Dobinsons Spring & Suspension

Showing 811–840 of 1041 resultsSorted by popularity

Frontier D21 D22 1985-2004
Dobinsons PB45-1068K Rear Polyurethane Leaf Spring Bush Kit
- Suits Nissan Navara and Frontier D21 and D22 1986-2004
- For any lift height, or no lift. These are OE replacement bushings.
- Use with Dobinsons Leaf Springs or any other brand that can accept OE-size bushings
- Pressing of OE bushings may be necessary during removal and installation
- Replaces OE bushings in all 6 positions of rear leaf springs
- Greasable bolts are sold in pairs, sold separately
Rated 5.00 out of 5
(6 reviews)
$100.00 Add to cart
Frontier D21 D22 1985-2004
Dobinsons SK45-052 Greasable Shackle Kit Pair for Nissan Frontier D21 D22
- Suits Nissan Navara and Frontier D21 and D22 1986-2004
- Greasable design
- Reduces friction in bushes, creating a more comfortable ride
- Heavy duty design and provide simple service through external grease nipples
- Sold as a pair to replace the original shackles
- Incredibly tough and durable gold zinc plating
- Photo is for illustration purposes
Rated 5.00 out of 5
(7 reviews)
$110.00 Add to cart
Frontier D21 D22 1985-2004
Dobinsons TB45-1446 Torsion Bar Pair for Nissan Frontier D22 1998-2004 892mm
- Suits Nissan Frontier and Navara D22 models from 1998-2004
- TB45-1446 measure 892mm in total length – check before ordering if you aren’t sure
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
- Photo for illustration purposes
Rated 5.00 out of 5
(8 reviews)
$325.00 Add to cart
Frontier D21 D22 1985-2004
Dobinsons TB45-1456 Torsion Bar Pair for Nissan Frontier D21 1986-1997 1202mm
- Suits Nissan Frontier and Navara D21 models from 1986 to 1997
- TB45-1456 measure 1202mm in total length – check before ordering if you aren’t sure
- Increased spring rate to improve handling and lift front end
- Powder coated black for a long lasting finish
- Replaces OE torsion bars without modification
- Torsion bars must be installed with 2/3 suspension down travel and 1/3 up travel to ensure a good ride
- Photo for illustration purposes
Rated 5.00 out of 5
(8 reviews)
$305.00 Add to cart
45 Series Land Cruiser - FJ45, HJ47, BJ45, BJ46 (post 8/1980)
Dobinsons Full Suspension Kit for Land Cruiser FJ45 HJ47 BJ45 BJ46 1980-1984
- For 1980-1984+ Model Toyota Land Cruiser FJ45 HJ47 BJ45 BJ46 with 35mm spring eye size front and rear
- Lifts 40mm (1.6″) Front and Rear
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Nitrogen Gas Charged Shocks, Superior Design, thicker walls, longer travel
- Make your selections below for how complete of a kit you would like to make
- No parts are included if you don’t select them
Rated 5.00 out of 5
(5 reviews)
From $1,560.00 Select options
45 Series Land Cruiser - FJ45, HJ47, BJ45, BJ46 (post 8/1980)
Dobinsons HJ47-8L-F Front Leaf Springs Pair for 1980+ FJ45 HJ47 BJ45 BJ46
- Suits 1980+ Toyota Land Cruiser FJ45 HJ47 BJ45 BJ46 models with 35mm eyes
- Gives 40mm lift with up to 90LBS constant weight on a FJ45 HJ47 BJ45 BJ46
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair – bushings, u-bolts and all other parts sold separately
- Photo for illustration purposes only
Rated 5.00 out of 5
(4 reviews)
$470.00 Add to cart
45 Series Land Cruiser - FJ45, HJ47, BJ45, BJ46 (post 8/1980)
Dobinsons Heavy Load Rear Leaf Springs Pair for 1980+ Land Cruiser 45 46 47 Series
- Suits 1980-1984 Toyota Land Cruiser FJ45, HJ47, BJ45, BJ46 with 35mm spring eyes
- Gives 40mm of lift with up to 440LBS+ constant rear end constant weight added
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair (1 left and 1 right side) – bushings, u-bolts and all other parts sold separately
- Photo for illustration purposes only
Rated 5.00 out of 5
(5 reviews)
$860.00 Add to cart
45 Series Land Cruiser - FJ45, HJ47, BJ45, BJ46 (post 8/1980)
Dobinsons Medium Load Rear Leaf Springs Pair for 1980+ Land Cruiser 45 46 47 Series
- Suits 1980-1984 Toyota Land Cruiser FJ45, HJ47, BJ45, BJ46 with 35mm spring eyes
- Gives 40mm of lift with up to 220LBS+ constant rear end weight
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
- Sold as a pair (1 left and 1 right side) – bushings, u-bolts and all other parts sold separately
- Photo for illustration purposes only
Rated 5.00 out of 5
(5 reviews)
$760.00 Add to cart
Struts + Shocks - Tundra 2022+
FREE SHIPPING
within 48 US States
Dobinsons IMS Shock Kit for Tundra 2022-2024
- Dobinsons IMS Monotube Strut and Shock Absorber Kit – Front and Rear
- Suits 2022-2024 Toyota Tundra
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Height Adjustable: Yes, fronts
- Suits 0-3″ front lift and 1-3″ rear lift
- Reservoir: Internal
- Finish: Corrosion resistant (EDP Surface Protection)
- Body Design: 66mm (2.6″) OD
- Rod: Double Chrome 22mm front, 18mm rear
- Piston: Race inspired hi-flow CNC 6061 Billet alloy
- Oil: High Quality Fuch’s Oil from Germany
- Seals: Heavy Duty 3 Stage FKM HNBR Sealing System
- Rings: Teflon Piston Rings
- Bushings: Natural Rubber
- Internal Design: IFP (Internal Floating Piston) Monotube
- Boot Included: Yes
- Bushings Included: Yes, top and bottom, front and rear
- IMS59-60446 specs – 540mm extended, 390mm compressed
- IMS59-60887 and IMS59-60687 specs – 680mm extended, 421mm compressed
- Reuse original coil springs or buy new Dobinsons springs
- Not suitable with TRD Pro coil springs
- Full 2 year limited warranty, no set rebuild time period
- Photos for illustration purposes
Rated 5.00 out of 5
(13 reviews)
From $1,230.00 Select options
Shocks + Struts - 5th Gen 4Runner
FREE SHIPPING
within 48 US States
Dobinsons IMS Shock Kit for 5th Gen Toyota 4Runner
- Dobinsons IMS Monotube Strut and Shock Absorber Kit – Front and Rear
- Suits 2010-2024 Toyota 4Runner 5th Gen
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Height Adjustable: Yes, fronts
- Reservoir: Internal
- Finish: Corrosion resistant (EDP Surface Protection)
- Body Design: 56mm OD
- Rod: Double Chrome 18mm
- Piston: Race inspired hi-flow CNC 6061 Billet alloy
- Oil: High Quality Fuch’s Oil from Germany
- Seals: Heavy Duty 3 Stage FKM HNBR Sealing System
- Rings: Teflon Piston Rings
- Bushings: Natural Rubber
- Internal Design: IFP (Internal Floating Piston) Monotube
- Boot Included: Yes
- Bushings Included: Yes, top and bottom, front and rear
- IMS59-50700 specs – 560mm extended, 420mm compressed
- IMS59-50701 specs – 598mm extended, 389mm compressed
- Reuse original coil springs or buy new Dobinsons springs
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(13 reviews)
From $1,230.00 Select options
Struts + Shocks - FJ Cruiser Late
FREE SHIPPING
within 48 US States
Dobinsons IMS Shock Kit for FJ Cruiser 2010+
- Dobinsons IMS Monotube Strut and Shock Absorber Kit – Front and Rear
- Suits 2010-2016 Toyota FJ Cruiser
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Height Adjustable: Yes, fronts
- Reservoir: Internal
- Finish: Corrosion resistant (EDP Surface Protection)
- Body Design: 56mm OD
- Rod: Double Chrome 18mm
- Piston: Race inspired hi-flow CNC 6061 Billet alloy
- Oil: High Quality Fuch’s Oil from Germany
- Seals: Heavy Duty 3 Stage FKM HNBR Sealing System
- Rings: Teflon Piston Rings
- Bushings: Natural Rubber
- Internal Design: IFP (Internal Floating Piston) Monotube
- Boot Included: Yes
- Bushings Included: Yes, top and bottom, front and rear
- IMS59-50700 specs – 560mm extended, 420mm compressed
- IMS59-50701 specs – 598mm extended, 389mm compressed
- Reuse original coil springs or buy new Dobinsons springs
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(13 reviews)
From $1,230.00 Select options
Shocks + Struts - Lexus GX460
FREE SHIPPING
within 48 US States
Dobinsons IMS Shock Kit for Lexus GX460
- Dobinsons IMS Monotube Strut and Shock Absorber Kit – Front and Rear
- Suits 2010-2023 Lexus GX460
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Height Adjustable: Yes, fronts
- Reservoir: Internal
- Finish: Corrosion resistant (EDP Surface Protection)
- Body Design: 56mm OD
- Rod: Double Chrome 18mm
- Piston: Race inspired hi-flow CNC 6061 Billet alloy
- Oil: High Quality Fuch’s Oil from Germany
- Seals: Heavy Duty 3 Stage FKM HNBR Sealing System
- Rings: Teflon Piston Rings
- Bushings: Natural Rubber
- Internal Design: IFP (Internal Floating Piston) Monotube
- Boot Included: Yes
- Bushings Included: Yes, top and bottom, front and rear
- IMS59-50700 specs – 560mm extended, 420mm compressed
- IMS59-50701 specs – 598mm extended, 389mm compressed
- Reuse original coil springs or buy new Dobinsons springs
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(13 reviews)
From $1,230.00 Select options
Shocks + Struts - Lexus GX470
FREE SHIPPING
within 48 US States
Dobinsons IMS Shock Kit for Lexus GX470
- Dobinsons IMS Monotube Strut and Shock Absorber Kit – Front and Rear
- Suits 2003-2009 Lexus GX470
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Height Adjustable: Yes, fronts
- Reservoir: Internal
- Finish: Corrosion resistant (EDP Surface Protection)
- Body Design: 56mm OD
- Rod: Double Chrome 18mm
- Piston: Race inspired hi-flow CNC 6061 Billet alloy
- Oil: High Quality Fuch’s Oil from Germany
- Seals: Heavy Duty 3 Stage FKM HNBR Sealing System
- Rings: Teflon Piston Rings
- Bushings: Natural Rubber
- Internal Design: IFP (Internal Floating Piston) Monotube
- Boot Included: Yes
- Bushings Included: Yes, top and bottom, front and rear
- IMS59-50220 specs – 567mm extended, 417mm compressed
- IMS59-50701 specs – 598mm extended, 389mm compressed
- Reuse original coil springs or buy new Dobinsons springs
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(13 reviews)
From $1,230.00 Select options
Shocks + Struts - 4th Gen 4Runner
FREE SHIPPING
within 48 US States
Dobinsons IMS Shock Kit for 4th Gen 4Runner 2003-2009
- Dobinsons IMS Monotube Strut and Shock Absorber Kit – Front and Rear
- Suits 2003-2009 Toyota 4Runner
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Height Adjustable: Yes, fronts
- Reservoir: Internal
- Finish: Corrosion resistant (EDP Surface Protection)
- Body Design: 56mm OD
- Rod: Double Chrome 18mm
- Piston: Race inspired hi-flow CNC 6061 Billet alloy
- Oil: High Quality Fuch’s Oil from Germany
- Seals: Heavy Duty 3 Stage FKM HNBR Sealing System
- Rings: Teflon Piston Rings
- Bushings: Natural Rubber
- Internal Design: IFP (Internal Floating Piston) Monotube
- Boot Included: Yes
- Bushings Included: Yes, top and bottom, front and rear
- IMS59-50220 specs – 567mm extended, 417mm compressed
- IMS59-50701 specs – 598mm extended, 389mm compressed
- Reuse original coil springs or buy new Dobinsons springs
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(13 reviews)
From $1,230.00 Select options
Struts + Shocks - FJ Cruiser Early
FREE SHIPPING
within 48 US States
Dobinsons IMS Shock Kit for FJ Cruiser 2006-2009
- Dobinsons IMS Monotube Strut and Shock Absorber Kit – Front and Rear
- Suits 2006-2009 Toyota FJ Cruiser
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Height Adjustable: Yes, fronts
- Reservoir: Internal
- Finish: Corrosion resistant (EDP Surface Protection)
- Body Design: 56mm OD
- Rod: Double Chrome 18mm
- Piston: Race inspired hi-flow CNC 6061 Billet alloy
- Oil: High Quality Fuch’s Oil from Germany
- Seals: Heavy Duty 3 Stage FKM HNBR Sealing System
- Rings: Teflon Piston Rings
- Bushings: Natural Rubber
- Internal Design: IFP (Internal Floating Piston) Monotube
- Boot Included: Yes
- Bushings Included: Yes, top and bottom, front and rear
- IMS59-50220 specs – 567mm extended, 417mm compressed
- IMS59-50701 specs – 598mm extended, 389mm compressed
- Reuse original coil springs or buy new Dobinsons springs
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(13 reviews)
From $1,230.00 Select options
Shocks + Struts - Tacoma 3rd Gen
FREE SHIPPING
within 48 US States
Dobinsons IMS Shock Kit for Tacoma 2005-2023
- Dobinsons IMS Monotube Strut and Shock Absorber Kit – Front and Rear
- Suits 2005-2023 Toyota Tacoma’s
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Height Adjustable: Yes, fronts
- Reservoir: Internal
- Finish: Corrosion resistant (EDP Surface Protection)
- Body Design: 56mm OD
- Rod: Double Chrome 18mm
- Piston: Race inspired hi-flow CNC 6061 Billet alloy
- Oil: High Quality Fuch’s Oil from Germany
- Seals: Heavy Duty 3 Stage FKM HNBR Sealing System
- Rings: Teflon Piston Rings
- Bushings: Natural Rubber
- Internal Design: IFP (Internal Floating Piston) Monotube
- Boot Included: Yes
- Bushings Included: Yes, top and bottom, front and rear
- IMS59-50220 specs – 22.3″ extended, 16.4″ compressed
- IMS59-50940 specs – 24.2″ extended, 14.2″ compressed
- Reuse original coil springs or buy new Dobinsons springs
- Full 2 year limited warranty, no set rebuild time period
Rated 5.00 out of 5
(13 reviews)
From $1,230.00 Select options
Shocks + Struts - 3rd Gen 4Runner
FREE SHIPPING
within 48 US States
Dobinsons IMS Shock Kit for 3rd Gen 4Runners + Prado 90
- Dobinsons IMS Monotube Strut and Shock Absorber Kit – Front and Rear
- Suits 1996-2002 Toyota 4Runner
- Suits Toyota Land Cruiser Prado 90 and 95 Models RZJ90, VZJ90, KZJ90, KDJ90, RZJ95, VZJ95, KZJ95, KDJ95
- Suitable for 0-2.5″ of lift
- Complete kit of 2 Front Struts and 2 Rear Shocks
- Height Adjustable: Yes, fronts
- Reservoir: Internal
- Finish: Corrosion resistant (EDP Surface Protection)
- Body Design: 56mm OD
- Rod: Double Chrome 18mm
- Piston: Race inspired hi-flow CNC 6061 Billet alloy
- Oil: High Quality Fuch’s Oil from Germany
- Seals: Heavy Duty 3 Stage FKM HNBR Sealing System
- Rings: Teflon Piston Rings
- Bushings: Natural Rubber
- Internal Design: IFP (Internal Floating Piston) Monotube
- Boot Included: Yes
- Bushings Included: Yes, top and bottom, front and rear
- IMS59-50222 specs – 473mm extended, 335mm compressed lengths
- IMS59-50225 specs – 530mm extended, 344mm compressed lengths
- Reuse original coil springs or buy new Dobinsons springs
- Note: Anyone lifting over 2″ shock install the included droop spacer, as pictured, and run a diff drop kit and UCA’s
Rated 5.00 out of 5
(13 reviews)
From $1,230.00 Select options
Dobinsons
Dobinsons WA59-512K 2.5° Front Poly Caster Bushing Kit | Land Cruiser LJ70 LJ73 RJ70 RJ73
- For 11/84 to 12/89 Toyota 70 Series Bundera models, LJ70, LJ73, RJ70 and RJ73 with Round Headlights
  
  For 0″ to 2.5″ of lift, Recommended when replacing 20+ year old suspension parts
  
  Contains all 4 bushings for the front of the radius arm to axle
  
  Complete with steel inner sleeve
  
  This kit is a must for any lifted Landcruiser so that the steering control is correct giving you the best ride quality possible
  
  Photo for illustration purposes
Rated 5.00 out of 5
(9 reviews)
$360.00 Add to cart
Bundera LJ70/LJ73 - 84-89 - Round Headlights
Dobinsons C59-405 Rear Coils for Toyota Land Cruiser Bundera 70 Series 11/84-12/89
- For 11/84 to 12/89 Toyota 70 Series Bundera models, LJ70, LJ73, RJ70 and RJ73 with Round Headlights
- These lift 2.5″ with 220LBS of constant added weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
Rated 5.00 out of 5
(20 reviews)
$270.00 Add to cart
Bundera LJ70/LJ73 - 84-89 - Round Headlights
Dobinsons C59-083 Rear Coils for Toyota Land Cruiser Bundera 70 Series 11/84-12/89
- For 11/84 to 12/89 Toyota 70 Series Bundera models, LJ70, LJ73, RJ70 and RJ73 with Round Headlights
- These lift 2″ with up to 220LBS of constant added weight, or 2.5″ with stock weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
Rated 5.00 out of 5
(10 reviews)
$270.00 Add to cart
Bundera LJ70/LJ73 - 84-89 - Round Headlights
Dobinsons C59-404 Front Coils for Toyota Land Cruiser Bundera 70 Series 11/84-12/89
- For 11/84 to 12/89 Toyota 70 Series Bundera models, LJ70, LJ73, RJ70 and RJ73 with Round Headlights
- These lift 2.5″ with the added weight of a bumper and winch, of 110-220lbs added constant weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
Rated 5.00 out of 5
(15 reviews)
$270.00 Add to cart
Bundera LJ70/LJ73 - 84-89 - Round Headlights
Dobinsons C59-082 Front Coils for Toyota Land Cruiser Bundera 70 Series 11/84-12/89
- For 11/84 to 12/89 Toyota 70 Series Bundera models, LJ70, LJ73, RJ70 and RJ73 with Round Headlights
- These lift 1.75″ with the added weight of a bumper and winch, of 110-220lbs added constant weight
- Fully Designed, Manufactured, and Finished In Australia
- Ultra modern design technology, Fully Scragged & Load Tested
- State of the Art Heat Treatment, High Intensity Shot Peened
- Formed on Precision Mandrels, Precise End Configurations
- Durable Powder Coat Finish
- Sold in Pairs
Rated 5.00 out of 5
(16 reviews)
$270.00 Add to cart
On Backorder
Dobinsons
ETA is late December
Dobinsons UCA Ball Joint for Tacoma Hilux and Fortuner
- Suits Dobinsons UCA’s that fit Toyota Tacoma 2nd and 3rd Gen, Toyota Fortuner 2005-2023, Toyota Hilux 2005-2023
- This ball joint will fit UCA part numbers UCA59-003K, UCA59-203K
- Japanese-made Sankei 555 ball joints, fully sealed for maintenance free life
- Sold individually
- Includes new ball joint, boot, split pin and nut (subject to design changes)
Rated 5.00 out of 5
(6 reviews)
$70.00 Add to cart
MRA Remote Resi 3-Way Adjustable Monotube
FREE SHIPPING
within 48 US States
Dobinsons 2.6″ 3-Way Adjustable Front Long Travel Coilovers Pair | Toyota & Lexus
- Dobinsons Long Travel Coilovers for the front of Toyota and Lexus Trucks and SUV’s
- Intended to be used on 4th and 5th Gen 4Runners, Lexus GX470 and GX460, FJ Cruisers, and Toyota Tacoma 2nd and 3rd Gens – with all Long Travel Parts Installed (upper and lower arms, axles, custom bump stops, limit straps, etc)
- Includes Different bolt pattern adapters for Top mount plate
- Specifications: 602mm (23.7″) extended, 399 mm (15.7″) compressed, uses 1.5″ long x 1/2″ Bolt for lower mounting
- Pair of Coilover Struts only, no coils included
- Height adjustable with a fully threaded body
- Massive 66mm (2.6″) Outer body with 60mm (2.36″) Bore and Piston
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 60mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 66mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI™ CNC machined components for precise tolerances
- Parker™ Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Does not include coil springs – sold separately
- These can only be run with aftermarket UCA’s for coilover clearance and full long travel lower arms – they will not work with OEM sized upper or lower arms
- Recommended Coils to run with these:
  
  C92-3016550 | Inner Diameter – 3.0″ | Length – 16″ | Spring Rate – 550lb/in
  
  C92-3016600 | Inner Diameter – 3.0″ | Length – 16″ | Spring Rate – 600lb/in
  
  C92-3016650 | Inner Diameter – 3.0″ | Length – 16″ | Spring Rate – 650lb/in
Rated 5.00 out of 5
(9 reviews)
$1,790.00 Add to cart
Suspension
Dobinsons Jeep JL JT Front Track Bar Axle Bracket Kit (3–4.5” Lift)
- Suits Jeep Wrangler JL and Gladiator JT with 3.0-4.5″ of Lift
- The Dobinsons Jeep JL/JT Front Track Bar Axle Bracket Kit corrects vehicle roll center
- Corrects steering geometry eliminating bump steer and other front-end issues
- Restores factory handling
- Prevents Coil Bowing
- Reduces body roll on lifted JL Wrangler/Unlimited and Gladiator models
- Bolt-on bracket mounts to the front axle
- Black Powder Coat finish
- Drilling is required
Rated 5.00 out of 5
(9 reviews)
$75.00 Add to cart
4Runner 5th Gen (2010-2024)
FREE SHIPPING
within 48 US States
Dobinsons 3″ Long Travel 4Runner IMS Suspension Kit for 2010-24
- Suits Toyota 4Runner 5th Gen 4×4 from 2010 to 2024, without KDSS only
- Extended Travel front struts and Long Travel Rear shocks along with all related components are listed on this page
- Maximize the suspension travel of your Toyota 4Runner for the most flex and travel you can get from bolt-on parts
- Complete suspension kit for 4×4 Off Road Use, fine tuned to match the vehicle
- Coils are specifically suited to the additional accessory load (weight) on the vehicle
- Lifting 3″ front and rear maintains factory rake
- Dobinsons have the largest selection of front and rear coils for 4Runners and in multiple colors
- Add up how much accessory weight you have on the front and then the rear, that’s your constant load
- Then choose the lift height from the coils that most closely matches the added weight
- Fully rebuildable and re-valvable shocks and struts
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Instructions for setting coil seat height
- High Quality Australian-made coil springs, heat treated, fully scragged, powder coated
- Option to have the front struts preassembled prior to shipping to make installation easier at home
- You choose what options you want, nothing is provided if it is not listed once you have selected it
- Suspension Installation Video
- Lift heights are based on the standard 20″ front and 22″ rear, measured from the center of the hub up to the fender edge. Many vehicles come in at different heights from the factory based on trim levels and options
Rated 5.00 out of 5
(5 reviews)
From $4,587.72 Select options
On Backorder
LX600
FREE SHIPPING
within 48 US States
Dobinsons Billet Aluminum UCA’s Pair | LX600 LC300 LC250 Tacoma
- Super strong billet aluminum front upper control arms (UCA’s)
- Suits 2022+ Lexus LX600 and 2021+ Toyota Land Cruiser 300 Series (not sold in the USA) and 2024+ Toyota Tacoma, 250 Series Land Cruiser 2024+
- Complete kit for both left and right hand side
- OE-style sealed ball joints for a maintenance free life
- OE-style high quality rubber bushings for maximum NVH dampening and longevity
- No greasing or maintenance required at all, completely noise-free operation
- Adjustable on-vehicle for quick and easy alignment.
- Adjustable Camber and Caster for perfecting the vehicle’s handling
- O-ring sealed ball joint cap for protection against the elements
- Works for any lift height of 1.5″ or more
- *Must reuse OEM Washers
- Installation Instructions
- We recommend visiting an offroad specific shop for alignment, a regular alignment shop may not be able to adjust and align properly due to the added adjustability these arms offer
- Photos for illustration purposes
(0 reviews)
$1,195.00 Add to cart
Full Suspension Kits - Frontier D40
FREE SHIPPING
within 48 US States
Dobinsons Nissan Frontier D40 MRA 3-Way Adjustable Kit | 2005-2021
- Complete Dobinsons MRA 3-Way Adjustable Suspension Kit for your 2005-2021 Nissan Frontier D40 4×4 Truck
- Choose what front and rear lift heights and load ratings you would like
- Adjustable height front struts (requires coil to be compressed above the coil seat to adjust height)
- 3-way Adjustable shocks provide maximum adjustability to provide the perfect ride quality for you.
- 10 Stage High Speed Compression – For aggressive, high speed off roading through ruts and holes.
- 20 Stage Low Speed Compression – For creepy crawling and cornering
- 15 Stage Rebound – Control your coils, prevent bucking
- 50mm CNC Machined High Flow Billet Aluminum Race Piston
- 3mm Thick Heavy Duty DOM Seamless 56mm O.D. shock Body Precision Honed to +/- 0.04mm
- Upgraded 3 Stage FKM‐HNBR Sealing System
- TSUGAMI CNC machined components for precise tolerances
- Parker Braided High Pressure Hoses
- 5140 HV900 Hard Chrome Plated, Heat treated 18mm Micro-Polished high strength Shock Shaft with a minimum tensile
- strength exceeding 700MPA
- T6 6061 Height Adjustable Spring Seat
- Carbon-Fibre/PTFE/Disulphide composite wear band for the ultimate in low-friction, low‐wear performance
- 60mm Full 6063 aluminum remote reservoir
- Lightweight CNC Machined Low Friction floating piston
- High Quality O.E.M. Grade Natural Rubber Bushings
- Single Piece Lower Leg
- EDP Surface Protection
- Direct Bolt-On Design
- CNC TIG Precision Welded Body End Mounts
- Fully Rebuildable Design
- Includes Reservoir Brackets and Hardware, Sticker Pack, and Adjuster Wrench
- Full 2 year limited warranty, no set rebuild time period
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO 9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride
Rated 5.00 out of 5
(5 reviews)
From $3,320.00 Select options
Full Suspension Kits - Frontier D40
Dobinsons Nissan Frontier D40 Lift Kit 2-2.5″ IMS | 2005-2021
- Complete Dobinsons IMS Suspension Kit for your 2005-2021 Nissan Frontier D40 4×4 Truck
- Choose what front and rear lift heights and load ratings you would like
- Choose from regular or extended travel front struts!!
- Fully rebuildable and re-valvable
- Adjustable height front struts (requires coil to be compressed above the coil seat to adjust height)
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg, Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Made from the highest quality raw materials to give years of life under the harshest conditions
- Over 60 years of leaf spring design and manufacturing
- Design features include Drawn, tapered and thinned leaf ends
- Manufactured to international quality standards ISO 9001:2008 using premium grade Sup 9 silicon manganese spring steel,
- Anti-Friction inter leaf liners are use to reduce the friction at each leaf end where the load is creates and provides a smoother, quieter ride.
Rated 5.00 out of 5
(5 reviews)
From $2,120.00 Select options
Full Suspension Kits - Frontier D40
Dobinsons IMS Extended Travel Coilovers for Nissan Frontier D40 2005-2021
- Extended Travel Coilovers Suit Nissan Frontier D40 4×4 Models 2005 to 2021 – lifts 2-2.5″ depending on selections made below
- These extended travel struts REQUIRE aftermarket UCA’s for full travel, like Dobinsons
- Looking for a quick and easy way to lift your Frontier? This is your answer
- Dobinsons IMS are height adjustable by a fully threaded body
- The Dobinsons IMS Coilovers will come pre-assembled with new struts, coils and top mounts
- Fully rebuildable and re-valvable
- SOLD IN PAIRS – READY TO BOLT IN
- Zero shock fade in all terrains with full load
- Direct, bolt-on replacement for easy fitment
- IFP – Internal Floating Piston, separates oil and nitrogen
- Corrosion resistant (EDP Surface Protection)
- Heavy duty single piece lower leg
- Enormous oil capacity
- Heavy Duty 3 Stage FKM HNBR Sealing System for the ultimate in reliability
- Race inspired hi-flow CNC 6061 Billet alloy piston – for the ultimate in offroad handling
- 56mm/2.2” Bodied Series – 50mm hi-flow CNC 6061 Billet alloy piston – 50mm bore – Vehicle specific fitment
- Full 2 year limited warranty, no set rebuild time period
- Length specs – 278mm compressed and 410mm extended
- Photos for illustration purposes
- Instructions for setting coil seat height
- Link to the matching rear shocks
- Please NOTE: Assembled coilovers cannot be returned, as they are made to order
Rated 5.00 out of 5
(8 reviews)
From $1,165.00 Select options