hilux Rogue GR Sport Wide Track (2022+)FREE SHIPPING
within 48 US StatesDobinsons IMS59-50460 Front 2.2″ IFP Struts | Hilux Rogue GR Sport
- Suits 2022-2025+ Toyota Hilux Rogue and GR Sport Wide Track Models (not sold in the USA)
- Fully rebuildable and re-valvable
- SOLD IN PAIRS
- Height adjustable with a fully threaded body
- Suits any lift height from 0-3″
- Use with Dobinsons C59-302 or C59-314 coils to add lift
- These do not come set to any specific preload height
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height – set to 250mm
- Photos for illustration purposes
(0 reviews) -
Bumpers + Racks - Lexus GX460
RCI Lexus GX460 Full Length Aluminum Roof Rack 2010-2023
- RCI Lexus GX460 Full Length Aluminum Roof Rack – suits 2010-2023 models
- Mount anything from lights, Hi-lift jacks, roof top tents, shower systems, Maxtrax, quick-fist, roto-pax, spare tire, bike mounts, roof baskets, etc
- Heavy duty design will easily support roof top tents and heavy gear
- 1/4″ 5052 aluminum laser cut side panels and rear fairing, 1″x 2″ black anodized T-slot cross-bars, 1/8″ 5052 front fairing
- T-Slot comes machined to accept nut plates and carriage bolts to simplify installation of accessories without ever having to remove bars
- Front wind fairing matches the contour of the roof and windshield for a superior fit and finish and improved aerodynamics
- Includes rubber trim and all necessary hardware for installation
- Our rack is the only one on the market that utilizes injection molded rubber mounting blocks that lift and cushion the roof rack mounting feet AND completely seal out moisture without the need for silicone!
- Built in side panel slots allow unlimited options for adding accessories such as handles, side lighting, awning mounts, and more
- Entirely bolt on design utilizes existing roof rack mounting holes and rubber load bearing pads at front of rack.
- Rack is only 3″ above highest point of the truck (not including antenna)
- Does NOT require the removal or alteration of roof antenna
- Industry standard T-slot cross-bars are compatible with hundreds of accessories
- Heavy duty black textured powdercoat finish comes standard, plus we take it a step further and coat all racks with an epoxy primer for an exponentially more durable finish
- Includes black stainless steel hardware, and trim. We don’t charge extra for high quality hardware
- Easy bolt together assembly, takes about 45 minutes to install
- All hardware and installation instructions provided
- Weighs ONLY 54lbs
- Installation Guide
- Made in the USA
(6 reviews) -
BrakesFREE SHIPPING
within 48 US StatesPowerbrake X-Line Stage 2 Front Nissan Big Brake Kit | Frontier Pathfinder Xterra
Suits the following vehicle models:
- 2005-2021 Nissan Frontier D40 4.0L V6 4×4 6-Lug
- 2022-2025+ Nissan Frontier D22 3.8L V6 4×4 6-Lug
- 2005-2012 Nissan Pathfinder R51 4.0L V6 4×4 6-Lug (won’t suit V8)
- 2005-2015 Nissan Xterra N50 4.0L V6 4×4 6-Lug
Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 2-Piece 13.7″ (350mm) rotors with 72-vane discs
- Semi-float disc drive system allows for radial disc expansion and contraction
- Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- Replacement brake pads are stocked here in the USA – Here
- 17″ Wheel Size is required to run these brakes
- This kit is available by SPECIAL ORDER ONLY, allow 8-12 weeks for us to bring it from South Africa. Special orders are not cancellable or refundable!!
(0 reviews) -
Dobinsons
Dobinsons C59-825V Rear Coil Springs Pair
- Dobinsons C59-825V Rear Coils for the 2021+ Toyota Land Cruiser 300 Series, lifts 30mm (1.2) with 880-1000LBS constant rear added weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Variable Rate Coils
- Longer shocks required, the factory shocks are not long enough to run with these coils
- Select from Twin Tube, IMS Monotube or MRA 3-Way Adjustable with Remote Resi
(0 reviews)$450.00 Select options This product has multiple variants. The options may be chosen on the product page -
Tacoma 1st Gen (1996-2004)FREE SHIPPING
within 48 US StatesPowerbrake X-Line 1st Gen Tacoma Front Big Brake Kit 1995-2004
1995-2004 Toyota Tacoma 4×4 Big Brake Kit (6 Lug Models Only) Includes:
- X-Line billet 6-piston off-road calipers (pair)
- High-performance brake pads, pre-loaded into the calipers
- 1-Piece 13.7″ 72-vane rotors
- Curved, directional cooling vanes
- Billet caliper mounting brackets
- Stainless steel braided brake lines
- Provided brake lines connect to the caliper, replacing the factory rubber lines
- All necessary mounting hardware for quick, easy bolt-on installation
- Comprehensive fitment and bed-in instructions
- Now Includes Upgraded Powerbrake Pads, PB05 Compound – highest level 4×4 brake pads available – made in Japan
- Manufactured, finished and packaged 100% in South Africa
- REQUIRES 17″ WHEELS FOR ADEQUATE CALIPER CLEARANCE
- Replacement or Additional brake pad set
(0 reviews)$3,050.00 Select options This product has multiple variants. The options may be chosen on the product page -
Bump Stops + SpacersFREE SHIPPING
within 48 US StatesDobinsons Hydro 2.2″ Bump Stops – 2.0″ Stroke, 9.4″ Extended (Pair) – HBS56-006
- HBS56-006 – 56mm (2.2″) body | 50mm (2.0″) stroke | 238mm (9.4″) extended | 188mm (7.4″) compressed | 125mm (5.0″) thread length
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 150 PSI
- Extra Short Dead Lengths For Compact Fitment
- No mounting cans or mounting fit kit is included (sold separately)
- Photo attached shows these bump stops installed with the weld-on mounts
(4 reviews) -
Bump Stops - Tundra 2nd GenFREE SHIPPING
within 48 US StatesDobinsons Rear Adjustable Hydro Bump Stop Kit | Tundra 2007-2021
- Suits the Rear of Toyota Tundra 2007 to 2021
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment to adjust when the stop will engage
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 110 PSI
- Extra Short Dead Lengths For Compact Fitment
- Includes full fit kit and 2 hydro bump stops
- Kit Includes:
- HBS59-017FK Mounting Kit
- HBS56-009 Hydraulic Bump Stops
- 46mm – 1.8″ stroke, 105mm – 4″ thread length, 188mm – 7.4″ extended length, 142mm – 5.6″ compressed length
(0 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-617V 4″ Flexi Rear Coil Springs | 200-400LBS Load
- Suits Land Cruiser 80 Series and Lexus LX450
- 4″ rear lift with 200-400 LBS of additional accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(0 reviews)$450.00 Select options This product has multiple variants. The options may be chosen on the product page -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-616V 4″ Flexi Front Coil Springs | 200-400LBS Load
- Suits Land Cruiser 80 Series and Lexus LX450
- 4″ front lift with 200-400 LBS of additional accessory weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(0 reviews)
