Your cart is currently empty!
Dobinsons Spring & Suspension
Showing 1021–1050 of 1057 resultsSorted by popularity
-
Explorer U502 AWD 2012+FREE SHIPPING
within 48 US StatesDobinsons Front Struts Pair | Ford Explorer U502 AWD 2012+ 3.5L 3.7L
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Sold in Pairs, one for the left side and one for the right side
- Specifications: 588mm extended, 393mm compressed
(9 reviews) -
Hilux Revo (2016+)FREE SHIPPING
within 48 US StatesDobinsons 4×4 Snorkel Kit for Toyota Hilux Revo 2016+ 2.8L TDI Diesel
- Suits the wide body models only!!
- Made for the 2.8L TDI Diesel engine
- Rotationally molded using precision CNC shaped aluminum dies
- Increases air intake height to allow safer water crossings and reduce dust intake
- Increased air intake height rams cooler, cleaner air into the engine increasing engine performance
- Manufactured from high quality UV resistant LLDPE
- Snorkel Kits include template and all mounting hardware
(9 reviews) -
80 Series Land Cruiser (1990-1997)
Dobinsons C59-317 Rear Coil Springs | Land Cruiser 80 Series – Pair
- Suits Land Cruiser 80 Series and Lexus LX450
- C59-317 6″ lift with stock weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- 560/570mm free height, 21mm wire, 303LBF/in rate
- Sold in Pairs
(17 reviews) -
Bump Stops + Spacers
Dobinsons Hydro Bump Weld On Mounting Cans 2.6″ 66mm (Pair)
- Dobinsons threaded weld-on cans (pair) for 2.6″ / 66mm body Hydro Bumps
- Threaded weld can
- Zinc coating for rust prevention (Must be ground off before welding)
- 3mm walls for increased strength
- Sold in Pairs
(5 reviews) -
Bump Stops + Spacers
Dobinsons Hydro Bump Weld On Mounting Cans 2.2″ 56mm (Pair)
- Dobinsons threaded weld-on cans (pair) for 2.2″ / 56mm body Hydro Bumps
- Threaded weld can
- Zinc coating for rust prevention (Must be ground off before welding)
- 3mm walls for increased strength
- Sold in Pairs
(10 reviews) -
Bump Stops + SpacersFREE SHIPPING
within 48 US StatesDobinsons Hydro 2.6″ Bump Stops – 66mm body x 85mm stroke (Pair)
- Dobinsons HBS66-003 – 66mm body x 85mm stroke (Pair) – for 4-6″ lift heights
- CNC Machined 60mm Billet Aluminum Piston
- EDP Coated 3mm Thick 66mm Steel Body
- Threaded Body For Height Adjustment
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 66mm body x 85mm stroke
- 40mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 150 PSI
- Extra Short Dead Lengths For Compact Fitment
- No mounting cans or mounting fit kit is included (sold separately)
(5 reviews) -
Bump Stops + SpacersFREE SHIPPING
within 48 US StatesDobinsons Hydro 2.6″ Bump Stops – 66mm body x 57mm stroke (Pair)
- HBS66-002 – 66mm body x 57mm stroke (Pair) – for 0-4″ lift heights
- CNC Machined 60mm Billet Aluminum Piston
- EDP Coated 3mm Thick 66mm Steel Body
- Threaded Body For Height Adjustment
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 66mm body x 57mm stroke
- 40mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 150 PSI
- Extra Short Dead Lengths For Compact Fitment
- No mounting cans or mounting fit kit is included (sold separately)
(10 reviews) -
Bump Stops + SpacersFREE SHIPPING
within 48 US StatesDobinsons Hydro 2.2″ Bump Stops – 56mm body x 50mm stroke (Pair)
- HBS56-001 – 56mm body x 50mm stroke (Pair) – for 0-4″ lift heights
- CNC Machined 50mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56mm Steel Body
- Threaded Body For Height Adjustment
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- 56mm body x 50mm stroke
- 30mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Pre-charged to 150 PSI
- Extra Short Dead Lengths For Compact Fitment
- No mounting cans or mounting fit kit is included (sold separately)
(6 reviews) -
Bump Stops + SpacersFREE SHIPPING
within 48 US StatesDobinsons Hydraulic Bump Stops | 3 Sizes
- CNC Machined 50/60mm Billet Aluminum Piston
- EDP Coated 3mm Thick 56/66mm Steel Body
- Threaded Body For Height Adjustment
- Supplied with both Interchangeable Super Quiet Rubber Rod End & Hard Nylon
- Available in 3 sizes: 56mm body x 50mm stroke, 66mm body x 57mm stroke & 66mm body x 85mm stroke
- 30/40mm Micro Polished Hard Chrome Shaft
- Slow Rebound Valving To Prevent Bucking
- Removable Dust Cover Boot For Stealth Appearance
- Fully Rebuildable & Tunable
- O-Ring Travel Indicator
- Heavy Duty Extreme-Race style Triple Seal Design
- Nitrogen Gas Charged & Tunable (100 to 300 PSI)
- Extra Short Dead Lengths For Compact Fitment
(8 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons GS29-727 Pair Rear Shocks | Jeep Grand Cherokee WK 2005-2010 Commander 2006+
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS29-727 specifications: 630mm extended, 395mm compressed
(9 reviews) -
Armor
Dobinsons Front Deluxe Winch Bumper | Toyota Land Cruiser 200 Series 10/2015-2021
- Suits 10/2015-2021 Toyota Land Cruiser 200 Series and Lexus LX570
- Airbag and winch compatible, Driving Light Mounts, Heavy Duty Black Powder Coat Finish
- 3mm Thick Main Body, 4mm + 5mm Thick Bracket, 1.6mm Bash Plates, 51-76mm top tubes depending on vehicle
- Includes Turn Signals and all Required Hardware for Installation
- Separate Winch Cradle System, making installation faster
- Supplied Black, but can be painted by your paint shop. Suits 12000 LB Low Mount Winches
- We offer a large variety of Winches as well
- Ships to the nearest freight terminal on a pallet for you to pick up, unless you add home delivery. We will be in touch with that delivery address
(6 reviews) -
Coil Springs
Dobinsons C59-424 Front 1″ Coil Springs for Toyota Rav4 2006 to 2011 4Cyl – Pair
- Suits Toyota Rav4 from 2006 to 2011, ACA33 model with the 4 cylinder engine.
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Photo is not of actual coil spring pair
(18 reviews) -
Coil Springs
Dobinsons C59-425 Rear 1″ Coil Springs for Toyota Rav4 2006 to 2011 4Cyl – Pair
- Suits Toyota Rav4 from 2006 to 2011, ACA33 model with the 4 cylinder engine.
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
- Photo is not of actual coil spring pair
(15 reviews) -
Tacoma 1st Gen (1996-2004)FREE SHIPPING
within 48 US StatesDobinsons Rear Shocks for Toyota Tacoma 1998 to 2004
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals
- Fuchs German shock absorber oil
- Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings
- Double Chrome hardened rods
- Metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Sold in Pairs
(9 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons GS29-425S Pair of Rear Shocks for Jeep XJ, Cherokee ZJ Grand Cherokee and TJ Wrangler
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS29-425S specifications: 542mm extended, 338mm compressed
(6 reviews) -
DobinsonsFREE SHIPPING
within 48 US StatesDobinsons GS29-420 Pair of Front Shocks for Jeep XJ, Cherokee ZJ Grand Cherokee and TJ Wrangler
- Nitrogen Gas Charged, low pressure gas, reducing reducing oil aeration (shock fade)
- Superior Design, thicker walls, longer travel
- Japanese NOK Multi-Lip seals, Fuchs German shock absorber oil, Natural Rubber Bushings for reduced noise vibration and flexibility
- Teflon Piston Rings, double Chrome hardened rods, metal shock boot to protect rod from damage
- Matched to compliment Dobinsons Complete Suspension Systems
- Dobinsons GS29-420 specification: 558mm extended, 335mm compressed
(6 reviews) -
Coil Springs
Dobinsons Rear Coil Springs for Jeep Wrangler TJ 1996-2007 3.0″ Lift Medium Load – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(17 reviews) -
Coil Springs
Dobinsons Front Coil Springs for Jeep Wrangler TJ 1996-2007 3.0″ Lift Medium Load – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(18 reviews) -
Awnings
Dobinsons Sensu 270° Wrap Around Awning – Driver Side
- 2.5M length (against vehicle), opens 270°, covering over 10m2
- Heavy Duty Waterproof, Breathable Ripstop 420D PU Oxford Polyester
- Mounts to Left Hand (US Driver’s) Side Only
- Complete with Fitting Instructions & Tools, Poles, Ropes & Pegs
- Quick, Simple Setup & Pack Up. Manually opens and closes (not automatic)
- Requires a roof rack or sturdy mounting system to attach awning to
(0 reviews) -
AccessoriesFREE SHIPPING
within 48 US StatesDobinsons 4×4 140 AMP Dual Battery Wiring Kit with LCD Voltage Monitor and Automatic Solenoid
- 13.3V cut in, 12.8V cut out, Ignition Protected
- Includes all hardware, 5m (15ft) cables
- Reversible LCD Display screen for upside down mounting, if desired
- Displays both battery readings simultaneously
- Suitable for 4×4’s, Trucks, Vans, Trailers
(8 reviews) -
Add-a-Leaf
Dobinsons 2″ Rear Lift Quick Ride Kit Toyota Tundra 2000 to 2021
- High Quality cast steel lift blocks/spacers, painted black
- Extended length u-bolts, zinc coated
- Fast and simple to install
- New extended length rear shocks are recommended – GS59-711
- Only to be used with OE height leaf springs
- Installation Instructions
(6 reviews) -
JK Wrangler (2007-2018)FREE SHIPPING
within 48 US StatesDobinsons MRR 2.6″ (66mm) Body Shock Absorber Set of 4 for Jeep JK 2007-2018
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- External Remote Oil Reservoir, 3mm Heavy Duty Wall Thickness
- Single Piece Lower Leg, Natural Rubber Bushings Top and Bottom
- Triple Lip Oil Seal
- Direct Bolt-on Design, Fully Rebuildable Design
- EDP Surface Protection
- Purchase includes 4 shocks – 2 fronts and 2 rears
(10 reviews) -
Dobinsons
Dobinsons Big Bore Steering Damper for Jeep Cherokee Wrangler Grand Cherokee, models XJ YJ TJ ZJ WJ JK
- Induction Hardened Rods for strength, no Viscosity Drop due to High Shear Stability
- Cellular Foam Cell Insert, Teflon Piston Rings
- Excellent Viscosity Temperature Performance
- NOK Triple Lip Oil Seals, High Quality Fuchs German Oil
- Replaces OE steering damper, bolts into place. Can be used with or without a lift.
(7 reviews) -
WK Grand Cherokee (2005-2010)
Dobinsons C29-027 Rear Coil Springs | Jeep Commander 2006-10 and Grand Cherokee WK 2005-10 (2″ Lift Med Load) – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(7 reviews) -
Honda
Dobinsons C23-194 Front Coil Springs for Honda CRV 2012-2016 35mm 1.5″ Lift – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(10 reviews) -
Coil Springs
Dobinsons C23-073 Rear Coil Springs for Honda CRV 1997-2001 30mm 1.25″ Lift – Pair
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
(3 reviews) -
Rooftop Tents
Dobinsons 4×4 Rooftop Tent Ladder Extension Piece – Adds 20 Inches
- Adds on to your existing roof top tent ladder to create a 7.5 FT long ladder
- Adds approximately 2 feet to your existing ladder – New holes need to be drilled in desired location
- Easy to Install/Uninstall from your existing ladder
- Fits into tent package on your roof top, does not come with any bag or cover
- Simple, effective, and necessary if your vehicle tent is mounted on a high roof
(7 reviews) -
Awnings
Dobinsons 4×4 Roll Out Awning 8FT x 9.8FT Large Size with LED Light
- Measures 2.5M (8FT) against the vehicle, extending out 3.0M (9.8FT) away from the vehicle.
- Heavy Duty Waterproof, Breathable Rip-stop 420D PU Oxford Polyester
- Could mount to left or right hand side of the vehicle
- Complete with Fitting Instructions & Tools, Poles, Ropes & Pegs
- Quick, Simple Setup & Pack Up. Manually opens and closes (not automatic)
- Includes LED Strip Light
(7 reviews) -
Awnings
Dobinsons 4×4 Mosquito Net Enclosure for Large Roll Out Awning 8.0FT x 9.8FT (2.5 x 3.0M)
- To suit Dobinsons CE80-3904 Large Awning specifically, but may also suit other brands of awnings measuring 2.5m x 3.0m
- Attaches Quickly and Easily to Dobinsons Roll Out Awnings
- Quick and Easy barrier to Mosquitoes and Bugs
- Does not include Floor. Clips and Snaps into position on Awning
- Quick, Simple Setup & Pack Up
(0 reviews) -
Awnings
Dobinsons 4×4 Mosquito Net Enclosure for Medium Roll Out Awning 6.5FT x 9.8FT (2.0 x 3.0M)
- To suit Dobinsons CE80-3937 medium Awning specifically, but may also suit other brands of awnings measuring 2.0m x 3.0m
- Attaches Quickly and Easily to Dobinsons Roll Out Awnings
- Quick and Easy barrier to Mosquitoes and Bugs
- Does not include Floor. Clips and Snaps into position on Awning
- Quick, Simple Setup & Pack Up
(0 reviews)
