Shop

Showing 1921–1950 of 2171 resultsSorted by popularity

Skid Plates, Sliders + Racks - Tacoma 3rd Gen
FREE SHIPPING
within 48 US States
Apex 2005-2023 Toyota Tacoma Rock Sliders
- Suits 2005-2023 Toyota Tacoma Access Cab Long Bed, Dual Cab Short Bed and Dual Cab Long Bed
- SIGNATURE “KICK-OUT” DESIGN
- All Pro Offroad Apex Tacoma Rock Sliders have been trail tested on some of the most grueling trails around, from the Rubicon to the Hammers
- Rock Sliders mount with the included grade 8 hardware including countersunk bolts that are flush with the bottom surface, since exposed bolt heads can be easily mangled by rocks
- All-Pro Rock Sliders are made from heavy duty 1.75” x .120” Steel Tube and 2″ square tube
- The shape of our Tacoma Rock Sliders is very critical and determines how much body protection it will provide as well as how the truck slides along the obstacles without getting hung up
- The outer tubes of the Tacoma Rock Sliders are 1.75″ diameter, and angle upward to provide maximum ground clearance and door protection
- Also included is a one-piece CNC laser cut .125″ steel fill plate with dimple die holes and the APEX logo on the kick-out portion.
- All-Pro Apex Rock Tacoma Rock Sliders not only look great but can be used as a lift point, easily holding the full weight of the vehicle.
- Made from hefty 1.75” x .120 wall DOM steel tubing with 2” square legs that are fully gusseted
- MADE IN THE USA
- INSTALLATION INSTRUCTIONS
Rated 5.00 out of 5
(3 reviews)
$1,199.00 Select options
Skid Plates, Sliders + Racks - Tacoma 3rd Gen
FREE SHIPPING
within 48 US States
All Pro 2005-2023 Toyota Tacoma Rock Sliders
- Suits 2005-2023 Toyota Tacoma Access Cab Long Bed, Dual Cab Short Bed and Dual Cab Long Bed
- SIGNATURE “KICK-OUT” DESIGN
- All Pro Offroad Tacoma Rock Sliders have been trail tested on some of the most grueling trails around, from the Rubicon to the Hammers
- Rock Sliders mount with the included grade 8 hardware including countersunk bolts that are flush with the bottom surface, since exposed bolt heads can be easily mangled by rocks
- All-Pro Rock Sliders are made from heavy duty 1.75” x .120” Steel Tube and 2″ square tube
- The shape of our Tacoma Rock Sliders is very critical and determines how much body protection it will provide as well as how the truck slides along the obstacles without getting hung up
- The outer tubes of the Tacoma Rock Sliders are 1.75″ diameter, and angle upward to provide maximum ground clearance and door protection
- All-Pro Rock Tacoma Rock Sliders not only look great but can be used as a lift point, easily holding the full weight of the vehicle.
- Made from hefty 1.75” x .120 wall DOM steel tubing with 2” square legs that are fully gusseted
- MADE IN THE USA
- INSTALLATION INSTRUCTIONS
Rated 5.00 out of 5
(3 reviews)
$1,099.00 Select options
Skid Plates + Sliders - 5th Gen 4Runner
FREE SHIPPING
within 48 US States
2010-2024 Toyota 4Runner Rock Sliders
- Suits 2010-2024 Toyota 4Runner without XREAS Suspension
- All Pro Offroad 4Runner Rock Sliders have been trail tested on some of the most grueling trails around, from the Rubicon to the Hammers
- They are built from heavy-duty .120″ wall tubing
- The shape of our 4Runner Rock Sliders is very critical and determines how much body protection it will provide as well as how the truck slides along the obstacles without getting hung up
- The outer tubes of the 4Runner Rock Sliders are 1.75″ diameter, and angle upward to provide maximum ground clearance and door protection
- All-Pro Rock 4Runner Rock Sliders not only look great but can be used as a lift point, easily holding the full weight of the vehicle.
- Made from hefty 1.75” x .120 wall DOM steel tubing with 1.75” round legs that are fully gusseted
- MADE IN THE USA
- INSTALLATION INSTRUCTIONS
Rated 5.00 out of 5
(3 reviews)
$899.00 Select options
JK Wrangler (2007-2018)
FREE SHIPPING
within 48 US States
Tax Return Sale, 5% off
Use Coupon TAXTIME
King 4WD Premium Jeep JK 2 Door Soft Top w/ Tinted Windows | 2007-2009
- Suits 2007-2009 Jeep Wrangler JK 2 Door soft top convertibles
- Does not include any framework
- Black Diamond Fabric with 31% smoke colored window tint
- Black Diamond Fabric
  
  Specification: Two Layer 24oz Marine Grade – Waterproof
  
  Testing: CFFA, FMVSS & SAE Requirements
  
  Specification: UV Approved
  
  Testing: Accelerated Light Aging Test – 1000 Hours
- Window Glass
  
  Specification: 96g DOT Approved Pressed flexible vinyl, undistorted, won’t shrink or yellow
  
  Testing: CFFA, FMVSS & SAE Requirements
- Zippers
  
  Specification: Reinforced nylon self-correcting zippers
  
  Testing: 50,000 Cycle Test – No bind or drag
- Velcro
  
  Specification: Industrial Grade Fiber
  
  Testing: 150 kg (330 lbs.) per square inch
- Seams
  
  Specification: 135-gauge thread with heat sealed seams, 4-piece thread per inch
  
  Testing: CFFA, FMVSS & SAE Requirements
- Belt Rails
  
  Specification: Polyethylene and Anti Cracking
  
  Testing: CFFA, FMVSS & SAE Requirements
Rated 5.00 out of 5
(9 reviews)
$379.99 Read more
JK Wrangler (2007-2018)
FREE SHIPPING
within 48 US States
Tax Return Sale, 5% off
Use Coupon TAXTIME
King 4WD Premium Jeep JK 4Door Unlimited Soft Top w/ Tinted Windows | 2007-2009
- Suits 2007-2009 Jeep Wrangler JK 4Door Unlimited soft top convertibles
- Does not include any framework
- Black Diamond Fabric with 31% smoke colored window tint
- Black Diamond Fabric
  
  Specification: Two Layer 24oz Marine Grade – Waterproof
  
  Testing: CFFA, FMVSS & SAE Requirements
  
  Specification: UV Approved
  
  Testing: Accelerated Light Aging Test – 1000 Hours
- Window Glass
  
  Specification: 96g DOT Approved Pressed flexible vinyl, undistorted, won’t shrink or yellow
  
  Testing: CFFA, FMVSS & SAE Requirements
- Zippers
  
  Specification: Reinforced nylon self-correcting zippers
  
  Testing: 50,000 Cycle Test – No bind or drag
- Velcro
  
  Specification: Industrial Grade Fiber
  
  Testing: 150 kg (330 lbs.) per square inch
- Seams
  
  Specification: 135-gauge thread with heat sealed seams, 4-piece thread per inch
  
  Testing: CFFA, FMVSS & SAE Requirements
- Belt Rails
  
  Specification: Polyethylene and Anti Cracking
  
  Testing: CFFA, FMVSS & SAE Requirements
Rated 5.00 out of 5
(8 reviews)
$449.99 Add to cart
JK Wrangler (2007-2018)
FREE SHIPPING
within 48 US States
Tax Return Sale, 5% off
Use Coupon TAXTIME
King 4WD Premium Jeep JK 4Door Unlimited Soft Top w/ Tinted Windows | 2010-2018
- Suits 2010-2018 Jeep Wrangler JK 4Door Unlimited soft top convertibles
- Does not include any framework
- Black Diamond Fabric with 31% smoke colored window tint
- Black Diamond Fabric
  
  Specification: Two Layer 24oz Marine Grade – Waterproof
  
  Testing: CFFA, FMVSS & SAE Requirements
  
  Specification: UV Approved
  
  Testing: Accelerated Light Aging Test – 1000 Hours
- Window Glass
  
  Specification: 96g DOT Approved Pressed flexible vinyl, undistorted, won’t shrink or yellow
  
  Testing: CFFA, FMVSS & SAE Requirements
- Zippers
  
  Specification: Reinforced nylon self-correcting zippers
  
  Testing: 50,000 Cycle Test – No bind or drag
- Velcro
  
  Specification: Industrial Grade Fiber
  
  Testing: 150 kg (330 lbs.) per square inch
- Seams
  
  Specification: 135-gauge thread with heat sealed seams, 4-piece thread per inch
  
  Testing: CFFA, FMVSS & SAE Requirements
- Belt Rails
  
  Specification: Polyethylene and Anti Cracking
  
  Testing: CFFA, FMVSS & SAE Requirements
Rated 5.00 out of 5
(6 reviews)
$439.99 Add to cart
Samurai
FREE SHIPPING
within 48 US States
Tax Return Sale, 5% off
Use Coupon TAXTIME
King 4WD Premium Suzuki Samurai Soft Top w/ Tinted Windows
- King 4WD Replacement Soft Top Fits 1986-1994 Suzuki Samurai and Sierra with Factory Soft Top
- Does not include any framework
- Black Diamond Fabric with 31% smoke colored window tint
- Black Diamond Fabric
  
  Specification: Two Layer 24oz Marine Grade – Waterproof
  
  Testing: CFFA, FMVSS & SAE Requirements
  
  Specification: UV Approved
  
  Testing: Accelerated Light Aging Test – 1000 Hours
- Window Glass
  
  Specification: 96g DOT Approved Pressed flexible vinyl, undistorted, won’t shrink or yellow
  
  Testing: CFFA, FMVSS & SAE Requirements
- Zippers
  
  Specification: Reinforced nylon self-correcting zippers
  
  Testing: 50,000 Cycle Test – No bind or drag
- Velcro
  
  Specification: Industrial Grade Fiber
  
  Testing: 150 kg (330 lbs.) per square inch
- Seams
  
  Specification: 135-gauge thread with heat sealed seams, 4-piece thread per inch
  
  Testing: CFFA, FMVSS & SAE Requirements
- Belt Rails
  
  Specification: Polyethylene and Anti Cracking
  
  Testing: CFFA, FMVSS & SAE Requirements
Rated 5.00 out of 5
(10 reviews)
$249.99 Add to cart
On Backorder
TJ Wrangler (1996-2006)
FREE SHIPPING
within 48 US States
Tax Return Sale, 5% off
Use Coupon TAXTIME
King 4WD Premium TJ Wrangler Soft Top w/ Tinted Windows, w/ Upper Doors 1996-2006
- Suits 1997-2006 Jeep Wrangler TJ 2-door soft top convertibles (not LJ Unlimited)
- Includes full soft top with upper half door windows
- Does not include any framework
- Black Diamond Fabric with 31% smoke colored window tint on rear windows and CLEAR front door windows
- Black Diamond Fabric
  
  Specification: Two Layer 24oz Marine Grade – Waterproof
  
  Testing: CFFA, FMVSS & SAE Requirements
  
  Specification: UV Approved
  
  Testing: Accelerated Light Aging Test – 1000 Hours
- Window Glass
  
  Specification: 96g DOT Approved Pressed flexible vinyl, undistorted, won’t shrink or yellow
  
  Testing: CFFA, FMVSS & SAE Requirements
- Zippers
  
  Specification: Reinforced nylon self-correcting zippers
  
  Testing: 50,000 Cycle Test – No bind or drag
- Velcro
  
  Specification: Industrial Grade Fiber
  
  Testing: 150 kg (330 lbs.) per square inch
- Seams
  
  Specification: 135-gauge thread with heat sealed seams, 4-piece thread per inch
  
  Testing: CFFA, FMVSS & SAE Requirements
- Belt Rails
  
  Specification: Polyethylene and Anti Cracking
  
  Testing: CFFA, FMVSS & SAE Requirements
Rated 5.00 out of 5
(8 reviews)
$379.99 Add to cart
Performance Upgrades - JL Wrangler
Wrangler JL Hitch Class 3 2-Inch Receiver | Curt 13392
- Suits Jeep Wrangler JL 2018-2023 2-door and 4-door (does not suit Diesel)
- Not suitable to be used with the factory wiring harness (it’s in the way)
- Considerably less expensive than the OEM option
- Rated to 3,500 lbs. gross trailer weight and 350 lbs. tongue weight
- Compatible with weight distribution hitch (4,000 lbs. WD / 400 lbs. WDTW)
- Engineered with a vehicle-specific design for a custom fit
- Concealed main body for OE look and seamless integration with the vehicle
- Tested for safety in accordance with SAE J684
- Precisely welded for superior strength and fit
- Protected by a durable high-gloss black powder coat finish
- Co-cured in a rust-resistant liquid A-coat, inside and out
- Equipped with an open-back receiver for easy cleaning
- Limited lifetime warranty (one-year finish, one-year parts)
- Made in USA (may include imported hardware)
- Installation Guide
Rated 5.00 out of 5
(7 reviews)
$129.95 Add to cart
Sequoia 1st Gen (2001-2007)
FREE SHIPPING
within 48 US States
Dobinsons 3-Way Adjustable MRA 0-2.5″ Sequoia Lift Kit | 2001-2007
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- 3-way adjustable valving – adjust high and low speed compression and rebound
- Massive 56mm (2.2″) Outer body with 50mm (1.97″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Universal Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- The included droop spacer goes on top of the strut, under the first washer, if lifting more than 2.0″ (see attached photo)
- Additional optional parts can be added from the drop down menus
Rated 5.00 out of 5
(6 reviews)
From $3,170.00 Select options
Performance Upgrades - JL Wrangler
FREE SHIPPING
within 48 US States
Z Automotive Jeep Wrangler JL Front Camera
- Grille mounted camera for Jeep Wrangler JL except 4XE and 392 (see JT Camera Kit)
- Attaches to the front grille neatly and discretely as shown in the photo
- Requires a Tazer JL or Tazer JL Mini to activate the “cargo camera” input on your screen
- Works on the 8.4 Uconnect only
- If the Tazer JL / Mini is present, this camera input can be activated at any time, in any drive mode, and at any speed, as long as you want
- It makes a perfect trail camera as well as for parking.
- This is a high-quality standard definition (480i) camera
- Download Instructions
Rated 5.00 out of 5
(7 reviews)
$179.95 Add to cart
Late FJ Cruiser (2010-2016)
FREE SHIPPING
within 48 US States
Dobinsons 2-3.5″ Extended Travel Pre-Assembled IMS Coilovers for FJ Cruiser 2010+
- Suits 2010-2017 Toyota FJ Cruiser 4×4 Models
- Looking for a quick and easy way to lift your FJ Cruiser? This is your answer
- A 4×2 model lifts 1″ extra with the 4×4 lift heights
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- Extended Travel – 575mm fully extended, 430mm compressed
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- To run these Extended Travel coilovers, new UCA’s need to be added for proper articulation and correct wheel alignment. A diff drop kit is also recommended to minimize CV binding at full droop
- Click to see Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
Rated 5.00 out of 5
(5 reviews)
$1,199.00 Select options
Late FJ Cruiser (2010-2016)
FREE SHIPPING
within 48 US States
Dobinsons 1.5-2.5″ Pre-Assembled IMS Coilovers for FJ Cruiser 2010+
- Suits 2010-2017 Toyota FJ Cruiser 4×4 Models
- Looking for a quick and easy way to lift your FJ Cruiser? This is your answer
- A 4×2 model lifts 1″ extra with the 4×4 lift heights
- Select your desired lift height and spring rate – we’ll take care of the rest!!
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled to the selected height with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- 560mm extended, 420mm compressed
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- Note about lift heights – all vehicles can have some variance and desired lift height may need to be adjusted to suit your specific vehicle. Adding 2.5″ or more lift, new UCA’s should be added for proper articulation and correct wheel alignment
- Click to see Matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
Rated 5.00 out of 5
(5 reviews)
$1,199.00 Select options
Bronco (2021-2025+)
FREE SHIPPING
within 48 US States
Dobinsons Rear Adjustable Panhard Rod for Ford Bronco 2021+
- Suits Ford Bronco 2021-2025+ (not sport models)
- Replaces OE Rear Panhard Rod, adjustable to suit lift height
- Zinc plated steel then E-coated with all hardware and high quality rubber bushes supplied
- Off-car adjustable, cannot be set while fully installed
- For 0-4″ of lift
- Rubber Bushes offer greater flexibility than polyurethane, providing maximum articulation
- Photo for illustration purposes
Rated 5.00 out of 5
(3 reviews)
$330.00 Add to cart
Limit Straps
Trail-Gear Limit Strap Clevis Kit
- Super Metal Chromoly Steel which exceeds Grade 8 specifications and are zinc-plated to prevent corrosion
- The clevis shank is fully threaded for easy adjustment
- The Clevis is provided with zinc-plated steel spring to accommodate for change in limit strap length due to stretching
- The bushings are stainless steel
- All mounting hardware is Grade 8 and zinc-plated
- Sold individually. Buy 2 if you have 2 straps
- To see Limit Strap Options, Click Here
Rated 5.00 out of 5
(9 reviews)
$44.95 Add to cart
Trail-Gear
Trail-Gear Rock Assault 6-Ply Limit Strap (8″-40″ Lengths)
- Multiple lengths available, from 8″ to 40″
- SOLD INDIVIDUALLY
- 6-layer, 1.75” nylon webbing limit straps
- 3/16″ thick heat-treated 4130 Chromoly Steel zinc-plated buckles with 1/2″ mounting hole
- Made from 9,000 lb. test nylon straps
- Anti-abrasion clips have been installed in each buckle to minimize wear
- Strap lengths are measured from the center of the mounting holes and are guaranteed accurate to +/- 1/4”
- When selecting, choose a limit strap that is 1” shorter than the shock to prevent full extension and possible breakage of shock.
- Requires custom mounting and does not come with any hardware or mounts
- One mounting option is the with the Limit Strap Clevis Kit
Rated 5.00 out of 5
(9 reviews)
$49.00 Select options
Pathfinder R51 (2005-2012)
FREE SHIPPING
within 48 US States
Dobinsons 1.5″ Lift IMS Coilovers for Nissan Pathfinder R51
- Suits 2005-2012 Nissan Pathfinder R51 4×4 Models – Lifts 1.5″ over stock
- Looking for a quick and easy way to lift your Pathfinder? This is your answer
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
- Instructions for setting coil seat height
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
Rated 5.00 out of 5
(6 reviews)
From $1,190.00 Select options
Bronco (2021-2025+)
FREE SHIPPING
within 48 US States
Dobinsons Billet Aluminum Ford Bronco UCA Pair | Bronco 2021+
- Suits Ford Bronco 2021+ (full size Bronco)
- Super strong billet aluminum front upper control arms (UCA’s)
- Arms for both left and right hand side
- Preassembled with Mevotech TTX Extreme Duty Ball Joints
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- Completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
(0 reviews)
$1,195.00 Add to cart
Sequoia 3rd Gen (2023-2025+)
Dobinsons Front Coil Spring Options | Toyota Sequoia 2023+ – Pair
- Suits Toyota Sequoia 2023-2025+, choose the appropriate lift height that also matches any added weight you’ve put on the truck
- A 2023+ Sequoia came with a front ride height 1″ lower than a 2022+ Tundra, so we’re able to offer a 4″ lift on these, which is a 3″ on a Tundra, and still within the limits of the IFS
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
Rated 5.00 out of 5
(17 reviews)
From $305.00 Select options
Snorkel
FREE SHIPPING
within 48 US States
Safari Snorkel for Toyota FJ Cruiser Snorkel 2010-2016
- Suits Toyota FJ Cruiser 2010-2016
- Safari V-Spec Snorkel
- Relocates Your Engine’s Air Intake Point to a Higher Location
- Crosslinked Polyethylene Construction
- Built to Perform in Extreme Weather Conditions
- Comes With Stainless Steel and Plated Hardware
- Bolt-On Installation; Drilling Is Required
- Supported by a 2-Year Warranty
- Fully Designed and Manufactured in Australia
- Designed and manufactured in Australia
- Requires cutting and drilling of the fender and A-pillar. Full instructions and template provided.
Rated 5.00 out of 5
(20 reviews)
$546.00 Add to cart
Safari Snorkel
Safari Snorkel SS1080HF for Jeep Gladiator and JL Wrangler
- Suits Jeep Wrangler JL and Gladiator JT with the 2.0L or 3.6L gas engines. Does not suit diesel or any other variant
- Relocates Air Intake Above Windshield
- Reinforces Performance in Extreme Conditions
- Crafted from Tough and Lightweight, UV Protected Polyethylene
- Connection Ducts Made of EPDM Molded Rubber
- With High-Flow Air Duct
- Uses High-Grade Stainless Steel Hardware
- CAD-Engineered for a Precise Fit
- Installation Requires Modifications
- Requires cutting and drilling of the exterior body parts (hood)
- Ties into Factory Air Box
- Carries a 3-Year Limited Warranty
- Made in Australia
Rated 5.00 out of 5
(24 reviews)
$680.00 Add to cart
Full Suspension Kits - Sequoia 2nd Gen
FREE SHIPPING
within 48 US States
3″F / 2″R SST Lift Kit – Toyota Sequoia 2008-2022
- Safely lift your 2008-22 Toyota Sequoia 3 Inches front and 2″ rear
- Fits 2WD and 4WD
- Works only in conjunction with stock suspension
- Allows for up to a 35×12.50 tire
- Retains factory steering radius
- Includes important front differential drop kit
- Includes limited lifetime warranty
- *Not for use on vehicles with adjustable rear suspension or TRD Pro models
- Installation Instructions
Rated 5.00 out of 5
(12 reviews)
$499.95 Add to cart
Sale!
Late FJ Cruiser (2010-2016)
RCI 2010+ FJ Cruiser Engine Skid Plate
- Fits Toyota FJ Cruiser 2010-2017 models
- Includes front skid plate ONLY
- Protects front two cross-members, low hanging front differential, oil pan, transmission, second and third cross-members, exhaust cross pipe, and transfer-case
- Excellent addition or replacement of weak, lightweight OEM skid plates
- Simple installation and removal of all subsections for maintenance
- Built in oil drain holes allow easy access and ability to change oil without removal of plate
- Engine skid plates come standard with center mounting posts for substantially increased strength
- Engine skid plate includes differential drop cage for maximum security and ground clearance, PLUS this feature allows the use of differential drop kits without having to space the skid plate down
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Smooth, flat surface that easily slides over obstacles
- Black powder coat finish is standard on steel skid plates for a rust resistant, durable and high quality finish, optional on aluminum
- Installs in minutes
- Grade 8 hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA
Rated 5.00 out of 5
(3 reviews)
Original price was: $349.99.Current price is: $315.00. Select options
Sale!
4Runner 4th Gen (2003-2009)
RCI 4th and 5th Gen 4Runner + FJ Cruiser V6 Transmission Skid Plate 2003-2024
- Fits Toyota 4Runner V6 Models 2003-2009 and 2010-2024, and FJ Cruiser (all years)
- Protects transmission, second and third cross-members, and exhaust
- Excellent addition or replacement of weak, lightweight OEM skid plates (which do not provide any coverage over transmission)
- Service openings for maintenance without removal
- Reinforced edges between cross-members for maximum strength and rigidity
- Bolt protector rings surround exposed bolts, shielding against physical damage
- Built in drainage holes, which also help prevent suction of skid plates in mud and snow
- Smooth, flat surface that easily slides over obstacles
- Black powder coat available for rust resistant, durable and high quality finish
- Installs in minutes
- All hardware and installation instructions provided
- Direct bolt on addition to existing factory attachment points, no drilling required
- Made in the USA
Rated 5.00 out of 5
(3 reviews)
Original price was: $209.99.Current price is: $189.00. Select options
Tundra 3rd Gen (2022-2025+)
FREE SHIPPING
within 48 US States
Air Lift LoadLifter 5000 Airbag Kit for Toyota Tundra 2022-2025+
- Made specifically for the 2022-2025+ Toyota Tundra
- Suits 2WD and 4×4 Models
- Up to 5,000 lbs. of leveling capacity
- Air Springs fully adjustable from 5-100 PSI for precise control
- Levels your vehicle when towing or hauling for a safe, comfortable ride.
- Eliminates sag and bottoming out
- Easy to install with included instructions
- No frame drilling required
- Installs on the outside of the coils (not inside)
- Features Air Lift’s Limited Lifetime Warranty and 60 Day Ride Satisfaction Guarantee
- Does not fit with 5th wheel hitches or vehicles equipped with factory air suspension
- Intended for stock ride height trucks and not those that are lifted
- Installation Guide
Rated 5.00 out of 5
(3 reviews)
$544.00 Add to cart
200 Series Land Cruiser ARMORED
Dobinsons C59-562 B6 500KG Armored Land Cruiser 200 Series Front Coils – Pair
- C59-562 – Front Coils for Level B6 Armor with 500KG of additional weight over stock – 200 Series Land Cruiser
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish.
- Sold as a Pair – marked side specific for installation
Rated 5.00 out of 5
(4 reviews)
$305.00 Add to cart
200 Series Land Cruiser ARMORED
Dobinsons C59-565 B7 900-1100KG Armored Land Cruiser 200 Series Rear Coils – Pair
- C59-565 – Level B7 Armor with 900-1100KG of additional weight over stock – 200 Series Land Cruiser
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish.
- Sold as a Pair – marked side specific for installation
Rated 5.00 out of 5
(4 reviews)
$405.00 Add to cart
200 Series Land Cruiser ARMORED
Dobinsons C59-563 B6 650KG Armored Land Cruiser 200 Series Rear Coils – Pair
- C59-563 – Level B6 Armor with 650KG of additional weight over stock – 200 Series Land Cruiser
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish.
- Sold as a Pair – marked side specific for installation
Rated 5.00 out of 5
(1 review)
$305.00 Add to cart
Dobinsons
Dobinsons Extended JL Rear Sway Bar Link Kit | Jeep Wrangler JL
- Fits Jeep Gladiator JT 2018+ and Jeep Wrangler JL 2018+ 2-door and 4-door
- Recommended for a Jeep with 2″ of lift
- Required for a Jeep with 3″ of lift
- Heavy Duty design with high quality ball joint ends for long life
- Fits and installs the same as OEM, but with added length so that the stock sway bar still functions normally at a lifted height without reducing wheel travel
- Sold as a pair, enough for 1 vehicle
Rated 5.00 out of 5
(5 reviews)
$90.00 Add to cart
On Backorder
WK Grand Cherokee (2005-2010)
Dobinsons C21-020 Front Coil Springs | Jeep Commander 2006-10 and Grand Cherokee WK 2005-10 – Pair
- Dobinsons C21-020 suit the Jeep Grand Cherokee WK with with 3.0L TDI, 3.7L V6, 4.7L V8 Engine from 2005 to 2010 and also the Jeep Commander from 2006 to 2010, and they give 1.75″ of lift.
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
Rated 5.00 out of 5
(2 reviews)
$270.00 Add to cart